Hi db91595,
tja da fängt das Problem an^^
habe das nur so beim rumgoogeln zufällig auf der Creality Seite gefunden für Ubuntu halt wie es aussieht.
Dokumentation von Creality Seite = Fehlanzeige
Eigentlich sollte den Slicer für den 3D Drucker öffnen wo ich dann meine Modelle reinlegen kann, ausführbar wurde es schon gemacht.
Es startet und er versucht anscheinend Druckerprofile zu laden. Dann beendet sich halt einfach wieder mit der Speicherfehlermeldung in der
Konsole.
Leider kann ich das Logfile hier wegen übergrösse nicht einstellen 250.000 Zeichen von 60.000
Code: Select all
[2022-09-25 11:54:41.249] [cxlog] [debug] ["----------> START LOG <-----------"]
[2022-09-25 11:54:41.249] [cxlog] [debug] [OS LINUX pre setDynamicLoadPath]
[2022-09-25 11:54:41.249] [cxlog] [debug] [Linux get the APPDIR : "/tmp/.mount_CrealihQY2Hd"]
[2022-09-25 11:54:41.252] [cxlog] [debug] [Pre Dynamic import paths:]
[2022-09-25 11:54:41.252] [cxlog] [debug] [("/tmp/.mount_CrealihQY2Hd/plugins")]
[2022-09-25 11:54:41.380] [cxlog] [debug] [applicationDir "/tmp/.mount_CrealihQY2Hd"]
[2022-09-25 11:54:41.380] [cxlog] [debug] [OS LINUX setDynamicLoadPath]
[2022-09-25 11:54:41.380] [cxlog] [debug] [Qml import paths:]
[2022-09-25 11:54:41.380] [cxlog] [debug] [("/tmp/.mount_CrealihQY2Hd", "qrc:/qt-project.org/imports", "/tmp/.mount_CrealihQY2Hd/qml", "/tmp/.mount_CrealihQY2Hd/lib/", "/tmp/.mount_CrealihQY2Hd/qml/")]
[2022-09-25 11:54:41.380] [cxlog] [debug] [Dynamic import paths:]
[2022-09-25 11:54:41.380] [cxlog] [debug] [("/tmp/.mount_CrealihQY2Hd/plugins", "/tmp/.mount_CrealihQY2Hd/plugins", "/tmp/.mount_CrealihQY2Hd", "/tmp/.mount_CrealihQY2Hd", "/tmp/.mount_CrealihQY2Hd/lib/")]
[2022-09-25 11:54:41.381] [cxlog] [debug] [start...]
[2022-09-25 11:54:41.381] [cxlog] [debug] ["/home/stephan/.local/share/Creality/Creative3D/sliceconfig"]
[2022-09-25 11:54:41.394] [cxlog] [debug] [settings initialize over]
[2022-09-25 11:54:41.458] [cxlog] [debug] [--------------------------------]
[2022-09-25 11:54:41.458] [cxlog] [debug] [buildAbi: "x86_64-little_endian-lp64"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [buildCpuArchitecture: "x86_64"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [currentCpuArchitecture: "x86_64"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [kernelType: "linux"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [kernelVersion: "5.15.0-48-generic"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [machineHostName: "stephan-Lenovo-V15-ADA"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [prettyProductName: "Linux Mint 21"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [productType: "linuxmint"]
[2022-09-25 11:54:41.458] [cxlog] [debug] [productVersion: "21"]
[2022-09-25 11:54:41.458] [cxlog] [debug] ["" -1 -1 -1]
[2022-09-25 11:54:41.458] [cxlog] [debug] [--------------------------------
]
[2022-09-25 11:54:41.458] [cxlog] [debug] [write_folder = "/home/stephan/.local/share/Creality/Creative3D"]
[2022-09-25 11:54:41.463] [cxlog] [debug] [install command]
[2022-09-25 11:54:41.464] [cxlog] [debug] [start add commands list]
[2022-09-25 11:54:41.469] [cxlog] [debug] [kernelUI constructor over]
[2022-09-25 11:54:41.490] [cxlog] [debug] [remove all buttons but last one]
[2022-09-25 11:54:41.512] [cxlog] [debug] [remove all buttons but last one]
[2022-09-25 11:54:41.537] [cxlog] [debug] [remove all commands]
[2022-09-25 11:54:41.537] [cxlog] [debug] [remove all commands]
[2022-09-25 11:54:41.537] [cxlog] [debug] [add commands list over. total have add 0 commands]
[2022-09-25 11:54:41.537] [cxlog] [debug] [install rclick menu]
[2022-09-25 11:54:41.537] [cxlog] [debug] [DeleteModelAction init success!!]
[2022-09-25 11:54:41.549] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/manipulate.geom"]
[2022-09-25 11:54:41.549] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/manipulate.tcs"]
[2022-09-25 11:54:41.549] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/manipulate.tes"]
[2022-09-25 11:54:41.549] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pickFace.geom"]
[2022-09-25 11:54:41.549] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pickFace.tcs"]
[2022-09-25 11:54:41.549] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pickFace.tes"]
[2022-09-25 11:54:41.550] [cxlog] [debug] [remove all commands]
[2022-09-25 11:54:41.641] [cxlog] [debug] [Surface setClearColor QColor(ARGB 0, 0, 0, 0)]
[2022-09-25 11:54:41.645] [cxlog] [debug] [ColorPicker::setTextureRenderTarget QObject(0x0)]
[2022-09-25 11:54:41.651] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelwireframe.tcs"]
[2022-09-25 11:54:41.651] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelwireframe.tes"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/support.geom"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/support.tcs"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/support.tes"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pickFaceFlag.geom"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pickFaceFlag.tcs"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pickFaceFlag.tes"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelline.geom"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelline.tcs"]
[2022-09-25 11:54:41.652] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelline.tes"]
[2022-09-25 11:54:41.662] [cxlog] [debug] [remove all commands]
[2022-09-25 11:54:41.662] [cxlog] [debug] [install UI]
[2022-09-25 11:54:41.662] [cxlog] [debug] [current path application dir = "/tmp/.mount_CrealihQY2Hd"]
[2022-09-25 11:54:41.662] [cxlog] [debug] [current path current = "/home/stephan/Downloads"]
[2022-09-25 11:54:42.103] [cxlog] [debug] [current path application dir = "/tmp/.mount_CrealihQY2Hd"]
[2022-09-25 11:54:42.103] [cxlog] [debug] [current path current = "/home/stephan/Downloads"]
[2022-09-25 11:54:43.133] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pure.geom"]
[2022-09-25 11:54:43.133] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pure.tcs"]
[2022-09-25 11:54:43.133] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/pure.tes"]
[2022-09-25 11:54:43.133] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/printergrid.geom"]
[2022-09-25 11:54:43.133] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/printergrid.tcs"]
[2022-09-25 11:54:43.133] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/printergrid.tes"]
[2022-09-25 11:54:43.134] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/printerbottom.geom"]
[2022-09-25 11:54:43.134] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/printerbottom.tcs"]
[2022-09-25 11:54:43.134] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/printerbottom.tes"]
[2022-09-25 11:54:43.134] [cxlog] [warning] [libpng warning: iCCP: known incorrect sRGB profile]
[2022-09-25 11:54:43.143] [cxlog] [debug] [CreativePluginCenter nameFilters : ("libplugin*.so")]
[2022-09-25 11:54:43.143] [cxlog] [debug] [CreativePluginCenter searchPathes : ("/tmp/.mount_CrealihQY2Hd/plugins", "/tmp/.mount_CrealihQY2Hd/plugins", "/tmp/.mount_CrealihQY2Hd", "/tmp/.mount_CrealihQY2Hd", "/tmp/.mount_CrealihQY2Hd/lib/")]
[2022-09-25 11:54:43.144] [cxlog] [debug] ["CreativePluginCenter try find in path: [/tmp/.mount_CrealihQY2Hd/plugins]->[0]"]
[2022-09-25 11:54:43.144] [cxlog] [debug] ["CreativePluginCenter try find in path: [/tmp/.mount_CrealihQY2Hd/plugins]->[0]"]
[2022-09-25 11:54:43.145] [cxlog] [debug] ["CreativePluginCenter try find in path: [/tmp/.mount_CrealihQY2Hd]->[0]"]
[2022-09-25 11:54:43.145] [cxlog] [debug] ["CreativePluginCenter try find in path: [/tmp/.mount_CrealihQY2Hd]->[0]"]
[2022-09-25 11:54:43.145] [cxlog] [debug] ["CreativePluginCenter try find in path: [/tmp/.mount_CrealihQY2Hd/lib/]->[13]"]
[2022-09-25 11:54:43.150] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_cx3d_exporter.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.154] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_extend_mesh.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.156] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_info.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.176] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_laser.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.184] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_letter.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.189] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_localnet.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.191] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_log.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.252] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_meshio_common.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.254] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_pick_bottom.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.258] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_repairnew.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.261] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_simple_support.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.326] [cxlog] [debug] [sendcorebu Myrunthread(0x2326c00)]
[2022-09-25 11:54:43.326] [cxlog] [debug] [CXMsgCbImpl set Myrunthread(0x2326c00)]
[2022-09-25 11:54:43.326] [cxlog] [debug] [running Myrunthread(0x2326c00) Myrunthread(0x2326c00)]
[2022-09-25 11:54:43.326] [cxlog] [debug] [has QCoreApplication::instance()]
[2022-09-25 11:54:43.425] [cxlog] [debug] [Mysender QThread(0x95dec0)]
[2022-09-25 11:54:43.428] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/slicepreviewNoTess.geom"]
[2022-09-25 11:54:43.428] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/slicepreviewNoTess.tcs"]
[2022-09-25 11:54:43.428] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/slicepreviewNoTess.tes"]
[2022-09-25 11:54:43.429] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelsimple.geom"]
[2022-09-25 11:54:43.429] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelsimple.tcs"]
[2022-09-25 11:54:43.429] [cxlog] [warning] [Could not read shader source file: ":/renderhelper/shaders/modelsimple.tes"]
[2022-09-25 11:54:43.429] [cxlog] [debug] [Surface setClearColor QColor(ARGB 0, 0, 0, 0)]
[2022-09-25 11:54:43.430] [cxlog] [debug] [ColorPicker::useSelfCameraSelector true]
[2022-09-25 11:54:43.430] [cxlog] [debug] [ColorPicker::setFilterKey "r2t" = 0]
[2022-09-25 11:54:43.430] [cxlog] [debug] [ColorPicker::setClearColor QColor(ARGB 0, 0, 0, 0)]
[2022-09-25 11:54:43.430] [cxlog] [debug] [ColorPicker::resize QSize(400, 300)]
[2022-09-25 11:54:43.430] [cxlog] [debug] [ColorPicker::setTextureRenderTarget QObject(0x0)]
[2022-09-25 11:54:43.430] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_slice_fdm.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.443] [cxlog] [debug] ["/tmp/.mount_CrealihQY2Hd/lib/libplugin_split.so" QPluginLoader sucess.]
[2022-09-25 11:54:43.452] [cxlog] [debug] [imagePathPrefix =file:///./photo/]
[2022-09-25 11:54:43.452] [cxlog] [debug] [onCompleted-currentTheme: -1]
[2022-09-25 11:54:43.516] [cxlog] [debug] [windows GLQuickItem --> QThread(0x95dec0)]
[2022-09-25 11:54:43.732] [cxlog] [debug] [Source Han Sans CN]
[2022-09-25 11:54:43.732] [cxlog] [debug] [qrc:/UI/fonts/]
[2022-09-25 11:54:43.875] [cxlog] [debug] [Preview way changed !!]
[2022-09-25 11:54:43.885] [cxlog] [debug] [Preview way changed !!]
Hier mal ein Auszug aus dem log file, viele Nachrichten wie das mit dem renderhelper wiederholen sich ständig.
Grüße Stephan