Problema Kaffeine non trova canali Mate 13, 17, 18

Italian Forum
Pao1o
Level 1
Level 1
Posts: 10
Joined: Thu May 01, 2014 12:35 pm

Problema Kaffeine non trova canali Mate 13, 17, 18

Postby Pao1o » Thu Oct 05, 2017 6:02 am

Buongiorno a tutti, ho un problema con kaffeine e scheda dvb che mi porto dietro da parecchio.
Praticamente sono riuscito a farla funzionare una sola volta su mate 17, , dopo di ciò, cliccando sulla lista canali e scegliendo un canale, la barra del segnale rimaneva vuota e il canale nero.
Idem con mate 13 e 18.
Premetto che con windows vedo la tv, la scheda funziona, credo che in linux sia un problema di driver o di firmware, ma non so proprio come risolvere.
Ho chiesto aiuto in altri forum, ma senza risultato, spero voi possiate aiutarmi.
Se faccio un nuovo scan con Kaffeine, non mi trova nessun canale, benchè dica che il segnale è ok e in configura televisione, mi venga indicata la scheda (vedi allegato)
Con Me tv, invece, non trova neanche il segnale, lo stesso con w-scan (couldn't get any working frequency/transponder. Nothing to scan!!)
Pensando fosse un problema di kernel, mi sono installato, in altra partizione Mint mate 18, ma non è cambiato nulla.
Non sono molto bravo, vi riporto alcuni comandi che spero vi possano aiutare a capire il problema

Code: Select all

    [    1.744594] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.745548] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.745749] mousedev: PS/2 mouse device common for all mice
    [    1.745971] rtc_cmos 00:01: RTC can wake from S4
    [    1.746161] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [    1.746203] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
    [    1.746219] i2c /dev entries driver
    [    1.746343] device-mapper: uevent: version 1.0.3
    [    1.746471] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
    [    1.746512] platform eisa.0: Probing EISA bus 0
    [    1.746517] platform eisa.0: EISA: Cannot allocate resource for mainboard
    [    1.746521] platform eisa.0: Cannot allocate resource for EISA slot 1
    [    1.746524] platform eisa.0: Cannot allocate resource for EISA slot 2
    [    1.746527] platform eisa.0: Cannot allocate resource for EISA slot 3
    [    1.746530] platform eisa.0: Cannot allocate resource for EISA slot 4
    [    1.746533] platform eisa.0: Cannot allocate resource for EISA slot 5
    [    1.746536] platform eisa.0: Cannot allocate resource for EISA slot 6
    [    1.746540] platform eisa.0: Cannot allocate resource for EISA slot 7
    [    1.746543] platform eisa.0: Cannot allocate resource for EISA slot 8
    [    1.746545] platform eisa.0: EISA: Detected 0 cards
    [    1.746565] cpufreq-nforce2: No nForce2 chipset.
    [    1.746577] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.747095] NET: Registered protocol family 10
    [    1.747518] NET: Registered protocol family 17
    [    1.747542] Key type dns_resolver registered
    [    1.747778] microcode: AMD CPU family 0xf not supported
    [    1.747796] Using IPI No-Shortcut mode
    [    1.748093] registered taskstats version 1
    [    1.748122] Loading compiled-in X.509 certificates
    [    1.752158] Loaded X.509 cert 'Build time autogenerated kernel key: 576c2769d802b088727292ebeb868e043bc4124c'
    [    1.752187] zswap: loaded using pool lzo/zbud
    [    1.755586] Key type trusted registered
    [    1.761751] Key type encrypted registered
    [    1.761771] AppArmor: AppArmor sha1 policy hashing enabled
    [    1.761777] ima: No TPM chip found, activating TPM-bypass!
    [    1.761829] evm: HMAC attrs: 0x1
    [    1.762230]   Magic number: 5:35:826
    [    1.762413] rtc_cmos 00:01: setting system clock to 2017-10-05 08:48:03 UTC (1507193283)
    [    1.806130] isapnp: No Plug & Play device found
    [    1.806402] powernow_k8: fid 0xc (2000 MHz), vid 0x6
    [    1.806404] powernow_k8: fid 0xa (1800 MHz), vid 0x8
    [    1.806406] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
    [    1.806441] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
    [    1.806451] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.806453] EDD information not available.
    [    1.806554] PM: Hibernation image not present or could not be loaded.
    [    1.807692] Freeing unused kernel memory: 940K (c1b91000 - c1c7c000)
    [    1.807780] Write protecting the kernel text: 7912k
    [    1.807816] Write protecting the kernel read-only data: 3156k
    [    1.807818] NX-protecting the kernel data: 6424k
    [    1.818932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.831265] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.831385] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.831556] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.831661] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.831779] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.831877] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.831979] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.833137] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.833287] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.833332] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
    [    1.934323] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
    [    1.955302] sata_sil 0000:00:12.0: version 2.4
    [    1.983694] scsi host0: sata_sil
    [    1.997237] scsi host1: sata_sil
    [    1.997385] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
    [    1.997389] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
    [    2.011371] scsi host2: pata_atiixp
    [    2.016071] scsi host3: pata_atiixp
    [    2.016204] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [    2.016208] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [    2.021665] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [    2.021675] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    [    2.042863] 8139too: 8139too Fast Ethernet driver 0.9.28
    [    2.049685] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0001df00, 00:16:17:5a:51:76, IRQ 20
    [    2.071977] [drm] Initialized drm 1.1.0 20060810
    [    2.120211] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [    2.177544] 8139too 0000:02:03.0 enp2s3: renamed from eth0
    [    2.181500] ata3.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
    [    2.181507] ata3.00: 976773168 sectors, multi 16: LBA48
    [    2.181517] ata3.01: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB06, max UDMA/33
    [    2.181523] ata3.00: limited to UDMA/33 due to 40-wire cable
    [    2.181635] ata4.00: ATA-5: MAXTOR 6L040J2, A93.0500, max UDMA/133
    [    2.181637] ata4.00: 78177792 sectors, multi 16: LBA
    [    2.181642] ata4.00: limited to UDMA/33 due to 40-wire cable
    [    2.197797] ata3.00: configured for UDMA/33
    [    2.197879] ata4.00: configured for UDMA/33
    [    2.198956] wmi: Mapper loaded
    [    2.267916] usb 2-3: new full-speed USB device number 2 using ohci-pci
    [    2.267994] ata3.01: configured for UDMA/33
    [    2.283460] checking generic (d0000000 300000) vs hw (d0000000 10000000)
    [    2.283467] fb: switching to nouveaufb from VESA VGA
    [    2.283529] Console: switching to colour dummy device 80x25
    [    2.284591] nouveau 0000:01:00.0: NVIDIA G72 (046100a3)
    [    2.486699] nouveau 0000:01:00.0: bios: version 05.72.22.34.21
    [    2.486763] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    2.489099] nouveau 0000:01:00.0: fb: 64 MiB DDR2
    [    2.509116] ata1.00: ATA-7: Maxtor 6V160E0, VA111630, max UDMA/133
    [    2.509120] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    2.556043] ata1.00: configured for UDMA/100
    [    2.556291] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6V160E0   1630 PQ: 0 ANSI: 5
    [    2.556748] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [    2.556821] sd 0:0:0:0: [sda] Write Protect is off
    [    2.556825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.556856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.557297] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    2.604062] usb 3-4: new low-speed USB device number 2 using ohci-pci
    [    2.620295] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc0000f8170c, S400
    [    2.636057]  sda: sda1 sda2 < sda5 sda6 >
    [    2.636716] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.732101] usb 2-3: New USB device found, idVendor=058f, idProduct=9360
    [    2.732105] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    2.732108] usb 2-3: Product: USB Reader
    [    2.732110] usb 2-3: Manufacturer:
    [    2.732112] usb 2-3: SerialNumber: 2004888
    [    2.776189] usb-storage 2-3:1.0: USB Mass Storage device detected
    [    2.824122] scsi host4: usb-storage 2-3:1.0
    [    2.824469] usbcore: registered new interface driver usb-storage
    [    2.844392] usbcore: registered new interface driver uas
    [    2.892083] ata2: SATA link down (SStatus 0 SControl 300)
    [    2.892348] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 4E05 PQ: 0 ANSI: 5
    [    2.892746] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
    [    2.892817] sd 2:0:0:0: [sdb] Write Protect is off
    [    2.892821] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    2.892853] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.893293] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    2.924135] usb 3-4: New USB device found, idVendor=0e8f, idProduct=00a5
    [    2.924142] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    2.924145] usb 3-4: Product: 2.4G RX
    [    2.924148] usb 3-4: Manufacturer: DaKai
    [    2.924824] scsi 2:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB06 PQ: 0 ANSI: 5
    [    2.978369] hidraw: raw HID events driver (C) Jiri Kosina
    [    3.008059]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
    [    3.024063] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    3.024070] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    3.024349] sd 2:0:0:0: [sdb] Attached SCSI disk
    [    3.024447] sr 2:0:1:0: Attached scsi CD-ROM sr0
    [    3.024654] sr 2:0:1:0: Attached scsi generic sg2 type 5
    [    3.024889] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR 6L040J2   0500 PQ: 0 ANSI: 5
    [    3.025221] sd 3:0:0:0: [sdc] 78177792 512-byte logical blocks: (40.0 GB/37.3 GiB)
    [    3.025289] sd 3:0:0:0: [sdc] Write Protect is off
    [    3.025293] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    3.025323] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.025816] sd 3:0:0:0: Attached scsi generic sg3 type 0
    [    3.045649] usbcore: registered new interface driver usbhid
    [    3.045654] usbhid: USB HID core driver
    [    3.056686]  sdc: sdc1 sdc2 < sdc5 >
    [    3.057269] sd 3:0:0:0: [sdc] Attached SCSI disk
    [    3.074682] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.0/0003:0E8F:00A5.0001/input/input3
    [    3.135522] hid-generic 0003:0E8F:00A5.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:13.1-4/input0
    [    3.137626] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.1/0003:0E8F:00A5.0002/input/input4
    [    3.201328] hid-generic 0003:0E8F:00A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:13.1-4/input1
    [    3.520495] random: nonblocking pool is initialized
    [    3.888091] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
    [    3.908180] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
    [    3.930414] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
    [    3.932718] [TTM] Zone  kernel: Available graphics memory: 436738 kiB
    [    3.932725] [TTM] Zone highmem: Available graphics memory: 1290214 kiB
    [    3.932727] [TTM] Initializing pool allocator
    [    3.932737] [TTM] Initializing DMA pool allocator
    [    3.932766] nouveau 0000:01:00.0: DRM: VRAM: 60 MiB
    [    3.932769] nouveau 0000:01:00.0: DRM: GART: 512 MiB
    [    3.932777] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
    [    3.932781] nouveau 0000:01:00.0: DRM: DCB version 3.0
    [    3.932785] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
    [    3.932790] nouveau 0000:01:00.0: DRM: DCB outp 01: 020213f1 00a0c070
    [    3.932793] nouveau 0000:01:00.0: DRM: DCB conn 00: 0100
    [    3.932796] nouveau 0000:01:00.0: DRM: DCB conn 01: 0210
    [    3.932799] nouveau 0000:01:00.0: DRM: DCB conn 02: 0211
    [    3.936517] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    3.936523] [drm] Driver supports precise vblank timestamp query.
    [    3.938959] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
    [    3.942980] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
    [    3.943001] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 1)
    [    3.944849] sd 4:0:0:0: Attached scsi generic sg4 type 0
    [    3.945161] sd 4:0:0:1: Attached scsi generic sg5 type 0
    [    3.945432] sd 4:0:0:2: Attached scsi generic sg6 type 0
    [    3.945709] sd 4:0:0:3: Attached scsi generic sg7 type 0
    [    4.028669] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x9000, bo f59c1c00
    [    4.032144] fbcon: nouveaufb (fb0) is primary device
    [    4.032431] Console: switching to colour frame buffer device 128x48
    [    4.032474] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [    4.032482] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
    [    4.071115] sd 4:0:0:1: [sde] Attached SCSI removable disk
    [    4.081103] sd 4:0:0:2: [sdf] Attached SCSI removable disk
    [    4.091102] sd 4:0:0:3: [sdg] Attached SCSI removable disk
    [    4.111109] sd 4:0:0:0: [sdd] Attached SCSI removable disk
    [    5.040052] floppy0: no floppy controllers found
    [    6.288054] raid6: mmxx1    gen()  1648 MB/s
    [    6.356027] raid6: mmxx2    gen()  3008 MB/s
    [    6.424037] raid6: sse1x1   gen()  1433 MB/s
    [    6.492014] raid6: sse1x2   gen()  2215 MB/s
    [    6.560036] raid6: sse2x1   gen()  2278 MB/s
    [    6.628014] raid6: sse2x1   xor()  2213 MB/s
    [    6.696032] raid6: sse2x2   gen()  2890 MB/s
    [    6.764015] raid6: sse2x2   xor()  2398 MB/s
    [    6.832025] raid6: int32x1  gen()   744 MB/s
    [    6.900072] raid6: int32x1  xor()   489 MB/s
    [    6.968036] raid6: int32x2  gen()  1043 MB/s
    [    7.036041] raid6: int32x2  xor()   665 MB/s
    [    7.104040] raid6: int32x4  gen()   843 MB/s
    [    7.172025] raid6: int32x4  xor()   626 MB/s
    [    7.240022] raid6: int32x8  gen()   759 MB/s
    [    7.308072] raid6: int32x8  xor()   507 MB/s
    [    7.308074] raid6: using algorithm mmxx2 gen() 3008 MB/s
    [    7.308076] raid6: using intx1 recovery algorithm
    [    7.315266] xor: measuring software checksum speed
    [    7.352013]    pIII_sse  :  6009.000 MB/sec
    [    7.392012]    prefetch64-sse:  6014.000 MB/sec
    [    7.392014] xor: using function: prefetch64-sse (6014.000 MB/sec)
    [    7.460304] Btrfs loaded
    [    8.955653] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
    [    9.929314] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
    [    9.929509] systemd[1]: Detected architecture x86.
    [    9.930016] systemd[1]: Set hostname to <paolo-mate18>.
    [   11.371186] systemd[1]: Listening on Journal Audit Socket.
    [   11.371361] systemd[1]: Listening on LVM2 poll daemon socket.
    [   11.371434] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [   11.371507] systemd[1]: Listening on Journal Socket (/dev/log).
    [   11.371717] systemd[1]: Created slice System Slice.
    [   11.371809] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [   11.371930] systemd[1]: Created slice User and Session Slice.
    [   11.371967] systemd[1]: Reached target User and Group Name Lookups.
    [   11.372127] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [   11.372161] systemd[1]: Reached target Encrypted Volumes.
    [   11.372239] systemd[1]: Listening on Journal Socket.
    [   11.388732] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [   11.390252] systemd[1]: Started Braille Device Support.
    [   11.395723] systemd[1]: Started Read required files in advance.
    [   11.398796] systemd[1]: Mounting Huge Pages File System...
    [   11.517067] systemd[1]: Starting Load Kernel Modules...
    [   11.517280] systemd[1]: Listening on LVM2 metadata daemon socket.
    [   11.518436] systemd[1]: Mounting Debug File System...
    [   11.518614] systemd[1]: Listening on udev Kernel Socket.
    [   11.520267] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
    [   11.520344] systemd[1]: Reached target Slices.
    [   11.520541] systemd[1]: Listening on fsck to fsckd communication Socket.
    [   11.521683] systemd[1]: Mounting POSIX Message Queue File System...
    [   11.523093] systemd[1]: Starting Set console keymap...
    [   11.523282] systemd[1]: Listening on Syslog Socket.
    [   11.543552] systemd[1]: Starting Uncomplicated firewall...
    [   11.543733] systemd[1]: Listening on udev Control Socket.
    [   11.543804] systemd[1]: Reached target Remote File Systems (Pre).
    [   11.543866] systemd[1]: Reached target Remote File Systems.
    [   11.545328] systemd[1]: Starting Journal Service...
    [   11.545798] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [   11.764656] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [   11.803595] systemd[1]: Started Uncomplicated firewall.
    [   11.863226] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   11.881238] systemd[1]: Mounted Huge Pages File System.
    [   11.882315] systemd[1]: Mounted Debug File System.
    [   11.883233] systemd[1]: Mounted POSIX Message Queue File System.
    [   12.173922] lp: driver loaded but no devices found
    [   12.275589] ppdev: user-space parallel port driver
    [   12.336800] systemd[1]: Started LVM2 metadata daemon.
    [   12.345998] parport_pc 00:03: reported by Plug and Play ACPI
    [   12.346096] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
    [   12.427381] systemd[1]: Started Journal Service.
    [   12.440277] lp0: using parport0 (interrupt-driven).
    [   14.325458] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
    [   14.617390] systemd-journald[339]: Received request to flush runtime journal from PID 1
    [   16.036667] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0
    [   16.116841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   18.052654] media: Linux media interface: v0.10
    [   18.117129] Linux video capture interface: v2.00
    [   18.423846] EDAC MC: Ver: 3.0.0
    [   18.599949] MCE: In-kernel MCE decoding enabled.
    [   18.647964] AMD64 EDAC driver v3.4.0
    [   18.648226] EDAC amd64: DRAM ECC disabled.
    [   18.648232] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                    (Note that use of the override may cause unknown side effects.)
    [   18.840186] floppy0: no floppy controllers found
    [   18.959041] Adding 3405820k swap on /dev/sdb6.  Priority:-1 extents:1 across:3405820k FS
    [   18.982826] ath5k 0000:02:01.0: registered as 'phy0'
    [   19.038159] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
    [   19.323257] cgroup: new mount options do not match the existing superblock, will be ignored
    [   20.120578] ath: EEPROM regdomain: 0x67
    [   20.120585] ath: EEPROM indicates we should expect a direct regpair map
    [   20.120590] ath: Country alpha2 being used: 00
    [   20.120592] ath: Regpair used: 0x67
    [   20.218074] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   20.219117] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa2, PHY: 0x61)
    [   20.219331] saa7134: saa7134[0]: found at 0000:02:00.0, rev: 1, irq: 20, latency: 64, mmio: 0xfdeff000
    [   20.219342] saa7134: saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM [card=100,autodetected]
    [   20.219370] saa7134: saa7134[0]: board init: gpio is 0
    [   20.276960] ath5k 0000:02:01.0 wlp2s1: renamed from wlan0
    [   20.372067] saa7134: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
    [   20.372074] saa7134: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
    [   20.372076] saa7134: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
    [   20.372078] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372080] saa7134: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
    [   20.372082] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372083] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372085] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372087] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372088] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372090] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372092] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372094] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372095] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372097] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.372099] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   20.524394] tuner 4-0061: Tuner -1 found with type(s) Radio TV.
    [   20.820043] tuner-simple 4-0061: creating new instance
    [   20.820052] tuner-simple 4-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
    [   20.852482] saa7134: saa7134[0]: registered device video0 [v4l2]
    [   20.852658] saa7134: saa7134[0]: registered device vbi0
    [   20.852818] saa7134: saa7134[0]: registered device radio0
    [   20.892552] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded
    [   20.892610] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xfdeff000 irq 20 registered as card -2
    [   21.029118] saa7134_dvb: dvb_init() allocating 1 frontend
    [   21.039826] cfg80211: World regulatory domain updated:
    [   21.039838] cfg80211:  DFS Master region: unset
    [   21.039841] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [   21.039845] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [   21.039848] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [   21.039850] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [   21.039853] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [   21.039856] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [   21.039859] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [   21.039861] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [   21.039864] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [   21.184029] tuner-simple 4-0061: attaching existing instance
    [   21.184038] tuner-simple 4-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
    [   21.184044] DVB: registering new adapter (saa7134[0])
    [   21.184053] saa7134 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
    [   21.232030] tda1004x: setting up plls for 53MHz sampling clock
    [   23.456024] tda1004x: timeout waiting for DSP ready
    [   23.496028] tda1004x: found firmware revision 0 -- invalid
    [   23.496035] tda1004x: trying to boot from eeprom
    [   25.119235] IPv6: ADDRCONF(NETDEV_UP): enp2s3: link is not ready
    [   25.119422] 8139too 0000:02:03.0 enp2s3: link down
    [   25.119582] IPv6: ADDRCONF(NETDEV_UP): enp2s3: link is not ready
    [   25.150753] IPv6: ADDRCONF(NETDEV_UP): wlp2s1: link is not ready
    [   25.163026] IPv6: ADDRCONF(NETDEV_UP): wlp2s1: link is not ready
    [   25.771168] IPv6: ADDRCONF(NETDEV_UP): wlp2s1: link is not ready
    [   25.832027] tda1004x: timeout waiting for DSP ready
    [   25.872025] tda1004x: found firmware revision 0 -- invalid
    [   25.872033] tda1004x: waiting for firmware upload...
    [   25.932989] saa7134 0000:02:00.0: Direct firmware load for dvb-fe-tda10046.fw failed with error -2
    [   25.933043] saa7134 0000:02:00.0: Direct firmware load for dvb-fe-tda10045.fw failed with error -2
    [   25.933048] tda1004x: no firmware upload (timeout or file not found?)
    [   25.933053] tda1004x: firmware upload failed
    [   37.461814] wlp2s1: authenticate with 78:94:b4:6a:43:c3
    [   37.474211] wlp2s1: send auth to 78:94:b4:6a:43:c3 (try 1/3)
    [   37.475756] wlp2s1: authenticated
    [   37.484086] wlp2s1: associate with 78:94:b4:6a:43:c3 (try 1/3)
    [   37.495867] wlp2s1: RX AssocResp from 78:94:b4:6a:43:c3 (capab=0x1401 status=0 aid=3)
    [   37.496079] wlp2s1: associated
    [   37.496177] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s1: link becomes ready
    [   37.520285] ath: EEPROM regdomain: 0x817c
    [   37.520292] ath: EEPROM indicates we should expect a country code
    [   37.520295] ath: doing EEPROM country->regdmn map search
    [   37.520297] ath: country maps to regdmn code: 0x37
    [   37.520299] ath: Country alpha2 being used: IT
    [   37.520301] ath: Regpair used: 0x37
    [   37.520303] ath: regdomain 0x817c dynamically updated by country IE
    [   37.520308] cfg80211: Regulatory domain changed to country: IT
    [   37.520310] cfg80211:  DFS Master region: ETSI
    [   37.520312] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [   37.520316] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [   37.520319] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [   37.520323] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [   37.520326] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
    [   37.520328] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [   37.543367] wlp2s1: Limiting TX power to 20 (20 - 0) dBm as advertised by 78:94:b4:6a:43:c3
    [  190.464031] tda1004x: setting up plls for 53MHz sampling clock
    [  192.692030] tda1004x: timeout waiting for DSP ready
    [  192.732031] tda1004x: found firmware revision 0 -- invalid
    [  192.732038] tda1004x: trying to boot from eeprom
    [  195.056033] tda1004x: timeout waiting for DSP ready
    [  195.096028] tda1004x: found firmware revision 0 -- invalid
    [  195.096033] tda1004x: waiting for firmware upload...
    [  195.096084] saa7134 0000:02:00.0: Direct firmware load for dvb-fe-tda10046.fw failed with error -2
    [  195.096111] saa7134 0000:02:00.0: Direct firmware load for dvb-fe-tda10045.fw failed with error -2
    [  195.096115] tda1004x: no firmware upload (timeout or file not found?)
    [  195.096118] tda1004x: firmware upload failed
    [  495.952042] usb 1-6: new high-speed USB device number 4 using ehci-pci
    [  496.085341] usb 1-6: New USB device found, idVendor=152d, idProduct=2338
    [  496.085349] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=5
    [  496.085355] usb 1-6: Product: USB to ATA/ATAPI bridge
    [  496.085360] usb 1-6: Manufacturer: JMicron
    [  496.085365] usb 1-6: SerialNumber: 142690806022
    [  496.090953] usb-storage 1-6:1.0: USB Mass Storage device detected
    [  496.091510] scsi host5: usb-storage 1-6:1.0
    [  497.088883] scsi 5:0:0:0: Direct-Access     Maxtor 6 Y080L0                PQ: 0 ANSI: 5
    [  497.091350] sd 5:0:0:0: Attached scsi generic sg8 type 0
    [  497.091984] sd 5:0:0:0: [sdh] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB)
    [  497.094760] sd 5:0:0:0: [sdh] Write Protect is off
    [  497.094774] sd 5:0:0:0: [sdh] Mode Sense: 28 00 00 00
    [  497.095855] sd 5:0:0:0: [sdh] No Caching mode page found
    [  497.095865] sd 5:0:0:0: [sdh] Assuming drive cache: write through
    [  497.144504]  sdh: sdh1 < sdh5 sdh6 >
    [  497.150878] sd 5:0:0:0: [sdh] Attached SCSI disk
    [ 1145.326251] usb 1-6: USB disconnect, device number 4
    [ 1351.336054] tda1004x: setting up plls for 53MHz sampling clock
    [ 1353.564032] tda1004x: timeout waiting for DSP ready
    [ 1353.604024] tda1004x: found firmware revision 0 -- invalid
    [ 1353.604029] tda1004x: trying to boot from eeprom
    [ 1355.932031] tda1004x: timeout waiting for DSP ready
    [ 1355.972029] tda1004x: found firmware revision 0 -- invalid
    [ 1355.972034] tda1004x: waiting for firmware upload...
    [ 1355.972088] saa7134 0000:02:00.0: Direct firmware load for dvb-fe-tda10046.fw failed with error -2
    [ 1355.972115] saa7134 0000:02:00.0: Direct firmware load for dvb-fe-tda10045.fw failed with error -2
    [ 1355.972119] tda1004x: no firmware upload (timeout or file not found?)
    [ 1355.972123] tda1004x: firmware upload failed
    paolo@paolo-mate18


Code: Select all

    ~ $ ls -la /dev/dvb/adapter0
    totale 0
    drwxr-xr-x  2 root root     120 ott  5 10:48 .
    drwxr-xr-x  3 root root      60 ott  5 10:48 ..
    crw-rw----+ 1 root video 212, 1 ott  5 10:48 demux0
    crw-rw----+ 1 root video 212, 2 ott  5 10:48 dvr0
    crw-rw----+ 1 root video 212, 0 ott  5 10:48 frontend0
    crw-rw----+ 1 root video 212, 3 ott  5 10:48 net0


Code: Select all

lsmod | grep dvb
saa7134_dvb            36864  0
videobuf2_dvb          16384  1 saa7134_dvb
dvb_core              106496  1 videobuf2_dvb
saa7134               167936  2 saa7134_dvb,saa7134_alsa
videobuf2_dma_sg       16384  2 saa7134_dvb,saa7134
videobuf2_v4l2         28672  3 saa7134_dvb,saa7134,videobuf2_dvb
videobuf2_core         36864  3 saa7134,videobuf2_v4l2,videobuf2_dvb


Grazie tante per ogni aiuto, spero che tra voi ci sia qualcuno così bravo da aiutarmi a risolvere.

Ciao e buona giornata.

Pao1o
Level 1
Level 1
Posts: 10
Joined: Thu May 01, 2014 12:35 pm

Re: Problema Kaffeine non trova canali Mate 13, 17, 18

Postby Pao1o » Fri Oct 06, 2017 3:20 am

Help! Nessuno può aiutarmi?


Return to “Italiano (Italian)”