linux mint 18.1 no responde al abrir ventanas nuevas

Spanish Forum

Moderators: tomeu, JCSenar

Post Reply
da_us3r
Level 1
Level 1
Posts: 26
Joined: Tue Jun 06, 2017 9:50 am

linux mint 18.1 no responde al abrir ventanas nuevas

Post by da_us3r »

hola

hace nada estaba pasando archivos del movil al pc ( backup) , y al poco rato noto que las ventanas no responden..

de normal esto no me ha pasado muchas veces , al principio creía que eran virus ( estuve pasando el clamav) pero no detectó ninguna amenaza...

aqui pongo las características de mi pc :

inxi -Fxn

Code: Select all


System:    Host: Meh-PC Kernel: 4.4.0-78-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Xfce 4.12.3 (Gtk 2.24.28) Distro: Linux Mint 18.1 Serena
Machine:   Mobo: ASUSTeK model: B150 PRO GAMING/AURA v: Rev X.0x
           Bios: American Megatrends v: 0501 date: 01/26/2016
CPU:       Quad core Intel Core i5-6400 (-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21695
           clock speeds: max: 3300 MHz 1: 3298 MHz 2: 3251 MHz 3: 3258 MHz
           4: 3263 MHz
Graphics:  Card: NVIDIA GM206 [GeForce GTX 950] bus-ID: 01:00.0
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
           Resolution: 1280x1024@60.02hz
           GLX Renderer: GeForce GTX 950/PCIe/SSE2
           GLX Version: 4.5.0 NVIDIA 375.66 Direct Rendering: Yes
Audio:     Card-1 NVIDIA Device 0fba driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k4.4.0-78-generic
Network:   Card-1: Intel Ethernet Connection (2) I219-V
           driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
           IF: enp0s31f6 state: down 
           Card-2: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express)
           driver: ath9k bus-ID: 03:00.0
           IF: wlp3s0 state: up 
Drives:    HDD Total Size: 1000.2GB (11.9% used)
           ID-1: /dev/sda model: TOSHIBA_DT01ACA1 size: 1000.2GB
Partition: ID-1: / size: 901G used: 96G (12%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 17.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:41C
           Fan Speeds (in rpm): cpu: 0
Info:      Processes: 197 Uptime: 1:12 Memory: 2216.1/15968.6MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35 
que puedo hacer?


muchas gracias
Last edited by da_us3r on Sun Oct 28, 2018 12:39 pm, edited 1 time in total.

da_us3r
Level 1
Level 1
Posts: 26
Joined: Tue Jun 06, 2017 9:50 am

Re: linux mint 18.1 no responde al abrir ventanas nuevas

Post by da_us3r »

puse tmb el comando dmesg

Code: Select all

[    0.037462] Initializing cgroup subsys memory
[    0.037466] Initializing cgroup subsys devices
[    0.037468] Initializing cgroup subsys freezer
[    0.037470] Initializing cgroup subsys net_cls
[    0.037471] Initializing cgroup subsys perf_event
[    0.037473] Initializing cgroup subsys net_prio
[    0.037475] Initializing cgroup subsys hugetlb
[    0.037476] Initializing cgroup subsys pids
[    0.037497] CPU: Physical Processor ID: 0
[    0.037498] CPU: Processor Core ID: 0
[    0.038513] mce: CPU supports 10 MCE banks
[    0.038529] CPU0: Thermal monitoring enabled (TM1)
[    0.038538] process: using mwait in idle threads
[    0.038541] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.038542] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.038840] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[    0.043132] ftrace: allocating 32120 entries in 126 pages
[    0.054432] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.054434] smpboot: Max logical packages: 1
[    0.055632] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.058636] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.098325] TSC deadline timer enabled
[    0.098330] smpboot: CPU0: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.098344] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[    0.098369] ... version:                4
[    0.098370] ... bit width:              48
[    0.098370] ... generic registers:      8
[    0.098371] ... value mask:             0000ffffffffffff
[    0.098372] ... max period:             00007fffffffffff
[    0.098372] ... fixed-purpose events:   3
[    0.098373] ... event mask:             00000007000000ff
[    0.099012] x86: Booting SMP configuration:
[    0.099013] .... node  #0, CPUs:      #1
[    0.102458] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.102510]  #2 #3
[    0.109577] x86: Booted up 1 node, 4 CPUs
[    0.109580] smpboot: Total of 4 processors activated (21695.55 BogoMIPS)
[    0.112577] devtmpfs: initialized
[    0.115013] evm: security.selinux
[    0.115014] evm: security.SMACK64
[    0.115015] evm: security.SMACK64EXEC
[    0.115015] evm: security.SMACK64TRANSMUTE
[    0.115016] evm: security.SMACK64MMAP
[    0.115017] evm: security.ima
[    0.115018] evm: security.capability
[    0.115062] PM: Registering ACPI NVS region [mem 0xb6dcd000-0xb6dcdfff] (4096 bytes)
[    0.115063] PM: Registering ACPI NVS region [mem 0xbeb9c000-0xbf1d4fff] (6524928 bytes)
[    0.115176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.115184] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.115252] pinctrl core: initialized pinctrl subsystem
[    0.115407] RTC time: 15:07:53, date: 06/06/17
[    0.115499] NET: Registered protocol family 16
[    0.124430] cpuidle: using governor ladder
[    0.136421] cpuidle: using governor menu
[    0.136428] PCCT header not found.
[    0.136524] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.136526] ACPI: bus type PCI registered
[    0.136527] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.136589] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.136591] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.136597] PCI: Using configuration type 1 for base access
[    0.148734] ACPI: Added _OSI(Module Device)
[    0.148736] ACPI: Added _OSI(Processor Device)
[    0.148737] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148738] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154700] ACPI: Executed 24 blocks of module-level executable AML code
[    0.159977] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.162670] ACPI: Dynamic OEM Table Load:
[    0.162675] ACPI: SSDT 0xFFFF88042BF59800 0005FD (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.163452] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.164696] ACPI: Dynamic OEM Table Load:
[    0.164700] ACPI: SSDT 0xFFFF88042BA0B000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.165955] ACPI: Dynamic OEM Table Load:
[    0.165959] ACPI: SSDT 0xFFFF88042BF5A000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.166905] ACPI: Dynamic OEM Table Load:
[    0.166908] ACPI: SSDT 0xFFFF88042BA33000 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.169301] ACPI : EC: EC started
[    0.169313] ACPI: Interpreter enabled
[    0.169343] ACPI: (supports S0 S3 S4 S5)
[    0.169344] ACPI: Using IOAPIC for interrupt routing
[    0.169372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.171130] ACPI: Power Resource [PG00] (on)
[    0.171449] ACPI: Power Resource [PG01] (on)
[    0.171743] ACPI: Power Resource [PG02] (on)
[    0.173743] ACPI: Power Resource [WRST] (off)
[    0.174048] ACPI: Power Resource [WRST] (off)
[    0.174361] ACPI: Power Resource [WRST] (off)
[    0.174686] ACPI: Power Resource [WRST] (off)
[    0.175008] ACPI: Power Resource [WRST] (off)
[    0.175308] ACPI: Power Resource [WRST] (off)
[    0.175609] ACPI: Power Resource [WRST] (off)
[    0.175915] ACPI: Power Resource [WRST] (off)
[    0.176218] ACPI: Power Resource [WRST] (off)
[    0.176514] ACPI: Power Resource [WRST] (off)
[    0.176819] ACPI: Power Resource [WRST] (off)
[    0.177123] ACPI: Power Resource [WRST] (off)
[    0.177424] ACPI: Power Resource [WRST] (off)
[    0.177725] ACPI: Power Resource [WRST] (off)
[    0.178028] ACPI: Power Resource [WRST] (off)
[    0.178330] ACPI: Power Resource [WRST] (off)
[    0.178630] ACPI: Power Resource [WRST] (off)
[    0.178930] ACPI: Power Resource [WRST] (off)
[    0.179236] ACPI: Power Resource [WRST] (off)
[    0.179540] ACPI: Power Resource [WRST] (off)
[    0.185544] ACPI: Power Resource [FN00] (off)
[    0.185604] ACPI: Power Resource [FN01] (off)
[    0.185661] ACPI: Power Resource [FN02] (off)
[    0.185716] ACPI: Power Resource [FN03] (off)
[    0.185772] ACPI: Power Resource [FN04] (off)
[    0.186781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.186786] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.186812] \_SB_.PCI0:_OSC invalid UUID
[    0.186812] _OSC request data:1 1f 0 
[    0.186815] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.187341] PCI host bridge to bus 0000:00
[    0.187343] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.187345] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.187346] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.187347] pci_bus 0000:00: root bus resource [mem 0xc0800000-0xf7ffffff window]
[    0.187349] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.187350] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.187356] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.187612] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.187645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.187744] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.187854] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.187879] pci 0000:00:14.0: reg 0x10: [mem 0xf7330000-0xf733ffff 64bit]
[    0.187929] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.188013] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.188064] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.188094] pci 0000:00:16.0: reg 0x10: [mem 0xf734d000-0xf734dfff 64bit]
[    0.188147] pci 0000:00:16.0: PME# supported from D3hot
[    0.188268] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.188288] pci 0000:00:17.0: reg 0x10: [mem 0xf7348000-0xf7349fff]
[    0.188294] pci 0000:00:17.0: reg 0x14: [mem 0xf734c000-0xf734c0ff]
[    0.188301] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.188307] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.188313] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.188320] pci 0000:00:17.0: reg 0x24: [mem 0xf734b000-0xf734b7ff]
[    0.188347] pci 0000:00:17.0: PME# supported from D3hot
[    0.188459] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.188507] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.188601] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.188646] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    0.188696] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.188789] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.188819] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.188867] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.188956] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.188986] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[    0.189037] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.189131] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.189158] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[    0.189210] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[    0.189304] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.189346] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
[    0.189536] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.189549] pci 0000:00:1f.2: reg 0x10: [mem 0xf7344000-0xf7347fff]
[    0.189691] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.189723] pci 0000:00:1f.3: reg 0x10: [mem 0xf7340000-0xf7343fff 64bit]
[    0.189754] pci 0000:00:1f.3: reg 0x20: [mem 0xf7320000-0xf732ffff 64bit]
[    0.189788] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.189913] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.189947] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.190000] pci 0000:00:1f.4: reg 0x10: [mem 0xf734a000-0xf734a0ff 64bit]
[    0.190069] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.190237] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[    0.190272] pci 0000:00:1f.6: reg 0x10: [mem 0xf7300000-0xf731ffff]
[    0.190361] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.190444] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.190504] pci 0000:01:00.0: [10de:1402] type 00 class 0x030000
[    0.190523] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.190533] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.190542] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.190549] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.190555] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.190611] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.190642] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[    0.190660] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.196600] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.196602] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.196604] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.196607] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.196655] acpiphp: Slot [1] registered
[    0.196658] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.196716] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
[    0.196749] pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[    0.196831] pci 0000:03:00.0: supports D1
[    0.196833] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.196870] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.204587] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.204608] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.204656] acpiphp: Slot [1-1] registered
[    0.204659] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.204722] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400
[    0.204837] pci 0000:05:00.0: supports D1 D2
[    0.204838] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204866] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.212592] pci 0000:00:1d.2: PCI bridge to [bus 05-06]
[    0.212719] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.212799] pci 0000:07:00.0: [1b21:1242] type 00 class 0x0c0330
[    0.212833] pci 0000:07:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[    0.212926] pci 0000:07:00.0: PME# supported from D3hot D3cold
[    0.212963] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.220600] pci 0000:00:1d.3: PCI bridge to [bus 07]
[    0.220620] pci 0000:00:1d.3:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.222242] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.222283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.222324] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.222362] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.222402] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.222442] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.222481] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.222519] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.222855] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.222878] ACPI : EC: GPE = 0x23, I/O: command/status = 0x66, data = 0x62
[    0.222956] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.222957] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.222959] vgaarb: loaded
[    0.222959] vgaarb: bridge control possible 0000:01:00.0
[    0.223117] SCSI subsystem initialized
[    0.223144] libata version 3.00 loaded.
[    0.223165] ACPI: bus type USB registered
[    0.223177] usbcore: registered new interface driver usbfs
[    0.223184] usbcore: registered new interface driver hub
[    0.223196] usbcore: registered new device driver usb
[    0.223334] PCI: Using ACPI for IRQ routing
[    0.229563] PCI: pci_cache_line_size set to 64 bytes
[    0.229612] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.229614] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.229615] e820: reserve RAM buffer [mem 0xb51f7000-0xb7ffffff]
[    0.229616] e820: reserve RAM buffer [mem 0xb6dcd000-0xb7ffffff]
[    0.229617] e820: reserve RAM buffer [mem 0xb6e9e000-0xb7ffffff]
[    0.229618] e820: reserve RAM buffer [mem 0xbd2e0000-0xbfffffff]
[    0.229619] e820: reserve RAM buffer [mem 0xbeb9c000-0xbfffffff]
[    0.229620] e820: reserve RAM buffer [mem 0x43e800000-0x43fffffff]
[    0.229704] NetLabel: Initializing
[    0.229705] NetLabel:  domain hash size = 128
[    0.229706] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.229714] NetLabel:  unlabeled traffic allowed by default
[    0.229797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.229801] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.231835] amd_nb: Cannot enumerate AMD northbridges
[    0.231847] clocksource: Switched to clocksource hpet
[    0.236211] AppArmor: AppArmor Filesystem Enabled
[    0.236249] pnp: PnP ACPI init
[    0.236417] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.236420] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236712] pnp 00:01: [dma 0 disabled]
[    0.236747] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.236915] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.236917] system 00:02: [io  0xffff] has been reserved
[    0.236918] system 00:02: [io  0xffff] has been reserved
[    0.236919] system 00:02: [io  0xffff] has been reserved
[    0.236920] system 00:02: [io  0x1800-0x18fe] could not be reserved
[    0.236921] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.236923] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236992] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.236994] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237010] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.237040] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.237042] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.237212] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.237213] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.237215] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.237216] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.237217] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.237218] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.237220] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.237221] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.237222] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.237224] system 00:06: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[    0.237225] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237258] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.237259] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.237261] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.237262] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.237264] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.237266] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.237267] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.237268] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237490] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.237492] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.238327] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.238329] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.238330] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.238332] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.238977] pnp: PnP ACPI: found 10 devices
[    0.247080] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.247094] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.247096] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.247097] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.247107] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.247108] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.247110] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.247131] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.247132] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.247134] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.247135] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.247136] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.247138] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.247139] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.247140] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.247142] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.247143] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.247144] pci 0000:00:1d.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.247145] pci 0000:00:1d.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.247148] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
[    0.247152] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
[    0.247153] pci 0000:00:1d.0: BAR 14: assigned [mem 0xc0c00000-0xc0dfffff]
[    0.247156] pci 0000:00:1d.0: BAR 15: assigned [mem 0xc0e00000-0xc0ffffff 64bit pref]
[    0.247158] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.247159] pci 0000:00:1d.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.247162] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.247164] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.247166] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.247168] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.247171] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.247173] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.247175] pci 0000:00:1c.0:   bridge window [mem 0xc0800000-0xc09fffff]
[    0.247178] pci 0000:00:1c.0:   bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
[    0.247181] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.247184] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.247189] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.247191] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.247194] pci 0000:00:1d.0:   bridge window [mem 0xc0c00000-0xc0dfffff]
[    0.247196] pci 0000:00:1d.0:   bridge window [mem 0xc0e00000-0xc0ffffff 64bit pref]
[    0.247200] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.247214] pci 0000:00:1d.2: PCI bridge to [bus 05-06]
[    0.247221] pci 0000:00:1d.3: PCI bridge to [bus 07]
[    0.247224] pci 0000:00:1d.3:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.247230] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.247231] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.247233] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.247234] pci_bus 0000:00: resource 7 [mem 0xc0800000-0xf7ffffff window]
[    0.247235] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.247236] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.247237] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.247238] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.247239] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.247241] pci_bus 0000:02: resource 1 [mem 0xc0800000-0xc09fffff]
[    0.247242] pci_bus 0000:02: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
[    0.247243] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.247244] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.247245] pci_bus 0000:04: resource 1 [mem 0xc0c00000-0xc0dfffff]
[    0.247246] pci_bus 0000:04: resource 2 [mem 0xc0e00000-0xc0ffffff 64bit pref]
[    0.247247] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.247269] NET: Registered protocol family 2
[    0.247391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.247553] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.247689] TCP: Hash tables configured (established 131072 bind 65536)
[    0.247711] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.247754] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.247816] NET: Registered protocol family 1
[    0.248444] pci 0000:01:00.0: Video device with shadowed ROM
[    0.248581] PCI: CLS 0 bytes, default 64
[    0.248614] Unpacking initramfs...
[    0.762020] Freeing initrd memory: 39120K (ffff880033388000 - ffff8800359bc000)
[    0.762064] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.762066] software IO TLB [mem 0xb11f7000-0xb51f7000] (64MB) mapped at [ffff8800b11f7000-ffff8800b51f6fff]
[    0.762213] Scanning for low memory corruption every 60 seconds
[    0.762518] audit: initializing netlink subsys (disabled)
[    0.762532] audit: type=2000 audit(1496761673.768:1): initialized
[    0.762827] Initialise system trusted keyring
[    0.762961] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.762963] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.764117] zbud: loaded
[    0.764298] VFS: Disk quotas dquot_6.6.0
[    0.764326] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.764523] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.764737] fuse init (API version 7.23)
[    0.764849] Key type big_key registered
[    0.764860] Allocating IMA MOK and blacklist keyrings.
[    0.765753] Key type asymmetric registered
[    0.765756] Asymmetric key parser 'x509' registered
[    0.765781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.765846] io scheduler noop registered
[    0.765850] io scheduler deadline registered (default)
[    0.765877] io scheduler cfq registered
[    0.766439] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.766445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.766474] efifb: probing for efifb
[    0.766483] efifb: framebuffer at 0xf1000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
[    0.766484] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.766485] efifb: scrolling: redraw
[    0.766486] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.766553] Console: switching to colour frame buffer device 128x48
[    0.766562] fb0: EFI VGA frame buffer device
[    0.766569] intel_idle: MWAIT substates: 0x142120
[    0.766570] intel_idle: v0.4.1 model 0x5E
[    0.766571] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.766780] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.766783] ACPI: Sleep Button [SLPB]
[    0.766807] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.766809] ACPI: Power Button [PWRB]
[    0.766833] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.766834] ACPI: Power Button [PWRF]
[    0.767472] thermal LNXTHERM:00: registered as thermal_zone0
[    0.767473] ACPI: Thermal Zone [TZ00] (28 C)
[    0.767572] thermal LNXTHERM:01: registered as thermal_zone1
[    0.767573] ACPI: Thermal Zone [TZ01] (30 C)
[    0.767604] GHES: HEST is not enabled!
[    0.767702] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.788319] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.790574] Linux agpgart interface v0.103
[    0.792628] loop: module loaded
[    0.792765] libphy: Fixed MDIO Bus: probed
[    0.792768] tun: Universal TUN/TAP device driver, 1.6
[    0.792769] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.792822] PPP generic driver version 2.4.2
[    0.792890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.792894] ehci-pci: EHCI PCI platform driver
[    0.792901] ehci-platform: EHCI generic platform driver
[    0.792909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.792911] ohci-pci: OHCI PCI platform driver
[    0.792919] ohci-platform: OHCI generic platform driver
[    0.792925] uhci_hcd: USB Universal Host Controller Interface driver
[    0.793023] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.793028] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.794107] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.794111] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.794172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.794173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.794175] usb usb1: Product: xHCI Host Controller
[    0.794176] usb usb1: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    0.794177] usb usb1: SerialNumber: 0000:00:14.0
[    0.794275] hub 1-0:1.0: USB hub found
[    0.794287] hub 1-0:1.0: 12 ports detected
[    0.801193] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.801195] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.801215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.801216] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.801218] usb usb2: Product: xHCI Host Controller
[    0.801219] usb usb2: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    0.801220] usb usb2: SerialNumber: 0000:00:14.0
[    0.801332] hub 2-0:1.0: USB hub found
[    0.801340] hub 2-0:1.0: 6 ports detected
[    0.804902] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    0.804906] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    0.863698] xhci_hcd 0000:07:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[    0.863792] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.863794] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.863795] usb usb3: Product: xHCI Host Controller
[    0.863796] usb usb3: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    0.863797] usb usb3: SerialNumber: 0000:07:00.0
[    0.863994] hub 3-0:1.0: USB hub found
[    0.864000] hub 3-0:1.0: 2 ports detected
[    0.864059] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    0.864062] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[    0.864084] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.864094] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.864096] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864097] usb usb4: Product: xHCI Host Controller
[    0.864098] usb usb4: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    0.864099] usb usb4: SerialNumber: 0000:07:00.0
[    0.864255] hub 4-0:1.0: USB hub found
[    0.864261] hub 4-0:1.0: 2 ports detected
[    0.864343] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.867494] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.867498] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.867686] mousedev: PS/2 mouse device common for all mice
[    0.868034] rtc_cmos 00:04: RTC can wake from S4
[    0.868471] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.868554] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.868561] i2c /dev entries driver
[    0.868600] device-mapper: uevent: version 1.0.3
[    0.868717] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.868734] Intel P-state driver initializing.
[    0.869626] intel_pstate: HWP enabled
[    0.869630] ledtrig-cpu: registered to indicate activity on CPUs
[    0.869632] EFI Variables Facility v0.08 2004-May-17
[    0.875068] NET: Registered protocol family 10
[    0.875356] NET: Registered protocol family 17
[    0.875367] Key type dns_resolver registered
[    0.875572] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x74
[    0.875584] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x74
[    0.875624] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x74
[    0.875657] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x74
[    0.875700] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.876072] registered taskstats version 1
[    0.876083] Loading compiled-in X.509 certificates
[    0.876578] Loaded X.509 cert 'Build time autogenerated kernel key: 779fd75203f0d36b99b83c7328fac831ec7adf9e'
[    0.876592] zswap: loaded using pool lzo/zbud
[    0.878406] Key type trusted registered
[    0.882524] Key type encrypted registered
[    0.882542] AppArmor: AppArmor sha1 policy hashing enabled
[    0.882544] ima: No TPM chip found, activating TPM-bypass!
[    0.882557] evm: HMAC attrs: 0x1
[    0.883519]   Magic number: 5:106:133
[    0.883550] acpi PNP0C02:05: hash matches
[    0.883559] acpi device:08: hash matches
[    0.883800] rtc_cmos 00:04: setting system clock to 2017-06-06 15:07:54 UTC (1496761674)
[    0.884075] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.884076] EDD information not available.
[    0.884143] PM: Hibernation image not present or could not be loaded.
[    0.885045] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[    0.885046] Write protecting the kernel read-only data: 14336k
[    0.885711] Freeing unused kernel memory: 1760K (ffff880002848000 - ffff880002a00000)
[    0.886042] Freeing unused kernel memory: 112K (ffff880002de4000 - ffff880002e00000)
[    0.896225] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896274] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896282] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896291] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896588] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896616] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896759] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896790] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896818] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.896846] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.914828] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.919046] hidraw: raw HID events driver (C) Jiri Kosina
[    0.945169] ahci 0000:00:17.0: version 3.0
[    0.945406] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.945408] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.948264] pps_core: LinuxPPS API ver. 1 registered
[    0.948266] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.949260] PTP clock support registered
[    0.952017] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.952018] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.992675] scsi host0: ahci
[    0.993000] scsi host1: ahci
[    0.993304] scsi host2: ahci
[    0.993641] scsi host3: ahci
[    0.993890] scsi host4: ahci
[    0.994296] scsi host5: ahci
[    0.994373] ata1: SATA max UDMA/133 abar m2048@0xf734b000 port 0xf734b100 irq 127
[    0.994378] ata2: SATA max UDMA/133 abar m2048@0xf734b000 port 0xf734b180 irq 127
[    0.994382] ata3: SATA max UDMA/133 abar m2048@0xf734b000 port 0xf734b200 irq 127
[    0.994387] ata4: SATA max UDMA/133 abar m2048@0xf734b000 port 0xf734b280 irq 127
[    0.994391] ata5: SATA max UDMA/133 abar m2048@0xf734b000 port 0xf734b300 irq 127
[    0.994405] ata6: SATA max UDMA/133 abar m2048@0xf734b000 port 0xf734b380 irq 127
[    0.994832] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.111976] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[    1.245706] usb 1-5: New USB device found, idVendor=046d, idProduct=c31c
[    1.245708] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.245709] usb 1-5: Product: USB Keyboard
[    1.245710] usb 1-5: Manufacturer: Logitech
[    1.245897] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.245899] usb 1-5: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[    1.257952] usbcore: registered new interface driver usbhid
[    1.257968] usbhid: USB HID core driver
[    1.259245] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C31C.0001/input/input6
[    1.290495] e1000e 0000:00:1f.6 eth0: registered PHC clock
[    1.290497] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 34:97:f6:91:a1:b7
[    1.290498] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.290603] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    1.291243] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    1.308151] ata3: SATA link down (SStatus 4 SControl 300)
[    1.312089] ata5: SATA link down (SStatus 4 SControl 300)
[    1.312441] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-5/input0
[    1.313729] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C31C.0002/input/input7
[    1.316091] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.316112] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.316146] ata1: SATA link down (SStatus 4 SControl 300)
[    1.317102] ata2.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[    1.317104] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.318215] ata2.00: configured for UDMA/133
[    1.319213] ata6.00: ATAPI: ATAPI   iHAS124   E, 4L0A, max UDMA/100
[    1.320026] ata4: SATA link down (SStatus 4 SControl 300)
[    1.320093] ata6.00: configured for UDMA/100
[    1.328519] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[    1.328999] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.329003] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.329005] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.329509] sd 1:0:0:0: [sda] Write Protect is off
[    1.329511] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.329671] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.330392] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L0A PQ: 0 ANSI: 5
[    1.350573] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.350575] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.350879] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.350984] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    1.368455] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-5/input1
[    1.374668]  sda: sda1 sda2 sda3
[    1.375638] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.420047] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    1.551147] usb 1-11: New USB device found, idVendor=046d, idProduct=c534
[    1.551150] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.551151] usb 1-11: Product: USB Receiver
[    1.551152] usb 1-11: Manufacturer: Logitech
[    1.553212] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:046D:C534.0003/input/input8
[    1.608319] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[    1.610391] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0004/input/input9
[    1.664619] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[    1.760001] tsc: Refined TSC clocksource calibration: 2712.000 MHz
[    1.760003] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    2.760372] clocksource: Switched to clocksource tsc
[    3.219952] raid6: sse2x1   gen()  9926 MB/s
[    3.287950] raid6: sse2x1   xor()  6062 MB/s
[    3.355953] raid6: sse2x2   gen() 11841 MB/s
[    3.423950] raid6: sse2x2   xor()  8053 MB/s
[    3.491952] raid6: sse2x4   gen() 13002 MB/s
[    3.559956] raid6: sse2x4   xor()  9348 MB/s
[    3.627957] raid6: avx2x1   gen() 23506 MB/s
[    3.695954] raid6: avx2x2   gen() 27084 MB/s
[    3.763958] raid6: avx2x4   gen() 28045 MB/s
[    3.763959] raid6: using algorithm avx2x4 gen() 28045 MB/s
[    3.763960] raid6: using avx2x2 recovery algorithm
[    3.764764] xor: automatically using best checksumming function:
[    3.803957]    avx       : 28071.000 MB/sec
[    3.812573] Btrfs loaded
[    4.268119] random: nonblocking pool is initialized
[    4.289826] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.416565] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.416649] systemd[1]: Detected architecture x86-64.
[    5.433690] systemd[1]: Set hostname to <Meh-PC>.
[    6.845671] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.845701] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.845727] systemd[1]: Listening on Journal Socket.
[    6.845746] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.845759] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.845776] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    6.845791] systemd[1]: Listening on udev Control Socket.
[    6.845796] systemd[1]: Reached target User and Group Name Lookups.
[    6.845801] systemd[1]: Reached target Encrypted Volumes.
[    6.845810] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.845820] systemd[1]: Listening on Syslog Socket.
[    6.845833] systemd[1]: Listening on udev Kernel Socket.
[    6.845881] systemd[1]: Created slice System Slice.
[    6.856217] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.856463] systemd[1]: Mounting Huge Pages File System...
[    6.856694] systemd[1]: Starting Set console keymap...
[    6.856756] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.908193] systemd[1]: Starting Load Kernel Modules...
[    6.908226] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.908498] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.908743] systemd[1]: Started Braille Device Support.
[    6.908901] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.909136] systemd[1]: Starting Uncomplicated firewall...
[    6.909175] systemd[1]: Listening on Journal Audit Socket.
[    6.909410] systemd[1]: Starting Journal Service...
[    6.909631] systemd[1]: Mounting Debug File System...
[    6.909899] systemd[1]: Mounting POSIX Message Queue File System...
[    6.986269] systemd[1]: Created slice User and Session Slice.
[    6.986281] systemd[1]: Reached target Slices.
[    7.000109] systemd[1]: Started Read required files in advance.
[    7.000192] systemd[1]: Reached target Remote File Systems (Pre).
[    7.000201] systemd[1]: Reached target Remote File Systems.
[    7.000250] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.001015] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.018504] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.251278] systemd[1]: Started Uncomplicated firewall.
[    7.436603] systemd[1]: Mounted Huge Pages File System.
[    7.436645] systemd[1]: Mounted Debug File System.
[    7.436666] systemd[1]: Mounted POSIX Message Queue File System.
[    7.520143] systemd[1]: Started LVM2 metadata daemon.
[    7.561124] systemd[1]: Started Journal Service.
[    7.739538] lp: driver loaded but no devices found
[    7.775144] ppdev: user-space parallel port driver
[    9.534584] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.735158] systemd-journald[329]: Received request to flush runtime journal from PID 1
[   10.075905] wmi: Mapper loaded
[   10.088345] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.317270] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   10.460783] Bluetooth: Core ver 2.21
[   10.460792] NET: Registered protocol family 31
[   10.460793] Bluetooth: HCI device and connection manager initialized
[   10.460795] Bluetooth: HCI socket layer initialized
[   10.460796] Bluetooth: L2CAP socket layer initialized
[   10.460799] Bluetooth: SCO socket layer initialized
[   10.677939] Bluetooth: HCI UART driver ver 2.3
[   10.677941] Bluetooth: HCI UART protocol H4 registered
[   10.677942] Bluetooth: HCI UART protocol BCSP registered
[   10.677943] Bluetooth: HCI UART protocol LL registered
[   10.677943] Bluetooth: HCI UART protocol ATH3K registered
[   10.677944] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.677960] Bluetooth: HCI UART protocol Intel registered
[   10.677967] Bluetooth: HCI UART protocol BCM registered
[   10.677968] Bluetooth: HCI UART protocol QCA registered
[   11.051210] AVX2 version of gcm_enc/dec engaged.
[   11.051212] AES CTR mode by8 optimization enabled
[   11.059512] [drm] Initialized drm 1.1.0 20060810
[   11.384845] asus_wmi: ASUS WMI generic driver loaded
[   11.471402] asus_wmi: Initialization: 0x0
[   11.471416] asus_wmi: BIOS WMI version: 0.9
[   11.471458] asus_wmi: SFUN value: 0x0
[   11.471632] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[   11.471703] asus_wmi: Number of fans: 1
[   11.602108] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
[   11.624800] snd_hda_intel 0000:01:00.1: Disabling MSI
[   11.624804] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   11.690278] ath: EEPROM regdomain: 0x809c
[   11.690280] ath: EEPROM indicates we should expect a country code
[   11.690281] ath: doing EEPROM country->regdmn map search
[   11.690282] ath: country maps to regdmn code: 0x52
[   11.690282] ath: Country alpha2 being used: CN
[   11.690283] ath: Regpair used: 0x52
[   11.709941] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.710132] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001be0000, irq=18
[   11.734548] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   11.984490] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
[   12.068783] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[   12.069247] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   12.069248] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.069250] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.069250] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.069251] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   12.069252] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.069253] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   12.069255] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   12.069256] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.080890] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   12.080936] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   12.080975] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   12.081024] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   12.081079] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   12.081112] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   12.081144] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   12.140745] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   12.140789] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   12.140843] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   12.140889] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   12.406914] intel_rapl: Found RAPL domain package
[   12.406916] intel_rapl: Found RAPL domain core
[   12.406931] intel_rapl: Found RAPL domain dram
[   12.613497] cfg80211: World regulatory domain updated:
[   12.613499] cfg80211:  DFS Master region: unset
[   12.613500] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.613501] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.613503] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.613503] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.613505] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.613506] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.613507] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.613508] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.613509] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   12.616398] cfg80211: Regulatory domain changed to country: CN
[   12.616400] cfg80211:  DFS Master region: FCC
[   12.616401] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.616402] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.616403] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[   12.616404] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   12.616405] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   12.616406] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   12.616407] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[   12.616408] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   14.956226] nvidia: module license 'NVIDIA' taints kernel.
[   14.956228] Disabling lock debugging due to kernel taint
[   14.959204] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   14.963544] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.963597] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[   14.963606] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
[   15.222604] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.66  Mon May  1 14:33:30 PDT 2017
[   15.234978] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   15.551709] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241
[   16.229617] Adding 16695292k swap on /dev/sda3.  Priority:-1 extents:1 across:16695292k FS
[   16.627095] NVRM: Your system is not currently configured to drive a VGA console
[   16.627097] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   16.627099] NVRM: requires the use of a text-mode VGA console. Use of other console
[   16.627099] NVRM: drivers including, but not limited to, vesafb, may result in
[   16.627100] NVRM: corruption and stability problems, and is not supported.
[   16.632806] cgroup: new mount options do not match the existing superblock, will be ignored
[   17.783850] vboxdrv: Found 4 processor cores
[   17.800578] vboxdrv: TSC mode is Invariant, tentative frequency 2711999995 Hz
[   17.800579] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[   18.042234] VBoxNetFlt: Successfully started.
[   18.071188] VBoxNetAdp: Successfully started.
[   18.073459] VBoxPciLinuxInit
[   18.104941] vboxpci: IOMMU not found (not registered)
[   27.332983] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   27.350004] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   27.353159] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[   27.560608] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[   27.992779] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   29.056767] nvidia-modeset: Allocated GPU:0 (GPU-850d6107-3d1d-1b8a-1a99-ac3ff920a59d) @ PCI:0000:01:00.0
[   40.161428] wlp3s0: authenticate with dc:53:7c:de:fc:fa
[   40.185315] wlp3s0: send auth to dc:53:7c:de:fc:fa (try 1/3)
[   40.188269] wlp3s0: authenticated
[   40.188795] wlp3s0: associate with dc:53:7c:de:fc:fa (try 1/3)
[   40.192929] wlp3s0: RX AssocResp from dc:53:7c:de:fc:fa (capab=0x1411 status=0 aid=1)
[   40.193033] wlp3s0: associated
[   40.193039] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   47.566544] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   47.566547] Bluetooth: BNEP filters: protocol multicast
[   47.566551] Bluetooth: BNEP socket layer initialized
[   53.837371] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[   53.966876] usb 1-1: New USB device found, idVendor=12d1, idProduct=107e
[   53.966878] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   53.966879] usb 1-1: Product: EVA-L09
[   53.966880] usb 1-1: Manufacturer: HUAWEI
[   53.966881] usb 1-1: SerialNumber: MWS0216B25006219
[   54.113179] usb-storage 1-1:1.1: USB Mass Storage device detected
[   54.113225] scsi host6: usb-storage 1-1:1.1
[   54.113322] usbcore: registered new interface driver usb-storage
[   54.149179] usbcore: registered new interface driver uas
[   55.114816] scsi 6:0:0:0: CD-ROM            Linux    File-CD Gadget   0310 PQ: 0 ANSI: 2
[   55.115760] sr 6:0:0:0: [sr1] scsi-1 drive
[   55.115946] sr 6:0:0:0: Attached scsi CD-ROM sr1
[   55.116077] sr 6:0:0:0: Attached scsi generic sg2 type 5
[   58.874980] usb 1-1: USB disconnect, device number 4
[   59.237515] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[   59.366399] usb 1-1: New USB device found, idVendor=12d1, idProduct=107e
[   59.366401] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   59.366402] usb 1-1: Product: EVA-L09
[   59.366403] usb 1-1: Manufacturer: HUAWEI
[   59.366403] usb 1-1: SerialNumber: MWS0216B25006219
[   59.367294] usb-storage 1-1:1.1: USB Mass Storage device detected
[   59.367642] scsi host7: usb-storage 1-1:1.1
[   60.366773] scsi 7:0:0:0: CD-ROM            Linux    File-CD Gadget   0310 PQ: 0 ANSI: 2
[   60.368180] sr 7:0:0:0: [sr1] scsi-1 drive
[   60.368290] sr 7:0:0:0: Attached scsi CD-ROM sr1
[   60.368351] sr 7:0:0:0: Attached scsi generic sg2 type 5
[   65.500949] ISO 9660 Extensions: Microsoft Joliet Level 3
[   65.524808] ISOFS: changing to secondary root
[  224.158392] usb 1-1: USB disconnect, device number 5
[  224.677688] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[  224.862559] usb 1-1: New USB device found, idVendor=12d1, idProduct=107e
[  224.862567] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  224.862571] usb 1-1: Product: EVA-L09
[  224.862575] usb 1-1: Manufacturer: HUAWEI
[  224.862578] usb 1-1: SerialNumber: MWS0216B25006219
[  224.863678] usb-storage 1-1:1.1: USB Mass Storage device detected
[  224.863826] scsi host8: usb-storage 1-1:1.1
[  225.862284] scsi 8:0:0:0: CD-ROM            Linux    File-CD Gadget   0310 PQ: 0 ANSI: 2
[  225.864041] sr 8:0:0:0: [sr1] scsi-1 drive
[  225.864268] sr 8:0:0:0: Attached scsi CD-ROM sr1
[  225.864309] sr 8:0:0:0: Attached scsi generic sg2 type 5
[  231.447323] ISO 9660 Extensions: Microsoft Joliet Level 3
[  231.447663] ISOFS: changing to secondary root
[  242.583645] usb 1-1: USB disconnect, device number 6

User avatar
hatteras
Level 9
Level 9
Posts: 2995
Joined: Fri Sep 24, 2010 6:43 pm
Location: En el paraiso en la tierra
Contact:

Re: linux mint 18.1 no responde al abrir ventanas nuevas

Post by hatteras »

Todos somos muy ignorantes. Pero no todos ignoramos las mismas cosas.
Es un placer ayudar, y ver que a alguien le es útil.
Es un placer pedir ayuda y ver que alguien te la da desinteresadamente.

User avatar
linux0
Level 2
Level 2
Posts: 70
Joined: Tue Mar 28, 2017 3:23 pm

Re: linux mint 18.1 no responde al abrir ventanas nuevas

Post by linux0 »

Hola buenas que controladores (drivers) estas usando? usas el xserver-xorg-video-nouveau o algun de nvidia??? Si no sabes, fijate en esto podes ir a Configuraciones del Sistema > Administración> Administrador de Controladores ( te va a pedir clave ).

Si estas usando xserver-xorg-video-nouveau cambialo por uno de nvidia y conta como te fue

Yo tuve una mala experiencia con esto, el pc se me congelaba despues de 5-15 min de uso, sin arreglo alguno más que reiniciar con los botones del PC y era por que usaba el driver por default xserver-xorg-video-nouveau, esto me pasaba con una placa GTX 550 ti, pero por alguna razon si usaba el pc sin placa el driver xorg funcionaba bien jaja. Salu2 :D
Image

da_us3r
Level 1
Level 1
Posts: 26
Joined: Tue Jun 06, 2017 9:50 am

Re: linux mint 18.1 no responde al abrir ventanas nuevas

Post by da_us3r »

linux0 wrote:Hola buenas que controladores (drivers) estas usando? usas el xserver-xorg-video-nouveau o algun de nvidia??? Si no sabes, fijate en esto podes ir a Configuraciones del Sistema > Administración> Administrador de Controladores ( te va a pedir clave ).

Si estas usando xserver-xorg-video-nouveau cambialo por uno de nvidia y conta como te fue

Yo tuve una mala experiencia con esto, el pc se me congelaba despues de 5-15 min de uso, sin arreglo alguno más que reiniciar con los botones del PC y era por que usaba el driver por default xserver-xorg-video-nouveau, esto me pasaba con una placa GTX 550 ti, pero por alguna razon si usaba el pc sin placa el driver xorg funcionaba bien jaja. Salu2 :D

hola, gracias por tu respuesta

pues resulta que si que he estado usando los drivers de nvidia e intel ( los de xserver-xorg-video-nouveau me daban problemas)

al final cambié el tipo de configuración de escritorio a metacity + composición

y parece que por ahora va bien..

por cierto uso el escritorio xfce ( este suele dar problemas ? , es mejor mate ?)

saludos

da_us3r
Level 1
Level 1
Posts: 26
Joined: Tue Jun 06, 2017 9:50 am

Re: linux mint 18.1 no responde al abrir ventanas nuevas

Post by da_us3r »

hatteras wrote:Tu problema parece el mismo que en
viewtopic.php?f=68&t=245693
o en viewtopic.php?f=68&t=245693&p=1316559&h ... r#p1316533
o en viewtopic.php?f=68&t=174483&p=960436&hi ... er#p960436
cuando copias archivos de gran tamaño.

Mi sugerencia es usar Ultracopier http://hatteras-blog.blogspot.com.es/20 ... -nemo.html

gracias por la sugerencia , lo tendré en cuenta ^^

User avatar
JOPETA
Level 16
Level 16
Posts: 6780
Joined: Thu Nov 20, 2014 6:10 am
Location: En un lugar de cuyo nombre no quiero acordarme

Re: linux mint 18.1 no responde al abrir ventanas nuevas

Post by JOPETA »

da_us3r wrote: al final cambié el tipo de configuración de escritorio a metacity + composición

y parece que por ahora va bien..

por cierto uso el escritorio xfce ( este suele dar problemas ? , es mejor mate ?)

saludos
Xfce es el escritorio menos exigente y tienes hardware de sobra para cualquier escritorio que desees. Solo debes probarlos y elegir el que mas te guste o se adapte a tí (Mate, Cinnamon, KDE o xfce)

Lo único que pudiera darte "problemas puntuales" es que tu equipo es bastante nuevo (no llega a dos años) por lo que debería mejorar con los kernels mas recientes de cada serie. Prueba a ver que tal van los de la serie 4.10, pero instalalos de forma gráfica incluso los de la serie 4.4 (nunca las actualizaciones de nivel 5). :wink:

Post Reply

Return to “Español (Spanish)”