Realtek RTL8723BE. Red inalambrica se cierra al alejarse del modem/ruter [SOLUCIONADO]

[Dickfree]

Instalé Sylvia en este equipo:

Code: Select all

Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: 4000 bus-ID: 02:00.0 chip-ID: 10ec:8168
           IF: eno1 state: down mac: <filter>
           Card-2: Realtek RTL8723BE PCIe Wireless Network Adapter
           driver: rtl8723be port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:b723
IF: wlo1 state: up mac: <filter>
System:    Host: lely-HP-Laptop-14-bs0xx Kernel: 4.10.0-42-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3) dm: lightdm Distro: Linux Mint 18.3 Sylvia
Machine:   System: HP (portable) product: HP Laptop 14-bs0xx v: Type1ProductConfigId Chassis: type: 10
           Mobo: HP model: 831E v: 17.36 Bios: Insyde v: F.21 date: 07/24/201
CPU:       Dual core Intel Core i5-7200U (-HT-MCP-) cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10848
clock speed: min/max: 400/3100 MHz 1: 691 MHz 2: 697 MHz 3: 699 MHz 4: 699 MHzHH

Cuando la notebook se aleja del modem o el router la conexion se cierra porque disminuye la intensidad de la señal.
la configuracion de las preferencias son Automatico (DHCP)
Uso este sistema operativo en mi PC de escritorio sin ninguna dificultad.
Este mismo equipo tiene Windows 10 y no tiene problemas con la conexión.
Hay alguna solución o debo cambiar de distro?

[JOPETA]

Hola Dickfree. Bienvend@ al foro.

Deberías esperar la participación de los que si entienden de estas cosas que posiblemente necesiten mas información , como el contenido del archivo de texto (whireless-info) que se genera en tu directorio de usuario al introducir el siguiente código en una terminal (Ctrl+Alt+T).

• • Code: Select all

    wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info && chmod +x wireless-info && ./wireless-info

Asegúrate de estar conectado a la red por otros medios (cable) cuando lo hagas, edita el archivo y copia su contenido aquí usando la opción Code como se indica en este post.

Parece ser que las tarjetitas estas vienen con dos antenas mientras que los laptops de HP solo tienen una (y mal posicionada) . Por lo que puedo entender se trata de un problema con los controladores que está pendiente de solución, pero en tu caso, con el kernel 4.10 podrías tratar de cambiar la antena a ver que pasa (no es infrecuente que el bluetooth deje de funcionar al cambiar de antena).

Puedes probar

• 1)Editando el contenido de /etc/modprobe.d/rtl8723be.conf (si no existe créalo) con

  • Code: Select all

    gksudo xed /etc/modprobe.d/rtl8723be.conf

    comprueba los siguiente parámetros

    Code: Select all

    options rtl8723be fwlps=0
    options rtl8723be ant_sel=2

  si no existen añáde las dos lineas (copia y pega) y guarda el archivo.
  
  2)Prueba la nueva configuración reiniciando y/o asegurate que se recarga el módulo con

  • Code: Select all

    modprobe -r rtl8723be
    modprobe -v rtl8723be

Puedes ver la intensidad de la señal con dicha seleccion de antena, si es menor que la que tenías cambia la antena (volviendo al punto 1) con options rtl8723be ant_sel=1 y recargando el módulo (2). Suerte.

Editado: código incompleto subsanado,

[Dickfree]

Code: Select all

#!/bin/bash
#
# Copyright (c) 2012
#
# Authors: Wild Man, Krytarik
# Helpers: chili555
#
# This script gathers the infos necessary for troubleshooting a wireless
# connection and saves them in a text file, wrapping it in an archive if it
# exceeds the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
#
##############################################################################
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

SCRIPTDATE="2017-12-05 04:13 +0100"
FILEBASE="wireless-info"
OUTPUTDIR="$PWD"
OUTPUTDIRFB="/tmp"

MODMATCHES="(air|ar5|at7|ath[^3]?|b43|bcma|brcm|carl|ipw|iwl|ndis|r(818|8192[eu]|871|92su)|8(188|189|192|723|812)[acde][esu]|rt[23567]|rtl|ssb|wl|(cfg|mac)80211)"
LSMODMATCHES="(wmi|(dell|ideapad)[-_]laptop)"
IFACEMATCHES="(wlan[0-9]|eth[0-9])"
DMESGMATCHES="(firmware|[nN]etwork)"
NMPROFMATCHES="\(\[connection\]\|id=\|type=\|permissions=\|autoconnect=\|\[802-11-wireless\]\|\[wifi\]\|ssid=\|bssid=\|mac-address\(-blacklist\)\?=\|mtu=\|\[802-1x\]\|[[:graph:]]*ca-certs\?=\|\[ipv[46]\]\|method=\)"

DMESGEXCL="apparmor|(cfg|mac)80211"
MODINFOEXCL="alias"
MODPROBEXCL="(alsa-base|blacklist-(firewire|framebuffer|modem|oss|watchdog)|fglrx|nvidia|fbdev|bumblebee)"
PMUTILSEXCL="/etc/pm/(power.d/(95hdparm-apm|intel-audio-powersave|sata_alpm)|sleep.d/(10_grub-common|10_unattended-upgrades.*|novatel_3g.*))"

NETMGRNAMES=("NetworkManager" "Wicd" "ConnMan")
NETMGRPATHS=("/usr/sbin/NetworkManager" "/usr/sbin/wicd" "/usr/sbin/connmand")
DEC2BI=({0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1})
DEC2HEX=($(printf "%02x " {0..255}))

export LANG="en_US.UTF-8"
export LANGUAGE="en_US:en"
export LC_ALL="en_US.UTF-8"

if [ -t 0 ]; then
    DIALOGAPP="terminal"
    DIALOGBREAK=" "
    TERMOUT="yes"
elif [ -x /usr/bin/zenity ]; then
    DIALOGAPP="zenity"
    DIALOGBREAK="\n"
elif [ -x /usr/bin/kdialog ]; then
    DIALOGAPP="kdialog"
    DIALOGBREAK="\n"
else
    exit 1
fi

if [ -t 0 ]; then
    SUDO="sudo"
elif [ -x /usr/bin/pkexec ]; then
    SUDO="pkexec"
elif [ -x /usr/bin/gksudo ]; then
    SUDO="gksudo"
    GKSUDO="yes"
elif [ -x /usr/bin/kdesudo ]; then
    SUDO="kdesudo"
    KDESUDO="yes"
    KDESUDOCMT=" needs administrative privileges. Please enter your password."
fi

dialog_info () {
    case $DIALOGAPP in
	terminal)
	    printf "%b\n" "$1"
	    ;;
	zenity)
	    zenity --info --text="$1"
	    ;;
	kdialog)
	    kdialog --msgbox "$1"
	    ;;
    esac
}

dialog_error () {
    case $DIALOGAPP in
	terminal)
	    printf "%b\n" "$1" >&2
	    ;;
	zenity)
	    zenity --error --text="$1"
	    ;;
	kdialog)
	    kdialog --error "$1"
	    ;;
    esac
}

dialog_question () {
    case $DIALOGAPP in
	terminal)
	    local INPUT
	    read -r -p "$1 [Y/n]: " INPUT
	    echo "${INPUT,,}"
	    ;;
	zenity)
	    zenity --question --text="$1" || echo "no"
	    ;;
	kdialog)
	    kdialog --yesno "$1" || echo "no"
	    ;;
    esac
}

ip6-mac () {
    for MAC in "$@"; do
	OCT1BI=${DEC2BI[0x${MAC:0:2}]}
	OCT1BI7=$((${OCT1BI:6:1} - 1))
	OCT1BIM="${OCT1BI:0:6}${OCT1BI7#-}${OCT1BI:7}"
	IP6S+=${IP6S:+$'\n'}"${DEC2HEX[2#$OCT1BIM]}${MAC:3:2}:${MAC:6:2}ff:fe${MAC:9:2}:${MAC:12:2}${MAC:15:2}"
    done
    sed 's/\(^\|:\)0\+\([[:alnum:]]\)/\1\2/g;s/^\([0:]\+\)/\\(::\\|\1\\)/' <<< "$IP6S"
}

exec 3>&1 4>&2
exec 1> "$OUTPUTDIR/$FILEBASE.txt" || {
    dialog_error "${TERMOUT+\n}Cannot write output file in \"$OUTPUTDIR\",${DIALOGBREAK}trying in \"$OUTPUTDIRFB\" instead.${TERMOUT+\n}"
    OUTPUTDIR="$OUTPUTDIRFB"
    exec 1> "$OUTPUTDIR/$FILEBASE.txt" || {
	dialog_error "${TERMOUT+\n}Cannot write output file in \"$OUTPUTDIR\" either, aborting.${TERMOUT+\n}"
	exit 1
    }
}
exec 2>&1

printf "\n########## wireless info START ##########\n\n"
REPORTDATE=$(date +"%d %b %Y %H:%M %Z %z")
SCRIPTDATE=$(date -u -d "$SCRIPTDATE" +"%d %b %Y %H:%M %Z %z")
LASTBOOTDT=$(last -FRn 1 reboot | sed -n 's/.*system boot[ ]\+\(.\+\) - .*/\1/p')
LASTBOOTDT=$(date -d "$LASTBOOTDT" +"%d %b %Y %H:%M %Z %z")
printf "Report from: %s\n\n" "$REPORTDATE"
printf "Booted last: %s\n\n" "$LASTBOOTDT"
printf "Script from: %s\n" "$SCRIPTDATE"

printf "\n##### release ###########################\n\n"
lsb_release -idrc

printf "\n##### kernel ############################\n\n"
uname -srvmpio
echo
sed 's/root=[^ ]*//;s/[ ]\+/, /g;s/^BOOT_IMAGE=[^ ]*/Parameters:/' /proc/cmdline

printf "\n##### desktop ###########################\n\n"
if [ -n "$DESKTOP_SESSION" ]; then
    DESKTOP="$DESKTOP_SESSION"
else
    DESKTOP=$(sed -n 's/^Session=\(.\+\)$/\1/p' "$HOME/.dmrc")
    DESKDMRC=" (from ~/.dmrc)"
fi
if [ -n "$DESKTOP" ]; then
    if [ -f "/usr/share/xsessions/$DESKTOP.desktop" ]; then
	DESKTOP=$(sed -n 's/^Name=\(.\+\)$/\1/p' "/usr/share/xsessions/$DESKTOP.desktop")
    fi
    echo "${DESKTOP/ Session/}${DESKDMRC}"
else
    printf "\nCould not be determined.\n"
fi

printf "\n##### lspci #############################\n\n"
lspci -nnk | grep -iA 2 '^[^[:space:]].*net' | sed '/^--$/d; /^[^[:space:]]/ i\\'

printf "\n##### lsusb #############################\n\n"
lsusb

printf "\n##### PCMCIA card info ##################\n\n"
if [ -x /sbin/pccardctl ]; then
    pccardctl info
else
    echo "'pccardctl' is not installed (package \"pcmciautils\")."
fi

printf "\n##### rfkill ############################\n\n"
rfkill list all

printf "\n##### lsmod #############################\n\n"
LSMOD=$(lsmod | egrep "(^|[[:punct:] ])($MODMATCHES|$LSMODMATCHES)[^[:punct:] ]*([[:punct:] ]|$)")
echo "$LSMOD"

printf "\n##### interfaces ########################\n\n"
sed '/^#/d;s/^wpa-psk [[:graph:]]\+/wpa-psk <WPA key removed>/' /etc/network/interfaces

printf "\n##### ifconfig ##########################\n\n"
if [ -x /sbin/ifconfig ]; then
    IFCONFIG=$(ifconfig -a)
else
    IFCONFIG=$(ip address show)
fi
echo "$IFCONFIG"
IFCONFIG=$(sed -n '1h; 1!H; ${g;s/\n /\\ /g;p}' <<< "$IFCONFIG")
IFACESETH=($(sed -n 's/^\([^ ]\+\)[ ]\+Link encap:Ethernet.*/\1/p; s#^[0-9]\+: \([^ :]\+\):.* link/ether.*#\1#p' <<< "$IFCONFIG"))
if (( ${#IFACESETH[@]} > 0 )); then
    IFETHMATCHES=${IFACESETH[@]}
    IFACEMATCHES="($IFACEMATCHES|(${IFETHMATCHES// /|}))"
fi

printf "\n##### iwconfig ##########################\n\n"
iwconfig

printf "\n##### route #############################\n\n"
if [ -x /sbin/route ]; then
    route -n
else
    ip route show
fi

printf "\n##### resolv.conf #######################\n\n"
grep -v '^#' /etc/resolv.conf

printf "\n##### network managers ##################\n\n"
printf "Installed:\n\n"
for NETMGRNR in "${!NETMGRPATHS[@]}"; do
    if [ -f "${NETMGRPATHS[$NETMGRNR]}" ]; then
	NETMGRINST+=("${NETMGRNAMES[$NETMGRNR]}")
    fi
done
printf "\t%s\n" "${NETMGRINST[@]:-None found.}"
NETMGRMATCHES=${NETMGRPATHS[@]/#*\//|}
NETMGRMATCHES=${NETMGRMATCHES// |/|}
NETMGRMATCHES="(${NETMGRMATCHES#|})"
printf "\nRunning:\n\n"
ps -ef | egrep "( |/)$NETMGRMATCHES($| )" || printf "\tNone found.\n"

printf "\n##### NetworkManager info ###############\n\n"
if [ -x /usr/bin/nm-tool ]; then
    nm-tool
elif [ -x /usr/bin/nmcli ]; then
    nmcli -f all device show | sed '/^GENERAL.DEVICE:[ ]\+lo$/,/^$/d; /^AP\[[0-9]\+\]\./d'
    echo
    nmcli -f SSID,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,ACTIVE,IN-USE device wifi list
else
    echo "NetworkManager is not installed (package \"network-manager\")."
fi

printf "\n##### NetworkManager.state ##############\n\n"
cat -s /var/lib/NetworkManager/NetworkManager.state

printf "\n##### NetworkManager.conf ###############\n\n"
grep -v '^#' /etc/NetworkManager/NetworkManager.conf
if [ -f /etc/NetworkManager/nm-system-settings.conf ]; then
    printf "\nnm-system-settings.conf (used up to Ubuntu 10.04):\n\n"
    grep -v '^#' /etc/NetworkManager/nm-system-settings.conf
fi

printf "\n##### NetworkManager profiles ###########\n\n"
if [ -d /etc/NetworkManager/system-connections ]; then
    if [ -n "$SUDO" ]; then
	trap "" 2 3
	NMPROFILES=$(find /etc/NetworkManager/system-connections -maxdepth 1 -type f -exec $SUDO${GKSUDO+ -D grep --}${KDESUDO+ -d --comment "<b>grep</b>$KDESUDOCMT" --} grep -vH '^$' {} +) && SUDOSUCCESS="yes" || SUDOSUCCESS="no"
	trap 2 3
	if [ "$SUDOSUCCESS" = "yes" ]; then
	    ORIGIFS="$IFS"
	    IFS=$'\n'
	    for NMWLPRFFILE in $(sed -n 's/^\(.\+\):type=\(802-11-wireless\|wifi\).*$/\1/p' <<< "$NMPROFILES"); do
		NMWLPRFFLPERMS=$(stat -c "%a %U" "$NMWLPRFFILE")
		NMWLPROFILE=($(sed -n "s;^$NMWLPRFFILE:\($NMPROFMATCHES.*\)$;\1 |;p" <<< "$NMPROFILES"))
		NMWLPROFSOUT+="[[$NMWLPRFFILE]] ($NMWLPRFFLPERMS)"$'\n'"${NMWLPROFILE[@]}"$'\n\n'
	    done
	    IFS="$ORIGIFS"
	    sed 's# | \[#\n\[#g;s#\] |#\]#g;s/ |$//' <<< "$NMWLPROFSOUT" | sed '/^\[[^]]*\]$/d'
	else
	    printf "\nAcquisition of admin privileges failed.\n"
	fi
    else
	echo "No way to acquire admin privileges found."
    fi
else
    echo "No NetworkManager profiles found."
fi

printf "\n##### Netplan config ####################\n\n"
for NPLANFILE in $(find /{lib,etc,run}/netplan -name "*.yaml" 2> /dev/null | sort); do
    NPLANFLCNT=$(egrep -v '^(#|$)' $NPLANFILE)
    if [ -n "$NPLANFLCNT" ]; then
	printf "[%s]\n%s\n\n" "$NPLANFILE" "$NPLANFLCNT"
    fi
done

printf "\n##### iw reg get ########################\n\n"
if [ -x /sbin/iw ]; then
    if IWREGGET=$(iw reg get 2>&1) && [ -f /etc/timezone ]; then
	REGION=$(cat /etc/timezone)
	printf "Region: %s (based on set time zone)\n\n" "$REGION"
    fi
    echo "$IWREGGET"
else
    echo "'iw' is not installed (package \"iw\")."
fi

printf "\n##### iwlist channels ###################\n\n"
if [ -x /sbin/iwlist ]; then
    iwlist chan
else
    echo "'iwlist' is not installed (package \"wireless-tools\")."
fi

printf "\n##### iwlist scan #######################\n\n"
if [ -x /sbin/iwlist ]; then
    if [ -n "$SUDO" ]; then
	trap "" 2 3
	IWLISTSCAN=$($SUDO${KDESUDO+ -d} iwlist scan) && SUDOSUCCESS="yes" || SUDOSUCCESS="no"
	trap 2 3
	if [ "$SUDOSUCCESS" = "yes" ]; then
	    if [[ $IWLISTSCAN = *Frequency:* ]]; then
		printf "Channel occupancy:\n\n"
		grep '^[ ]*Frequency:' <<< "$IWLISTSCAN" | sort | uniq -c | sed 's/^[ ]\+\([ ][0-9]\+\)[ ]\+/     \1   APs on   /'
		echo
	    fi
	    grep -v '^[ ]*IE: Unknown:' <<< "$IWLISTSCAN"
	else
	    printf "\nAcquisition of admin privileges failed.\n"
	fi
    else
	echo "No way to acquire admin privileges found."
    fi
else
    echo "'iwlist' is not installed (package \"wireless-tools\")."
fi

printf "\n##### module infos ######################\n\n"
MODULES=$(egrep -o "^$MODMATCHES[^ ]*" <<< "$LSMOD")
for MODULE in $MODULES; do
    MODINFO=$(modinfo $MODULE | egrep -v "^$MODINFOEXCL:")
    printf "[%s]\n%s\n\n" "$MODULE" "$MODINFO"
done

printf "\n##### module parameters #################\n\n"
for MODULE in $MODULES; do
    if [ -d /sys/module/$MODULE/parameters ]; then
	MODPARAMS=$(grep -H '^[[:graph:]]' /sys/module/$MODULE/parameters/* | sed 's#^.*/##;s/:/: /')
	printf "[%s]\n%s\n\n" "$MODULE" "$MODPARAMS"
    fi
done

printf "\n##### /etc/modules ######################\n\n"
grep -v '^#' /etc/modules

printf "\n##### modprobe options ##################\n\n"
for MODPROBEFILE in $(find /etc/modprobe.{conf,d} -name "*.conf" -regextype posix-egrep -not -regex ".*$MODPROBEXCL.*" 2> /dev/null | sort); do
    MODPROBEOPTS=$(egrep -v '^(#|$)' $MODPROBEFILE)
    if [ -n "$MODPROBEOPTS" ]; then
	printf "[%s]\n%s\n\n" "$MODPROBEFILE" "$MODPROBEOPTS"
    fi
done

printf "\n##### rc.local ##########################\n\n"
grep -v '^#' /etc/rc.local

printf "\n##### pm-utils ##########################\n\n"
for PMUTILSFILE in $(find /etc/pm/*.d \( -type f -o -type l \) -regextype posix-egrep -not -regex "$PMUTILSEXCL" | sort); do
    PMUTFLCONT=$(egrep -v '^(#|$)' $PMUTILSFILE)
    if [ -n "$PMUTFLCONT" ]; then
	PMUTFLPERMS=$(stat -c "%a %U" $PMUTILSFILE)
	printf "[%s] (%s)\n%s\n\n" "$PMUTILSFILE" "$PMUTFLPERMS" "$PMUTFLCONT"
    fi
done

printf "\n##### udev rules ########################\n\n"
for UDEVRLFILE in $(find /etc/udev/rules.d -name "*net*.rules" | sort); do
    UDEVRULES=$(grep -B1 '^[^#]' $UDEVRLFILE | egrep -v '^(--)?$')
    if [ -n "$UDEVRULES" ]; then
	printf "[%s]\n%s\n\n" "$UDEVRLFILE" "$UDEVRULES"
    fi
done

printf "\n##### dmesg #############################\n\n"
dmesg | tail -n 100 | egrep "[[:punct:] ]($MODMATCHES|$IFACEMATCHES|$DMESGMATCHES)[^[:punct:] ]*[[:punct:] ]" | egrep -v "$DMESGEXCL" | uniq -cf 2 | sed 's/^[ ]\+1[ ]\+//;s/^[ ]\+\([0-9]\+\)[ ]\+\(.\+\)$/\2 (repeated \1 times)/'

printf "\n########## wireless info END ############\n\n"

exec 2>&4 4>&-
exec 1>&3 3>&-

##### MAC address masking #####

RESULTS=$(cat -s "$OUTPUTDIR/$FILEBASE.txt")$'\n'

ORIGIFS="$IFS"
IFS=$'\n'

IFACESIDS=($(sed -n "/\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}/ {/\(00:\)\{5\}00/! {s/^\([^ ]\+\)[ ]\+.*HWaddr.*/'\1'/p; s/^[0-9]\+: \([^ :]\+\):.*/'\1'/p}}" <<< "$IFCONFIG"))
IFACESMACS=($(sed -n '/\(00:\)\{5\}00/! s#.*\(HWaddr\|link/[^ ]\+\) \(\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}\).*#\2#p' <<< "$IFCONFIG"))
IFACESIP6S=($(ip6-mac "${IFACESMACS[@]}"))

WLAPSIWLIDS=($(sed -n "/^[ ]*Cell [0-9]\+/,/^[ ]*ESSID:/ {/^[ ]*Cell [0-9]\+/h; /^[ ]*ESSID:/ {H;g;s/^[ ]*Cell 0\?\([0-9]\+\).*ESSID:\"\(.*\)\"$/'\2' [AC\1]/p}}" <<< "$IWLISTSCAN"))
WLAPSIWLMACS=($(sed -n 's/^[ ]*Cell [0-9]\+.*Address: \([^ ]\+\)/\1/p' <<< "$IWLISTSCAN"))
WLAPSIWLIP6S=($(ip6-mac "${WLAPSIWLMACS[@]}"))

WLAPSNMRAW=$(sed -n '/^##### NetworkManager info #####/,/^##### / {/^[ ]*Wireless Access Points/,/^$/ {/Wireless Access Points/d;s/^[ ]\+\*\?//;s/:[ ]\+/\t/;p}; /^SSID[ ]\+BSSID[ ]\+/,/^$/ {/^SSID[ ]\{2,\}BSSID[ ]\{2,\}/d;s/[ ]\{2,\}/\t/;p}}' <<< "$RESULTS")
WLAPSNMIDS=($(awk -F '\t' '{print "'\''" $1 "'\''"}' <<< "$WLAPSNMRAW"))
WLAPSNMMACS=($(grep -o '\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}' <<< "$WLAPSNMRAW"))
WLAPSNMIP6S=($(ip6-mac "${WLAPSNMMACS[@]}"))

IFS="$ORIGIFS"

for IFACENR in "${!IFACESMACS[@]}"; do
    MACMASKSED+="s;${IFACESMACS[$IFACENR]};<MAC ${IFACESIDS[$IFACENR]} [IF$(($IFACENR + 1))]>;I;"
    MACMASKSED+=" /${IFACESIP6S[$IFACENR]}/ s;${IFACESIP6S[$IFACENR]/#\\(::/\(};<IP6 ${IFACESIDS[$IFACENR]} [IF$(($IFACENR + 1))]>;I;"
    IFACEMACC=${IFACESMACS[$IFACENR]//:/}
    if [[ ${IFACESIDS[$IFACENR],,} =~ ${IFACEMACC,,} ]]; then
	MACMASKSED+="s;\(${IFACESIDS[$IFACENR]:1:3}\)$IFACEMACC;\1<IF from MAC [IF$(($IFACENR + 1))]>;Ig;"
    fi
done

for WLAPIWLNR in "${!WLAPSIWLMACS[@]}"; do
    MACMASKSED+="s;${WLAPSIWLMACS[$WLAPIWLNR]};<MAC ${WLAPSIWLIDS[$WLAPIWLNR]}>;I;"
    MACMASKSED+=" /${WLAPSIWLIP6S[$WLAPIWLNR]}/ s;${WLAPSIWLIP6S[$WLAPIWLNR]/#\\(::/\(};<IP6 ${WLAPSIWLIDS[$WLAPIWLNR]}>;I;"
done

for WLAPNMNR in "${!WLAPSNMMACS[@]}"; do
    MACMASKSED+="s;${WLAPSNMMACS[$WLAPNMNR]};<MAC ${WLAPSNMIDS[$WLAPNMNR]} [AN$(($WLAPNMNR + 1))]>;I;"
    MACMASKSED+=" /${WLAPSNMIP6S[$WLAPNMNR]}/ s;${WLAPSNMIP6S[$WLAPNMNR]/#\\(::/\(};<IP6 ${WLAPSNMIDS[$WLAPNMNR]} [AN$(($WLAPNMNR + 1))]>;I;"
done

sed "$MACMASKSED /\([[:alnum:]]\{2\}:\)\{6,\}/! s/\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}/<MAC address>/" <<< "$RESULTS" > "$OUTPUTDIR/$FILEBASE.txt"

##### The End #####

dialog_info "${TERMOUT+\n}Results saved in \"$OUTPUTDIR/$FILEBASE.txt\".${TERMOUT+\n}"

if (( $(stat -c %s "$OUTPUTDIR/$FILEBASE.txt") > 19968 )); then
    tar -czf "$OUTPUTDIR/$FILEBASE.tar.gz" -C "$OUTPUTDIR" "$FILEBASE.txt" && \
	dialog_info "Results also archived in \"$OUTPUTDIR/$FILEBASE.tar.gz\",${DIALOGBREAK}as they exceed the 19.5 kB size limit for \".txt\" attachments${DIALOGBREAK}on the Ubuntu Forums.${TERMOUT+\n}" || \
	dialog_error "Results exceed the 19.5 kB size limit for \".txt\" attachments${DIALOGBREAK}on the Ubuntu Forums, but archive could not be created.${TERMOUT+\n}"
fi

if [ -x /usr/bin/pastebinit ] && ping -nc 3 -w 6 -i 0.2 paste.ubuntu.com > /dev/null 2>&1; then
    PASTEBIN=$(dialog_question "Do you also want to post them${DIALOGBREAK}to your default 'pastebinit' provider?")
    if [[ ! $PASTEBIN =~ ^no?$ ]]; then
	PASTERESULT=$(pastebinit -i "$OUTPUTDIR/$FILEBASE.txt" -f text 2>&1) && PASTESUCCESS="yes"
	if [ "$PASTESUCCESS" = "yes" ]; then
	    dialog_info "${TERMOUT+\n}Pastebin successful:\n\n${PASTERESULT}${TERMOUT+\n}"
	else
	    if [ -n "$PASTERESULT" ]; then
		dialog_error "${TERMOUT+\n}Pastebin failed, error message is:\n\n${PASTERESULT}${TERMOUT+\n}"
	    else
		dialog_error "${TERMOUT+\n}Pastebin failed, no error message given.${TERMOUT+\n}"
	    fi
	fi
    else
	echo
    fi
fi

[JOPETA]

Perdón faltaba un trozo de código, precisamente el que ejecuta ese script y genera el archivo wireles-info.txt cuyo contenido es el que tienes que devolver. Mea culpa

Code: Select all

wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info && chmod +x wireless-info && ./wireless-info

[Dickfree]

SOLUCIONADO.
Gracias a Jopeta inefable colaborador. La solucion estuvo cuando cambie a la antena 1.
Los porcentajes de conectividad cambiaron de una 24% a 100%.
Todo muy simple gracias a tu sabiduría.
Un abrazo y FELICES FIESTAS!

[JOPETA]

Me alegra que te resultara tan sencillo. Igualmente ¡¡Felices Fiestas!!.

PD: Por favor, edita tu primer post (el que abre el hilo) haciendo clic en el icono del lápiz a la derecha y añade [Solucionado] a ese título. Gracias.