Linux Mint 19.3 no reconoce micrófono externo

Spanish Forum

Moderators: tomeu, JCSenar

Post Reply
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Debo preguntar, estás conectado al puerto rosa, ¿correcto?
Correcto
¿Y está utilizando un puerto USB2 en la computadora?
Todos mis puertos son USB 3.0


Bien, anoche era muy tarde y no se ni como hice las cosas. Esta mañana he repetido todas las pruebas.

Test 1: Enciendo el ordenador con el micrófono conectado al adaptador usb y los altavoces al jack del ordenador. Resultado de todas las pruebas:
arecord: main 788: error al abrir el audio: Dispositivo o recurso ocupado
Reinicio y paso a realizar el test 2: micrófono y altavoces conectados al adaptador, aunque podía haber dejado los altavoces desconectados, puesto que como en pavucontrol cambié el perfil a entrada solamente, momentaneamente no funcionan. Eso no es problema.

En las pruebas, con --device="hw:1,0" me permite grabar, pero no graba nada:
Image

En las pruebas, con --device="hw:2,0" (la tarjeta del ordenador) obtengo el mensaje:

Code: Select all

arecord: set_params: 1305: Contador de canales no disponible
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

In your pacmd list-sources outputs, sometimes the USB is card 1 and sometimes it has been card 2. This can happen after rebooting and makes things a little tricky. Here's what to look for when testing. First run pacmd list-sources, then look at the last 2 lines here:

Code: Select all

  * index: 1
	name: <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 56210 /  86% / -4,00 dB,   front-right: 56210 /  86% / -4,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 1 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
In this case, hw:1,0 should be used (alsa.card=1, alsa.device=0)
Something else that may help. In alsamixer for the Capture column lower the right side by pressing the c key until it is all the way down.

That change to Capture may be all you needed to do. You can test with any method you like.

-------------

En sus salidas de fuentes de lista de pacmd, a veces el USB es la tarjeta 1 y a veces ha sido la tarjeta 2. Esto puede suceder después de reiniciar y hace las cosas un poco más difíciles. Esto es lo que debe buscar al realizar la prueba. Primero ejecute pacmd list-sources, luego mire las últimas 2 líneas aquí:

Code: Select all

  * index: 1
	name: <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 56210 /  86% / -4,00 dB,   front-right: 56210 /  86% / -4,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 1 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
En este caso, se debe usar hw: 1,0 (alsa.card = 1, alsa.device = 0)
Algo más que puede ayudar. En alsamixer para la columna Capture, baje el lado derecho presionando la tecla c hasta que esté completamente hacia abajo.

Ese cambio a Capture puede ser todo lo que necesita hacer. Puede probar con cualquier método que desee.
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

En alsamixer no puedo bajar el canal derecho solo, cuando pulso c bajan los dos a la vez y el volumen baja a 0.

Image

Por mucho que intento no consigo nada, grabo archivos en los que no se oye nada. ¿Es obligatorio poner en pavucontrol entrada solamente? ¿Debería probar las otras configuraciones posibles?
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

Darn. I'm trying to figure out why it isn't working. The left and right lowering now makes some sense as pavucontrol seemed to have the lock icon inactive.

Have you tried a different USB port?


Maldito. Estoy tratando de entender por qué no está funcionando. La reducción a la izquierda y a la derecha ahora tiene algún sentido ya que el control de pavu parece tener el icono de bloqueo inactivo.

¿Has probado un puerto USB diferente?
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

Let's get a new look at this one again:

Code: Select all

curl https://gitlab.freedesktop.org/pulseaudio/pulseaudio/raw/master/src/utils/pa-info?inline=false | bash | nc termbin.com 9999
Veamos de nuevo este:

Code: Select all

curl https://gitlab.freedesktop.org/pulseaudio/pulseaudio/raw/master/src/utils/pa-info?inline=false | bash | nc termbin.com 9999
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Ok, parte 1:

Code: Select all

________________
> pulseaudio_ps_do
oscar     1139  0.5  0.2 1217284 18248 ?       S<sl 22:05   0:00 /usr/bin/pulseaudio --daemonize=no
oscar     2033  0.0  0.0  11460  1104 pts/0    S+   22:05   0:00 grep pulseaudio
________________
> which pulseaudio
/usr/bin/pulseaudio
________________
> pidof pulseaudio
1139
________________
> pulseaudio --version
pulseaudio 12.2-2
________________
> pactl info
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 7
Tile Size: 65472
User Name: oscar
Host Name: oscar-msi
Server Name: pulseaudio
Server Version: 12.2-2
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_03.0.hdmi-stereo-extra1
Default Source: alsa_input.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-mono
Cookie: 6692:40c3
________________
> pactl list
Module #0
	Name: module-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "12.2-2"

Module #1
	Name: module-stream-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "12.2-2"

Module #2
	Name: module-card-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "12.2-2"

Module #3
	Name: module-augment-properties
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "12.2-2"

Module #4
	Name: module-switch-on-port-available
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "David Henningsson"
		module.description = "Switches ports and profiles when devices are plugged/unplugged"
		module.version = "12.2-2"

Module #5
	Name: module-switch-on-connect
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Michael Terry"
		module.description = "When a sink/source is added, switch to it or conditionally switch to it"
		module.version = "12.2-2"

Module #6
	Name: module-udev-detect
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "12.2-2"

Module #7
	Name: module-alsa-card
	Argument: device_id="0" name="pci-0000_00_03.0" card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "12.2-2"

Module #8
	Name: module-alsa-card
	Argument: device_id="1" name="usb-C-Media_Electronics_Inc._USB_Audio_Device-00" card_name="alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "12.2-2"

Module #9
	Name: module-alsa-card
	Argument: device_id="2" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "12.2-2"

Module #10
	Name: module-native-protocol-unix
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "12.2-2"

Module #11
	Name: module-default-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "12.2-2"

Module #12
	Name: module-rescue-streams
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
		module.version = "12.2-2"

Module #13
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Siempre tenga al menos un sumidero cargado aunque sea uno nulo"
		module.version = "12.2-2"

Module #14
	Name: module-intended-roles
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "12.2-2"

Module #15
	Name: module-suspend-on-idle
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "12.2-2"

Module #16
	Name: module-console-kit
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "12.2-2"

Module #17
	Name: module-systemd-login
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "12.2-2"

Module #18
	Name: module-position-event-sounds
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "12.2-2"

Module #19
	Name: module-role-cork
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "12.2-2"

Module #20
	Name: module-snap-policy
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Canonical Ltd"
		module.description = "Ubuntu Snap policy management"
		module.version = "12.2-2"

Module #21
	Name: module-filter-heuristics
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "12.2-2"

Module #22
	Name: module-filter-apply
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "12.2-2"

Module #23
	Name: module-x11-publish
	Argument: display=:0
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "12.2-2"

Module #24
	Name: module-x11-cork-request
	Argument: display=:0
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "12.2-2"

Module #25
	Name: module-x11-xsmp
	Argument: display=:0 session_manager=local/oscar-msi:@/tmp/.ICE-unix/1003,unix/oscar-msi:/tmp/.ICE-unix/1003
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "12.2-2"

Sink #0
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_03.0.hdmi-stereo-extra1
	Description: Audio Interno Digital Stereo (HDMI 2)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_03.0.hdmi-stereo-extra1.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 1"
		alsa.id = "HDMI 1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "7"
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xf7214000 irq 51"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "160c"
		device.product.name = "Broadwell-U Audio Controller"
		device.form_factor = "internal"
		device.string = "hdmi:0,1"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra1"
		device.profile.description = "Digital Stereo (HDMI 2)"
		device.description = "Audio Interno Digital Stereo (HDMI 2)"
		alsa.mixer_name = "Intel Broadwell HDMI"
		alsa.components = "HDA:80862808,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, available)
	Active Port: hdmi-output-1
	Formats:
		pcm

Sink #1
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo
	Description: Audio Interno Estéreo Analógico
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 9
	Mute: no
	Volume: front-left: 31008 /  47% / -19.50 dB,   front-right: 31008 /  47% / -19.50 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC283 Analog"
		alsa.id = "ALC283 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7210000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:2"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Estéreo Analógico"
		device.description = "Audio Interno Estéreo Analógico"
		alsa.mixer_name = "Realtek ALC283"
		alsa.components = "HDA:10ec0283,1462b096,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		analog-output-headphones: Auriculares analógicos (priority: 9000, not available)
	Active Port: analog-output-headphones
	Formats:
		pcm

Source #0
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_03.0.hdmi-stereo-extra1.monitor
	Description: Monitor of Audio Interno Digital Stereo (HDMI 2)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_00_03.0.hdmi-stereo-extra1
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Audio Interno Digital Stereo (HDMI 2)"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xf7214000 irq 51"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "160c"
		device.product.name = "Broadwell-U Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:
		pcm

Source #1
	State: SUSPENDED
	Name: alsa_input.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-mono
	Description: Audio Adapter (Unitek Y-247A) Mono Analógico
	Driver: module-alsa-card.c
	Sample Specification: s16le 1ch 44100Hz
	Channel Map: mono
	Owner Module: 8
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 27111 /  41% / -23.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "USB Audio Device"
		alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/sound/card1"
		udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
		device.bus = "usb"
		device.vendor.id = "0d8c"
		device.vendor.name = "C-Media Electronics, Inc."
		device.product.id = "0014"
		device.product.name = "Audio Adapter (Unitek Y-247A)"
		device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
		device.string = "hw:1"
		device.buffering.buffer_size = "176400"
		device.buffering.fragment_size = "88200"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-mono"
		device.profile.description = "Mono Analógico"
		device.description = "Audio Adapter (Unitek Y-247A) Mono Analógico"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB0d8c:0014"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		analog-input-mic: Micrófono (priority: 8700)
	Active Port: analog-input-mic
	Formats:
		pcm

Source #2
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Description: Monitor of Audio Interno Estéreo Analógico
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 9
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Audio Interno Estéreo Analógico"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7210000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:
		pcm

Source #3
	State: SUSPENDED
	Name: alsa_input.pci-0000_00_1b.0.analog-stereo
	Description: Audio Interno Estéreo Analógico
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 9
	Mute: no
	Volume: front-left: 65214 / 100% / -0.13 dB,   front-right: 65214 / 100% / -0.13 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC283 Analog"
		alsa.id = "ALC283 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7210000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:2"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Estéreo Analógico"
		device.description = "Audio Interno Estéreo Analógico"
		alsa.mixer_name = "Realtek ALC283"
		alsa.components = "HDA:10ec0283,1462b096,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		analog-input: Entrada analógica (priority: 10000)
	Active Port: analog-input
	Formats:
		pcm

Client #0
	Driver: module-systemd-login.c
	Owner Module: 17
	Properties:
		application.name = "Login Session c1"
		systemd-login.session = "c1"

Client #2
	Driver: protocol-native.c
	Owner Module: 10
	Properties:
		application.name = "Cinnamon Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "4.4.1"
		application.process.id = "1115"
		application.process.user = "oscar"
		application.process.host = "oscar-msi"
		application.process.binary = "csd-media-keys"
		application.language = "es_ES.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "aaa642a1efb049fba8d6ca0c8d22ff0a"
		application.process.session_id = "c1"

Client #5
	Driver: module-x11-xsmp.c
	Owner Module: 25
	Properties:
		application.name = "XSMP Session on cinnamon-session as 102e49be0736aa82ef158784510236061700000010030050"
		xsmp.vendor = "cinnamon-session"
		xsmp.client.id = "102e49be0736aa82ef158784510236061700000010030050"

Client #6
	Driver: protocol-native.c
	Owner Module: 10
	Properties:
		application.name = "Cinnamon Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "4.4.1"
		application.process.id = "1296"
		application.process.user = "oscar"
		application.process.host = "oscar-msi"
		application.process.binary = "cinnamon"
		application.language = "es_ES.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "aaa642a1efb049fba8d6ca0c8d22ff0a"
		application.process.session_id = "c1"

Client #8
	Driver: protocol-native.c
	Owner Module: 10
	Properties:
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "2038"
		application.process.user = "oscar"
		application.process.host = "oscar-msi"
		application.process.binary = "pactl"
		application.language = "C"
		window.x11.display = ":0"
		application.process.machine_id = "aaa642a1efb049fba8d6ca0c8d22ff0a"
		application.process.session_id = "c1"

Card #0
	Name: alsa_card.pci-0000_00_03.0
	Driver: module-alsa-card.c
	Owner Module: 7
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xf7214000 irq 51"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "160c"
		device.product.name = "Broadwell-U Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Audio Interno"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Salida (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Salida (sinks: 1, sources: 0, priority: 5700, available: yes)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Salida (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Salida (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Salida (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Salida (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Salida (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Salida (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Salida (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Salida (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Salida (sinks: 1, sources: 0, priority: 600, available: no)
		off: Apagado (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:hdmi-stereo-extra1
	Ports:
		hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "LG IPS FULLHD"
			Part of profile(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (priority: 5500, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4

Card #1
	Name: alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00
	Driver: module-alsa-card.c
	Owner Module: 8
	Properties:
		alsa.card = "1"
		alsa.card_name = "USB Audio Device"
		alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/sound/card1"
		udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
		device.bus = "usb"
		device.vendor.id = "0d8c"
		device.vendor.name = "C-Media Electronics, Inc."
		device.product.id = "0014"
		device.product.name = "Audio Adapter (Unitek Y-247A)"
		device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
		device.string = "1"
		device.description = "Audio Adapter (Unitek Y-247A)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Profiles:
		input:analog-mono: Mono Analógico Entrada (sinks: 0, sources: 1, priority: 7, available: yes)
		output:analog-stereo: Estéreo Analógico Salida (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:analog-stereo+input:analog-mono: Estéreo Analógico Salida + Mono Analógico Entrada (sinks: 1, sources: 1, priority: 6507, available: yes)
		output:iec958-stereo: Estéreo Digital (IEC958) Salida (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:iec958-stereo+input:analog-mono: Estéreo Digital (IEC958) Salida + Mono Analógico Entrada (sinks: 1, sources: 1, priority: 5507, available: yes)
		off: Apagado (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: input:analog-mono
	Ports:
		analog-input-mic: Micrófono (priority: 8700, latency offset: 0 usec)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-mono, output:analog-stereo+input:analog-mono, output:iec958-stereo+input:analog-mono
		analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec)
			Properties:
				device.icon_name = "audio-speakers"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-mono
		iec958-stereo-output: Salida digital (S/PDIF) (priority: 0, latency offset: 0 usec)
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-mono

Card #2
	Name: alsa_card.pci-0000_00_1b.0
	Driver: module-alsa-card.c
	Owner Module: 9
	Properties:
		alsa.card = "2"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7210000 irq 52"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "2"
		device.description = "Audio Interno"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		input:analog-stereo: Estéreo Analógico Entrada (sinks: 0, sources: 1, priority: 65, available: yes)
		output:analog-stereo: Estéreo Analógico Salida (sinks: 1, sources: 0, priority: 6500, available: no)
		output:analog-stereo+input:analog-stereo: Estéreo Analógico.Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		off: Apagado (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input: Entrada analógica (priority: 10000, latency offset: 0 usec)
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-headphones"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
________________
> cat /etc/pulse/daemon.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0

flat-volumes = no

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
; deferred-volume-extra-delay-usec = 0
________________
> cat /etc/pulse/client.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; default-sink =
; default-source =
; default-server =
; default-dbus-server =

; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog

; cookie-file =

; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

; auto-connect-localhost = no
; auto-connect-display = no
________________
> cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)
.ifexists module-switch-on-connect.so
load-module module-switch-on-connect
.endif

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Block audio recording for snap confined packages unless they have
### the "pulseaudio" or "audio-record" interfaces plugged.
.ifexists module-snap-policy.so
load-module module-snap-policy
.endif

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input
________________
> cat /etc/pulse/system.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started in system
# mode.

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
Last edited by JCSenar on Sat Apr 25, 2020 4:37 pm, edited 1 time in total.
Reason: Añadido el formato [code]
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Y parte 2:

Code: Select all

### Enable positioned event sounds
load-module module-position-event-sounds
________________
> ls -alt /dev/snd/*
crw-rw----+ 1 root audio 116, 13 Apr 25 22:05 /dev/snd/pcmC2D0c
crw-rw----+ 1 root audio 116, 12 Apr 25 22:05 /dev/snd/pcmC2D0p
crw-rw----+ 1 root audio 116,  3 Apr 25 22:05 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116,  2 Apr 25 22:05 /dev/snd/pcmC1D0p
crw-rw----+ 1 root audio 116,  6 Apr 25 22:05 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116,  9 Apr 25 22:05 /dev/snd/pcmC0D10p
crw-rw----+ 1 root audio 116,  8 Apr 25 22:05 /dev/snd/pcmC0D9p
crw-rw----+ 1 root audio 116,  7 Apr 25 22:05 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116,  5 Apr 25 22:05 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 16 Apr 25 22:05 /dev/snd/controlC2
crw-rw----+ 1 root audio 116, 15 Apr 25 22:05 /dev/snd/hwC2D0
crw-rw----+ 1 root audio 116, 14 Apr 25 22:05 /dev/snd/pcmC2D2c
crw-rw----+ 1 root audio 116, 11 Apr 25 22:04 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 10 Apr 25 22:04 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116,  4 Apr 25 22:04 /dev/snd/controlC1
crw-rw----+ 1 root audio 116,  1 Apr 25 22:04 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 25 22:04 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 100 Apr 25 22:05 .
lrwxrwxrwx 1 root root  12 Apr 25 22:05 pci-0000:00:1b.0 -> ../controlC2
lrwxrwxrwx 1 root root  12 Apr 25 22:04 pci-0000:00:03.0 -> ../controlC0
drwxr-xr-x 4 root root 420 Apr 25 22:04 ..
lrwxrwxrwx 1 root root  12 Apr 25 22:04 pci-0000:00:14.0-usb-0:2:1.0 -> ../controlC1

/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root  60 Apr 25 22:04 .
drwxr-xr-x 4 root root 420 Apr 25 22:04 ..
lrwxrwxrwx 1 root root  12 Apr 25 22:04 usb-C-Media_Electronics_Inc._USB_Audio_Device-00 -> ../controlC1
________________
> lsof /dev/snd/*
COMMAND    PID  USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
pulseaudi 1139 oscar   17u   CHR 116,11      0t0  510 /dev/snd/controlC0
pulseaudi 1139 oscar   24u   CHR 116,11      0t0  510 /dev/snd/controlC0
pulseaudi 1139 oscar   29u   CHR  116,4      0t0  499 /dev/snd/controlC1
pulseaudi 1139 oscar   31u   CHR 116,16      0t0  516 /dev/snd/controlC2
pulseaudi 1139 oscar   38u   CHR 116,16      0t0  516 /dev/snd/controlC2
pulseaudi 1139 oscar   43u   CHR 116,16      0t0  516 /dev/snd/controlC2
________________
> jacks_do
card=0
numid=25,iface=CARD,name='HDMI/DP,pcm=10 Jack'
  ; type=BOOLEAN,access=r-------,values=1
  : values=off
numid=1,iface=CARD,name='HDMI/DP,pcm=3 Jack'
  ; type=BOOLEAN,access=r-------,values=1
  : values=off
numid=7,iface=CARD,name='HDMI/DP,pcm=7 Jack'
  ; type=BOOLEAN,access=r-------,values=1
  : values=on
numid=13,iface=CARD,name='HDMI/DP,pcm=8 Jack'
  ; type=BOOLEAN,access=r-------,values=1
  : values=off
numid=19,iface=CARD,name='HDMI/DP,pcm=9 Jack'
  ; type=BOOLEAN,access=r-------,values=1
  : values=off
card=1
card=2
numid=6,iface=CARD,name='Headphone Jack'
  ; type=BOOLEAN,access=r-------,values=1
  : values=off
________________
> aplay -L
default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA Intel HDMI, HDMI 4
    HDMI Audio Output
dmix:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample mixing device
dmix:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct sample mixing device
dmix:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct sample mixing device
dmix:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Direct sample mixing device
dmix:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Direct sample snooping device
hw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=9
    HDA Intel HDMI, HDMI 3
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=10
    HDA Intel HDMI, HDMI 4
    Hardware device with all software conversions
sysdefault:CARD=Device
    USB Audio Device, USB Audio
    Default Audio Device
front:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Front speakers
surround21:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Direct sample mixing device
dsnoop:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Direct sample snooping device
hw:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Hardware device with all software conversions
sysdefault:CARD=PCH
    HDA Intel PCH, ALC283 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Hardware device with all software conversions
________________
> arecord -L
default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
sysdefault:CARD=Device
    USB Audio Device, USB Audio
    Default Audio Device
front:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Front speakers
surround21:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Direct sample mixing device
dsnoop:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Direct sample snooping device
hw:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
    USB Audio Device, USB Audio
    Hardware device with all software conversions
sysdefault:CARD=PCH
    HDA Intel PCH, ALC283 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Front speakers
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Direct sample mixing device
dmix:CARD=PCH,DEV=2
    HDA Intel PCH, ALC283 Alt Analog
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=2
    HDA Intel PCH, ALC283 Alt Analog
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=2
    HDA Intel PCH, ALC283 Alt Analog
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=2
    HDA Intel PCH, ALC283 Alt Analog
    Hardware device with all software conversions
________________
> alsa_info_do
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################

!!Script ran on: Sat Apr 25 20:05:40 UTC 2020


!!Linux Distribution
!!------------------

Linux Mint 19.3 Tricia \n \l DISTRIB_ID=LinuxMint DISTRIB_DESCRIPTION="Linux Mint 19.3 Tricia" NAME="Linux Mint" ID=linuxmint ID_LIKE=ubuntu PRETTY_NAME="Linux Mint 19.3" HOME_URL="https://www.linuxmint.com/" SUPPORT_URL="https://forums.ubuntu.com/" BUG_REPORT_URL="http://linuxmint-troubleshooting-guide.readthedocs.io/en/latest/" PRIVACY_POLICY_URL="https://www.linuxmint.com/" UBUNTU_CODENAME=bionic


!!DMI Information
!!---------------

Manufacturer:      MICRO-STAR INTERNATIONAL CO., LTD
Product Name:      MS-B09611
Product Version:   
Firmware Version:  EB096IMS V1.2


!!Kernel Information
!!------------------

Kernel release:    5.3.0-46-generic
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         x86_64
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     k5.3.0-46-generic
Library version:    
Utilities version:  1.1.3


!!Loaded ALSA modules
!!-------------------

snd_hda_intel
snd_usb_audio
snd_hda_intel


!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - Yes


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xf7214000 irq 51
 1 [Device         ]: USB-Audio - USB Audio Device
                      C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-2, full speed
 2 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf7210000 irq 52


!!PCI Soundcards installed in the system
!!--------------------------------------

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------

00:03.0 0403: 8086:160c (rev 09)
	Subsystem: 1462:b096
--
00:1b.0 0403: 8086:9ca0 (rev 03)
	Subsystem: 1462:b096


!!Modprobe options (Sound related)
!!--------------------------------

snd_pcsp: index=-2
snd_usb_audio: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2


!!Loaded sound module options
!!---------------------------

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
	dmic_detect : Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	pm_blacklist : Y
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 1
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : -1
	snoop : -1

!!Module: snd_usb_audio
	autoclock : Y
	device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	ignore_ctl_error : N
	index : -2,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	use_vmalloc : Y
	vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
	dmic_detect : Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	pm_blacklist : Y
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 1
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : -1
	snoop : -1


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Intel Broadwell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862808
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled GenLevel KAE
  Digital category: 0x2
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 3
     0x02* 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560030: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC283
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0283
Subsystem Id: 0x1462b096
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Master Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC283 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x3d 0x3d]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Device: name="ALC283 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Device: name="ALC283 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 5
     0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00]
  Connection: 1
     0x0d
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x12
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0c
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80]
  Pincap 0x00000010: OUT
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001373c: IN OUT HP EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x40561a2d: [N/A] Digital Out at Ext N/A
    Conn = Digital, Color = Black
    DefAssociation = 0x2, Sequence = 0xd
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=73
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Master Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01211010: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c* 0x0d
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x0b
--endcollapse--


!!USB Mixer information
!!---------------------
--startcollapse--

USB Mixer: usb_id=0x0d8c0014, ctrlif=0, ctlerr=0
Card: C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-2, full speed
  Unit: 9
    Control: name="Speaker Playback Volume", index=0
    Info: id=9, control=2, cmask=0x3, channels=2, type="S16"
    Volume: min=-9472, max=0, dBmin=-3700, dBmax=0
  Unit: 9
    Control: name="Speaker Playback Switch", index=0
    Info: id=9, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
    Volume: min=0, max=1, dBmin=0, dBmax=0
  Unit: 10
    Control: name="Auto Gain Control", index=0
    Info: id=10, control=7, cmask=0x0, channels=1, type="BOOLEAN"
    Volume: min=0, max=1, dBmin=0, dBmax=0
  Unit: 10
    Control: name="Mic Capture Volume", index=0
    Info: id=10, control=2, cmask=0x0, channels=1, type="S16"
    Volume: min=-3072, max=5888, dBmin=-1200, dBmax=2300
  Unit: 10
    Control: name="Mic Capture Switch", index=0
    Info: id=10, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
    Volume: min=0, max=1, dBmin=0, dBmax=0
  Unit: 13
    Control: name="Mic Playback Volume", index=0
    Info: id=13, control=2, cmask=0x0, channels=1, type="S16"
    Volume: min=-5888, max=2048, dBmin=-2300, dBmax=800
  Unit: 13
    Control: name="Mic Playback Switch", index=0
    Info: id=13, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
    Volume: min=0, max=1, dBmin=0, dBmax=0
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw----+ 1 root audio 116, 11 Apr 25 22:04 /dev/snd/controlC0
crw-rw----+ 1 root audio 116,  4 Apr 25 22:04 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 16 Apr 25 22:05 /dev/snd/controlC2
crw-rw----+ 1 root audio 116, 10 Apr 25 22:04 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 15 Apr 25 22:05 /dev/snd/hwC2D0
crw-rw----+ 1 root audio 116,  9 Apr 25 22:05 /dev/snd/pcmC0D10p
crw-rw----+ 1 root audio 116,  5 Apr 25 22:05 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116,  6 Apr 25 22:05 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116,  7 Apr 25 22:05 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116,  8 Apr 25 22:05 /dev/snd/pcmC0D9p
crw-rw----+ 1 root audio 116,  3 Apr 25 22:05 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116,  2 Apr 25 22:05 /dev/snd/pcmC1D0p
crw-rw----+ 1 root audio 116, 13 Apr 25 22:05 /dev/snd/pcmC2D0c
crw-rw----+ 1 root audio 116, 12 Apr 25 22:05 /dev/snd/pcmC2D0p
crw-rw----+ 1 root audio 116, 14 Apr 25 22:05 /dev/snd/pcmC2D2c
crw-rw----+ 1 root audio 116,  1 Apr 25 22:04 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 25 22:04 /dev/snd/timer

/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root  60 Apr 25 22:04 .
drwxr-xr-x 4 root root 420 Apr 25 22:04 ..
lrwxrwxrwx 1 root root  12 Apr 25 22:04 usb-C-Media_Electronics_Inc._USB_Audio_Device-00 -> ../controlC1

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 100 Apr 25 22:05 .
drwxr-xr-x 4 root root 420 Apr 25 22:04 ..
lrwxrwxrwx 1 root root  12 Apr 25 22:04 pci-0000:00:03.0 -> ../controlC0
lrwxrwxrwx 1 root root  12 Apr 25 22:04 pci-0000:00:14.0-usb-0:2:1.0 -> ../controlC1
lrwxrwxrwx 1 root root  12 Apr 25 22:05 pci-0000:00:1b.0 -> ../controlC2


!!Aplay/Arecord output
!!--------------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 2: ALC283 Alt Analog [ALC283 Alt Analog]
  Subdevices: 2/2
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [HDMI]

Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7214000 irq 51'
  Mixer name	: 'Intel Broadwell HDMI'
  Components	: 'HDA:80862808,80860101,00100000'
  Controls      : 35
  Simple ctrls  : 5
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',3
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',4
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

!!-------Mixer controls for card 1 [Device]

Card hw:1 'Device'/'C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-2, full speed'
  Mixer name	: 'USB Mixer'
  Components	: 'USB0d8c:0014'
  Controls      : 10
  Simple ctrls  : 3
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 37
  Mono:
  Front Left: Playback 33 [89%] [-4.00dB] [on]
  Front Right: Playback 33 [89%] [-4.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pvolume-joined cvolume cvolume-joined pswitch pswitch-joined cswitch cswitch-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: Playback 0 - 31 Capture 0 - 35
  Mono: Playback 23 [74%] [0.00dB] [on] Capture 35 [100%] [23.00dB] [on]
Simple mixer control 'Auto Gain Control',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

!!-------Mixer controls for card 2 [PCH]

Card hw:2 'PCH'/'HDA Intel PCH at 0xf7210000 irq 52'
  Mixer name	: 'Realtek ALC283'
  Components	: 'HDA:10ec0283,1462b096,00100003'
  Controls      : 11
  Simple ctrls  : 4
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 61 [70%] [-19.50dB] [on]
  Front Right: Playback 61 [70%] [-19.50dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Beep',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'


!!Alsactl output
!!--------------

--startcollapse--
state.HDMI {
	control.1 {
		iface CARD
		name 'HDMI/DP,pcm=3 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.2 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.3 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.4 {
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.5 {
		iface
Last edited by JCSenar on Sat Apr 25, 2020 4:38 pm, edited 1 time in total.
Reason: Añadido el formato [code]
Top
User avatar
JCSenar
Level 11
Level 11
Posts: 3621
Joined: Sat Sep 06, 2014 6:26 pm
Location: Irun, España
Contact:
Contact JCSenar

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by JCSenar »

osgradel wrote: ↑
Sat Apr 25, 2020 4:09 pm
 Y parte 2:
Por favor, osgradel, utiliza el botón code </> para insertar código en los mensajes.
Image
Si tu consulta ha sido resuelta, por favor, edita tu primer mensaje y añade [SOLUCIONADO] al título. Gracias.
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Cierto. Mis disculpas.
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

Run alsamixer -c1 then press F5 and try playing with the various controls. I'm really stumped as to why it's not working.

Another option is to install and run Audacity and see if you can get it recognized and working in there. You may need to change the mic in Audacity from default to hw:1,0

If and when we figure out how to get it working, I should be able to help you set it up so it's stays working and available everywhere.

Oh, one thing I can't remember if we've tried is to delete the files in /home/YourUserName/.config/pulse then run pulseaudio -k in the terminal.

---------------------

Ejecute alsamixer -c1 luego presione F5 e intente jugar con los diversos controles. Estoy realmente perplejo de por qué no está funcionando.

Otra opción es instalar y ejecutar Audacity y ver si puede reconocerlo y trabajar allí. Es posible que deba cambiar el micrófono en Audacity de forma predeterminada a hw:1,0

Si descubrimos cómo hacerlo funcionar, debería poder ayudarlo a configurarlo para que siga funcionando y esté disponible en todas partes.

Oh, una cosa que no recuerdo si lo hemos intentado es eliminar los archivos en /home/YourUserName/.config/pulse y luego ejecutar pulseaudio -k en la terminal.
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Bueno, te cuento lo que he intentado hoy:

*Eliminolos archivos en /home/mi_usuario/.config/pulse y en la terminal pulseaudio -k. Así vuelvo a la configuración original, ¿cierto?
Esta es la entrada
Image
La salida
Image
La configuración
Image

*Abro Audacity y no me reconoce el dispositivo, reinicio y ya lo reconoce. Lo pongo como predeterminado.

*Después he cambiado la configuración a Mono Analógico Entrada y he ido cambiando parámetros en Alsamixer.

Estos son los originales:
Image
Según leo en la man page de alsamixer, "CAPTURE in red appears when the capture switch is turned on" (CAPTURA en rojo aparece cuando el interruptor de captura se enciende), y he probado a ir mutando los dispositivos de salida, sin éxito.

*Cada vez que he cambiado un parámetro en pavucontrol o alsamixer, al abrir Audacity después, me encuentro el siguiente mensaje:
Image

...pero la segunda vez que lo intento me deja intentar grabar sonido, pero nunca captura nada.
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

AHA! The Mic column is muted!!

Move to the Mic column and press the m key.

---------------

AHA! ¡La columna de micrófono está silenciada!

Muévase a la columna Mic y presione la tecla m.
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Eso también lo he probado, y no consigo nada.
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

This is the first Mic, showing 74 at the bottom in your image, correct?

Este es el primer micrófono, que muestra 74 en la parte inferior de su imagen, ¿correcto?
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Esta es la entrada
Image

Y esta la salida, aquí estaba apagado.
Image
Pero así tampoco funciona
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

Darn. I should have known it wouldn't be that simple!

See if this makes a difference: sudo modprobe -r snd-usb-audio followed by sudo modprobe snd-usb-audio

------------------

Maldito. ¡Debería haber sabido que no sería tan simple!

Vea si esto hace la diferencia: sudo modprobe -r snd-usb-audio seguido de sudo modprobe snd-usb-audio
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Cuando ingreso sudo modprobe -r snd-usb-audio obtengo este error: modprobe: FATAL: Module snd_usb_audio is in use.


Con el segundo código, sudo modprobe snd-usb-audio la terminal no muestra ningún mensaje, pero tampoco se graba el sonido.
Top
User avatar
MrEen
Level 22
Level 22
Posts: 16918
Joined: Mon Jun 12, 2017 8:39 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by MrEen »

Try rebooting, and before trying to play any sound, see if the above commands will work. If the first gives you the same error, there's no need to run the second command

Intente reiniciar, y antes de intentar reproducir cualquier sonido, vea si los comandos anteriores funcionarán. Si el primero le da el mismo error, no hay necesidad de ejecutar el segundo comando
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

Reiniciando obtengo exactamente el mismo resultado
Top
osgradel
Level 1
Level 1
Posts: 40
Joined: Thu Apr 16, 2020 4:15 pm

Re: Linux Mint 19.3 no reconoce micrófono externo

Post by osgradel »

He probado esto:

Code: Select all

$ sudo alsa force-unload 
      
Unloading ALSA sound driver modules: snd-seq-dummy snd-seq-midi snd-seq-midi-event snd-seq snd-usb-audio snd-usbmidi-lib snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-nhlt snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-rawmidi snd-seq-device snd-timer (failed: modules still loaded: snd-usb-audio snd-usbmidi-lib snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-nhlt snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-rawmidi snd-seq-device snd-timer).

$ sudo modprobe -r snd-usb-audio
modprobe: FATAL: Module snd_usb_audio is in use.
Supuestamente el módulo snd_usb_audio debería de haber dejado de estar en uso, ¿es correcto?

EDITO: Acabo de ver que el comando no consigue parar dicho módulo
Top
Post Reply

Return to “Español (Spanish)”