"nomodeset" и второй монитор/проектор

Russian Forum
Post Reply
DjSapsan
Level 1
Level 1
Posts: 10
Joined: Thu Jun 14, 2018 4:39 am

"nomodeset" и второй монитор/проектор

Post by DjSapsan » Thu Jun 21, 2018 5:51 am

Сначала я описал свою проблему в Main Support, но так и не получил удовлетворительный ответ. Потом нашел русский язык тут, может кто поможет.

Линукс mint 18.3 silvia. Ноут HP. Проблема при подключении второго монитора/проектора. Когда я использую параметр nomodeset в grub, то монитор не подключается, после длительных поисков попробовал отключить nomodeset и второй монитор заработал. НО! Без данного параметра мой ноутбук зависает полностью, лечится только выключением долгим нажатием кнопки. Инфа о системе.

Code: Select all

System:    Host: xxx Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: MATE 1.18.0 (Gtk 3.18.9-1ubuntu3.3)
           Distro: Linux Mint 18.3 Sylvia
Machine:   System: Hewlett-Packard product: HP 250 G4 Notebook PC v: Type1ProductConfigId
           Mobo: Hewlett-Packard model: 80C5 v: 97.45
           Bios: Insyde v: F.1E date: 12/25/2015
CPU:       Dual core Intel Celeron N3050 (-MCP-) cache: 1024 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 6400
           clock speeds: max: 2160 MHz 1: 2082 MHz 2: 2132 MHz
Graphics:  Card: Intel Device 22b1 bus-ID: 00:02.0
           Display Server: X.Org 1.18.4 drivers: fbdev (unloaded: vesa) FAILED: intel
           Resolution: 1366x768@76.00hz
           GLX Renderer: llvmpipe (LLVM 5.0, 128 bits)
           GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio:     Card Intel Device 2284 driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: 1000 bus-ID: 02:00.0
           IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (3.3% used)
           ID-1: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB
Partition: ID-1: / size: 455G used: 16G (4%) fs: ext4 dev: /dev/sda2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 47.0C mobo: 27.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 223 Uptime: 5:16 Memory: 1540.0/3794.4MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35 

Code: Select all

[    31.879] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=cb50639e-db08-4fa7-b52a-e24402772f4b ro nomodeset acpi_osi=
[    33.434] (==) Matched modesetting as autoconfigured driver 1
[    33.434] (==) Matched fbdev as autoconfigured driver 2
[    33.435] (II) LoadModule: "modesetting"
[    33.435] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    33.472] (II) Module modesetting: vendor="X.Org Foundation"
[    33.472] (II) LoadModule: "fbdev"
[    33.473] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    33.613] (II) Module fbdev: vendor="X.Org Foundation"
[    33.722] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    33.722] (II) FBDEV: driver for framebuffer: fbdev
[    33.731] (WW) Falling back to old probe method for modesetting
[    33.732] (II) Loading sub module "fbdevhw"
[    33.732] (II) LoadModule: "fbdevhw"
[    33.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    33.850] (II) Module fbdevhw: vendor="X.Org Foundation"
[    33.850] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    33.850] (II) FBDEV(1): using default device
[    33.850] (II) UnloadModule: "modesetting"
[    33.850] (II) FBDEV(0): Creating default Display subsection in Screen section
[    33.850] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    33.850] (==) FBDEV(0): RGB weight 888
[    33.850] (==) FBDEV(0): Default visual is TrueColor
[    33.850] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    33.850] (II) FBDEV(0): hardware: EFI VGA (video memory: 4160kB)
[    33.850] (II) FBDEV(0): checking modes against framebuffer device...
[    33.850] (II) FBDEV(0): checking modes against monitor...
[    33.851] (--) FBDEV(0): Virtual size is 1366x768 (pitch 1366)
[    33.851] (**) FBDEV(0):  Built-in mode "current": 104.9 MHz, 60.5 kHz, 76.4 Hz
[    33.851] (II) FBDEV(0): Modeline "current"x0.0  104.92  1366 1398 1566 1734  768 772 776 792 -hsync -vsync -csync (60.5 kHz b)
[    33.851] (==) FBDEV(0): DPI set to (96, 96)
[    33.903] (**) FBDEV(0): using shadow framebuffer
[    33.952] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    34.099] (==) FBDEV(0): Backing store enabled
[    34.101] (==) FBDEV(0): DPMS enabled
dr.png
dr.png (39.14 KiB) Viewed 272 times
Мне в первом посте уже давали советы, если не хотите повторений, то лучше пересмотрите мое первое обращение.

Post Reply

Return to “Русский (Russian)”