This sorted my issue in <20mins, thank you so much!
No Wifi Realtek RTL8821CE 19.1
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Re: No Wifi Realtek RTL8821CE 19.1
Last edited by karlchen on Wed Dec 01, 2021 11:17 am, edited 1 time in total.
Reason: shortened the full post quote of the post right above
Reason: shortened the full post quote of the post right above
-
- Level 1
- Posts: 3
- Joined: Wed Dec 01, 2021 10:31 am
Re: No Wifi Realtek RTL8821CE 19.1
https://termbin.com/oiacPierre wrote: ⤴Wed Mar 13, 2019 3:02 am Open Terminal and run these:Code: Select all
wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info && chmod +x wireless-info && ./wireless-info
Post URL from Terminal, back here, on your reply.Code: Select all
cat wireless-info.txt | nc termbin.com 9999
Re: No Wifi Realtek RTL8821CE 19.1
Hello, [pvxf2647].
How to post your Linux Mint System Information (inxi report)
Regards,
Karl
Thank you for your detailled problem report. Please, also share your Linux Mint System Information (inxi output) with us, as explained step by step here:
How to post your Linux Mint System Information (inxi report)
Regards,
Karl
The people of Alderaan have been bravely fighting back the clone warriors sent out by the unscrupulous Sith Lord Palpatine for 771 days now.
Lifeline
Re: No Wifi Realtek RTL8821CE 19.1
[pvxf2647],
You should disable secure boot in Bios/Uefi, then see if wifi works.
You should disable secure boot in Bios/Uefi, then see if wifi works.
Last edited by sleeper12 on Wed Dec 01, 2021 11:26 pm, edited 2 times in total.
-
- Level 1
- Posts: 3
- Joined: Wed Dec 01, 2021 10:31 am
Re: No Wifi Realtek RTL8821CE 19.1
Code: Select all
System:
Kernel: 5.4.0-91-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Cinnamon 5.0.7 wm: muffin dm: LightDM Distro: Linux Mint 20.2 Uma
base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: HP product: HP Laptop 15-dw0xxx
v: Type1ProductConfigId serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: HP model: 85F5 v: 39.43 serial: <filter> UEFI: Insyde v: F.43
date: 03/31/2021
Battery:
ID-1: BAT1 charge: 34.1 Wh condition: 40.2/41.0 Wh (98%) volts: 12.1/11.4
model: COMPAL PABAS0241231 serial: <filter> status: Discharging
CPU:
Topology: Quad Core model: Intel Pentium Silver N5030 bits: 64 type: MCP
arch: Goldmont Plus rev: 8 L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 8755
Speed: 1295 MHz min/max: 800/3100 MHz Core speeds (MHz): 1: 1092 2: 1095
3: 1023 4: 1125
Graphics:
Device-1: Intel UHD Graphics 605 vendor: Hewlett-Packard driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:3184
Display: x11 server: X.Org 1.20.11 driver: modesetting
unloaded: fbdev,vesa resolution: 1366x768~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics 605 (GLK 3) v: 4.6 Mesa 21.0.3
direct render: Yes
Audio:
Device-1: Intel vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
bus ID: 00:0e.0 chip ID: 8086:3198
Device-2: Razer USA USB2.1 Hub type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-1.1:4
chip ID: 1532:0d02
Device-3: Razer USA type: USB driver: snd-usb-audio,uvcvideo
bus ID: 2-1.2:3 chip ID: 1532:0d01
Sound Server: ALSA v: k5.4.0-91-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: N/A port: 1000 bus ID: 02:00.0
chip ID: 10ec:c821
Drives:
Local Storage: total: 1013.35 GiB used: 23.88 GiB (2.4%)
ID-1: /dev/sda vendor: SanDisk model: SDSSDH3 1T02 size: 953.87 GiB
speed: 6.0 Gb/s serial: <filter>
ID-2: /dev/sdb type: USB model: Multiple Card Reader size: 59.48 GiB
serial: <filter>
Partition:
ID-1: / size: 457.35 GiB used: 10.52 GiB (2.3%) fs: ext4 dev: /dev/sda4
ID-2: /home size: 457.34 GiB used: 1.63 GiB (0.4%) fs: ext4 dev: /dev/dm-0
Sensors:
System Temperatures: cpu: 38.0 C mobo: 20.0 C
Fan Speeds (RPM): N/A
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/inkscape_dev-stable-focal.list
1: deb http://ppa.launchpad.net/inkscape.dev/stable/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/numix-ppa-focal.list
1: deb http://ppa.launchpad.net/numix/ppa/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/obsproject-obs-studio-focal.list
1: deb http://ppa.launchpad.net/obsproject/obs-studio/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com uma main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ focal partner
Info:
Processes: 219 Uptime: 55m Memory: 3.66 GiB used: 1.88 GiB (51.4%)
Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Shell: bash
v: 5.0.17 running in: gnome-terminal inxi: 3.0.38
Last edited by karlchen on Wed Dec 01, 2021 7:43 pm, edited 1 time in total.
Reason: Removed full post quote of post right above. Enclosed inxi output in [code] tags in order to preserve the inxi screen output formatting
Reason: Removed full post quote of post right above. Enclosed inxi output in [code] tags in order to preserve the inxi screen output formatting
-
- Level 1
- Posts: 3
- Joined: Wed Dec 01, 2021 10:31 am