[SOLVED] Mint Freezes with no Keyboard/Mouse response
Posted: Sun Apr 08, 2018 5:56 pm
Hey all. I just recently built a new computer and installed Cinnamon 18.3 on it. I have been using this for about 6 months on an old laptop with no issue, but on the new PC I am getting freezes.
Typically a freeze will happen within a couple hours of startup. It seems that it must be happening with certain clicks or events because I have yet to come back to it frozen after sitting. It is usually while I am using it.
I've found a few unresolved threads, and some out of date info for earlier versions, but as yet am not really clear on what is causing it. Unfortunately I have not been able to get to a terminal through any key combinations since the keyboard it frozen out (num and caps lock lights are unresponsive and stay as they were at the freeze).
Here is my setup:
Typically a freeze will happen within a couple hours of startup. It seems that it must be happening with certain clicks or events because I have yet to come back to it frozen after sitting. It is usually while I am using it.
I've found a few unresolved threads, and some out of date info for earlier versions, but as yet am not really clear on what is causing it. Unfortunately I have not been able to get to a terminal through any key combinations since the keyboard it frozen out (num and caps lock lights are unresponsive and stay as they were at the freeze).
Here is my setup:
Code: Select all
System: Host: abc-MS-7A34 Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: Micro-Star model: B350 PC MATE (MS-7A34) v: 2.0
Bios: American Megatrends v: A.90 date: 12/06/2017
CPU: Quad core AMD Ryzen 5 1500X (-HT-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 27997
clock speeds: max: 3500 MHz 1: 1550 MHz 2: 1550 MHz 3: 1550 MHz
4: 1550 MHz 5: 1550 MHz 6: 1550 MHz 7: 1550 MHz 8: 3000 MHz
Graphics: Card: NVIDIA Device 128b bus-ID: 23:00.0
Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
Resolution: 1600x900@60.00hz
GLX Renderer: NV106
GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD] Device 1457
driver: snd_hda_intel bus-ID: 25:00.3
Card-2 NVIDIA GK208 HDMI/DP Audio Controller
driver: snd_hda_intel bus-ID: 23:00.1
Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: f000 bus-ID: 21:00.0
IF: enp33s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 250.1GB (19.5% used)
ID-1: /dev/sda model: ST3250310AS size: 250.1GB
Partition: ID-1: / size: 221G used: 38G (19%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 8.54GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 37.0
Info: Processes: 239 Uptime: 6 min Memory: 934.5/7994.7MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35