Suspend fails 50% of time with Mint 19.1 Tessa

Quick to answer questions about finding your way around Linux Mint as a new user.
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
User avatar
panorain
Level 5
Level 5
Posts: 571
Joined: Mon Dec 16, 2013 3:21 pm

Suspend fails 50% of time with Mint 19.1 Tessa

Post by panorain »

Hello there,

I have installed Mint 19.1 Beta on my desktop computer.

Mate terminal command ----> inxi -Fxz

System:
Host: deb-B667 Kernel: 4.15.0-42-generic x86_64 bits: 64 compiler: gcc
v: 7.3.0 Desktop: MATE 1.20.1 Distro: Linux Mint 19.1 Tessa
base: Ubuntu 18.04 bionic
Machine:
Type: Desktop System: powerspec product: B667 v: 10/21/09 serial: <filter>
Mobo: ECS model: G43T-AM v: 2.0 serial: <filter> BIOS: American Megatrends
v: 080015 date: 10/16/2009
CPU:
Topology: Quad Core model: Intel Core2 Quad Q8400 bits: 64 type: MCP
arch: Penryn rev: A L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 21334
Speed: 2000 MHz min/max: 2003/2670 MHz Core speeds (MHz): 1: 2000 2: 2000
3: 2000 4: 2000
Graphics:
Device-1: Intel 4 Series Integrated Graphics vendor: Elite Systems
driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa
resolution: 1680x1050~60Hz
OpenGL: renderer: Mesa DRI Intel G45/G43 v: 2.1 Mesa 18.0.5
direct render: Yes
Audio:
Device-1: Intel 82801JI HD Audio vendor: Elite Systems
driver: snd_hda_intel v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.15.0-42-generic
Network:
Device-1: Intel 82567V-2 Gigabit Network vendor: Elite Systems
driver: e1000e v: 3.2.6-k port: d880 bus ID: 00:19.0
IF: enp0s25 state: down mac: <filter>
Device-2: Ralink RT2561/RT61 802.11g PCI driver: rt61pci v: 2.3.0
port: e800 bus ID: 03:01.0
IF: wlp3s1 state: up mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 15.58 GiB (3.3%)
ID-1: /dev/sda vendor: Western Digital model: WD5000AAKS-22V1A0
size: 465.76 GiB
RAID:
Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0
bus ID: 00:1f.2
Partition:
ID-1: / size: 452.90 GiB used: 7.72 GiB (1.7%) fs: ext4 dev: /dev/dm-1
ID-2: /boot size: 703.5 MiB used: 149.5 MiB (21.3%) fs: ext4
dev: /dev/sda1
ID-3: swap-1 size: 3.87 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-3
Sensors:
System Temperatures: cpu: 27.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 196 Uptime: 7m Memory: 3.73 GiB used: 1.10 GiB (29.5%)
Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19
inxi: 3.0.27

Approximately 50%-60% of the time I am able to resume from suspend. Suspend seems to mainly fail most always on the second suspend attempt on any given uptime.

I have about the same problem with the same kernel on an older p4 with Mint 19 Tara.

Is there an area I could/should be more focused on to try to resolve this issue?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Linux Mint 21.2 Victoria
Always =updatedb=
GNU/LINUX
User avatar
all41
Level 19
Level 19
Posts: 9498
Joined: Tue Dec 31, 2013 9:12 am
Location: Computer, Car, Cage

Re: Suspend fails 50% of time with Mint 19.1 Tessa

Post by all41 »

fwiw: yes I confirm suspend differs in 19.1 beta.
I'm sure this will be negated in the 19.1 release though--
hang loose
Everything in life was difficult before it became easy.
Locked

Return to “Beginner Questions”