Page 1 of 2
A burning question
Posted: Sun Jul 29, 2007 5:48 am
I've seen it recommended many times to burn the ISO image onto a CD at a speed of 2x. I burned mine at 4x, as this was the slowest I could burn it. Although the LiveCD will probably turn out fine, I'd prefer to lower the possibility of a screw-up as much as possible.
So to spare me the time involved in downloading and checking every bit of CD burning software I find . . .
What is a free, quality CD burning software that will allow me to burn at a speed of 2x?
Thanks much in advance.
Re: A burning question
Posted: Sun Jul 29, 2007 6:54 am
red-e-made wrote:What is a free, quality CD burning software that will allow me to burn at a speed of 2x?
Such things also depend on your cd drive. Some modern drives simply cannot and will not burn slower than 4x. As for CD burning software I'd recommend k3b
Posted: Sun Jul 29, 2007 8:31 am
k3b works only for Linux - which I haven't installed yet.
So let me clarify:
I'm looking for a free, quality, Windows compatible CD burning software that allows me to burn at 2x.
Posted: Sun Jul 29, 2007 10:33 am
red-e-made wrote: I'm looking for a free, quality, Windows compatible CD burning software that allows me to burn at 2x.
Ask Microsoft? Or use Google?
Posted: Mon Jul 30, 2007 12:06 pm
scorp123 wrote:Ask Microsoft? Or use Google?
Are you serious?
If I want to learn things about LinuxMint the hard way by Googling and seeing what people say in various and sundry websites and forums, I would have done that. Instead, I come to this forum, of LinuxMint users, to ask advice related to LinuxMint. Because it's easier.
"Use Google"? Dude, if you don't know, just don't even reply.
Posted: Mon Jul 30, 2007 12:52 pm
Why do you seek to burn absolutely at 2x? OK, one needs to burn with a low speed but 4x should be good. (If you always check the MD5)
I burn my ISO images at 4x and I never had problems.
Posted: Mon Jul 30, 2007 2:58 pm
red-e-made wrote: Are you serious?
I unfortunately don't know sh** about Microsoft crap OS's. The only burning software I know is Nero 6 ... but that one isn't free.
red-e-made wrote: If I want to learn things about LinuxMint
But you asked about a burning program for Windows ....
red-e-made wrote: "Use Google"? Dude, if you don't know, just don't even reply.
Dude, if you don't know how to use Google, why are you even on the Internet? It took me a few seconds to find free burning software. But after your stupid response I won't bother to post the URL's here. Have a nice day.
Posted: Mon Jul 30, 2007 10:04 pm
Just burn at 4x,
I did it and it turned out good
A little advice, try not to ask about Microshit programs on here, Our duly respected (god like) moderators all work full time and make this Distro and run this site in their spare time. The poor buggers don't have much time to answer questions on Mint !!
But they do a excellent job and always reply!!!!
Three cheers for the moderators
Posted: Mon Jul 30, 2007 11:23 pm
I always use this in windows.
Posted: Tue Jul 31, 2007 4:03 am
gollum1971 wrote:Three cheers for the moderators
Posted: Wed Aug 01, 2007 7:35 am
In answer to the 4x versus 2x question, I had seen the speed of 2x recommended over 4x by Husse among others. Now then:
scorp123 wrote:Dude, if you don't know how to use Google, why are you even on the Internet?
I'm aware of how to use Google. Asking a LinuxMint-related question - in this case, related to CD burning software for making a LiveCD - in the LinuxMint forum is just (usually) more effecient. Just as someone who had a question about his Camaro would go to a Camaro forum, someone who had a question about his Toshiba VCR would go to a Toshiba VCR forum, and so on and so forth.
scorp123 wrote:It took me a few seconds to find free burning software.
That's wonderful. I've seen a number of results as well. But as I said at the very beginning of the thread, I was trying to save the time of downloading one, checking it, finding it's slowest speed is 4x, uninstalling it, downloading another, etc.
In other words, I asked a specific question. If you don't have a specific answer, that's fine. But it's insulting to a person's intelligence to crack back with "try Google".
But after your stupid response I won't bother to post the URL's here. Have a nice day.
Come now. No need to get defensive for not knowing something. You're not expected to have all the answers. But if you're stumped, it'd be nice if you were at least polite about it.
Posted: Wed Aug 01, 2007 9:15 am
red-e-made wrote: Asking a LinuxMint-related question -
It was a Windows
-related question (free burning software for Windows). And I already wrote up there that I don't know anything and I don't want and I don't need to know anything about Microsoft-related software. If you get offended so easily (like it was intended as an offence in the first place??? I am better at offending people than *that*
) by "Ask Microsoft? Or use Google?" then I suggest you first take close look in the mirror and ask yourself if you maybe might have some other personal issues too?
red-e-made wrote: Just as someone who had a question about his Camaro would go to a Camaro forum,
To use your analogy: You just came to the Camarao forum to ask how to tow away your shiny new Camaro using an old rusty VW beetle from before World War 2 ....
What would folks in the Camaro forum answer? "Ahem, ask in a VW museum? Or ask an automobile club to assist you with that? .... " ==> same thing that I did.
red-e-made wrote: But it's insulting to a person's intelligence to crack back with "try Google".
If you get insulted so easily you probably shouldn't hang around on Internet forums? On the other hand, if you insist on hanging around on Internet forums, maybe it would be a good idea to adjust your tolerance levels a slight bit and not interpret every short and possibly stupid comment that someone makes to you as an "insult"? Just a hint
Posted: Wed Aug 01, 2007 10:57 am
I burned my iso at 32x and it works FINE! so why should 4x not work?
Posted: Wed Aug 01, 2007 2:46 pm
I generally only resort to 2x if there's a problem burning at a higher speed.
Did you try the disk you burned at 4x? If there's no problem with it, what's the problem?
Posted: Wed Aug 01, 2007 4:37 pm
In windows I also use imgburn and I always burn ISOs at max speed. I've never had a problem except with cd rws. good luck!
Posted: Fri Aug 03, 2007 5:14 am
Ironically, scorp, during this time I burned the ISO image at 4x onto a Sony CD and voila - nearly everything works (although I'm having a bit of trouble with wireless and wired connections, as I mentioned in Networks). The fact that almost everything works is largely due to advice you've given me in other areas, so thanks very much for that.
scorp123 wrote:maybe it would be a good idea to adjust your tolerance levels a slight bit and not interpret every short and possibly stupid comment that someone makes to you as an "insult"?
Telling someone to "use Google" in order to find something on the Internet is a little insulting, yes. But there was no steam shooting out of my ears, trust me. I was just offering a little friendly advice on your people skills. Sorry this led you to conclude I made a "stupid reply" as you put it earlier. Maybe I need to work on my people skills as well.
In any event, if you're not too insulted to deal with me further, I could really use your advice in this thread
. And I promise not to take it personally if you advise me to visit AskJeeves or something
Posted: Sun Aug 05, 2007 12:08 am
Has anybody tried Nero? Version 3 is out.
Free Windows burning software
Posted: Fri Aug 10, 2007 12:01 pm
A good burning software for Windows I've used before is CD Burner XP Pro.
You can find it at http://www.cdburnerxp.se/
Good luck and welcome to Mint!
Posted: Fri Aug 10, 2007 12:35 pm
I've heard different answers to burn speeds on other forums. Some say that the newer drives actually burn better at higher speeds. The slowest speed mine will burn at is 8x and I've never had a problem. I use K3b, thanks to Scorp's advice.
Posted: Mon Aug 13, 2007 6:57 pm
Doesn't NERO offer a trial (30 day) version of their Burner. I guess you could call that free.