ATI Radeon IGP 320M HELP!

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help
shaunuel
Level 1
Level 1
Posts: 1
Joined: Mon Dec 10, 2007 8:21 am

ATI Radeon IGP 320M HELP!

Postby shaunuel » Mon Dec 10, 2007 8:52 am

Hey folks,
I just installed Daryna on my old emachines M5313 laptop and everything is dandy.....save for one thing (Broadcom 53xx aside). I'm having a bastard of a time re: graphics drivers. I have an ATI Radeon IGP 320M (AKA: Mobility U1), however Envy doesn't recognize the card as ATI and fails to install the drivers accordingly. The manual install was a disaster as well (with 8.42.3 anyway).

I've been digging through forums (most of em' stale dated), and apparently there was little to no support for this chip. Can anyone shed some light into this? Any help would be greatly appreciated, thanks.

EDIT:
*-pci
description: Host bridge
product: AGP Bridge [IGP 320M]
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@0000:00:00.0
version: 13
width: 32 bits
clock: 66MHz
configuration: driver=agpgart-ati latency=64 module=ati_agp
*-pci
description: PCI bridge
product: PCI Bridge [IGP 320M]
vendor: ATI Technologies Inc
physical id: 1
bus info: pci@0000:00:01.0
version: 01
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
*-display
description: VGA compatible controller
product: Radeon Mobility U1
vendor: ATI Technologies Inc
physical id: 5
bus info: pci@0000:01:05.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: agp agp-2.0 pm vga bus_master cap_list
configuration: latency=66 mingnt=8

Husse
Level 23
Level 23
Posts: 19595
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: ATI Radeon IGP 320M HELP!

Postby Husse » Fri Dec 14, 2007 8:33 am

Have you tried the 7.11 version directly from AMD?
A bit more hands on than Envy or "Restricted drivers" but nothing you should not be able to handle I think
Image
Don't fix it if it ain't broken, don't break it if you can't fix it


Return to “Newbie Questions”

Who is online

Users browsing this forum: Derek_S and 5 guests