I have an Aspire laptop, with ATI Radeon HD 4200, and the resolution on the laptop screen is fine (could be bigger tho) but when I connect with a cable to my other monitor I only get to choose 1024x768. Everything looks big and messy, how can I increase the resolution?
EDIT: I have Linux Mint Mate x64
Thanks.
How to increase resolution on projector (two monitors)
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
-
03927e9c
How to increase resolution on projector (two monitors)
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
-
LinuxJim
Re: How to increase resolution on projector (two monitors)
What is the make and model of the monitor/projector?03927e9c wrote: when I connect with a cable to my other monitor I only get to choose 1024x768. Everything looks big and messy, how can I increase the resolution?
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Thanks for replying. It's a Samsung 732 N Plus
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Anybody???? Please help I've tried everything and it didn't work, thats why I'm posting.
-
LinuxJim
Re: How to increase resolution on projector (two monitors)
Hmm... that monitor has a native resolution of 1280x1024 through a VGA interface. It *should* allow you to select 1280x1024.
Some VGA cables do not pass the signals necessary to get the monitor ID (and many older monitors don't provide one). Have you tried a different VGA cable?
I'm a bit confused - the title of your post mentions a projector - where does the projector fit into your query?
Some VGA cables do not pass the signals necessary to get the monitor ID (and many older monitors don't provide one). Have you tried a different VGA cable?
I'm a bit confused - the title of your post mentions a projector - where does the projector fit into your query?
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Well it works as projector, my bad, it's just a monitor, and yes I've tried with differente cables. And different computers. I have desktop PC with LM and the resolutions its fine (1280x1024)
-
LinuxJim
Re: How to increase resolution on projector (two monitors)
Then all I can suggest is to look in your laptop's manual and find out what the max resolution is for the external VGA port. It may be limited to 1024x768, so that's all you get. Shouldn't be that low if the laptop is less than 5 years old, but I've seen such limitations on older machines.
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Thaks for the response. No it's not because while back I had Windows on that laptop and the resolution was bigger than 1024x768.
What about xong.conf??? I tried it but I guess I'm not that pro to do it.
What about xong.conf??? I tried it but I guess I'm not that pro to do it.
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Please help me!!!! What about this??? How can I make to work on my personal configuration....?? I don't know what to edit into that files
http://forum.linuxmint.com/viewtopic.php?f=59&t=214817
http://forum.linuxmint.com/viewtopic.php?f=49&t=138899
http://forum.linuxmint.com/viewtopic.php?f=59&t=214817
http://forum.linuxmint.com/viewtopic.php?f=49&t=138899
Re: How to increase resolution on projector (two monitors)
You need to post some additional information. Use these commands in the Terminal:
3. Use this command to open the “Xorg.0.log” file, or open the Log File Viewer:
Press Ctrl+A to select the entire file contents. Right click on the screen and select “Copy”. Don't save it to a file. Open the Mint Forum reply window and select “Code” in the menu. Paste the copied lines between the two code words.
If you have problems posting that long file, then upload it to pastebin.com by using this command:
Post the URL link that displays in the Terminal window.
Code: Select all
1. inxi -Fx
2. xrandr 3. Use this command to open the “Xorg.0.log” file, or open the Log File Viewer:
Code: Select all
pluma /var/log/Xorg.0.logIf you have problems posting that long file, then upload it to pastebin.com by using this command:
Code: Select all
pastebin /var/log/Xorg.0.log-
03927e9c
Re: How to increase resolution on projector (two monitors)
inxi -Fx
xandr
Xorg.0.log
Code: Select all
System: Host: mint Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: MATE 1.12.0 (Gtk 3.10.8~8+qiana)
Distro: Linux Mint 17.3 Rosa
Machine: System: Acer product: Aspire 5542 v: 0100
Mobo: Acer model: JV50TR v: Rev
Bios: Phoenix v: V1.09 date: 01/18/2010
CPU: Dual core AMD Athlon II M300 (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 7979
clock speeds: max: 2000 MHz 1: 1400 MHz 2: 1400 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250]
bus-ID: 01:05.0
Display Server: X.Org 1.17.1 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz, 1366x768@59.6hz
GLX Renderer: Gallium 0.4 on AMD RS880
GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series]
driver: snd_hda_intel bus-ID: 01:05.1
Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
driver: snd_hda_intel bus-ID: 00:14.2
Sound: Advanced Linux Sound Architecture v: k3.19.0-32-generic
Network: Card-1: Broadcom NetLink BCM5784M Gigabit Ethernet PCIe
driver: tg3 v: 3.137 bus-ID: 03:00.0
IF: eth0 state: up speed: 1000 Mbps duplex: full
mac: 00:26:2d:8d:dc:64
Card-2: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express)
driver: ath9k bus-ID: 09:00.0
IF: wlan0 state: down mac: 00:17:c4:e6:b6:6c
Drives: HDD Total Size: NA (-)
ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB temp: 47C
ID-2: USB /dev/sdb model: DataTraveler_C10 size: 2.0GB temp: 0C
Partition: ID-1: / size: 1.4G used: 78M (6%) fs: overlay dev: N/A
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 75.1C mobo: 65.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 160 Uptime: 2 min Memory: 542.8/2755.9MB
Init: Upstart runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111) inxi: 2.2.28Code: Select all
Screen 0: minimum 320 x 200, current 2390 x 768, maximum 8192 x 8192
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*
800x600 60.3 56.2
848x480 60.0
640x480 59.9
LVDS connected primary 1366x768+1024+0 (normal left inverted right x axis y axis) 344mm x 193mm
1366x768 59.6*+
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
HDMI-0 disconnected (normal left inverted right x axis y axis)
mint@mint ~ $
Code: Select all
[ 23.368]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 23.368] X Protocol Version 11, Revision 0
[ 23.368] Build Operating System: Linux 3.19.0-28-generic x86_64 Ubuntu
[ 23.368] Current Operating System: Linux mint 3.19.0-32-generic #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 x86_64
[ 23.368] Kernel command line: file=/cdrom/preseed/linuxmint.seed boot=casper initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
[ 23.368] Build Date: 11 September 2015 10:33:14AM
[ 23.368] xorg-server 2:1.17.1-0ubuntu3.1~trusty1 (For technical support please see http://www.ubuntu.com/support)
[ 23.368] Current version of pixman: 0.30.2
[ 23.368] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.368] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.368] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 5 18:05:30 2016
[ 23.373] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.398] (==) No Layout section. Using the first Screen section.
[ 23.398] (==) No screen section available. Using defaults.
[ 23.398] (**) |-->Screen "Default Screen Section" (0)
[ 23.398] (**) | |-->Monitor "<default monitor>"
[ 23.398] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.398] (==) Automatically adding devices
[ 23.398] (==) Automatically enabling devices
[ 23.398] (==) Automatically adding GPU devices
[ 23.406] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.406] Entry deleted from font path.
[ 23.406] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.406] Entry deleted from font path.
[ 23.406] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.406] Entry deleted from font path.
[ 23.410] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.410] Entry deleted from font path.
[ 23.410] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.410] Entry deleted from font path.
[ 23.411] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 23.411] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 23.411] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.411] (II) Loader magic: 0x7fb8d64a1c60
[ 23.411] (II) Module ABI versions:
[ 23.411] X.Org ANSI C Emulation: 0.4
[ 23.411] X.Org Video Driver: 19.0
[ 23.411] X.Org XInput driver : 21.0
[ 23.411] X.Org Server Extension : 9.0
[ 23.411] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.413] (--) PCI:*(0:1:5:0) 1002:9712:1025:0293 rev 0, Mem @ 0xd0000000/268435456, 0xcfdf0000/65536, 0xcfe00000/1048576, I/O @ 0x00009000/256
[ 23.413] (II) LoadModule: "glx"
[ 23.415] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.557] (II) Module glx: vendor="X.Org Foundation"
[ 23.557] compiled for 1.17.1, module version = 1.0.0
[ 23.557] ABI class: X.Org Server Extension, version 9.0
[ 23.557] (==) AIGLX enabled
[ 23.557] (==) Matched fglrx as autoconfigured driver 0
[ 23.557] (==) Matched ati as autoconfigured driver 1
[ 23.557] (==) Matched fglrx as autoconfigured driver 2
[ 23.557] (==) Matched ati as autoconfigured driver 3
[ 23.557] (==) Matched modesetting as autoconfigured driver 4
[ 23.557] (==) Matched fbdev as autoconfigured driver 5
[ 23.557] (==) Matched vesa as autoconfigured driver 6
[ 23.557] (==) Assigned the driver to the xf86ConfigLayout
[ 23.557] (II) LoadModule: "fglrx"
[ 23.558] (WW) Warning, couldn't open module fglrx
[ 23.558] (II) UnloadModule: "fglrx"
[ 23.558] (II) Unloading fglrx
[ 23.558] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 23.558] (II) LoadModule: "ati"
[ 23.558] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 23.575] (II) Module ati: vendor="X.Org Foundation"
[ 23.575] compiled for 1.17.1, module version = 7.5.0
[ 23.575] Module class: X.Org Video Driver
[ 23.575] ABI class: X.Org Video Driver, version 19.0
[ 23.575] (II) LoadModule: "radeon"
[ 23.575] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 23.616] (II) Module radeon: vendor="X.Org Foundation"
[ 23.616] compiled for 1.17.1, module version = 7.5.0
[ 23.616] Module class: X.Org Video Driver
[ 23.616] ABI class: X.Org Video Driver, version 19.0
[ 23.616] (II) LoadModule: "modesetting"
[ 23.617] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.634] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.634] compiled for 1.17.1, module version = 1.17.1
[ 23.634] Module class: X.Org Video Driver
[ 23.634] ABI class: X.Org Video Driver, version 19.0
[ 23.634] (II) LoadModule: "fbdev"
[ 23.634] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.635] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.635] compiled for 1.17.1, module version = 0.4.4
[ 23.635] Module class: X.Org Video Driver
[ 23.635] ABI class: X.Org Video Driver, version 19.0
[ 23.635] (II) LoadModule: "vesa"
[ 23.635] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.641] (II) Module vesa: vendor="X.Org Foundation"
[ 23.641] compiled for 1.17.1, module version = 2.3.3
[ 23.641] Module class: X.Org Video Driver
[ 23.641] ABI class: X.Org Video Driver, version 19.0
[ 23.641] (==) Matched fglrx as autoconfigured driver 0
[ 23.641] (==) Matched ati as autoconfigured driver 1
[ 23.641] (==) Matched fglrx as autoconfigured driver 2
[ 23.641] (==) Matched ati as autoconfigured driver 3
[ 23.641] (==) Matched modesetting as autoconfigured driver 4
[ 23.641] (==) Matched fbdev as autoconfigured driver 5
[ 23.641] (==) Matched vesa as autoconfigured driver 6
[ 23.641] (==) Assigned the driver to the xf86ConfigLayout
[ 23.641] (II) LoadModule: "fglrx"
[ 23.641] (WW) Warning, couldn't open module fglrx
[ 23.641] (II) UnloadModule: "fglrx"
[ 23.641] (II) Unloading fglrx
[ 23.641] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 23.641] (II) LoadModule: "ati"
[ 23.641] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 23.641] (II) Module ati: vendor="X.Org Foundation"
[ 23.641] compiled for 1.17.1, module version = 7.5.0
[ 23.641] Module class: X.Org Video Driver
[ 23.641] ABI class: X.Org Video Driver, version 19.0
[ 23.641] (II) LoadModule: "modesetting"
[ 23.642] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.642] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.642] compiled for 1.17.1, module version = 1.17.1
[ 23.642] Module class: X.Org Video Driver
[ 23.642] ABI class: X.Org Video Driver, version 19.0
[ 23.642] (II) UnloadModule: "modesetting"
[ 23.642] (II) Unloading modesetting
[ 23.642] (II) Failed to load module "modesetting" (already loaded, 0)
[ 23.642] (II) LoadModule: "fbdev"
[ 23.642] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.642] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.642] compiled for 1.17.1, module version = 0.4.4
[ 23.642] Module class: X.Org Video Driver
[ 23.642] ABI class: X.Org Video Driver, version 19.0
[ 23.642] (II) UnloadModule: "fbdev"
[ 23.642] (II) Unloading fbdev
[ 23.642] (II) Failed to load module "fbdev" (already loaded, 0)
[ 23.642] (II) LoadModule: "vesa"
[ 23.642] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.642] (II) Module vesa: vendor="X.Org Foundation"
[ 23.642] compiled for 1.17.1, module version = 2.3.3
[ 23.642] Module class: X.Org Video Driver
[ 23.642] ABI class: X.Org Video Driver, version 19.0
[ 23.642] (II) UnloadModule: "vesa"
[ 23.642] (II) Unloading vesa
[ 23.642] (II) Failed to load module "vesa" (already loaded, 0)
[ 23.642] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 23.645] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23.645] (II) FBDEV: driver for framebuffer: fbdev
[ 23.645] (II) VESA: driver for VESA chipsets: vesa
[ 23.645] (++) using VT number 8
[ 23.655] (II) [KMS] Kernel modesetting enabled.
[ 23.655] (WW) Falling back to old probe method for modesetting
[ 23.655] (WW) Falling back to old probe method for fbdev
[ 23.655] (II) Loading sub module "fbdevhw"
[ 23.655] (II) LoadModule: "fbdevhw"
[ 23.655] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.670] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.670] compiled for 1.17.1, module version = 0.0.2
[ 23.670] ABI class: X.Org Video Driver, version 19.0
[ 23.670] (WW) Falling back to old probe method for vesa
[ 23.670] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.670] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 23.670] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.670] (==) RADEON(0): Default visual is TrueColor
[ 23.670] (==) RADEON(0): RGB weight 888
[ 23.670] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 23.670] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712)
[ 23.671] (II) Loading sub module "dri2"
[ 23.671] (II) LoadModule: "dri2"
[ 23.671] (II) Module "dri2" already built-in
[ 23.671] (II) Loading sub module "exa"
[ 23.671] (II) LoadModule: "exa"
[ 23.671] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 23.672] (II) Module exa: vendor="X.Org Foundation"
[ 23.672] compiled for 1.17.1, module version = 2.6.0
[ 23.672] ABI class: X.Org Video Driver, version 19.0
[ 23.672] (II) RADEON(0): KMS Color Tiling: enabled
[ 23.672] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 23.672] (II) RADEON(0): KMS Pageflipping: enabled
[ 23.672] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 23.721] (II) RADEON(0): Output VGA-0 has no monitor section
[ 23.721] (II) RADEON(0): Output LVDS has no monitor section
[ 23.723] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 23.764] (II) RADEON(0): EDID for output VGA-0
[ 23.764] (II) RADEON(0): Printing probed modes for output VGA-0
[ 23.764] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.764] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.764] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.764] (II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 23.764] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 23.764] (II) RADEON(0): EDID for output LVDS
[ 23.764] (II) RADEON(0): Manufacturer: AUO Model: 20ec Serial#: 0
[ 23.764] (II) RADEON(0): Year: 2008 Week: 1
[ 23.764] (II) RADEON(0): EDID Version: 1.3
[ 23.764] (II) RADEON(0): Digital Display Input
[ 23.764] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 23.764] (II) RADEON(0): Gamma: 2.20
[ 23.764] (II) RADEON(0): No DPMS capabilities specified
[ 23.764] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.764] (II) RADEON(0): First detailed timing is preferred mode
[ 23.764] (II) RADEON(0): redX: 0.610 redY: 0.353 greenX: 0.329 greenY: 0.616
[ 23.764] (II) RADEON(0): blueX: 0.149 blueY: 0.103 whiteX: 0.313 whiteY: 0.329
[ 23.764] (II) RADEON(0): Manufacturer's mask: 0
[ 23.764] (II) RADEON(0): Supported detailed timing:
[ 23.764] (II) RADEON(0): clock: 69.5 MHz Image Size: 344 x 193 mm
[ 23.764] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1437 h_border: 0
[ 23.764] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 23.764] (II) RADEON(0): Unknown vendor-specific block f
[ 23.764] (II) RADEON(0): AUO
[ 23.764] (II) RADEON(0): B156XW02 V0
[ 23.764] (II) RADEON(0): EDID (in hex):
[ 23.764] (II) RADEON(0): 00ffffffffffff0006afec2000000000
[ 23.764] (II) RADEON(0): 01120103802213780a57559c5a549d26
[ 23.764] (II) RADEON(0): 1a505400000001010101010101010101
[ 23.764] (II) RADEON(0): 010101010101261b5647500026303020
[ 23.764] (II) RADEON(0): 340058c1100000180000000f00000000
[ 23.764] (II) RADEON(0): 00000000000000000020000000fe0041
[ 23.764] (II) RADEON(0): 554f0a202020202020202020000000fe
[ 23.764] (II) RADEON(0): 004231353658573032205630200a002e
[ 23.764] (II) RADEON(0): Printing probed modes for output LVDS
[ 23.764] (II) RADEON(0): Modeline "1366x768"x59.6 69.50 1366 1414 1446 1447 768 771 775 806 -hsync -vsync (48.0 kHz eP)
[ 23.764] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 23.764] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 23.764] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 23.764] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 23.765] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 23.765] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 23.765] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 23.767] (II) RADEON(0): EDID for output HDMI-0
[ 23.767] (II) RADEON(0): Output VGA-0 connected
[ 23.767] (II) RADEON(0): Output LVDS connected
[ 23.767] (II) RADEON(0): Output HDMI-0 disconnected
[ 23.767] (II) RADEON(0): Using fuzzy aspect match for initial modes
[ 23.767] (II) RADEON(0): Output VGA-0 using initial mode 1024x768
[ 23.767] (II) RADEON(0): Output LVDS using initial mode 1024x768
[ 23.767] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.767] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:10000000 visible:f887000
[ 23.767] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 23.767] (==) RADEON(0): DPI set to (96, 96)
[ 23.767] (II) Loading sub module "fb"
[ 23.767] (II) LoadModule: "fb"
[ 23.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.770] (II) Module fb: vendor="X.Org Foundation"
[ 23.770] compiled for 1.17.1, module version = 1.0.0
[ 23.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.770] (II) Loading sub module "ramdac"
[ 23.770] (II) LoadModule: "ramdac"
[ 23.770] (II) Module "ramdac" already built-in
[ 23.770] (II) UnloadModule: "modesetting"
[ 23.770] (II) Unloading modesetting
[ 23.770] (II) UnloadModule: "fbdev"
[ 23.770] (II) Unloading fbdev
[ 23.770] (II) UnloadSubModule: "fbdevhw"
[ 23.770] (II) Unloading fbdevhw
[ 23.770] (II) UnloadModule: "vesa"
[ 23.770] (II) Unloading vesa
[ 23.770] (--) Depth 24 pixmap format is 32 bpp
[ 23.770] (II) RADEON(0): [DRI2] Setup complete
[ 23.770] (II) RADEON(0): [DRI2] DRI driver: r600
[ 23.770] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 23.772] (II) RADEON(0): Front buffer size: 3072K
[ 23.772] (II) RADEON(0): VRAM usage limit set to 226249K
[ 23.789] (==) RADEON(0): Backing store enabled
[ 23.789] (II) RADEON(0): Direct rendering enabled
[ 23.789] (II) EXA(0): Driver allocated offscreen pixmaps
[ 23.789] (II) EXA(0): Driver registered support for the following operations:
[ 23.789] (II) Solid
[ 23.789] (II) Copy
[ 23.789] (II) Composite (RENDER acceleration)
[ 23.789] (II) UploadToScreen
[ 23.789] (II) DownloadFromScreen
[ 23.789] (II) RADEON(0): Acceleration enabled
[ 23.789] (==) RADEON(0): DPMS enabled
[ 23.789] (==) RADEON(0): Silken mouse enabled
[ 23.789] (II) RADEON(0): Set up textured video
[ 23.789] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 23.789] (II) RADEON(0): [XvMC] Extension initialized.
[ 23.789] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.790] (--) RandR disabled
[ 24.910] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24.910] (II) AIGLX: enabled GLX_ARB_create_context
[ 24.910] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 24.910] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 24.910] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24.910] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24.910] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 24.910] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 24.910] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24.911] (II) AIGLX: Loaded and initialized r600
[ 24.911] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.896] (II) RADEON(0): Setting screen physical size to 270 x 203
[ 26.026] (II) XKB: generating xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 26.205] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 26.205] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.205] (II) LoadModule: "evdev"
[ 26.205] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.217] (II) Module evdev: vendor="X.Org Foundation"
[ 26.217] compiled for 1.17.1, module version = 2.9.0
[ 26.217] Module class: X.Org XInput Driver
[ 26.217] ABI class: X.Org XInput driver, version 21.0
[ 26.217] (II) Using input driver 'evdev' for 'Power Button'
[ 26.217] (**) Power Button: always reports core events
[ 26.217] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 26.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.217] (--) evdev: Power Button: Found keys
[ 26.217] (II) evdev: Power Button: Configuring as keyboard
[ 26.217] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 26.217] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.217] (**) Option "xkb_rules" "evdev"
[ 26.217] (**) Option "xkb_model" "pc105"
[ 26.217] (**) Option "xkb_layout" "us"
[ 26.218] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 26.218] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.218] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.218] (**) Video Bus: always reports core events
[ 26.218] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 26.218] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.218] (--) evdev: Video Bus: Found keys
[ 26.218] (II) evdev: Video Bus: Configuring as keyboard
[ 26.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:01/input/input9/event5"
[ 26.218] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.218] (**) Option "xkb_rules" "evdev"
[ 26.218] (**) Option "xkb_model" "pc105"
[ 26.218] (**) Option "xkb_layout" "us"
[ 26.219] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 26.219] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.219] (II) Using input driver 'evdev' for 'Power Button'
[ 26.219] (**) Power Button: always reports core events
[ 26.219] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 26.219] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.219] (--) evdev: Power Button: Found keys
[ 26.219] (II) evdev: Power Button: Configuring as keyboard
[ 26.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 26.219] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 26.219] (**) Option "xkb_rules" "evdev"
[ 26.219] (**) Option "xkb_model" "pc105"
[ 26.219] (**) Option "xkb_layout" "us"
[ 26.220] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 26.220] (II) No input driver specified, ignoring this device.
[ 26.220] (II) This device may have been added with another device file.
[ 26.221] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 26.221] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.221] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.221] (**) Sleep Button: always reports core events
[ 26.221] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 26.221] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.221] (--) evdev: Sleep Button: Found keys
[ 26.221] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.221] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 26.221] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.221] (**) Option "xkb_rules" "evdev"
[ 26.221] (**) Option "xkb_model" "pc105"
[ 26.221] (**) Option "xkb_layout" "us"
[ 26.222] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 26.222] (II) No input driver specified, ignoring this device.
[ 26.222] (II) This device may have been added with another device file.
[ 26.222] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event6)
[ 26.222] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 26.222] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 26.222] (**) Genius Optical Mouse: always reports core events
[ 26.222] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event6"
[ 26.276] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 26.276] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 26.276] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 26.276] (--) evdev: Genius Optical Mouse: Found relative axes
[ 26.276] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 26.276] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 26.276] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 26.276] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 26.276] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:0458:003A.0001/input/input11/event6"
[ 26.276] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 10)
[ 26.276] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 26.276] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 26.276] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 26.276] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 26.276] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 26.277] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 26.277] (II) No input driver specified, ignoring this device.
[ 26.277] (II) This device may have been added with another device file.
[ 26.277] (II) config/udev: Adding input device Video WebCam (/dev/input/event9)
[ 26.277] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 26.277] (II) Using input driver 'evdev' for 'Video WebCam'
[ 26.277] (**) Video WebCam: always reports core events
[ 26.277] (**) evdev: Video WebCam: Device: "/dev/input/event9"
[ 26.277] (--) evdev: Video WebCam: Vendor 0x4f2 Product 0xb044
[ 26.277] (--) evdev: Video WebCam: Found keys
[ 26.277] (II) evdev: Video WebCam: Configuring as keyboard
[ 26.277] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input16/event9"
[ 26.277] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD, id 11)
[ 26.277] (**) Option "xkb_rules" "evdev"
[ 26.277] (**) Option "xkb_model" "pc105"
[ 26.277] (**) Option "xkb_layout" "us"
[ 26.278] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event11)
[ 26.278] (II) No input driver specified, ignoring this device.
[ 26.278] (II) This device may have been added with another device file.
[ 26.278] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event12)
[ 26.278] (II) No input driver specified, ignoring this device.
[ 26.278] (II) This device may have been added with another device file.
[ 26.278] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event13)
[ 26.278] (II) No input driver specified, ignoring this device.
[ 26.278] (II) This device may have been added with another device file.
[ 26.279] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 26.279] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.279] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.279] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.279] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 26.279] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.279] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.279] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.279] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 26.279] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 26.279] (**) Option "xkb_rules" "evdev"
[ 26.279] (**) Option "xkb_model" "pc105"
[ 26.279] (**) Option "xkb_layout" "us"
[ 26.279] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
[ 26.279] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 26.279] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 26.279] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 26.279] (II) LoadModule: "synaptics"
[ 26.280] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.282] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.282] compiled for 1.17.1, module version = 1.8.99
[ 26.282] Module class: X.Org XInput Driver
[ 26.282] ABI class: X.Org XInput driver, version 21.0
[ 26.283] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 26.283] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 26.283] (**) Option "Device" "/dev/input/event8"
[ 26.304] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000 (res 0)
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400 (res 0)
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 26.304] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 26.304] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 26.304] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 26.320] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event8"
[ 26.320] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[ 26.320] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 26.320] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 26.320] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.082
[ 26.321] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 26.321] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 26.321] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 26.321] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 26.321] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 26.322] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 26.322] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.323] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event7)
[ 26.323] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 26.323] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 26.323] (**) ALPS PS/2 Device: always reports core events
[ 26.323] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event7"
[ 26.323] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 26.323] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 26.323] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 26.323] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 26.323] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 26.323] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 26.323] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.323] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input13/event7"
[ 26.323] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 14)
[ 26.323] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 26.324] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 26.324] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 26.324] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 26.324] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 26.324] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse1)
[ 26.324] (II) No input driver specified, ignoring this device.
[ 26.324] (II) This device may have been added with another device file.
[ 26.327] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event14)
[ 26.327] (II) No input driver specified, ignoring this device.
[ 26.327] (II) This device may have been added with another device file.
[ 26.327] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 26.327] (II) No input driver specified, ignoring this device.
[ 26.327] (II) This device may have been added with another device file.
[ 32.284] (II) XKB: generating xkmfile /var/lib/xkb/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 56.022] (II) RADEON(0): Allocate new frame buffer 2390x768 stride 2400
[ 56.022] (II) RADEON(0): VRAM usage limit set to 222534KRe: How to increase resolution on projector (two monitors)
Use this command in the Terminal to create an xorg.conf file:
In the empty opened file, add these lines:
Log out and back in.
If there is a startup problem and you can't get to the desktop, then reboot and select Recovery Mode at the GRUB boot menu. If no menu shows, then hold down the Shift key while starting, or keep tapping the key. In the menu, select “root - drop to root shell prompt”. When asked for the root password, just type your user password. Then change the file permissions to read and write by typing:
Then remove the xorg.conf file by typing this command:
Then type this command and wait: reboot
Code: Select all
gksudo pluma /etc/X11/xorg.confCode: Select all
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "PreferredMode" "1366x768"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "LeftOf" "Monitor0"
Option "Primary" "true"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Modeline "1280x1024_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
Option "PreferredMode" "1280x1024"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "Monitor-LVDS" "Monitor0"
Option "Monitor-VGA-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSectionIf there is a startup problem and you can't get to the desktop, then reboot and select Recovery Mode at the GRUB boot menu. If no menu shows, then hold down the Shift key while starting, or keep tapping the key. In the menu, select “root - drop to root shell prompt”. When asked for the root password, just type your user password. Then change the file permissions to read and write by typing:
Code: Select all
mount -o remount,rw / Then remove the xorg.conf file by typing this command:
Code: Select all
rm /etc/X11/xorg.conf-
03927e9c
Re: How to increase resolution on projector (two monitors)
Thanks for your help. I didn't have a problem after saving the file an rebooting, but everything is the same (the second monitor won't display a bigger resolution).... what coud be the problem?
Re: How to increase resolution on projector (two monitors)
I made an error. The section of the modeline in the second Monitor section after "1280x1024_60.00" was for a 1024x768 resolution. Open the xorg.conf file, remove all the lines and then add these lines. There's one other change I made:
Log out and back in. If that doesn't work, post another Xorg.0.log file, and then change the modeline in the second Monitor section to this:
Code: Select all
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "PreferredMode" "1366x768"
Option "Primary" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "LeftOf" "Monitor0"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Modeline "1280x1024_60.00" 90.75 1280 1328 1360 1440 1024 1027 1034 1054 +hsync -vsync
Option "PreferredMode" "1280x1024"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "Monitor-LVDS" "Monitor0"
Option "Monitor-VGA-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSectionCode: Select all
Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync-
03927e9c
Re: How to increase resolution on projector (two monitors)
Thank you very much, that worked! I had to edit the file with the second modeline code you posted. Now if I wanted to increase the resolution even more? I just type the resolution numbers into the file? Or is that the biggest resolution for my monitor?
Re: How to increase resolution on projector (two monitors)
The first modeline was generated by using the cvt utility with reduced blanking, which is better for digital displays:03927e9c wrote:I had to edit the file with the second modeline code you posted.
Code: Select all
cvt -r 1280 1024
Modeline "1280x1024R" 90.75 1280 1328 1360 1440 1024 1027 1034 1054 +hsync -vsyncCode: Select all
cvt 1280 1024
Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsyncThe maximum resolution supported by your monitor is 1280x1024 at 75 Hz. The Samsung User Manual for a Samsung 732 N Plus monitor can be obtained at this website: http://www.samsung.com/my/support/model/LS17PEASF/XME03927e9c wrote: Now if I wanted to increase the resolution even more? I just type the resolution numbers into the file? Or is that the biggest resolution for my monitor?
Page 65 is shown below and lists the specifications:
Last edited by roblm on Sat Feb 06, 2016 7:54 pm, edited 1 time in total.
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Hey there sorry to post again, but I've come with a problem with the monitor. After all worked out great I've noticed that when the monitor is on it makes a beep sound, something like a signal, and it's constant and very ear piercing, even with the speakers on. When I turn it off, it stops...
What could it be? I think is something on that xorg file, because with the previous computer it didn't make no beep sound (wasn't necessary no xorg file to increase resolution)
What could it be? I think is something on that xorg file, because with the previous computer it didn't make no beep sound (wasn't necessary no xorg file to increase resolution)
Re: How to increase resolution on projector (two monitors)
I haven't seen anything like this happen in any previous topic I've worked in. First try pressing the monitor's “Auto” button.
Then use this command to rename the xorg.conf file to see if the sound disappears:
To enable the file again:
This info is from the user manual for a 1280x1024 resolution:
These are the values being used from the created modeline:
There's a difference in one of the Sync Polarity values (horizontal/vertical) but I don't know how much significance this has.
Is your system a dual-boot with Windows, or do you have another Windows computer to connect the monitor to? Then the monitor's EDID can be retrieved from it if there's no similar sound.
Then use this command to rename the xorg.conf file to see if the sound disappears:
Code: Select all
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.oldCode: Select all
sudo mv /etc/X11/xorg.conf.old /etc/X11/xorg.confCode: Select all
1280 x 1024 63.981 60.020 108.000 +/+Code: Select all
1280 x 1024 63.67 60.00" 109.00 -/+Is your system a dual-boot with Windows, or do you have another Windows computer to connect the monitor to? Then the monitor's EDID can be retrieved from it if there's no similar sound.
-
03927e9c
Re: How to increase resolution on projector (two monitors)
Well, I know what the problem is: the monitor it self. Just Linux here, no double connections. Grabbed the monitor with two different cables (VGA and power) and connected it to a different laptop with just Windows and the beep is still there. The noise only disappears when the monitor is off or it has no signal.
So it seems the problem is the monitor itself, might be because is old and has a lot of usage. The reason I didn't hear it before must be because I had a PC and the coolers covered the beep noise.
I'm guessing there's no solution but to buy a new one, god damn it.
So it seems the problem is the monitor itself, might be because is old and has a lot of usage. The reason I didn't hear it before must be because I had a PC and the coolers covered the beep noise.
I'm guessing there's no solution but to buy a new one, god damn it.