HDMI + Sound + Mint 18
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Re: HDMI + Sound + Mint 18
Yes. I have this exact problem too.
Fix please.
Fix please.
Re: HDMI + Sound + Mint 18
Same problem for me as well.
Seems to switch output from HDMI to internal speaker as soon as there is a longer break, once even after starting and closing virtualbox.
17.3 did remember last used output, so must be something within 18.
Please Fix
Seems to switch output from HDMI to internal speaker as soon as there is a longer break, once even after starting and closing virtualbox.
17.3 did remember last used output, so must be something within 18.
Please Fix
Re: HDMI + Sound + Mint 18
I have a similar problem with mint 18, I can hear sounds from headphones and analog out but not from HDMI, HDMI output it's not even shown anywhere, neither in audio setting nor in alsa nor in pavu
if I launch
cat /proc/asound/cards
the result is
0 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xfbbf0000 irq 28
if I launch
cat /proc/asound/cards
the result is
0 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xfbbf0000 irq 28
Re: HDMI + Sound + Mint 18
hmm i followed rene's advices yesterday, nothing happened after reboot
and today sound preferences behave , even after boots
I hope my problem is gone
and today sound preferences behave , even after boots
I hope my problem is gone
Re: HDMI + Sound + Mint 18
Wonderful, and thanks for reporting, but do you know which one helped specifically? Thejanhostdk wrote:Ty rene <3 that did it for me
one orCode: Select all
pulseaudio -k && rm -r ~/.config/pulse
orCode: Select all
echo -e 'defaults.ctl.!card HDMI\ndefaults.pcm.!card HDMI' >~/.asoundrc
If the last one, then it seems we're looking at a dumb Pulseaudio bug (if the second, then a perhaps not completely dumb Pulseaudio bug, and if the first perhaps even a not really all that dumb Pulseaudio bug).Code: Select all
sudo sh -c "echo options snd-hda-intel index=1,0 >/etc/modprobe.d/snd-hda-intel.conf"
Re: HDMI + Sound + Mint 18
nope it did'nt work after several reboots and logins on the day
but the next day it just worked
but the next day it just worked
Re: HDMI + Sound + Mint 18
Well, let us consider the above a potentially useful summary then. None of the described attempted solutions seem to have the potential to not work after a reboot yet work after (supposedly) a full shutdown, meaning something else (an upgrade?) may have rather fixed things -- but oh well, maybe still useful.
Re: HDMI + Sound + Mint 18
I had the problem for some time,i whas just going preferences and change to hdmi every time i startet my pc
Until i got so annoyed that i startet using my lm 17.3...hdd backup
I tried both login out, restart and shutdown after i had tried the commands in terminal
Listened to musik rest of the day and searching for various help on forum
Shutdown
woke up and checked my mail before rushing to work, tried as first to start winamp and play a number
and the sound came in my face at much too loud at 0500 am
checked the preferences, mm hdmi , no updating, upgrading or other serious inbetween
strange but true
Until i got so annoyed that i startet using my lm 17.3...hdd backup
I tried both login out, restart and shutdown after i had tried the commands in terminal
Listened to musik rest of the day and searching for various help on forum
Shutdown
woke up and checked my mail before rushing to work, tried as first to start winamp and play a number
and the sound came in my face at much too loud at 0500 am
checked the preferences, mm hdmi , no updating, upgrading or other serious inbetween
strange but true
-
- Level 1
- Posts: 3
- Joined: Thu Sep 10, 2015 7:34 am
Re: HDMI + Sound + Mint 18
I have now installed chrome beta for the pulsaudio . Alsa problem, for now its works fine with streaming...
Re: HDMI + Sound + Mint 18
Tried a new install of mint 18 from usb stick to new hdd, same problems
Re: HDMI + Sound + Mint 18
Hi, my default sound output is set to headphones built-in audio..
can anyone please help me revert back to analog speakers..
thank you
can anyone please help me revert back to analog speakers..
thank you
Re: HDMI + Sound + Mint 18
This started happening to me since I updgraded. 17 was fine. The audio keeps switching to the HDMI audio output source and I have to use "sudo pavucontrol" to revert the audio. This is really annoying!
Re: HDMI + Sound + Mint 18
same problem with hdmi/analog swtiching exists in ubuntu mate too..
Noticed Switching resolution and playing old games (lower ress) seems to activate problem
Noticed Switching resolution and playing old games (lower ress) seems to activate problem
Re: HDMI + Sound + Mint 18
Hi,
It is the same problem in Sarah 18.1.
Please get it fixed. It is very annoying.
Is it a help if I tell you that if I put it in "standby" it will wake up in HDMI as it should.
Could you please tell me to whom I could complain if the problem is not resolved soon.
To stop using Mint is a bad solution.
Yours sincerely
Amoko
It is the same problem in Sarah 18.1.
Please get it fixed. It is very annoying.
Is it a help if I tell you that if I put it in "standby" it will wake up in HDMI as it should.
Could you please tell me to whom I could complain if the problem is not resolved soon.
To stop using Mint is a bad solution.
Yours sincerely
Amoko
Re: HDMI + Sound + Mint 18
Don't know if this will help others - but it solved this issue for me.
I added:
set-card-profile 1 output:hdmi-stereo+input:analog-stereo
to the end of /etc/pulse/default.pa
I figured out the card number (1) and output string from doing pacmd list-cards. For me the HDMI port shows up under index 1 and then the output string is under the profile section and looked sensible.
Running Mint 18 on a Lenovo Tiny M900 (awesome little unit). The fix has been "active" for almost a week now and works over multiple reboots/suspends/etc
I added:
set-card-profile 1 output:hdmi-stereo+input:analog-stereo
to the end of /etc/pulse/default.pa
I figured out the card number (1) and output string from doing pacmd list-cards. For me the HDMI port shows up under index 1 and then the output string is under the profile section and looked sensible.
Running Mint 18 on a Lenovo Tiny M900 (awesome little unit). The fix has been "active" for almost a week now and works over multiple reboots/suspends/etc
Re: HDMI + Sound + Mint 18
Hi!
Here is one solution for pulseaudio - HDMI no sound problem
Change value from 44100 to 48000 in file /etc/pulse/daemon.conf
As a workaround, set default-sample-rate to 48000 in /etc/pulse/daemon.conf (and restart pulseaudio) or restart computer.
Now you should have HDMI sound on tv or other device.
Do not forget to change sound cards in Sound Settings
Have fun
P.S.
Thank you tom.ty89 from bbs.archlinux.org for solution
Here is one solution for pulseaudio - HDMI no sound problem
Change value from 44100 to 48000 in file /etc/pulse/daemon.conf
As a workaround, set default-sample-rate to 48000 in /etc/pulse/daemon.conf (and restart pulseaudio) or restart computer.
Now you should have HDMI sound on tv or other device.
Do not forget to change sound cards in Sound Settings
Have fun
P.S.
Thank you tom.ty89 from bbs.archlinux.org for solution
Re: HDMI + Sound + Mint 18
I have NV 9600 M GT and it all worked on recent versions of Ubuntu. It still does on Win 7.
But I must manually mute the speakers (because they play alongside with TV) and switch to HDMI output on Serena.
Is there a way to switch automatically between speakers and HDMI just as I connect the cable?
But I must manually mute the speakers (because they play alongside with TV) and switch to HDMI output on Serena.
Is there a way to switch automatically between speakers and HDMI just as I connect the cable?