>solved> realtek RTL8723BE PCIe Wifi adapter not working.
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
>solved> realtek RTL8723BE PCIe Wifi adapter not working.
I am relatively new to the linux mint scene and just installed 18.1. The driver for the realtek wireless is working and I tried some commands from various topics in the forum that made the wifi adapter pick up the router I have at my house(some helped but I'm still having the same problem). However, whenever I activate the wifi on my computer I can only see my wireless network for a quick sec and then the switch for wifi goes from on to off and nothing else happens. Could use any help.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
That is correct an hour 17z laptop.
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
I've tried another WiFi adapter I got and I get the same problem... The driver is recognized for the Adapter but when I turn the WiFi on it won't stay on
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
See the wireless script link in my signature and post results. When you replaced the card was there 1 antenna wire or 2?
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
The card listed here is the internal wireless card. I tried another realtek 802.11e card that came on the screen but both did the exact same thing. I turned them on and then they shut off almost instantaneously. Here is the results of the script.
Code: Select all
#!/bin/bash
#
# Copyright (c) 2012
#
# Authors: Wild Man, Krytarik
# Helpers: chili555
#
# This script gathers the infos necessary for troubleshooting a wireless
# connection and saves them in a text file, wrapping it in an archive if it
# exceeds the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
#
##############################################################################
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
SCRIPTDATE="2016-07-07 21:16 -0500"
FILEBASE="wireless-info"
OUTPUTDIR="$PWD"
OUTPUTDIRFB="/tmp"
MODMATCHES="(air|ar5|at7|ath[^3]?|b43|bcma|brcm|carl|ipw|iwl|ndis|r(818|8192[eu]|871|92su)|8(188|189|192|723|812)[acde][esu]|rt[23567]|rtl|ssb|wl|(cfg|mac)80211)"
LSMODMATCHES="(wmi|(dell|ideapad)[-_]laptop)"
IFACEMATCHES="(wlan[0-9]|eth[0-9])"
DMESGMATCHES="(firmware|[nN]etwork)"
NMPROFMATCHES="\(\[connection\]\|id=\|type=\|permissions=\|autoconnect=\|\[802-11-wireless\]\|\[wifi\]\|ssid=\|bssid=\|mac-address\(-blacklist\)\?=\|mtu=\|\[802-1x\]\|[[:graph:]]*ca-certs\?=\|\[ipv[46]\]\|method=\)"
DMESGEXCL="apparmor|(cfg|mac)80211"
MODINFOEXCL="alias"
MODPROBEXCL="(alsa-base|blacklist-(firewire|framebuffer|modem|oss|watchdog)|fglrx|nvidia|fbdev|bumblebee)"
PMUTILSEXCL="/etc/pm/(power.d/(95hdparm-apm|intel-audio-powersave|sata_alpm)|sleep.d/(10_grub-common|10_unattended-upgrades.*|novatel_3g.*))"
NETMGRNAMES=("NetworkManager" "Wicd" "ConnMan")
NETMGRPATHS=("/usr/sbin/NetworkManager" "/usr/sbin/wicd" "/usr/sbin/connmand")
DEC2BI=({0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1})
DEC2HEX=($(printf "%02x " {0..255}))
export LANG="en_US.UTF-8"
export LANGUAGE="en_US:en"
export LC_ALL="en_US.UTF-8"
if [ -t 0 ]; then
DIALOGAPP="terminal"
DIALOGBREAK=" "
TERMOUT="yes"
elif [ -x /usr/bin/zenity ]; then
DIALOGAPP="zenity"
DIALOGBREAK="\n"
elif [ -x /usr/bin/kdialog ]; then
DIALOGAPP="kdialog"
DIALOGBREAK="\n"
else
exit 1
fi
if [ -t 0 ]; then
SUDO="sudo"
elif [ -x /usr/bin/pkexec ]; then
SUDO="pkexec"
elif [ -x /usr/bin/gksudo ]; then
SUDO="gksudo"
GKSUDO="yes"
elif [ -x /usr/bin/kdesudo ]; then
SUDO="kdesudo"
KDESUDO="yes"
KDESUDOCMT=" needs administrative privileges. Please enter your password."
fi
dialog_info () {
case $DIALOGAPP in
terminal)
printf "%b\n" "$1"
;;
zenity)
zenity --info --text="$1"
;;
kdialog)
kdialog --msgbox "$1"
;;
esac
}
dialog_error () {
case $DIALOGAPP in
terminal)
printf "%b\n" "$1" >&2
;;
zenity)
zenity --error --text="$1"
;;
kdialog)
kdialog --error "$1"
;;
esac
}
dialog_question () {
case $DIALOGAPP in
terminal)
local INPUT
read -r -p "$1 [Y/n]: " INPUT
echo "${INPUT,,}"
;;
zenity)
zenity --question --text="$1" || echo "no"
;;
kdialog)
kdialog --yesno "$1" || echo "no"
;;
esac
}
ip6-mac () {
for MAC in "$@"; do
OCT1BI=${DEC2BI[0x${MAC:0:2}]}
OCT1BI7=$((${OCT1BI:6:1} - 1))
OCT1BIM="${OCT1BI:0:6}${OCT1BI7#-}${OCT1BI:7}"
IP6S+=${IP6S:+$'\n'}"${DEC2HEX[2#$OCT1BIM]}${MAC:3:2}:${MAC:6:2}ff:fe${MAC:9:2}:${MAC:12:2}${MAC:15:2}"
done
sed 's/\(^\|:\)0\+\([[:alnum:]]\)/\1\2/g;s/^\([0:]\+\)/\\(::\\|\1\\)/' <<< "$IP6S"
}
exec 3>&1 4>&2
exec 1> "$OUTPUTDIR/$FILEBASE.txt" || {
dialog_error "${TERMOUT+\n}Cannot write output file in \"$OUTPUTDIR\",${DIALOGBREAK}trying in \"$OUTPUTDIRFB\" instead.${TERMOUT+\n}"
OUTPUTDIR="$OUTPUTDIRFB"
exec 1> "$OUTPUTDIR/$FILEBASE.txt" || {
dialog_error "${TERMOUT+\n}Cannot write output file in \"$OUTPUTDIR\" either, aborting.${TERMOUT+\n}"
exit 1
}
}
exec 2>&1
printf "\n########## wireless info START ##########\n\n"
REPORTDATE=$(date +"%d %b %Y %H:%M %Z %z")
SCRIPTDATE=$(date -u -d "$SCRIPTDATE" +"%d %b %Y %H:%M %Z %z")
LASTBOOTDT=$(last -FRn 1 reboot | sed -n 's/.*system boot[ ]\+\(.\+\) - .*$/\1/p')
LASTBOOTDT=$(date -d "$LASTBOOTDT" +"%d %b %Y %H:%M %Z %z")
printf "Report from: %s\n\n" "$REPORTDATE"
printf "Booted last: %s\n\n" "$LASTBOOTDT"
printf "Script from: %s\n" "$SCRIPTDATE"
printf "\n##### release ###########################\n\n"
lsb_release -idrc
printf "\n##### kernel ############################\n\n"
uname -srvmpio
echo
sed 's/root=[^ ]*//;s/[ ]\+/, /g;s/^BOOT_IMAGE=[^ ]*/Parameters:/' /proc/cmdline
printf "\n##### desktop ###########################\n\n"
if [ -n "$DESKTOP_SESSION" ]; then
DESKTOP="$DESKTOP_SESSION"
else
DESKTOP=$(sed -n 's/^Session=\(.\+\)$/\1/p' "$HOME/.dmrc")
DESKDMRC=" (from ~/.dmrc)"
fi
if [ -n "$DESKTOP" ]; then
if [ -f "/usr/share/xsessions/$DESKTOP.desktop" ]; then
DESKTOP=$(sed -n 's/^Name=\(.\+\)$/\1/p' "/usr/share/xsessions/$DESKTOP.desktop")
fi
echo "${DESKTOP/ Session/}${DESKDMRC}"
else
printf "\nCould not be determined.\n"
fi
printf "\n##### lspci #############################\n\n"
lspci -nnk | grep -iA 2 '^[^[:space:]].*net' | sed '/^--$/d; /^[^[:space:]]/ i\\'
printf "\n##### lsusb #############################\n\n"
lsusb
printf "\n##### PCMCIA card info ##################\n\n"
if [ -x /sbin/pccardctl ]; then
pccardctl info
else
echo "'pccardctl' is not installed (package \"pcmciautils\")."
fi
printf "\n##### rfkill ############################\n\n"
rfkill list all
printf "\n##### lsmod #############################\n\n"
LSMOD=$(lsmod | egrep "(^|[[:punct:] ])($MODMATCHES|$LSMODMATCHES)[^[:punct:] ]*([[:punct:] ]|$)")
echo "$LSMOD"
printf "\n##### interfaces ########################\n\n"
sed '/^#/d;s/^wpa-psk [[:graph:]]\+/wpa-psk <WPA key removed>/' /etc/network/interfaces
printf "\n##### ifconfig ##########################\n\n"
IFCONFIG=$(ifconfig -a)
sed '/^lo /,/^$/d' <<< "$IFCONFIG"
IFACESETH=($(sed -n 's/^\([^ ]\+\)[ ]\+Link encap:Ethernet.*/\1/p' <<< "$IFCONFIG"))
if (( ${#IFACESETH[@]} > 0 )); then
IFETHMATCHES=${IFACESETH[@]}
IFACEMATCHES="($IFACEMATCHES|(${IFETHMATCHES// /|}))"
fi
printf "\n##### iwconfig ##########################\n\n"
iwconfig
printf "\n##### route #############################\n\n"
route -n
printf "\n##### resolv.conf #######################\n\n"
grep -v '^#' /etc/resolv.conf
printf "\n##### network managers ##################\n\n"
printf "Installed:\n\n"
for NETMGRNR in "${!NETMGRPATHS[@]}"; do
if [ -f "${NETMGRPATHS[$NETMGRNR]}" ]; then
NETMGRINST+=("${NETMGRNAMES[$NETMGRNR]}")
fi
done
printf "\t%s\n" "${NETMGRINST[@]:-None found.}"
NETMGRMATCHES=${NETMGRPATHS[@]/#*\//|}
NETMGRMATCHES=${NETMGRMATCHES// |/|}
NETMGRMATCHES="(${NETMGRMATCHES#|})"
printf "\nRunning:\n\n"
ps -ef | egrep "( |/)$NETMGRMATCHES($| )" || printf "\tNone found.\n"
printf "\n##### NetworkManager info ###############\n\n"
if [ -x /usr/bin/nm-tool ]; then
nm-tool
elif [ -x /usr/bin/nmcli ]; then
nmcli -f all device show | sed '/^GENERAL.DEVICE:[ ]\+lo$/,/^$/d; /^AP\[[0-9]\+\]\./d'
echo
nmcli -f SSID,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,ACTIVE,IN-USE device wifi list
else
echo "NetworkManager is not installed (package \"network-manager\")."
fi
printf "\n##### NetworkManager.state ##############\n\n"
cat -s /var/lib/NetworkManager/NetworkManager.state
printf "\n##### NetworkManager.conf ###############\n\n"
grep -v '^#' /etc/NetworkManager/NetworkManager.conf
if [ -f /etc/NetworkManager/nm-system-settings.conf ]; then
printf "\nnm-system-settings.conf (used up to Ubuntu 10.04):\n\n"
grep -v '^#' /etc/NetworkManager/nm-system-settings.conf
fi
printf "\n##### NetworkManager profiles ###########\n\n"
if [ -d /etc/NetworkManager/system-connections ]; then
if [ -n "$SUDO" ]; then
trap "" 2 3
NMPROFILES=$(find /etc/NetworkManager/system-connections -maxdepth 1 -type f -exec $SUDO${GKSUDO+ -D grep --}${KDESUDO+ -d --comment "<b>grep</b>$KDESUDOCMT" --} grep -vH '^$' {} +) && SUDOSUCCESS="yes" || SUDOSUCCESS="no"
trap 2 3
if [ "$SUDOSUCCESS" = "yes" ]; then
ORIGIFS="$IFS"
IFS=$'\n'
for NMWLPRFFILE in $(sed -n 's/^\(.\+\):type=\(802-11-wireless\|wifi\).*$/\1/p' <<< "$NMPROFILES"); do
NMWLPRFFLPERMS=$(stat -c "%a %U" "$NMWLPRFFILE")
NMWLPROFILE=($(sed -n "s;^$NMWLPRFFILE:\($NMPROFMATCHES.*\)$;\1 |;p" <<< "$NMPROFILES"))
NMWLPROFSOUT+="[[$NMWLPRFFILE]] ($NMWLPRFFLPERMS)"$'\n'"${NMWLPROFILE[@]}"$'\n\n'
done
IFS="$ORIGIFS"
sed 's# | \[#\n\[#g;s#\] |#\]#g;s/ |$//' <<< "$NMWLPROFSOUT" | sed '/^\[[^]]*\]$/d'
else
printf "\nAcquisition of admin privileges failed.\n"
fi
else
echo "No way to acquire admin privileges found."
fi
else
echo "No NetworkManager profiles found."
fi
printf "\n##### iw reg get ########################\n\n"
if [ -x /sbin/iw ]; then
if IWREGGET=$(iw reg get 2>&1) && [ -f /etc/timezone ]; then
REGION=$(cat /etc/timezone)
printf "Region: %s (based on set time zone)\n\n" "$REGION"
fi
echo "$IWREGGET"
else
echo "'iw' is not installed (package \"iw\")."
fi
printf "\n##### iwlist channels ###################\n\n"
if [ -x /sbin/iwlist ]; then
iwlist chan
else
echo "'iwlist' is not installed (package \"wireless-tools\")."
fi
printf "\n##### iwlist scan #######################\n\n"
if [ -x /sbin/iwlist ]; then
if [ -n "$SUDO" ]; then
trap "" 2 3
IWLISTSCAN=$($SUDO${KDESUDO+ -d} iwlist scan) && SUDOSUCCESS="yes" || SUDOSUCCESS="no"
trap 2 3
if [ "$SUDOSUCCESS" = "yes" ]; then
if [[ $IWLISTSCAN = *Frequency:* ]]; then
printf "Channel occupancy:\n\n"
grep '^[ ]*Frequency:' <<< "$IWLISTSCAN" | sort | uniq -c | sed 's/^[ ]\+\([ ][0-9]\+\)[ ]\+/ \1 APs on /'
echo
fi
grep -v '^[ ]*IE: Unknown:' <<< "$IWLISTSCAN"
else
printf "\nAcquisition of admin privileges failed.\n"
fi
else
echo "No way to acquire admin privileges found."
fi
else
echo "'iwlist' is not installed (package \"wireless-tools\")."
fi
printf "\n##### module infos ######################\n\n"
MODULES=$(egrep -o "^$MODMATCHES[^ ]*" <<< "$LSMOD")
for MODULE in $MODULES; do
MODINFO=$(modinfo $MODULE | egrep -v "^$MODINFOEXCL:")
printf "[%s]\n%s\n\n" "$MODULE" "$MODINFO"
done
printf "\n##### module parameters #################\n\n"
for MODULE in $MODULES; do
if [ -d /sys/module/$MODULE/parameters ]; then
MODPARAMS=$(grep -H '^[[:graph:]]' /sys/module/$MODULE/parameters/* | sed 's#^.*/##;s/:/: /')
printf "[%s]\n%s\n\n" "$MODULE" "$MODPARAMS"
fi
done
printf "\n##### /etc/modules ######################\n\n"
grep -v '^#' /etc/modules
printf "\n##### modprobe options ##################\n\n"
for MODPROBEFILE in $(find /etc/modprobe.{conf,d} -name "*.conf" -regextype posix-egrep -not -regex ".*$MODPROBEXCL.*" 2> /dev/null | sort); do
MODPROBEOPTS=$(egrep -v '^(#|$)' $MODPROBEFILE)
if [ -n "$MODPROBEOPTS" ]; then
printf "[%s]\n%s\n\n" "$MODPROBEFILE" "$MODPROBEOPTS"
fi
done
printf "\n##### rc.local ##########################\n\n"
grep -v '^#' /etc/rc.local
printf "\n##### pm-utils ##########################\n\n"
for PMUTILSFILE in $(find /etc/pm/*.d \( -type f -o -type l \) -regextype posix-egrep -not -regex "$PMUTILSEXCL" | sort); do
PMUTFLCONT=$(egrep -v '^(#|$)' $PMUTILSFILE)
if [ -n "$PMUTFLCONT" ]; then
PMUTFLPERMS=$(stat -c "%a %U" $PMUTILSFILE)
printf "[%s] (%s)\n%s\n\n" "$PMUTILSFILE" "$PMUTFLPERMS" "$PMUTFLCONT"
fi
done
printf "\n##### udev rules ########################\n\n"
for UDEVRLFILE in $(find /etc/udev/rules.d -name "*net*.rules" | sort); do
UDEVRULES=$(grep -B1 '^[^#]' $UDEVRLFILE | egrep -v '^(--)?$')
if [ -n "$UDEVRULES" ]; then
printf "[%s]\n%s\n\n" "$UDEVRLFILE" "$UDEVRULES"
fi
done
printf "\n##### dmesg #############################\n\n"
dmesg | tail -n 100 | egrep "[[:punct:] ]($MODMATCHES|$IFACEMATCHES|$DMESGMATCHES)[^[:punct:] ]*[[:punct:] ]" | egrep -v "$DMESGEXCL" | uniq -cf 2 | sed 's/^[ ]\+1[ ]\+//;s/^[ ]\+\([0-9]\+\)[ ]\+\(.\+\)$/\2 (repeated \1 times)/'
printf "\n########## wireless info END ############\n\n"
exec 2>&4 4>&-
exec 1>&3 3>&-
##### MAC address masking #####
RESULTS=$(cat -s "$OUTPUTDIR/$FILEBASE.txt")$'\n'
ORIGIFS="$IFS"
IFS=$'\n'
IFACESIDS=($(sed -n "s/^\([^ ]\+\)[ ]\+.*HWaddr.*/'\1'/p" <<< "$IFCONFIG"))
IFACESMACS=($(sed -n 's/^[^ ]\+[ ]\+.*HWaddr \([^ ]\+\)[ ]*/\1/p' <<< "$IFCONFIG"))
IFACESIP6S=($(ip6-mac "${IFACESMACS[@]}"))
WLAPSIWLIDS=($(sed -n "/^[ ]*Cell [0-9]\+/,/^[ ]*ESSID:/ {/^[ ]*Cell [0-9]\+/h; /^[ ]*ESSID:/ {H;g;s/^[ ]*Cell 0\?\([0-9]\+\).*ESSID:\"\(.*\)\"$/'\2' [AC\1]/p}}" <<< "$IWLISTSCAN"))
WLAPSIWLMACS=($(sed -n 's/^[ ]*Cell [0-9]\+.*Address: \([^ ]\+\)/\1/p' <<< "$IWLISTSCAN"))
WLAPSIWLIP6S=($(ip6-mac "${WLAPSIWLMACS[@]}"))
WLAPSNMRAW=$(sed -n '/^##### NetworkManager info #####/,/^##### / {/^[ ]*Wireless Access Points/,/^$/ {/Wireless Access Points/d;s/^[ ]\+\*\?//;s/:[ ]\+/\t/;p}; /^SSID[ ]\+BSSID[ ]\+/,/^$/ {/^SSID[ ]\{2,\}BSSID[ ]\{2,\}/d;s/[ ]\{2,\}/\t/;p}}' <<< "$RESULTS")
WLAPSNMIDS=($(awk -F '\t' '{print "'\''" $1 "'\''"}' <<< "$WLAPSNMRAW"))
WLAPSNMMACS=($(grep -o '\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}' <<< "$WLAPSNMRAW"))
WLAPSNMIP6S=($(ip6-mac "${WLAPSNMMACS[@]}"))
IFS="$ORIGIFS"
for IFACENR in "${!IFACESMACS[@]}"; do
MACMASKSED+="s;${IFACESMACS[$IFACENR]};<MAC ${IFACESIDS[$IFACENR]} [IF$(($IFACENR + 1))]>;I;"
MACMASKSED+=" /${IFACESIP6S[$IFACENR]}/ s;${IFACESIP6S[$IFACENR]/#\\(::/\(};<IP6 ${IFACESIDS[$IFACENR]} [IF$(($IFACENR + 1))]>;I;"
IFACEMACC=${IFACESMACS[$IFACENR]//:/}
if [[ ${IFACESIDS[$IFACENR],,} =~ ${IFACEMACC,,} ]]; then
MACMASKSED+="s;\(${IFACESIDS[$IFACENR]:1:3}\)$IFACEMACC;\1<IF from MAC [IF$(($IFACENR + 1))]>;Ig;"
fi
done
for WLAPIWLNR in "${!WLAPSIWLMACS[@]}"; do
MACMASKSED+="s;${WLAPSIWLMACS[$WLAPIWLNR]};<MAC ${WLAPSIWLIDS[$WLAPIWLNR]}>;I;"
MACMASKSED+=" /${WLAPSIWLIP6S[$WLAPIWLNR]}/ s;${WLAPSIWLIP6S[$WLAPIWLNR]/#\\(::/\(};<IP6 ${WLAPSIWLIDS[$WLAPIWLNR]}>;I;"
done
for WLAPNMNR in "${!WLAPSNMMACS[@]}"; do
MACMASKSED+="s;${WLAPSNMMACS[$WLAPNMNR]};<MAC ${WLAPSNMIDS[$WLAPNMNR]} [AN$(($WLAPNMNR + 1))]>;I;"
MACMASKSED+=" /${WLAPSNMIP6S[$WLAPNMNR]}/ s;${WLAPSNMIP6S[$WLAPNMNR]/#\\(::/\(};<IP6 ${WLAPSNMIDS[$WLAPNMNR]} [AN$(($WLAPNMNR + 1))]>;I;"
done
sed "$MACMASKSED /\([[:alnum:]]\{2\}:\)\{6,\}/! s/\([[:alnum:]]\{2\}:\)\{5\}[[:alnum:]]\{2\}/<MAC address>/" <<< "$RESULTS" > "$OUTPUTDIR/$FILEBASE.txt"
Last edited by JeremyB on Mon Dec 19, 2016 7:22 pm, edited 1 time in total.
Reason: code tags
Reason: code tags
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
You posted the contents of the wireless-info file not the wireless-info.txt
Please try again as it does happen
Please try again as it does happen
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Sorry.
Code: Select all
########## wireless info START ##########
Report from: 19 Dec 2016 17:55 EST -0500
Booted last: 19 Dec 2016 00:00 EST -0500
Script from: 08 Jul 2016 02:16 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 18.1 Serena
Release: 18.1
Codename: serena
##### kernel ############################
Linux 4.4.0-53-generic #74-Ubuntu SMP Fri Dec 2 15:59:10 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Cinnamon
##### lspci #############################
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
DeviceName: RTL8166 Lan Connection
Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:821e]
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
DeviceName: Foxconn WLAN Realtek RTL8723BE bgn 1x1
Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter [103c:804c]
##### lsusb #############################
Bus 001 Device 005: ID 0bda:0177 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 04f3:2353 Elan Microelectronics Corp.
Bus 001 Device 003: ID 3938:1031
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 002 Device 003: ID 05c8:038f Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 002 Device 002: ID 0bda:b006 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
2: acer-wireless: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
rtl8xxxu 73728 0
rtl8192cu 69632 0
rtl_usb 20480 1 rtl8192cu
rtl8192c_common 53248 1 rtl8192cu
acer_wmi 20480 0
hp_wmi 16384 0
sparse_keymap 16384 2 acer_wmi,hp_wmi
rtl8723be 90112 0
btcoexist 53248 1 rtl8723be
rtl8723_common 24576 1 rtl8723be
rtl_pci 28672 1 rtl8723be
rtlwifi 77824 5 rtl_pci,rtl_usb,rtl8192c_common,rtl8192cu,rtl8723be
mac80211 737280 6 rtl8xxxu,rtl_pci,rtl_usb,rtlwifi,rtl8192cu,rtl8723be
cfg80211 565248 2 mac80211,rtlwifi
wmi 20480 2 acer_wmi,hp_wmi
video 40960 1 acer_wmi
##### interfaces ########################
auto lo
iface lo inet loopback
##### ifconfig ##########################
eno1 Link encap:Ethernet HWaddr <MAC 'eno1' [IF1]>
inet addr:192.168.1.175 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::cdaa:bfad:caff:4144/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1951 errors:0 dropped:0 overruns:0 frame:0
TX packets:1882 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1136278 (1.1 MB) TX bytes:225511 (225.5 KB)
wlo1 Link encap:Ethernet HWaddr <MAC 'wlo1' [IF2]>
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlx<IF from MAC [IF3]> Link encap:Ethernet HWaddr <MAC 'wlx<IF from MAC [IF3]>' [IF3]>
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
##### iwconfig ##########################
lo no wireless extensions.
eno1 no wireless extensions.
wlo1 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
wlx<IF from MAC [IF3]> IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:on
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eno1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eno1
192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 eno1
##### resolv.conf #######################
nameserver 127.0.1.1
search fios-router.home
##### network managers ##################
Installed:
NetworkManager
Running:
root 887 1 0 17:24 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: eno1
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: 2.3LK-NAPI
GENERAL.FIRMWARE-VERSION:
GENERAL.HWADDR: <MAC 'eno1' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:02.2/0000:01:00.0/net/eno1
GENERAL.IP-IFACE: eno1
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Wired connection 1
GENERAL.CON-UUID: b233da30-fc3a-3732-b3a2-1b02d4529e24
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: 100 Mb/s
CAPABILITIES.IS-SOFTWARE: no
WIRED-PROPERTIES.CARRIER: on
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: b233da30-fc3a-3732-b3a2-1b02d4529e24 | Wired connection 1
IP4.ADDRESS[1]: 192.168.1.175/24
IP4.GATEWAY: 192.168.1.1
IP4.ROUTE[1]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.1.1
IP4.DOMAIN[1]: fios-router.home
DHCP4.OPTION[1]: requested_routers = 1
DHCP4.OPTION[2]: requested_domain_search = 1
DHCP4.OPTION[3]: requested_host_name = 1
DHCP4.OPTION[4]: requested_time_offset = 1
DHCP4.OPTION[5]: requested_domain_name = 1
DHCP4.OPTION[6]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[7]: requested_broadcast_address = 1
DHCP4.OPTION[8]: requested_wpad = 1
DHCP4.OPTION[9]: requested_netbios_scope = 1
DHCP4.OPTION[10]: next_server = 0.0.0.0
DHCP4.OPTION[11]: broadcast_address = 192.168.1.255
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: requested_subnet_mask = 1
DHCP4.OPTION[14]: dhcp_lease_time = 86400
DHCP4.OPTION[15]: dhcp_message_type = 5
DHCP4.OPTION[16]: ip_address = 192.168.1.175
DHCP4.OPTION[17]: requested_static_routes = 1
DHCP4.OPTION[18]: expiry = 1482274044
DHCP4.OPTION[19]: requested_domain_name_servers = 1
DHCP4.OPTION[20]: subnet_mask = 255.255.255.0
DHCP4.OPTION[21]: requested_ntp_servers = 1
DHCP4.OPTION[22]: domain_name = fios-router.home
DHCP4.OPTION[23]: requested_netbios_name_servers = 1
DHCP4.OPTION[24]: domain_name_servers = 192.168.1.1
DHCP4.OPTION[25]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[26]: domain_search = fios-router.home.
DHCP4.OPTION[27]: network_number = 192.168.1.0
DHCP4.OPTION[28]: routers = 192.168.1.1
DHCP4.OPTION[29]: dhcp_server_identifier = 192.168.1.1
IP6.ADDRESS[1]: fe80::cdaa:bfad:caff:4144/64
IP6.GATEWAY:
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8723BE PCIe Wireless Network Adapter
GENERAL.DRIVER: rtl8723be
GENERAL.DRIVER-VERSION: 4.4.0-53-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC 'wlo1' [IF2]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:02.3/0000:02:00.0/net/wlo1
GENERAL.IP-IFACE:
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
GENERAL.DEVICE: wlx<IF from MAC [IF3]>
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Realtek
GENERAL.PRODUCT: 802.11n WLAN Adapter
GENERAL.DRIVER: rtl8192cu
GENERAL.DRIVER-VERSION: 4.4.0-53-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC 'wlx<IF from MAC [IF3]>' [IF3]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3:1.0/net/wlx<IF from MAC [IF3]>
GENERAL.IP-IFACE:
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE *
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE *
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=false
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Auto FiOS-91QTA]] (600 root)
[connection] id=Auto FiOS-91QTA | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlo1' [IF2]> | mac-address-blacklist= | ssid=FiOS-91QTA
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Auto 7deadlyZINS]] (600 root)
[connection] id=Auto 7deadlyZINS | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF3]>' [IF3]> | mac-address-blacklist= | ssid=7deadlyZINS
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Auto 7deadlyZINS-f0eba4d6-d45f-4c09-bed8-e80b0bd9b487]] (600 root)
[connection] id=Auto 7deadlyZINS | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF3]>' [IF3]> | mac-address-blacklist= | ssid=7deadlyZINS
[ipv4] method=auto
[ipv6] method=auto
##### iw reg get ########################
Region: America/New_York (based on set time zone)
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
(5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
eno1 no frequency information.
wlo1 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
wlx<IF from MAC [IF3]> 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
##### iwlist scan #######################
lo Interface doesn't support scanning.
wlo1 Interface doesn't support scanning : Network is down
eno1 Interface doesn't support scanning.
wlx<IF from MAC [IF3]> Interface doesn't support scanning : Network is down
##### module infos ######################
[rtl8xxxu]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
firmware: rtlwifi/rtl8192cufw_TMSC.bin
firmware: rtlwifi/rtl8192cufw_B.bin
firmware: rtlwifi/rtl8192cufw_A.bin
firmware: rtlwifi/rtl8723aufw_B_NoBT.bin
firmware: rtlwifi/rtl8723aufw_B.bin
firmware: rtlwifi/rtl8723aufw_A.bin
license: GPL
description: RTL8XXXu USB mac80211 Wireless LAN Driver
author: Jes Sorensen <Jes.Sorensen@redhat.com>
srcversion: 6318AD97B9A7F66A430B132
depends: mac80211
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
parm: debug:Set debug mask (int)
parm: ht40_2g:Enable HT40 support on the 2.4GHz band (bool)
[rtl8192cu]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko
firmware: rtlwifi/rtl8192cufw_TMSC.bin
firmware: rtlwifi/rtl8192cufw_B.bin
firmware: rtlwifi/rtl8192cufw_A.bin
firmware: rtlwifi/rtl8192cufw.bin
description: Realtek 8192C/8188C 802.11n USB wireless
license: GPL
author: Larry Finger <Larry.Finger@lwfinger.net>
author: Ziv Huang <ziv_huang@realtek.com>
author: Georgia <georgia@realtek.com>
srcversion: 2C9D776AE1B25BDC5405217
depends: mac80211,rtlwifi,rtl8192c-common,rtl_usb
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
parm: swenc:Set to 1 for software crypto (default 0)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
[rtl_usb]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko
description: USB basic driver for rtlwifi
license: GPL
author: Larry Finger <Larry.FInger@lwfinger.net>
author: Realtek WlanFAE <wlanfae@realtek.com>
author: lizhaoming <chaoming_li@realsil.com.cn>
srcversion: 856F91AC5F9AFDB1993D1E4
depends: mac80211,rtlwifi
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
[rtl8192c_common]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko
description: Realtek 8192C/8188C 802.11n PCI wireless
license: GPL
author: Larry Finger <Larry.Finger@lwfinger.net>
author: Ziv Huang <ziv_huang@realtek.com>
author: Georgia <georgia@realtek.com>
author: Realtek WlanFAE <wlanfae@realtek.com>
author: lizhaoming <chaoming_li@realsil.com.cn>
srcversion: 68438042FA7FFFCF4EB1B75
depends: rtlwifi
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
[rtl8723be]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rtl8723be.ko
firmware: rtlwifi/rtl8723befw.bin
description: Realtek 8723BE 802.11n PCI wireless
license: GPL
author: Realtek WlanFAE <wlanfae@realtek.com>
author: PageHe <page_he@realsil.com.cn>
srcversion: 3B2ECD9306CE299232BAE5D
depends: rtlwifi,rtl8723-common,rtl_pci,btcoexist,mac80211
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
parm: swenc:Set to 1 for software crypto (default 0)
(bool)
parm: ips:Set to 0 to not use link power save (default 1)
(bool)
parm: swlps:Set to 1 to use SW control power save (default 0)
(bool)
parm: fwlps:Set to 1 to use FW control power save (default 1)
(bool)
parm: msi:Set to 1 to use MSI interrupts mode (default 0)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
parm: disable_watchdog:Set to 1 to disable the watchdog (default 0)
(bool)
parm: ant_sel:Set to 1 or 2 to force antenna number (default 0)
(int)
[rtl8723_common]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723com/rtl8723-common.ko
description: Realtek RTL8723AE/RTL8723BE 802.11n PCI wireless common routines
license: GPL
author: Larry Finger <Larry.Finger@lwfinger.net>
author: Realtek WlanFAE <wlanfae@realtek.com>
srcversion: AC6426E73F4CB059EE7332C
depends:
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
[rtl_pci]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko
description: PCI basic driver for rtlwifi
license: GPL
author: Larry Finger <Larry.FInger@lwfinger.net>
author: Realtek WlanFAE <wlanfae@realtek.com>
author: lizhaoming <chaoming_li@realsil.com.cn>
srcversion: A96EBF28EBD4603749D5EC3
depends: mac80211,rtlwifi
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
[rtlwifi]
filename: /lib/modules/4.4.0-53-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko
description: Realtek 802.11n PCI wireless core
license: GPL
author: Larry Finger <Larry.FInger@lwfinger.net>
author: Realtek WlanFAE <wlanfae@realtek.com>
author: lizhaoming <chaoming_li@realsil.com.cn>
srcversion: 81DBE78DD4871E3EC5F2E9D
depends: mac80211,cfg80211
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
[mac80211]
filename: /lib/modules/4.4.0-53-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: F1176862D12ECD05A1066CF
depends: cfg80211
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.4.0-53-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: FD4B9DA2F385F0531B5CB0B
depends:
intree: Y
vermagic: 4.4.0-53-generic SMP mod_unload modversions
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
grep: /sys/module/rtl8xxxu/parameters/debug: Permission denied
grep: /sys/module/rtl8xxxu/parameters/ht40_2g: Permission denied
[rtl8xxxu]
[rtl8192cu]
debug: 0
swenc: N
[rtl8723be]
ant_sel: 0
debug: 0
disable_watchdog: N
fwlps: Y
ips: Y
msi: N
swenc: N
swlps: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
exit 0
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 11.691488] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 11.748062] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.748338] rtlwifi: rtlwifi: wireless switch is on
[ 12.554358] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 12.554362] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 12.998193] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[ 27.398271] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 27.406830] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 27.659846] r8169 0000:01:00.0 eno1: link down (repeated 2 times)
[ 27.659972] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 29.251630] r8169 0000:01:00.0 eno1: link up
[ 29.251653] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 36.122211] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 194.082480] r8169 0000:01:00.0 eno1: link down
[ 1336.551385] rtl8192cu: Chip version 0x10
[ 1337.052044] rtl8192cu: MAC address: <MAC 'wlx<IF from MAC [IF3]>' [IF3]>
[ 1337.052051] rtl8192cu: Board Type 0
[ 1337.053288] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 1337.053351] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 1337.055087] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[ 1337.065437] rtl8192cu 2-3:1.0 wlx<IF from MAC [IF3]>: renamed from wlan0
[ 1337.095775] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF3]>: link is not ready
[ 1402.689571] r8169 0000:01:00.0 eno1: link up
########## wireless info END ############
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Should be an easy fix
Reboot
Code: Select all
echo "blacklist acer_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Awesome!! Thank you so much. One more question if you could answer it. the realtek 802.11n Wlan external adapter picks up the wifi signal at 60% but the internal wifi adapter realtek rtl 8723be pci does not pick up the wifi signal barely at all(not functionable). It's just a usb port and not that big of a deal but if you could answer it i'd appreciate it.
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
I'm sorry even with the realtek 802.11e the wireless is intermittent. I am in my house and so is the router. it should be pretty high and the signal should not disconnect.
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Some newer HP laptops use only one antenna with the rtl8723be, the following code should help you set the ant_sel parameter to the correct antenna
Then we check the second option to find which one works better
If ant_sel=1 is better
If ant_sel=2 is better
Code: Select all
sudo modprobe -r rtl8723be
Code: Select all
sudo modprobe rtl8723be ant_sel=1
Code: Select all
iwlist scan | egrep -i 'ssid|quality'
Code: Select all
sudo modprobe -r rtl8723be
Code: Select all
sudo modprobe rtl8723be ant_sel=2
Code: Select all
iwlist scan | egrep -i 'ssid|quality'
Code: Select all
echo "options rtl8723be ant_sel=1" | sudo tee -a /etc/modprobe.d/rtl8723be.conf
Code: Select all
echo "options rtl8723be ant_sel=2" | sudo tee -a /etc/modprobe.d/rtl8723be.conf
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
I did ant sel 1 but in the network settings the realtek rtl8723be pci internal modem is only picking up 34% while in the results it shows different statistics. The realtek 802.11e external modem now shows 0 signal strength. Hear is what it said.
Code: Select all
bakamono@HydroSpace ~ $ sudo modprobe -r rtl8723be
bakamono@HydroSpace ~ $ sudo modprobe rtl8723be ant_sel=1
bakamono@HydroSpace ~ $ iwlist scan | egrep -i 'ssid|quality'
lo Interface doesn't support scanning.
Quality=38/70 Signal level=-72 dBm
ESSID:"HotRod"
Quality=38/70 Signal level=-72 dBm
ESSID:"TZH5M"
Quality=38/70 Signal level=-72 dBm
ESSID:"2Z24R"
eno1 Interface doesn't support scanning.
Quality=70/70 Signal level=-26 dBm
ESSID:"FiOS-91QTA"
Quality=70/70 Signal level=-38 dBm
ESSID:"7deadlyZINS"
Quality=64/70 Signal level=-46 dBm
ESSID:"7deadlyZins"
Quality=36/70 Signal level=-74 dBm
ESSID:"HotRod2"
Quality=36/70 Signal level=-74 dBm
ESSID:"xfinitywifi"
Quality=36/70 Signal level=-74 dBm
ESSID:"LYLQ4LNU"
Quality=38/70 Signal level=-72 dBm
ESSID:""
Quality=34/70 Signal level=-76 dBm
ESSID:"nwood4"
Quality=34/70 Signal level=-76 dBm
ESSID:"willyp's Guest Network"
bakamono@HydroSpace ~ $ sudo modprobe -r rtl8723be
bakamono@HydroSpace ~ $ sudo modprobe rtl8723be ant_sel=2
bakamono@HydroSpace ~ $ iwlist scan | egrep -i 'ssid|quality'
lo Interface doesn't support scanning.
eno1 Interface doesn't support scanning.
bakamono@HydroSpace ~ $ echo "options rtl8723be ant_sel=1" | sudo tee -a /etc/modprobe.d/rtl8723be.conf
options rtl8723be ant_sel=1
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
It might be a module glitch for the external USB wifi that causes it to report 0 signal strength as I know Pjotr has talked about it before. Let's see if the settings were changed correctly
Code: Select all
grep [[:alnum:]] /sys/module/rtl8723be/parameters/*
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
/sys/module/rtl8723be/parameters/ant_sel:1
/sys/module/rtl8723be/parameters/debug:0
/sys/module/rtl8723be/parameters/disable_watchdog:N
/sys/module/rtl8723be/parameters/fwlps:Y
/sys/module/rtl8723be/parameters/ips:Y
/sys/module/rtl8723be/parameters/msi:N
/sys/module/rtl8723be/parameters/swenc:N
/sys/module/rtl8723be/parameters/swlps:N
thank you!
/sys/module/rtl8723be/parameters/debug:0
/sys/module/rtl8723be/parameters/disable_watchdog:N
/sys/module/rtl8723be/parameters/fwlps:Y
/sys/module/rtl8723be/parameters/ips:Y
/sys/module/rtl8723be/parameters/msi:N
/sys/module/rtl8723be/parameters/swenc:N
/sys/module/rtl8723be/parameters/swlps:N
thank you!
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Alright maybe it was a reboot that was needed. THe signal strength of the realtek rtl8723be pcie wifi adapter is at 86% which is functional, but the 802.11e is at 60%. I'm just curious why the difference.
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Another wierd thing is that when I reboot the signal strength seem to swith. The realtek internal card picks up 60 and realtek 802.11e picks up 100. Reboot and the signal strength seems to reverse the internal card is at 100 and the 802.11 is 60. I just want to see if I can get both cards at 100. Also. I'm picking up a wifi signal at 100% that isn't in my household. Granted I live in a twin, but I don't understand why there's would be stronger than ours. Thank you.
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
I don't really know how to increase the signal strength but if your wifi router has the option to use a 20MHz channel width instead of 40MHz it may help with the signal strength
Re: Realtek RTL8723BE PCIe Wifi adapter not working.
Righteeo! Thank you very much!