I have been trying to find the exact hardware specs, it is the model with the E1 processor and realtek Ethernet.It would be nice to figure this out.
Weird problem. Wifi unavailable after reboot.
Forum rules
Before you post please read how to get help
Before you post please read how to get help
Weird problem. Wifi unavailable after reboot.
I installed Mint 18.1 Cinnamon on my HP 655 laptop. When I do a cold boot wireless networks show up and the laptop connects automatically to my home network just like it should. The problem is if I reboot the system I get "no wireless networks are available", or something to that effect.
I have been trying to find the exact hardware specs, it is the model with the E1 processor and realtek Ethernet.It would be nice to figure this out.
I have been trying to find the exact hardware specs, it is the model with the E1 processor and realtek Ethernet.It would be nice to figure this out.
Re: Weird problem.
Here is the output.
Code: Select all
System: Host: HP-655-Notebook Kernel: 4.4.0-59-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.2.7 (Gtk 3.18.9-1ubuntu3.1)
Distro: Linux Mint 18.1 Serena
Machine: System: Hewlett-Packard (portable) product: HP 655 Notebook PC v: 087F110000305B10002620110
Mobo: Hewlett-Packard model: 1885 v: 66.34
Bios: Insyde v: F.29 date: 05/08/2014
CPU: Dual core AMD E1-1200 APU with Radeon HD Graphics (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4a ssse3 svm) bmips: 5589
clock speeds: max: 1400 MHz 1: 1400 MHz 2: 1166 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Wrestler [Radeon HD 7310]
bus-ID: 00:01.0
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1366x768@60.07hz
GLX Renderer: Gallium 0.4 on AMD PALM (DRM 2.43.0, LLVM 3.8.0)
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel bus-ID: 00:14.2
Card-2 Advanced Micro Devices [AMD/ATI] Wrestler HDMI Audio
driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture v: k4.4.0-59-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 03:00.0
IF: eno1 state: down mac: <filter>
Card-2: Ralink RT3290 Wireless 802.11n 1T/1R PCIe
driver: rt2800pci v: 2.3.0 bus-ID: 04:00.0
IF: wlo1 state: up mac: <filter>
Drives: HDD Total Size: 320.1GB (2.9% used)
ID-1: /dev/sda model: Hitachi_HTS54323 size: 320.1GB
Partition: ID-1: / size: 290G used: 5.3G (2%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 3.87GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 51.5C mobo: N/A gpu: 51.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 174 Uptime: 3 min Memory: 701.8/3550.3MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461) inxi: 2.2.35
Re: Weird problem.
Googling "Ralink RT3290 Wireless unavailable after reboot" turns up may reports of similar sounding issues. One recurring mention is it may go into airplane mode by itself. I think you can check with command
rfkill list what current status is. I'd check the output of that command after cold boot (i.e., after power on) and after warm boot (i.e., after reboot).
Re: Weird problem.
Here is the output after powering on.
Identical output after reboot but no wifi networks available.
Code: Select all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Code: Select all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: nRe: Weird problem. Wifi unavailable after reboot.
See the wireless script link in my signature, run it once and post results when it works, then reboot and run
Once you connect again post the non working results. Note the name of the results file is wireless-info.txt
Feel free to edit the post with the working script results to include the results when it doesn't work and please use code tags
Code: Select all
./wireless-infoFeel free to edit the post with the working script results to include the results when it doesn't work and please use code tags
Re: Weird problem. Wifi unavailable after reboot.
Here are the results with the wifi working.
Code: Select all
########## wireless info START ##########
Report from: 29 Jan 2017 18:02 EST -0500
Booted last: 29 Jan 2017 00:00 EST -0500
Script from: 08 Jul 2016 02:16 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 18.1 Serena
Release: 18.1
Codename: serena
##### kernel ############################
Linux 4.4.0-59-generic #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Cinnamon
##### lspci #############################
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
DeviceName: Realtek PCIe GBE Family Controller
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [103c:1885]
04:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290]
DeviceName: Ralink RT3290LE 802.11bgn 1x1 Wi-Fi Adapter
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter [103c:18ec]
##### lsusb #############################
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b34f Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 3938:1032
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
rt2800pci 16384 0
rt2800mmio 20480 1 rt2800pci
rt2800lib 94208 2 rt2800pci,rt2800mmio
rt2x00pci 16384 1 rt2800pci
hp_wmi 16384 0
rt2x00mmio 16384 2 rt2800pci,rt2800mmio
sparse_keymap 16384 1 hp_wmi
rt2x00lib 57344 5 rt2x00pci,rt2800lib,rt2800pci,rt2800mmio,rt2x00mmio
mac80211 737280 3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211 565248 2 mac80211,rt2x00lib
eeprom_93cx6 16384 1 rt2800pci
crc_ccitt 16384 1 rt2800lib
wmi 20480 1 hp_wmi
##### interfaces ########################
auto lo
iface lo inet loopback
##### ifconfig ##########################
eno1 Link encap:Ethernet HWaddr <MAC 'eno1' [IF1]>
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlo1 Link encap:Ethernet HWaddr <MAC 'wlo1' [IF2]>
inet addr:10.0.0.201 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::f1d:bcc4:46b8:8ffd/64 Scope:Link
inet6 addr: 2601:802:c201:5000:60c7:6803:6d42:54e8/64 Scope:Global
inet6 addr: 2601:802:c201:5000:f003:2db8:19eb:2a62/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1592 errors:0 dropped:0 overruns:0 frame:0
TX packets:1538 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1155258 (1.1 MB) TX bytes:216350 (216.3 KB)
##### iwconfig ##########################
lo no wireless extensions.
eno1 no wireless extensions.
wlo1 IEEE 802.11bgn ESSID:"Cosner"
Mode:Managed Frequency:2.437 GHz Access Point: <MAC 'Cosner' [AC1]>
Bit Rate=43.3 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=-39 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:3 Invalid misc:154 Missed beacon:0
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.0.0.1 0.0.0.0 UG 600 0 0 wlo1
10.0.0.0 0.0.0.0 255.255.255.0 U 600 0 0 wlo1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlo1
##### resolv.conf #######################
nameserver 127.0.1.1
search hsd1.in.comcast.net
##### network managers ##################
Installed:
NetworkManager
Running:
root 907 1 0 17:57 ? 00:00:01 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Ralink corp.
GENERAL.PRODUCT: RT3290 Wireless 802.11n 1T/1R PCIe (Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter)
GENERAL.DRIVER: rt2800pci
GENERAL.DRIVER-VERSION: 4.4.0-59-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC 'wlo1' [IF2]>
GENERAL.MTU: 0
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.3/0000:04:00.0/net/wlo1
GENERAL.IP-IFACE: wlo1
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Auto Cosner
GENERAL.CON-UUID: f5fa4488-42c8-4bd2-9d6c-95b0b2c34b2f
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/0
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: 58 Mb/s
CAPABILITIES.IS-SOFTWARE: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{0}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: f5fa4488-42c8-4bd2-9d6c-95b0b2c34b2f | Auto Cosner
IP4.ADDRESS[1]: 10.0.0.201/24
IP4.GATEWAY: 10.0.0.1
IP4.ROUTE[1]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 75.75.75.75
IP4.DNS[2]: 75.75.76.76
IP4.DOMAIN[1]: hsd1.in.comcast.net
DHCP4.OPTION[1]: requested_subnet_mask = 1
DHCP4.OPTION[2]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[3]: subnet_mask = 255.255.255.0
DHCP4.OPTION[4]: domain_name_servers = 75.75.75.75 75.75.76.76
DHCP4.OPTION[5]: ip_address = 10.0.0.201
DHCP4.OPTION[6]: requested_static_routes = 1
DHCP4.OPTION[7]: dhcp_server_identifier = 10.0.0.1
DHCP4.OPTION[8]: requested_time_offset = 1
DHCP4.OPTION[9]: broadcast_address = 10.0.0.255
DHCP4.OPTION[10]: requested_interface_mtu = 1
DHCP4.OPTION[11]: dhcp_rebinding_time = 529200
DHCP4.OPTION[12]: requested_domain_name_servers = 1
DHCP4.OPTION[13]: dhcp_message_type = 5
DHCP4.OPTION[14]: requested_broadcast_address = 1
DHCP4.OPTION[15]: routers = 10.0.0.1
DHCP4.OPTION[16]: dhcp_renewal_time = 302400
DHCP4.OPTION[17]: requested_domain_name = 1
DHCP4.OPTION[18]: domain_name = hsd1.in.comcast.net
DHCP4.OPTION[19]: requested_routers = 1
DHCP4.OPTION[20]: expiry = 1486335441
DHCP4.OPTION[21]: host_name = HP-655-Notebook
DHCP4.OPTION[22]: requested_netbios_scope = 1
DHCP4.OPTION[23]: requested_wpad = 1
DHCP4.OPTION[24]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[25]: requested_netbios_name_servers = 1
DHCP4.OPTION[26]: network_number = 10.0.0.0
DHCP4.OPTION[27]: requested_domain_search = 1
DHCP4.OPTION[28]: next_server = 10.0.0.1
DHCP4.OPTION[29]: requested_ntp_servers = 1
DHCP4.OPTION[30]: requested_host_name = 1
DHCP4.OPTION[31]: dhcp_lease_time = 604800
IP6.ADDRESS[1]: 2601:802:c201:5000:60c7:6803:6d42:54e8/64
IP6.ADDRESS[2]: 2601:802:c201:5000:f003:2db8:19eb:2a62/64
IP6.ADDRESS[3]: fe80::f1d:bcc4:46b8:8ffd/64
IP6.GATEWAY: fe80::282a:cff:fe24:4377
IP6.DNS[1]: 2001:558:feed::1
IP6.DNS[2]: 2001:558:feed::2
GENERAL.DEVICE: eno1
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: 2.3LK-NAPI
GENERAL.FIRMWARE-VERSION:
GENERAL.HWADDR: <MAC 'eno1' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.1/0000:03:00.0/net/eno1
GENERAL.IP-IFACE:
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE *
xfinitywifi <MAC 'xfinitywifi' [AC3]> Infra 6 2437 MHz 54 Mbit/s 100 ▂▄▆█ -- no
-- <MAC '' [AC4]> Infra 6 2437 MHz 54 Mbit/s 99 ▂▄▆█ WPA1 WPA2 no
Cosner <MAC 'Cosner' [AC1]> Infra 6 2437 MHz 54 Mbit/s 83 ▂▄▆█ WPA1 WPA2 yes *
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Auto Cosner]] (600 root)
[connection] id=Auto Cosner | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlo1' [IF2]> | mac-address-blacklist= | ssid=Cosner
[ipv4] method=auto
[ipv6] method=auto
##### iw reg get ########################
Region: America/Indiana/Indianapolis (based on set time zone)
country US: DFS-FCC
(2402 - 2472 @ 40), (N/A, 30), (N/A)
(5170 - 5250 @ 80), (N/A, 17), (N/A)
(5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS
(5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5735 - 5835 @ 80), (N/A, 30), (N/A)
(57240 - 63720 @ 2160), (N/A, 40), (N/A)
##### iwlist channels ###################
lo no frequency information.
eno1 no frequency information.
wlo1 11 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Current Frequency:2.437 GHz (Channel 6)
##### iwlist scan #######################
lo Interface doesn't support scanning.
eno1 Interface doesn't support scanning.
Channel occupancy:
5 APs on Frequency:2.437 GHz (Channel 6)
1 APs on Frequency:2.462 GHz (Channel 11)
wlo1 Scan completed :
Cell 01 - Address: <MAC 'Cosner' [AC1]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=70/70 Signal level=-39 dBm
Encryption key:on
ESSID:"Cosner"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000221b5da2016
Extra: Last beacon: 4ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Cell 02 - Address: <MAC '' [AC2]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=46/70 Signal level=-64 dBm
Encryption key:on
ESSID:""
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000221b57d4180
Extra: Last beacon: 7092ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Cell 03 - Address: <MAC 'xfinitywifi' [AC3]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=70/70 Signal level=-39 dBm
Encryption key:off
ESSID:"xfinitywifi"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000221b5d97180
Extra: Last beacon: 1000ms ago
Cell 04 - Address: <MAC '' [AC4]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=70/70 Signal level=-37 dBm
Encryption key:on
ESSID:""
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000221b5d97180
Extra: Last beacon: 976ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Cell 05 - Address: <MAC '' [AC5]>
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=14/70 Signal level=-96 dBm
Encryption key:on
ESSID:""
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000015fb8d2180
Extra: Last beacon: 5448ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Cell 06 - Address: <MAC 'ATT048' [AC6]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=16/70 Signal level=-94 dBm
Encryption key:on
ESSID:"ATT048"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=0000000061602183
Extra: Last beacon: 968ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
##### module infos ######################
[rt2800pci]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
license: GPL
firmware: rt2860.bin
description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 26CCED9E0CE5EFBFA9B8882
depends: rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
parm: nohwcrypt:Disable hardware encryption. (bool)
[rt2800mmio]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2800mmio.ko
license: GPL
description: rt2800 MMIO library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 01C1A7641505065E52E0388
depends: rt2800lib,rt2x00lib,rt2x00mmio
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2800lib]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
license: GPL
description: Ralink RT2800 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion: BB9F48B63A82C3FD3E73BAF
depends: rt2x00lib,mac80211,crc-ccitt
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2x00pci]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
license: GPL
description: rt2x00 pci library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 543B84557258F153AC267F0
depends: rt2x00lib,mac80211
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2x00mmio]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2x00mmio.ko
license: GPL
description: rt2x00 mmio library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: ADBE279820CFD0A1081C682
depends: rt2x00lib
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2x00lib]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
license: GPL
description: rt2x00 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 72E39180D883A5541F66494
depends: mac80211,cfg80211
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[mac80211]
filename: /lib/modules/4.4.0-59-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 0B114888238BEBBE8043BC5
depends: cfg80211
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.4.0-59-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: FD4B9DA2F385F0531B5CB0B
depends:
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[rt2800pci]
nohwcrypt: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
exit 0
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 17.760157] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 17.768003] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 18.028215] rt2800pci 0000:04:00.0 wlo1: renamed from wlan0
[ 28.662387] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 28.662532] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 28.805882] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 28.931630] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 28.958222] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 29.173802] r8169 0000:03:00.0 eno1: link down
[ 29.174094] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 29.690955] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 30.857954] wlo1: authenticate with <MAC 'Cosner' [AC1]>
[ 30.863638] wlo1: send auth to <MAC 'Cosner' [AC1]> (try 1/3)
[ 30.865643] wlo1: authenticated
[ 30.867160] wlo1: associate with <MAC 'Cosner' [AC1]> (try 1/3)
[ 30.871378] wlo1: RX AssocResp from <MAC 'Cosner' [AC1]> (capab=0x431 status=0 aid=2)
[ 30.871574] wlo1: associated
[ 30.871702] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 140.364328] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush (repeated 6 times)
########## wireless info END ############
Re: Weird problem. Wifi unavailable after reboot.
Here is the output after rebooting.
Code: Select all
########## wireless info START ##########
Report from: 29 Jan 2017 18:09 EST -0500
Booted last: 29 Jan 2017 00:00 EST -0500
Script from: 08 Jul 2016 02:16 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 18.1 Serena
Release: 18.1
Codename: serena
##### kernel ############################
Linux 4.4.0-59-generic #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Cinnamon
##### lspci #############################
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
DeviceName: Realtek PCIe GBE Family Controller
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [103c:1885]
04:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290]
DeviceName: Ralink RT3290LE 802.11bgn 1x1 Wi-Fi Adapter
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter [103c:18ec]
##### lsusb #############################
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b34f Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 3938:1032
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
rt2800pci 16384 0
rt2800mmio 20480 1 rt2800pci
rt2800lib 94208 2 rt2800pci,rt2800mmio
rt2x00pci 16384 1 rt2800pci
rt2x00mmio 16384 2 rt2800pci,rt2800mmio
rt2x00lib 57344 5 rt2x00pci,rt2800lib,rt2800pci,rt2800mmio,rt2x00mmio
mac80211 737280 3 rt2x00lib,rt2x00pci,rt2800lib
hp_wmi 16384 0
sparse_keymap 16384 1 hp_wmi
cfg80211 565248 2 mac80211,rt2x00lib
eeprom_93cx6 16384 1 rt2800pci
crc_ccitt 16384 1 rt2800lib
wmi 20480 1 hp_wmi
##### interfaces ########################
auto lo
iface lo inet loopback
##### ifconfig ##########################
eno1 Link encap:Ethernet HWaddr <MAC 'eno1' [IF1]>
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlo1 Link encap:Ethernet HWaddr <MAC 'wlo1' [IF2]>
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
##### iwconfig ##########################
lo no wireless extensions.
eno1 no wireless extensions.
wlo1 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
##### resolv.conf #######################
##### network managers ##################
Installed:
NetworkManager
Running:
root 890 1 0 18:07 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: eno1
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: 2.3LK-NAPI
GENERAL.FIRMWARE-VERSION:
GENERAL.HWADDR: <MAC 'eno1' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.1/0000:03:00.0/net/eno1
GENERAL.IP-IFACE:
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Ralink corp.
GENERAL.PRODUCT: RT3290 Wireless 802.11n 1T/1R PCIe (Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter)
GENERAL.DRIVER: rt2800pci
GENERAL.DRIVER-VERSION: 4.4.0-59-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC 'wlo1' [IF2]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.3/0000:04:00.0/net/wlo1
GENERAL.IP-IFACE:
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE *
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Auto Cosner]] (600 root)
[connection] id=Auto Cosner | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlo1' [IF2]> | mac-address-blacklist= | ssid=Cosner
[ipv4] method=auto
[ipv6] method=auto
##### iw reg get ########################
Region: America/Indiana/Indianapolis (based on set time zone)
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
(5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
eno1 no frequency information.
wlo1 14 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
##### iwlist scan #######################
lo Interface doesn't support scanning.
wlo1 Interface doesn't support scanning : Network is down
eno1 Interface doesn't support scanning.
##### module infos ######################
[rt2800pci]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
license: GPL
firmware: rt2860.bin
description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 26CCED9E0CE5EFBFA9B8882
depends: rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
parm: nohwcrypt:Disable hardware encryption. (bool)
[rt2800mmio]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2800mmio.ko
license: GPL
description: rt2800 MMIO library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 01C1A7641505065E52E0388
depends: rt2800lib,rt2x00lib,rt2x00mmio
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2800lib]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
license: GPL
description: Ralink RT2800 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion: BB9F48B63A82C3FD3E73BAF
depends: rt2x00lib,mac80211,crc-ccitt
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2x00pci]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
license: GPL
description: rt2x00 pci library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 543B84557258F153AC267F0
depends: rt2x00lib,mac80211
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2x00mmio]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2x00mmio.ko
license: GPL
description: rt2x00 mmio library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: ADBE279820CFD0A1081C682
depends: rt2x00lib
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[rt2x00lib]
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
license: GPL
description: rt2x00 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 72E39180D883A5541F66494
depends: mac80211,cfg80211
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
[mac80211]
filename: /lib/modules/4.4.0-59-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 0B114888238BEBBE8043BC5
depends: cfg80211
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.4.0-59-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: FD4B9DA2F385F0531B5CB0B
depends:
intree: Y
vermagic: 4.4.0-59-generic SMP mod_unload modversions
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[rt2800pci]
nohwcrypt: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
exit 0
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 18.273110] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 18.277665] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 18.595408] rt2800pci 0000:04:00.0 wlo1: renamed from wlan0
[ 28.840026] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 29.092022] r8169 0000:03:00.0 eno1: link down
[ 29.092847] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 29.139615] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 29.139761] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 29.175221] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 30.797398] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 32.409401] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 34.245448] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 35.845753] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 37.473695] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 39.081865] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 50.762296] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 52.374712] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 53.990781] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 55.590898] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 67.771577] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 69.371728] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 70.991500] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 72.595913] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 84.776594] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 86.376712] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 87.996749] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 89.596899] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 101.797405] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 103.409603] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 105.037818] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 106.665854] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 118.782531] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 120.410591] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 122.050476] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 123.650689] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
########## wireless info END ############
Last edited by JeremyB on Sun Jan 29, 2017 7:19 pm, edited 1 time in total.
Reason: redid code tags
Reason: redid code tags
Re: Weird problem. Wifi unavailable after reboot.
I would try
Shutdown and do a cold boot, then try the reboot
See if it makes things work correctly once again
Code: Select all
sudo sed -i 's/wifi.powersave = 3/wifi.powersave = 2/' /etc/NetworkManager/conf.d/default-wifi-powersave-on.confSee if it makes things work correctly once again
Re: Weird problem. Wifi unavailable after reboot.
Gave it a try, still getting wireless unavailable after rebooting.
Re: Weird problem. Wifi unavailable after reboot.
Can you disable wireless-N mode on the wifi router and see if the problem still exists?
Re: Weird problem. Wifi unavailable after reboot.
No, it is a Comcast router that has on and off.
Re: Weird problem. Wifi unavailable after reboot.
You could try
Reboot
It might be worth trying when it doesn't work
Code: Select all
echo "options rt2800pci nohwcrypt=1" | sudo tee /etc/modprobe.d/rt2800pci.confIt might be worth trying
Code: Select all
systemctl restart NetworkManager.serviceRe: Weird problem. Wifi unavailable after reboot.
Gave that a try, it just displayed that I was off-line. Still have network not available.
Re: Weird problem. Wifi unavailable after reboot.
Any result for
When it isn't working?
This thread on ubuntuforums is the reason I asked about disabling wireless-N mode
https://ubuntuforums.org/showthread.php?t=2334099
You may also have this bug https://bugs.launchpad.net/ubuntu/+sour ... ug/1584542
Code: Select all
sudo ifconfig wlo1 upThis thread on ubuntuforums is the reason I asked about disabling wireless-N mode
https://ubuntuforums.org/showthread.php?t=2334099
You may also have this bug https://bugs.launchpad.net/ubuntu/+sour ... ug/1584542
Re: Weird problem. Wifi unavailable after reboot.
I get
Edit: It sure looks like that bug to me. The HP 655 does have the latest BIOS and firmware updates though...
Code: Select all
SIOCSIFFAGS: Input/output errorRe: Weird problem. Wifi unavailable after reboot.
Oddly the problem did not exist with Manjaro, however other things were wrong there. The problem only occurs with the Ubuntu 16.04 base, (Mint 18.1). I have tried newer kernels with the same results. The problem also did not occur with Mint 17 using the Ubuntu 14.04 base.
Re: Weird problem. Wifi unavailable after reboot.
I would have you file a bug report and have Clem upstream it to ubuntu. Your first script results showed an error I thought was related to power management being enabled
But the non working results reminded me of chili555's answer on ubuntuforums
Code: Select all
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush (repeated 6 times)-
lmintnewb2
Re: Weird problem. Wifi unavailable after reboot.
Hiya Explorer, hope things are well fellow nixer.
Have you tried another network manager? Only a thought but are plenty of others with or w/o gui frontends. Generally keep network-manager as is on Mint and had no probs, use ceni on Deb Jessie, also no probs.
2 cents.
Between the two, actually prefer ceni. Not hard to work with and as light as you get pretty much but am by no means a Nix wireless networking guru.
Have you tried another network manager? Only a thought but are plenty of others with or w/o gui frontends. Generally keep network-manager as is on Mint and had no probs, use ceni on Deb Jessie, also no probs.
2 cents.
Between the two, actually prefer ceni. Not hard to work with and as light as you get pretty much but am by no means a Nix wireless networking guru.