Dell Inspiron 7559 Proprietary Graphics Driver Installation

Christo6 · Post by **Christo6** » Thu Jul 27, 2017 10:23 pm

I am attempting to load the nvidia proprietary graphics drivers on my Inspiron 7559, running Linux mint 18.2 cinnamon 64-bit edition. From a new install I have tried installing different version of the nvidia drivers (nvidia-367, nvidia-375, nvidia-384). Each time I installed the drivers and switch to nvidia with prime-select it caused the system to hang or the CPU to soft lock.

The inxi output after installing nvidia-367:

Code: Select all

System:    Host: crae-Inspiron-7559 Kernel: 4.8.0-53-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Cinnamon 3.4.4 (Gtk 3.18.9-1ubuntu3.3) dm: lightdm
           Distro: Linux Mint 18.2 Sonya
Machine:   System: Dell (portable) product: Inspiron 7559 v: 1.2.3
           Mobo: Dell model: 0H87XC v: A00
           Bios: Dell v: 1.2.3 date: 05/16/2017
           Chassis: type: 10
CPU:       Quad core Intel Core i5-6300HQ (-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 18432
           clock speeds: min/max: 800/3200 MHz 1: 799 MHz 2: 800 MHz
           3: 800 MHz 4: 799 MHz
Graphics:  Card-1: Intel Skylake Integrated Graphics
           bus-ID: 00:02.0 chip-ID: 8086:191b
           Card-2: NVIDIA GM107M [GeForce GTX 960M]
           bus-ID: 02:00.0 chip-ID: 10de:139b
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau
           Resolution: 1920x1080@60.01hz
           GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
           GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio:     Card Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
           Sound: Advanced Linux Sound Architecture v: k4.8.0-53-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d000
           bus-ID: 04:00.0 chip-ID: 10ec:8168
           IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Intel Wireless 3165
           driver: iwlwifi bus-ID: 05:00.0 chip-ID: 8086:3165
           IF: wlp5s0 state: down mac: <filter>
Drives:    HDD Total Size: 1000.2GB (5.6% used)
           ID-1: /dev/sda model: ST1000LM014 size: 1000.2GB serial: W773AKS1
Partition: ID-1: / size: 909G used: 45G (6%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.46GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   System Temperatures: cpu: 52.0C mobo: 27.8C
           Fan Speeds (in rpm): cpu: N/A
Repos:     Active apt sources in file: /etc/apt/sources.list.d/official-package-repositories.list
           deb http://packages.linuxmint.com sonya main upstream import backport #id:linuxmint_main
           deb http://archive.ubuntu.com/ubuntu xenial main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu xenial-updates main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu/ xenial partner
           Active apt sources in file: /etc/apt/sources.list.d/webupd8team-java-xenial.list
           deb http://ppa.launchpad.net/webupd8team/java/ubuntu xenial main
           deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu xenial main
Info:      Processes: 229 Uptime: 1 min Memory: 576.7/7859.7MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in gnome-terminal-) inxi: 2.2.35

I was able to get the nvidia graphics driver to run once, but it started hanging again after a reboot. Here is the dmesg output from when it loaded:
https://pastebin.com/rArr8JSh

Some things I have already tried:

kernels:
Kernel 4.4
Kernel 4.8
Kernel 4.10

boot parameters:
nomodeset - boots, but doesn't load drivers of course
acpi_osi= - boots, but nvidia driver does not load
acpi_osi="!Windows 2015" - same as above

switching using nvidia-prime - boots and allows login while using intel, hangs when switching to nvidia
bumblebee - fails to run [ERROR[ Cannot access secondary GPU - error [XORG] (EE)

The BIOS has been updated to the lastest version, and there is no option to enable or disable either the integrated graphics, nor the dedicated graphics.

Any help would be appreciated. I will reinstall 18.2 cinnamon fresh.

roblm · Post by **roblm** » Fri Jul 28, 2017 9:28 am

You need to post some additional info. Use these commands in the Terminal:

Code: Select all

1. xed /var/log/gpu-manager.log	        
2. dpkg -l |grep -i nvidia
3. lspci -nnk |egrep -A3 -i "3D|VGA"
4. ls /etc/modprobe.d
5. ls /etc/X11

Christo6 · Post by **Christo6** » Fri Jul 28, 2017 3:59 pm

gpu-manager.log

Code: Select all

log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-53-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-53-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:191b
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:139b
BusID "PCI:2@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Found "/dev/dri/card0", driven by "i915"
output 0:
	card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
The number of cards has changed!
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
System configuration has changed
Intel IGP detected
Desktop system detected
or laptop with open drivers
Discrete NVIDIA card detected
System configuration has changed
Removing xorg.conf. Path: /etc/X11/xorg.conf
Moved /etc/X11/xorg.conf to /etc/X11/xorg.conf.07282017

dpkg

Code: Select all

ii  bbswitch-dkms                               0.8-3ubuntu1                                            amd64        Interface for toggling the power on NVIDIA Optimus video cards
ii  nvidia-367                                  375.66-0ubuntu0.16.04.1                                 amd64        Transitional package for nvidia-375
ii  nvidia-375                                  375.66-0ubuntu0.16.04.1                                 amd64        NVIDIA binary driver - version 375.66
ii  nvidia-prime                                0.8.2linuxmint1                                         amd64        Tools to enable NVIDIA's Prime
ii  nvidia-prime-applet                         1.0.6                                                   all          An applet for NVIDIA Prime

lspci

Code: Select all

00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
	DeviceName:  Onboard IGD
	Subsystem: Dell Skylake Integrated Graphics [1028:0706]
	Kernel driver in use: i915
--
02:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 960M] [10de:139b] (rev a2)
	Subsystem: Dell GM107M [GeForce GTX 960M] [1028:0706]
	Kernel driver in use: nvidia
	Kernel modules: nvidiafb, nouveau, nvidia_375_drm, nvidia_375

modprobe.d

Code: Select all

alsa-base.conf              blacklist-modem.conf         fbdev-blacklist.conf
blacklist-ath_pci.conf      blacklist-oss.conf           iwlwifi.conf
blacklist.conf              blacklist-rare-network.conf  mlx4.conf
blacklist-firewire.conf     blacklist-watchdog.conf      nvidia-375_hybrid.conf
blacklist-framebuffer.conf  dkms.conf                    vmwgfx-fbdev.conf

X11

Code: Select all

app-defaults             xinit               Xreset      Xsession.d
default-display-manager  xkb                 Xreset.d    Xsession.options
fonts                    xorg.conf.07272017  Xresources  xsm
rgb.txt                  xorg.conf.07282017  Xsession    Xwrapper.config

And because it might be of interest: nvidia-375_hybrid.conf

Code: Select all

# This file was installed by nvidia-375
# Do not edit this file manually

blacklist nouveau
blacklist lbm-nouveau
alias nouveau off
alias lbm-nouveau off

roblm · Post by **roblm** » Fri Jul 28, 2017 7:53 pm

On Optimus systems there are usually two files created in /etc/modprobe.d when the Nvidia driver is enabled, which disables the nouveau driver, unless that has changed in Mint 18.2. One is named nvidia-3xx_hybrid.conf, which exists, and the other is named nvidia-graphics-drivers.conf, which does not exist. I don't why both are needed. Use this command to create the second file:

Code: Select all

gksudo xed /etc/modprobe.d/nvidia-graphics-drivers.conf

In the opened empty file, add these lines:

Code: Select all

blacklist nouveau
options nouveau modeset=0

Then use this command to update the initial RAM disk:

Code: Select all

sudo update-initramfs -u

Reboot twice. Some users have reported it was needed to see a change. Then switch to the Nvidia GPU and log out and back in.
If there is a problem getting back to the desktop, then press Ctrl+Alt+F1 to enter the virtual console tty1. Login and then type this command to switch to the Intel GPU:

Code: Select all

sudo prime-select intel

Then type: sudo reboot
When you get to the desktop, post the Xorg.0.log.old file, not the Xorg.0.log file. Use this command to open it:

Code: Select all

xed /var/log/Xorg.0.log.old

Press Ctrl+A to select the entire file contents. Right click on the screen and select “Copy”. Don't save it to a file. Open the Mint Forum reply window and select “Code” in the menu. Press Ctrl+V to paste the lines between the two code words. If you have problems posting that long file, then upload it to github.com by using this command:

Code: Select all

pastebin /var/log/Xorg.0.log.old

Post the URL link that displays in the Terminal window.

Christo6 · Post by **Christo6** » Fri Jul 28, 2017 10:31 pm

Xorg.0.log.old

Code: Select all

[    20.123] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    20.123] X Protocol Version 11, Revision 0
[    20.123] Build Operating System: Linux 4.4.0-83-generic x86_64 Ubuntu
[    20.123] Current Operating System: Linux crae-Inspiron-7559 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:18:56 UTC 2017 x86_64
[    20.123] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-53-generic root=UUID=c0f60046-214b-4677-a39e-931844bb85ce ro
[    20.123] Build Date: 17 July 2017  05:05:12PM
[    20.123] xorg-server 2:1.18.4-0ubuntu0.3 (For technical support please see http://www.ubuntu.com/support) 
[    20.123] Current version of pixman: 0.33.6
[    20.123] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.123] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.123] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 28 19:25:43 2017
[    20.138] (==) Using config file: "/etc/X11/xorg.conf"
[    20.138] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.139] (==) ServerLayout "layout"
[    20.139] (**) |-->Screen "nvidia" (0)
[    20.139] (**) |   |-->Monitor "<default monitor>"
[    20.140] (**) |   |-->Device "nvidia"
[    20.140] (**) |   |-->GPUDevice "nvidia"
[    20.140] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[    20.140] (**) |-->Inactive Device "intel"
[    20.140] (==) Automatically adding devices
[    20.140] (==) Automatically enabling devices
[    20.140] (==) Automatically adding GPU devices
[    20.140] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    20.147] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.147] 	Entry deleted from font path.
[    20.147] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.147] 	Entry deleted from font path.
[    20.147] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.147] 	Entry deleted from font path.
[    20.148] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.148] 	Entry deleted from font path.
[    20.148] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.148] 	Entry deleted from font path.
[    20.148] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    20.148] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.148] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.148] (II) Loader magic: 0x5640ab862dc0
[    20.148] (II) Module ABI versions:
[    20.148] 	X.Org ANSI C Emulation: 0.4
[    20.148] 	X.Org Video Driver: 20.0
[    20.148] 	X.Org XInput driver : 22.1
[    20.148] 	X.Org Server Extension : 9.0
[    20.149] (++) using VT number 7

[    20.149] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    20.149] (II) xfree86: Adding drm device (/dev/dri/card1)
[    20.150] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.163] (--) PCI:*(0:0:2:0) 8086:191b:1028:0706 rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    20.163] (--) PCI: (0:2:0:0) 10de:139b:1028:0706 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    20.163] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    20.163] (II) "glx" will be loaded by default.
[    20.163] (II) LoadModule: "glx"
[    20.163] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    20.277] (II) Module glx: vendor="NVIDIA Corporation"
[    20.277] 	compiled for 4.0.2, module version = 1.0.0
[    20.277] 	Module class: X.Org Server Extension
[    20.278] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[    20.278] (II) LoadModule: "nvidia"
[    20.278] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    20.286] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.286] 	compiled for 4.0.2, module version = 1.0.0
[    20.286] 	Module class: X.Org Video Driver
[    20.286] (II) LoadModule: "modesetting"
[    20.287] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.287] (II) Module modesetting: vendor="X.Org Foundation"
[    20.287] 	compiled for 1.18.4, module version = 1.18.4
[    20.287] 	Module class: X.Org Video Driver
[    20.287] 	ABI class: X.Org Video Driver, version 20.0
[    20.287] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[    20.287] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    20.288] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.298] (II) Loading sub module "fb"
[    20.298] (II) LoadModule: "fb"
[    20.298] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.298] (II) Module fb: vendor="X.Org Foundation"
[    20.298] 	compiled for 1.18.4, module version = 1.0.0
[    20.298] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.298] (II) Loading sub module "wfb"
[    20.298] (II) LoadModule: "wfb"
[    20.298] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    20.299] (II) Module wfb: vendor="X.Org Foundation"
[    20.299] 	compiled for 1.18.4, module version = 1.0.0
[    20.299] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.299] (II) Loading sub module "ramdac"
[    20.299] (II) LoadModule: "ramdac"
[    20.299] (II) Module "ramdac" already built-in
[    20.309] (II) modeset(G0): using drv /dev/dri/card0
[    20.310] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[    20.310] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    20.310] (==) NVIDIA(0): RGB weight 888
[    20.310] (==) NVIDIA(0): Default visual is TrueColor
[    20.310] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.311] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[    20.311] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
[    20.311] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[    20.311] (**) NVIDIA(0): Enabling 2D acceleration
[    20.503] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:2:0:0 (GPU-0)
[    20.503] (--) NVIDIA(0): Memory: 4194304 kBytes
[    20.503] (--) NVIDIA(0): VideoBIOS: 82.07.7a.00.19
[    20.503] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    20.503] (II) NVIDIA(0): Validated MetaModes:
[    20.503] (II) NVIDIA(0):     "NULL"
[    20.503] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    20.503] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    20.503] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    20.503] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    20.503] (**) modeset(G0): Option "AccelMethod" "None"
[    20.503] (==) modeset(G0): RGB weight 888
[    20.503] (==) modeset(G0): Default visual is TrueColor
[    20.503] (**) modeset(G0): glamor disabled
[    20.503] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[    20.505] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    20.506] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    20.507] (II) modeset(G0): EDID for output eDP-1-1
[    20.507] (II) modeset(G0): Manufacturer: BOE  Model: 62f  Serial#: 0
[    20.507] (II) modeset(G0): Year: 2015  Week: 1
[    20.507] (II) modeset(G0): EDID Version: 1.4
[    20.507] (II) modeset(G0): Digital Display Input
[    20.507] (II) modeset(G0): 6 bits per channel
[    20.507] (II) modeset(G0): Digital interface is DisplayPort
[    20.507] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    20.507] (II) modeset(G0): Gamma: 2.20
[    20.507] (II) modeset(G0): No DPMS capabilities specified
[    20.507] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.507] (II) modeset(G0): First detailed timing is preferred mode
[    20.507] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    20.507] (II) modeset(G0): redX: 0.590 redY: 0.350   greenX: 0.329 greenY: 0.555
[    20.507] (II) modeset(G0): blueX: 0.152 blueY: 0.118   whiteX: 0.312 whiteY: 0.328
[    20.507] (II) modeset(G0): Manufacturer's mask: 0
[    20.507] (II) modeset(G0): Supported detailed timing:
[    20.507] (II) modeset(G0): clock: 141.4 MHz   Image Size:  344 x 194 mm
[    20.507] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2142 h_border: 0
[    20.507] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1100 v_border: 0
[    20.507] (II) modeset(G0): Supported detailed timing:
[    20.507] (II) modeset(G0): clock: 113.1 MHz   Image Size:  344 x 194 mm
[    20.507] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2142 h_border: 0
[    20.507] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1100 v_border: 0
[    20.507] (II) modeset(G0):  YHDGT\80NV15N41
[    20.507] (II) modeset(G0): Unknown vendor-specific block 0
[    20.507] (II) modeset(G0): EDID (in hex):
[    20.507] (II) modeset(G0): 	00ffffffffffff0009e52f0600000000
[    20.507] (II) modeset(G0): 	01190104952213780a24109759548e27
[    20.507] (II) modeset(G0): 	1e505400000001010101010101010101
[    20.507] (II) modeset(G0): 	0101010101013c3780de703814403020
[    20.507] (II) modeset(G0): 	360058c21000001a302c80de70381440
[    20.507] (II) modeset(G0): 	3020360058c21000001a000000fe0059
[    20.507] (II) modeset(G0): 	48444754804e5631354e343100000000
[    20.507] (II) modeset(G0): 	0000411196000000000a010a2020006a
[    20.507] (II) modeset(G0): Printing probed modes for output eDP-1-1
[    20.507] (II) modeset(G0): Modeline "1920x1080"x60.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[    20.507] (II) modeset(G0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    20.507] (II) modeset(G0): Modeline "1920x1080"x48.0  113.12  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (52.8 kHz e)
[    20.507] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    20.507] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    20.507] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    20.507] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    20.507] (II) modeset(G0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    20.507] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    20.507] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    20.507] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    20.507] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    20.507] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    20.507] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    20.507] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    20.507] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    20.507] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    20.507] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    20.507] (II) modeset(G0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    20.507] (II) modeset(G0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    20.507] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    20.507] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    20.507] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    20.507] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    20.509] (II) modeset(G0): EDID for output HDMI-1-1
[    20.509] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.509] (==) modeset(G0): DPI set to (96, 96)
[    20.509] (II) Loading sub module "fb"
[    20.509] (II) LoadModule: "fb"
[    20.509] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.509] (II) Module fb: vendor="X.Org Foundation"
[    20.509] 	compiled for 1.18.4, module version = 1.0.0
[    20.509] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.509] (II) Loading sub module "shadow"
[    20.509] (II) LoadModule: "shadow"
[    20.509] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    20.509] (II) Module shadow: vendor="X.Org Foundation"
[    20.509] 	compiled for 1.18.4, module version = 1.1.0
[    20.509] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.509] (--) Depth 24 pixmap format is 32 bpp
[    20.512] (==) modeset(G0): Backing store enabled
[    20.512] (==) modeset(G0): Silken mouse enabled
[    20.512] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.513] (==) modeset(G0): DPMS enabled
[    20.513] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[    20.513] (WW) modeset(G0): Option "IgnoreDisplayDevices" is not used
[    20.778] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    20.778] (II) NVIDIA:     access.

Rebooted twice after adding the nvidia config file and running initramfs.
switched to nvidia with prime, system hung before showing login screen.

roblm · Post by **roblm** » Sat Jul 29, 2017 4:04 pm

Use this command in the Terminal and post the output:

Code: Select all

sudo prime-select nvidia

Then use this command and post the output:

Code: Select all

sudo update-alternatives --config x86_64-linux-gnu_gl_conf

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 4:37 pm

prime-select nvidia

Code: Select all

Info: the current GL alternatives in use are: ['nvidia-375-prime', 'nvidia-375-prime']
Info: the current EGL alternatives in use are: ['nvidia-375-prime', 'nvidia-375-prime']
Info: selecting nvidia-375 for the nvidia profile
update-alternatives: using /usr/lib/nvidia-375/ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in manual mode
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic link

update-alternatives: using /usr/lib/nvidia-375/ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_EGL.conf (x86_64-linux-gnu_egl_conf) in manual mode
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic link

update-alternatives: using /usr/lib/nvidia-375/alt_ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in manual mode
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic link

update-alternatives: using /usr/lib/nvidia-375/alt_ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_EGL.conf (i386-linux-gnu_egl_conf) in manual mode
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic link

update-alternatives

Code: Select all

There are 3 choices for the alternative x86_64-linux-gnu_gl_conf (providing /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf).

  Selection    Path                                       Priority   Status
------------------------------------------------------------
  0            /usr/lib/nvidia-375/ld.so.conf              8604      auto mode
  1            /usr/lib/nvidia-375-prime/ld.so.conf        8603      manual mode
* 2            /usr/lib/nvidia-375/ld.so.conf              8604      manual mode
  3            /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf   500       manual mode

Wonder if selecing nvidia-375-prime would change anything

roblm · Post by **roblm** » Sat Jul 29, 2017 5:18 pm

Christo6 wrote:Wonder if selecing nvidia-375-prime would change anything

That option would be used when the Intel GPU is selected. What we don't want to see is this option selected, which was listed in the gpu-manager.log:

Code: Select all

/usr/lib/x86_64-linux-gnu/mesa/ld.so.conf

Your problem is puzzling. The Xorg.0.log.old file, which was created when you last selected the Nvidia GPU and logged out, but could not return to the desktop, looks like everything was configured correctly and should work. Would you open the xorg.conf.07272017 and xorg.conf.07282017 files and post the output. Use these commands to open them:

Code: Select all

xed /etc/X11/xorg.conf.07272017
xed /etc/X11/xorg.conf.07282017

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 5:24 pm

07272017 is no longer there.

07282017:

Code: Select all

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    BusID "PCI:0@0:2:0"
    Option "AccelMethod" "None"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:2@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

roblm · Post by **roblm** » Sat Jul 29, 2017 7:23 pm

That's strange. The xorg.conf.07272017 file, which was listed in the ls /etc/Xll output should still exist. When the Nvidia GPU is selected, the gpu-manager renames the xorg.conf.07282017 file, or one of the others, to xorg.conf. That file is configured correctly.

I suggest disabling the gpu-manager and manually configuring the Nvidia driver. Use this command to rename the xorg.conf.07282017 file to xorg.conf:

Code: Select all

sudo mv /etc/X11/xorg.conf.07282017 /etc/X11/xorg.conf

Then use this command to open the grub file:

Code: Select all

gksudo xed /etc/default/grub

Change this line:

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

To this, to disable the gpu-manager:

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nogpumanager"

Then use this command to update grub:

Code: Select all

sudo update-grub

Reboot. Then switch to the Nvidia GPU:

Code: Select all

sudo prime-select nvidia

Log out and back in. If you can't get back to the desktop, then use the command sudo reboot. If there is still a problem, then press Ctrl+Alt+F1 to enter the virtual console tty1. Login and then type this command to rename the xorg.conf file:

Code: Select all

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.07282017

Then use these commands: sudo prime-select intel and sudo reboot

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 7:41 pm

Booting with nogpumanager works with intel selected, the mesa drivers are loading. Using prime-select nvidia then relogging causes cinnamon to go into fallback mode, no graphics drivers seem to be loading.

inxi -G

Code: Select all

Graphics:  Card-1: Intel Skylake Integrated Graphics
           Card-2: NVIDIA GM107M [GeForce GTX 960M]
           Display Server: X.Org 1.18.4 drivers: nvidia,nouveau,intel (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.01hz
           GLX Renderer: N/A GLX Version: N/A

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 7:55 pm

Xorg.0.log might be useful

Code: Select all

[    82.777] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    82.777] X Protocol Version 11, Revision 0
[    82.777] Build Operating System: Linux 4.4.0-83-generic x86_64 Ubuntu
[    82.777] Current Operating System: Linux crae-Inspiron-7559 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:18:56 UTC 2017 x86_64
[    82.777] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-53-generic root=UUID=c0f60046-214b-4677-a39e-931844bb85ce ro nogpumanager
[    82.777] Build Date: 17 July 2017  05:05:12PM
[    82.777] xorg-server 2:1.18.4-0ubuntu0.3 (For technical support please see http://www.ubuntu.com/support) 
[    82.777] Current version of pixman: 0.33.6
[    82.778] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    82.778] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    82.778] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 29 16:37:02 2017
[    82.778] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    82.778] (==) No Layout section.  Using the first Screen section.
[    82.778] (==) No screen section available. Using defaults.
[    82.778] (**) |-->Screen "Default Screen Section" (0)
[    82.778] (**) |   |-->Monitor "<default monitor>"
[    82.779] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    82.779] (==) Automatically adding devices
[    82.779] (==) Automatically enabling devices
[    82.779] (==) Automatically adding GPU devices
[    82.779] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    82.779] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    82.779] 	Entry deleted from font path.
[    82.779] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    82.779] 	Entry deleted from font path.
[    82.779] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    82.779] 	Entry deleted from font path.
[    82.779] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    82.779] 	Entry deleted from font path.
[    82.779] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    82.779] 	Entry deleted from font path.
[    82.779] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    82.779] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    82.779] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    82.779] (II) Loader magic: 0x560f6328ddc0
[    82.779] (II) Module ABI versions:
[    82.779] 	X.Org ANSI C Emulation: 0.4
[    82.779] 	X.Org Video Driver: 20.0
[    82.779] 	X.Org XInput driver : 22.1
[    82.779] 	X.Org Server Extension : 9.0
[    82.780] (++) using VT number 7

[    82.780] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    82.781] (II) xfree86: Adding drm device (/dev/dri/card1)
[    82.781] (II) xfree86: Adding drm device (/dev/dri/card0)
[    82.791] (--) PCI:*(0:0:2:0) 8086:191b:1028:0706 rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    82.791] (--) PCI: (0:2:0:0) 10de:139b:1028:0706 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    82.791] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    82.791] (II) "glx" will be loaded by default.
[    82.791] (II) LoadModule: "glx"
[    82.791] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    82.889] (II) Module glx: vendor="NVIDIA Corporation"
[    82.889] 	compiled for 4.0.2, module version = 1.0.0
[    82.889] 	Module class: X.Org Server Extension
[    82.890] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[    82.890] (==) Matched intel as autoconfigured driver 0
[    82.890] (==) Matched nvidia as autoconfigured driver 1
[    82.890] (==) Matched nouveau as autoconfigured driver 2
[    82.890] (==) Matched intel as autoconfigured driver 3
[    82.890] (==) Matched modesetting as autoconfigured driver 4
[    82.890] (==) Matched fbdev as autoconfigured driver 5
[    82.890] (==) Matched vesa as autoconfigured driver 6
[    82.890] (==) Assigned the driver to the xf86ConfigLayout
[    82.891] (II) LoadModule: "intel"
[    82.891] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    82.891] (II) Module intel: vendor="X.Org Foundation"
[    82.891] 	compiled for 1.18.4, module version = 2.99.917
[    82.891] 	Module class: X.Org Video Driver
[    82.891] 	ABI class: X.Org Video Driver, version 20.0
[    82.891] (II) LoadModule: "nvidia"
[    82.891] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    82.902] (II) Module nvidia: vendor="NVIDIA Corporation"
[    82.902] 	compiled for 4.0.2, module version = 1.0.0
[    82.902] 	Module class: X.Org Video Driver
[    82.903] (II) LoadModule: "nouveau"
[    82.903] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    82.903] (II) Module nouveau: vendor="X.Org Foundation"
[    82.903] 	compiled for 1.18.1, module version = 1.0.12
[    82.903] 	Module class: X.Org Video Driver
[    82.903] 	ABI class: X.Org Video Driver, version 20.0
[    82.903] (II) LoadModule: "modesetting"
[    82.904] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    82.904] (II) Module modesetting: vendor="X.Org Foundation"
[    82.904] 	compiled for 1.18.4, module version = 1.18.4
[    82.904] 	Module class: X.Org Video Driver
[    82.904] 	ABI class: X.Org Video Driver, version 20.0
[    82.904] (II) LoadModule: "fbdev"
[    82.904] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    82.904] (II) Module fbdev: vendor="X.Org Foundation"
[    82.904] 	compiled for 1.18.1, module version = 0.4.4
[    82.904] 	Module class: X.Org Video Driver
[    82.904] 	ABI class: X.Org Video Driver, version 20.0
[    82.904] (II) LoadModule: "vesa"
[    82.904] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    82.905] (II) Module vesa: vendor="X.Org Foundation"
[    82.905] 	compiled for 1.18.1, module version = 2.3.4
[    82.905] 	Module class: X.Org Video Driver
[    82.905] 	ABI class: X.Org Video Driver, version 20.0
[    82.905] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    82.905] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    82.905] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    82.905] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    82.905] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[    82.905] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    82.906] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[    82.906] (II) NOUVEAU driver for NVIDIA chipset families :
[    82.906] 	RIVA TNT        (NV04)
[    82.906] 	RIVA TNT2       (NV05)
[    82.906] 	GeForce 256     (NV10)
[    82.906] 	GeForce 2       (NV11, NV15)
[    82.906] 	GeForce 4MX     (NV17, NV18)
[    82.906] 	GeForce 3       (NV20)
[    82.906] 	GeForce 4Ti     (NV25, NV28)
[    82.906] 	GeForce FX      (NV3x)
[    82.906] 	GeForce 6       (NV4x)
[    82.906] 	GeForce 7       (G7x)
[    82.906] 	GeForce 8       (G8x)
[    82.906] 	GeForce GTX 200 (NVA0)
[    82.906] 	GeForce GTX 400 (NVC0)
[    82.906] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    82.906] (II) FBDEV: driver for framebuffer: fbdev
[    82.906] (II) VESA: driver for VESA chipsets: vesa
[    82.906] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[    82.906] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[    82.906] (II) intel(0): SNA compiled for use with valgrind
[    82.907] (EE) [drm] Failed to open DRM device for (null): -22
[    82.907] (WW) Falling back to old probe method for modesetting
[    82.907] (WW) Falling back to old probe method for fbdev
[    82.907] (II) Loading sub module "fbdevhw"
[    82.907] (II) LoadModule: "fbdevhw"
[    82.908] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    82.908] (II) Module fbdevhw: vendor="X.Org Foundation"
[    82.908] 	compiled for 1.18.4, module version = 0.0.2
[    82.908] 	ABI class: X.Org Video Driver, version 20.0
[    82.908] (WW) Falling back to old probe method for vesa
[    82.908] (--) intel(0): gen9 engineering sample
[    82.908] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    82.908] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    82.908] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    82.908] (==) intel(0): RGB weight 888
[    82.908] (==) intel(0): Default visual is TrueColor
[    82.909] (II) intel(0): Output eDP1 has no monitor section
[    82.940] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    82.940] (II) intel(0): Enabled output eDP1
[    82.940] (II) intel(0): Output HDMI1 has no monitor section
[    82.940] (II) intel(0): Enabled output HDMI1
[    82.940] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    82.940] (II) intel(0): Output VIRTUAL1 has no monitor section
[    82.940] (II) intel(0): Enabled output VIRTUAL1
[    82.940] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    82.940] (==) intel(0): TearFree disabled
[    82.940] (==) intel(0): DPI set to (96, 96)
[    82.940] (II) Loading sub module "dri2"
[    82.940] (II) LoadModule: "dri2"
[    82.940] (II) Module "dri2" already built-in
[    82.940] (II) Loading sub module "present"
[    82.940] (II) LoadModule: "present"
[    82.940] (II) Module "present" already built-in
[    82.941] (II) UnloadModule: "fbdev"
[    82.941] (II) Unloading fbdev
[    82.941] (II) UnloadSubModule: "fbdevhw"
[    82.941] (II) Unloading fbdevhw
[    82.941] (II) UnloadModule: "vesa"
[    82.941] (II) Unloading vesa
[    82.941] (==) Depth 24 pixmap format is 32 bpp
[    82.941] (II) intel(0): SNA initialized with Skylake (gen9) backend
[    82.941] (==) intel(0): Backing store enabled
[    82.941] (==) intel(0): Silken mouse enabled
[    82.941] (II) intel(0): HW Cursor enabled
[    82.941] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    82.942] (==) intel(0): DPMS enabled
[    82.942] (==) intel(0): Display hotplug detection enabled
[    82.942] (II) intel(0): [DRI2] Setup complete
[    82.942] (II) intel(0): [DRI2]   DRI driver: i965
[    82.942] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    82.942] (II) intel(0): direct rendering: DRI2 enabled
[    82.942] (II) intel(0): hardware support for Present enabled
[    82.942] (--) RandR disabled
[    82.951] (II) SELinux: Disabled on system
[    82.953] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    82.958] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    82.971] (II) intel(0): Setting screen physical size to 508 x 285
[    82.995] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    82.995] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    82.995] (II) LoadModule: "evdev"
[    82.996] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    82.996] (II) Module evdev: vendor="X.Org Foundation"
[    82.996] 	compiled for 1.18.1, module version = 2.10.1
[    82.996] 	Module class: X.Org XInput Driver
[    82.996] 	ABI class: X.Org XInput driver, version 22.1
[    82.996] (II) Using input driver 'evdev' for 'Power Button'
[    82.996] (**) Power Button: always reports core events
[    82.996] (**) evdev: Power Button: Device: "/dev/input/event3"
[    82.996] (--) evdev: Power Button: Vendor 0 Product 0x1
[    82.996] (--) evdev: Power Button: Found keys
[    82.996] (II) evdev: Power Button: Configuring as keyboard
[    82.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    82.996] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    82.996] (**) Option "xkb_rules" "evdev"
[    82.996] (**) Option "xkb_model" "pc105"
[    82.996] (**) Option "xkb_layout" "us"
[    82.996] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    82.996] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    82.996] (II) Using input driver 'evdev' for 'Video Bus'
[    82.996] (**) Video Bus: always reports core events
[    82.996] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    82.996] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    82.996] (--) evdev: Video Bus: Found keys
[    82.996] (II) evdev: Video Bus: Configuring as keyboard
[    82.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[    82.996] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    82.996] (**) Option "xkb_rules" "evdev"
[    82.996] (**) Option "xkb_model" "pc105"
[    82.996] (**) Option "xkb_layout" "us"
[    82.997] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    82.997] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    82.997] (II) Using input driver 'evdev' for 'Video Bus'
[    82.997] (**) Video Bus: always reports core events
[    82.997] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    82.997] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    82.997] (--) evdev: Video Bus: Found keys
[    82.997] (II) evdev: Video Bus: Configuring as keyboard
[    82.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3f/LNXVIDEO:01/input/input8/event6"
[    82.997] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    82.997] (**) Option "xkb_rules" "evdev"
[    82.997] (**) Option "xkb_model" "pc105"
[    82.997] (**) Option "xkb_layout" "us"
[    82.997] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    82.997] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    82.997] (II) Using input driver 'evdev' for 'Power Button'
[    82.997] (**) Power Button: always reports core events
[    82.997] (**) evdev: Power Button: Device: "/dev/input/event1"
[    82.997] (--) evdev: Power Button: Vendor 0 Product 0x1
[    82.997] (--) evdev: Power Button: Found keys
[    82.997] (II) evdev: Power Button: Configuring as keyboard
[    82.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    82.997] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    82.997] (**) Option "xkb_rules" "evdev"
[    82.997] (**) Option "xkb_model" "pc105"
[    82.997] (**) Option "xkb_layout" "us"
[    82.997] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    82.997] (II) No input driver specified, ignoring this device.
[    82.997] (II) This device may have been added with another device file.
[    82.998] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    82.998] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    82.998] (II) Using input driver 'evdev' for 'Sleep Button'
[    82.998] (**) Sleep Button: always reports core events
[    82.998] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    82.998] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    82.998] (--) evdev: Sleep Button: Found keys
[    82.998] (II) evdev: Sleep Button: Configuring as keyboard
[    82.998] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    82.998] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    82.998] (**) Option "xkb_rules" "evdev"
[    82.998] (**) Option "xkb_model" "pc105"
[    82.998] (**) Option "xkb_layout" "us"
[    82.998] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event9)
[    82.998] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    82.998] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[    82.998] (**) Integrated_Webcam_HD: always reports core events
[    82.998] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event9"
[    82.998] (--) evdev: Integrated_Webcam_HD: Vendor 0x1bcf Product 0x2b8a
[    82.998] (--) evdev: Integrated_Webcam_HD: Found keys
[    82.998] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[    82.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10/event9"
[    82.998] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[    82.998] (**) Option "xkb_rules" "evdev"
[    82.998] (**) Option "xkb_model" "pc105"
[    82.998] (**) Option "xkb_layout" "us"
[    82.999] (II) config/udev: Adding input device ELAN1010:00 04F3:3012 Touchpad (/dev/input/event15)
[    82.999] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "evdev touchpad catchall"
[    82.999] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "evdev touchscreen catchall"
[    82.999] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "touchpad catchall"
[    82.999] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "Default clickpad buttons"
[    82.999] (II) LoadModule: "synaptics"
[    82.999] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    82.999] (II) Module synaptics: vendor="X.Org Foundation"
[    82.999] 	compiled for 1.18.1, module version = 1.8.2
[    82.999] 	Module class: X.Org XInput Driver
[    82.999] 	ABI class: X.Org XInput driver, version 22.1
[    82.999] (II) Using input driver 'synaptics' for 'ELAN1010:00 04F3:3012 Touchpad'
[    82.999] (**) ELAN1010:00 04F3:3012 Touchpad: always reports core events
[    82.999] (**) Option "Device" "/dev/input/event15"
[    83.080] (II) synaptics: ELAN1010:00 04F3:3012 Touchpad: found clickpad property
[    83.080] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: x-axis range 0 - 3220 (res 32)
[    83.080] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: y-axis range 0 - 2422 (res 32)
[    83.080] (II) synaptics: ELAN1010:00 04F3:3012 Touchpad: device does not report pressure, will use touch data.
[    83.080] (II) synaptics: ELAN1010:00 04F3:3012 Touchpad: device does not report finger width.
[    83.080] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: buttons: left double triple
[    83.080] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: Vendor 0x4f3 Product 0x3012
[    83.080] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: invalid pressure range.  defaulting to 0 - 255
[    83.080] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: invalid finger width range.  defaulting to 0 - 15
[    83.080] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    83.081] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: touchpad found
[    83.081] (**) ELAN1010:00 04F3:3012 Touchpad: always reports core events
[    83.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-ELAN1010:00/0018:04F3:3012.0001/input/input16/event15"
[    83.112] (II) XINPUT: Adding extended input device "ELAN1010:00 04F3:3012 Touchpad" (type: TOUCHPAD, id 12)
[    83.112] (**) synaptics: ELAN1010:00 04F3:3012 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    83.112] (**) synaptics: ELAN1010:00 04F3:3012 Touchpad: (accel) MaxSpeed is now 1.75
[    83.112] (**) synaptics: ELAN1010:00 04F3:3012 Touchpad: (accel) AccelFactor is now 0.050
[    83.112] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) keeping acceleration scheme 1
[    83.112] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) acceleration profile 1
[    83.112] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) acceleration factor: 2.000
[    83.112] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) acceleration threshold: 4
[    83.113] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: touchpad found
[    83.114] (II) config/udev: Adding input device ELAN1010:00 04F3:3012 Touchpad (/dev/input/mouse1)
[    83.114] (**) ELAN1010:00 04F3:3012 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    83.114] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10)
[    83.114] (II) No input driver specified, ignoring this device.
[    83.114] (II) This device may have been added with another device file.
[    83.115] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    83.115] (II) No input driver specified, ignoring this device.
[    83.115] (II) This device may have been added with another device file.
[    83.115] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    83.116] (II) No input driver specified, ignoring this device.
[    83.116] (II) This device may have been added with another device file.
[    83.116] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    83.116] (II) No input driver specified, ignoring this device.
[    83.116] (II) This device may have been added with another device file.
[    83.117] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    83.117] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    83.117] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    83.117] (**) AT Translated Set 2 keyboard: always reports core events
[    83.117] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    83.117] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    83.117] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    83.117] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    83.117] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    83.117] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    83.117] (**) Option "xkb_rules" "evdev"
[    83.117] (**) Option "xkb_model" "pc105"
[    83.117] (**) Option "xkb_layout" "us"
[    83.118] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[    83.118] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    83.118] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[    83.118] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    83.118] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    83.118] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    83.118] (**) ETPS/2 Elantech Touchpad: always reports core events
[    83.119] (**) Option "Device" "/dev/input/event7"
[    83.184] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3220 (res 31)
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2422 (res 31)
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    83.184] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    83.184] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    83.184] (**) ETPS/2 Elantech Touchpad: always reports core events
[    83.216] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[    83.216] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    83.216] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    83.216] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    83.216] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.050
[    83.216] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    83.216] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    83.216] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    83.216] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    83.216] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    83.217] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    83.217] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    83.220] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event14)
[    83.220] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    83.220] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    83.220] (**) Dell WMI hotkeys: always reports core events
[    83.221] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event14"
[    83.221] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    83.221] (--) evdev: Dell WMI hotkeys: Found keys
[    83.221] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    83.221] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event14"
[    83.221] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[    83.221] (**) Option "xkb_rules" "evdev"
[    83.221] (**) Option "xkb_model" "pc105"
[    83.221] (**) Option "xkb_layout" "us"
[    83.222] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event8)
[    83.222] (**) DELL Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    83.222] (II) Using input driver 'evdev' for 'DELL Wireless hotkeys'
[    83.222] (**) DELL Wireless hotkeys: always reports core events
[    83.222] (**) evdev: DELL Wireless hotkeys: Device: "/dev/input/event8"
[    83.222] (--) evdev: DELL Wireless hotkeys: Vendor 0 Product 0
[    83.222] (--) evdev: DELL Wireless hotkeys: Found keys
[    83.222] (II) evdev: DELL Wireless hotkeys: Configuring as keyboard
[    83.222] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[    83.222] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 16)
[    83.222] (**) Option "xkb_rules" "evdev"
[    83.222] (**) Option "xkb_model" "pc105"
[    83.222] (**) Option "xkb_layout" "us"
[    84.942] (II) intel(0): EDID vendor "BOE", prod id 1583
[    84.942] (II) intel(0): Printing DDC gathered Modelines:
[    84.942] (II) intel(0): Modeline "1920x1080"x0.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[    84.942] (II) intel(0): Modeline "1920x1080"x0.0  113.12  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (52.8 kHz e)

roblm · Post by **roblm** » Sat Jul 29, 2017 8:02 pm

Can you repeat the steps to get the desktop in fallback mode and then post the Xorg.0.log file.

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 8:07 pm

Alright booting with nopgumanager with the nvidia card selected no longer causes the system to hang, but seems to fail to load the driver. I can log in, but cinnamon goes into fallback mode.

Xorg.0.log

Code: Select all

[    18.533] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    18.533] X Protocol Version 11, Revision 0
[    18.533] Build Operating System: Linux 4.4.0-83-generic x86_64 Ubuntu
[    18.533] Current Operating System: Linux crae-Inspiron-7559 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:18:56 UTC 2017 x86_64
[    18.533] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-53-generic root=UUID=c0f60046-214b-4677-a39e-931844bb85ce ro nogpumanager
[    18.533] Build Date: 17 July 2017  05:05:12PM
[    18.533] xorg-server 2:1.18.4-0ubuntu0.3 (For technical support please see http://www.ubuntu.com/support) 
[    18.533] Current version of pixman: 0.33.6
[    18.533] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.533] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.533] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 29 17:04:11 2017
[    18.534] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.541] (==) No Layout section.  Using the first Screen section.
[    18.542] (==) No screen section available. Using defaults.
[    18.542] (**) |-->Screen "Default Screen Section" (0)
[    18.542] (**) |   |-->Monitor "<default monitor>"
[    18.543] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    18.543] (==) Automatically adding devices
[    18.543] (==) Automatically enabling devices
[    18.543] (==) Automatically adding GPU devices
[    18.543] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    18.553] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.553] 	Entry deleted from font path.
[    18.553] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    18.553] 	Entry deleted from font path.
[    18.553] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    18.553] 	Entry deleted from font path.
[    18.554] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    18.554] 	Entry deleted from font path.
[    18.554] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    18.554] 	Entry deleted from font path.
[    18.554] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    18.554] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    18.554] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.555] (II) Loader magic: 0x55dc85a98dc0
[    18.555] (II) Module ABI versions:
[    18.555] 	X.Org ANSI C Emulation: 0.4
[    18.555] 	X.Org Video Driver: 20.0
[    18.555] 	X.Org XInput driver : 22.1
[    18.555] 	X.Org Server Extension : 9.0
[    18.556] (++) using VT number 7

[    18.556] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    18.557] (II) xfree86: Adding drm device (/dev/dri/card1)
[    18.557] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.569] (--) PCI:*(0:0:2:0) 8086:191b:1028:0706 rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    18.569] (--) PCI: (0:2:0:0) 10de:139b:1028:0706 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    18.570] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    18.570] (II) "glx" will be loaded by default.
[    18.570] (II) LoadModule: "glx"
[    18.570] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    18.733] (II) Module glx: vendor="NVIDIA Corporation"
[    18.733] 	compiled for 4.0.2, module version = 1.0.0
[    18.733] 	Module class: X.Org Server Extension
[    18.743] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[    18.743] (==) Matched intel as autoconfigured driver 0
[    18.743] (==) Matched nvidia as autoconfigured driver 1
[    18.743] (==) Matched nouveau as autoconfigured driver 2
[    18.743] (==) Matched intel as autoconfigured driver 3
[    18.743] (==) Matched modesetting as autoconfigured driver 4
[    18.743] (==) Matched fbdev as autoconfigured driver 5
[    18.743] (==) Matched vesa as autoconfigured driver 6
[    18.743] (==) Assigned the driver to the xf86ConfigLayout
[    18.743] (II) LoadModule: "intel"
[    18.744] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    18.750] (II) Module intel: vendor="X.Org Foundation"
[    18.750] 	compiled for 1.18.4, module version = 2.99.917
[    18.750] 	Module class: X.Org Video Driver
[    18.750] 	ABI class: X.Org Video Driver, version 20.0
[    18.750] (II) LoadModule: "nvidia"
[    18.750] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    18.758] (II) Module nvidia: vendor="NVIDIA Corporation"
[    18.758] 	compiled for 4.0.2, module version = 1.0.0
[    18.758] 	Module class: X.Org Video Driver
[    18.758] (II) LoadModule: "nouveau"
[    18.758] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    18.763] (II) Module nouveau: vendor="X.Org Foundation"
[    18.763] 	compiled for 1.18.1, module version = 1.0.12
[    18.763] 	Module class: X.Org Video Driver
[    18.763] 	ABI class: X.Org Video Driver, version 20.0
[    18.763] (II) LoadModule: "modesetting"
[    18.763] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.763] (II) Module modesetting: vendor="X.Org Foundation"
[    18.763] 	compiled for 1.18.4, module version = 1.18.4
[    18.763] 	Module class: X.Org Video Driver
[    18.763] 	ABI class: X.Org Video Driver, version 20.0
[    18.763] (II) LoadModule: "fbdev"
[    18.763] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.771] (II) Module fbdev: vendor="X.Org Foundation"
[    18.771] 	compiled for 1.18.1, module version = 0.4.4
[    18.771] 	Module class: X.Org Video Driver
[    18.771] 	ABI class: X.Org Video Driver, version 20.0
[    18.771] (II) LoadModule: "vesa"
[    18.771] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.772] (II) Module vesa: vendor="X.Org Foundation"
[    18.772] 	compiled for 1.18.1, module version = 2.3.4
[    18.772] 	Module class: X.Org Video Driver
[    18.772] 	ABI class: X.Org Video Driver, version 20.0
[    18.772] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    18.772] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    18.772] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    18.772] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    18.772] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[    18.772] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    18.773] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[    18.773] (II) NOUVEAU driver for NVIDIA chipset families :
[    18.773] 	RIVA TNT        (NV04)
[    18.773] 	RIVA TNT2       (NV05)
[    18.773] 	GeForce 256     (NV10)
[    18.773] 	GeForce 2       (NV11, NV15)
[    18.773] 	GeForce 4MX     (NV17, NV18)
[    18.773] 	GeForce 3       (NV20)
[    18.773] 	GeForce 4Ti     (NV25, NV28)
[    18.773] 	GeForce FX      (NV3x)
[    18.773] 	GeForce 6       (NV4x)
[    18.773] 	GeForce 7       (G7x)
[    18.773] 	GeForce 8       (G8x)
[    18.773] 	GeForce GTX 200 (NVA0)
[    18.773] 	GeForce GTX 400 (NVC0)
[    18.773] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.773] (II) FBDEV: driver for framebuffer: fbdev
[    18.773] (II) VESA: driver for VESA chipsets: vesa
[    18.788] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[    18.788] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[    18.788] (II) intel(0): SNA compiled for use with valgrind
[    18.789] (EE) [drm] Failed to open DRM device for (null): -22
[    18.789] (WW) Falling back to old probe method for modesetting
[    18.789] (WW) Falling back to old probe method for fbdev
[    18.789] (II) Loading sub module "fbdevhw"
[    18.789] (II) LoadModule: "fbdevhw"
[    18.790] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    18.790] (II) Module fbdevhw: vendor="X.Org Foundation"
[    18.790] 	compiled for 1.18.4, module version = 0.0.2
[    18.790] 	ABI class: X.Org Video Driver, version 20.0
[    18.790] (WW) Falling back to old probe method for vesa
[    18.791] (--) intel(0): gen9 engineering sample
[    18.791] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    18.791] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.791] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    18.791] (==) intel(0): RGB weight 888
[    18.791] (==) intel(0): Default visual is TrueColor
[    18.791] (II) intel(0): Output eDP1 has no monitor section
[    18.820] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    18.820] (II) intel(0): Enabled output eDP1
[    18.820] (II) intel(0): Output HDMI1 has no monitor section
[    18.820] (II) intel(0): Enabled output HDMI1
[    18.820] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    18.820] (II) intel(0): Output VIRTUAL1 has no monitor section
[    18.820] (II) intel(0): Enabled output VIRTUAL1
[    18.820] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    18.820] (==) intel(0): TearFree disabled
[    18.820] (==) intel(0): DPI set to (96, 96)
[    18.820] (II) Loading sub module "dri2"
[    18.820] (II) LoadModule: "dri2"
[    18.820] (II) Module "dri2" already built-in
[    18.820] (II) Loading sub module "present"
[    18.820] (II) LoadModule: "present"
[    18.820] (II) Module "present" already built-in
[    18.820] (II) UnloadModule: "fbdev"
[    18.820] (II) Unloading fbdev
[    18.820] (II) UnloadSubModule: "fbdevhw"
[    18.820] (II) Unloading fbdevhw
[    18.820] (II) UnloadModule: "vesa"
[    18.820] (II) Unloading vesa
[    18.820] (==) Depth 24 pixmap format is 32 bpp
[    18.825] (II) intel(0): SNA initialized with Skylake (gen9) backend
[    18.825] (==) intel(0): Backing store enabled
[    18.825] (==) intel(0): Silken mouse enabled
[    18.826] (II) intel(0): HW Cursor enabled
[    18.826] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.827] (==) intel(0): DPMS enabled
[    18.827] (==) intel(0): Display hotplug detection enabled
[    18.827] (II) intel(0): [DRI2] Setup complete
[    18.827] (II) intel(0): [DRI2]   DRI driver: i965
[    18.827] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    18.827] (II) intel(0): direct rendering: DRI2 enabled
[    18.827] (II) intel(0): hardware support for Present enabled
[    18.827] (--) RandR disabled
[    18.830] (II) SELinux: Disabled on system
[    18.832] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    18.834] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    18.851] (II) intel(0): Setting screen physical size to 508 x 285
[    18.908] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    18.908] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.908] (II) LoadModule: "evdev"
[    18.909] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.913] (II) Module evdev: vendor="X.Org Foundation"
[    18.913] 	compiled for 1.18.1, module version = 2.10.1
[    18.913] 	Module class: X.Org XInput Driver
[    18.913] 	ABI class: X.Org XInput driver, version 22.1
[    18.913] (II) Using input driver 'evdev' for 'Power Button'
[    18.913] (**) Power Button: always reports core events
[    18.913] (**) evdev: Power Button: Device: "/dev/input/event3"
[    18.913] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.913] (--) evdev: Power Button: Found keys
[    18.913] (II) evdev: Power Button: Configuring as keyboard
[    18.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    18.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.913] (**) Option "xkb_rules" "evdev"
[    18.913] (**) Option "xkb_model" "pc105"
[    18.913] (**) Option "xkb_layout" "us"
[    18.913] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    18.913] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.913] (II) Using input driver 'evdev' for 'Video Bus'
[    18.913] (**) Video Bus: always reports core events
[    18.913] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    18.913] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.913] (--) evdev: Video Bus: Found keys
[    18.913] (II) evdev: Video Bus: Configuring as keyboard
[    18.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[    18.913] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.913] (**) Option "xkb_rules" "evdev"
[    18.913] (**) Option "xkb_model" "pc105"
[    18.913] (**) Option "xkb_layout" "us"
[    18.913] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    18.913] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.914] (II) Using input driver 'evdev' for 'Video Bus'
[    18.914] (**) Video Bus: always reports core events
[    18.914] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    18.914] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.914] (--) evdev: Video Bus: Found keys
[    18.914] (II) evdev: Video Bus: Configuring as keyboard
[    18.914] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3f/LNXVIDEO:01/input/input8/event6"
[    18.914] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    18.914] (**) Option "xkb_rules" "evdev"
[    18.914] (**) Option "xkb_model" "pc105"
[    18.914] (**) Option "xkb_layout" "us"
[    18.914] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.914] (II) Using input driver 'evdev' for 'Power Button'
[    18.914] (**) Power Button: always reports core events
[    18.914] (**) evdev: Power Button: Device: "/dev/input/event1"
[    18.914] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.914] (--) evdev: Power Button: Found keys
[    18.914] (II) evdev: Power Button: Configuring as keyboard
[    18.914] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    18.914] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    18.914] (**) Option "xkb_rules" "evdev"
[    18.914] (**) Option "xkb_model" "pc105"
[    18.914] (**) Option "xkb_layout" "us"
[    18.914] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    18.914] (II) No input driver specified, ignoring this device.
[    18.914] (II) This device may have been added with another device file.
[    18.914] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    18.914] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    18.914] (II) Using input driver 'evdev' for 'Sleep Button'
[    18.914] (**) Sleep Button: always reports core events
[    18.914] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    18.914] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    18.914] (--) evdev: Sleep Button: Found keys
[    18.914] (II) evdev: Sleep Button: Configuring as keyboard
[    18.914] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    18.914] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    18.914] (**) Option "xkb_rules" "evdev"
[    18.914] (**) Option "xkb_model" "pc105"
[    18.914] (**) Option "xkb_layout" "us"
[    18.915] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event9)
[    18.915] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    18.915] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[    18.915] (**) Integrated_Webcam_HD: always reports core events
[    18.915] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event9"
[    18.915] (--) evdev: Integrated_Webcam_HD: Vendor 0x1bcf Product 0x2b8a
[    18.915] (--) evdev: Integrated_Webcam_HD: Found keys
[    18.915] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[    18.915] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10/event9"
[    18.915] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[    18.915] (**) Option "xkb_rules" "evdev"
[    18.915] (**) Option "xkb_model" "pc105"
[    18.915] (**) Option "xkb_layout" "us"
[    18.915] (II) config/udev: Adding input device ELAN1010:00 04F3:3012 Touchpad (/dev/input/event15)
[    18.915] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "evdev touchpad catchall"
[    18.915] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "evdev touchscreen catchall"
[    18.915] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "touchpad catchall"
[    18.915] (**) ELAN1010:00 04F3:3012 Touchpad: Applying InputClass "Default clickpad buttons"
[    18.915] (II) LoadModule: "synaptics"
[    18.915] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.916] (II) Module synaptics: vendor="X.Org Foundation"
[    18.916] 	compiled for 1.18.1, module version = 1.8.2
[    18.916] 	Module class: X.Org XInput Driver
[    18.917] 	ABI class: X.Org XInput driver, version 22.1
[    18.917] (II) Using input driver 'synaptics' for 'ELAN1010:00 04F3:3012 Touchpad'
[    18.917] (**) ELAN1010:00 04F3:3012 Touchpad: always reports core events
[    18.917] (**) Option "Device" "/dev/input/event15"
[    19.012] (II) synaptics: ELAN1010:00 04F3:3012 Touchpad: found clickpad property
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: x-axis range 0 - 3220 (res 32)
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: y-axis range 0 - 2422 (res 32)
[    19.012] (II) synaptics: ELAN1010:00 04F3:3012 Touchpad: device does not report pressure, will use touch data.
[    19.012] (II) synaptics: ELAN1010:00 04F3:3012 Touchpad: device does not report finger width.
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: buttons: left double triple
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: Vendor 0x4f3 Product 0x3012
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: invalid pressure range.  defaulting to 0 - 255
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: invalid finger width range.  defaulting to 0 - 15
[    19.012] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    19.012] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: touchpad found
[    19.012] (**) ELAN1010:00 04F3:3012 Touchpad: always reports core events
[    19.044] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-ELAN1010:00/0018:04F3:3012.0001/input/input16/event15"
[    19.044] (II) XINPUT: Adding extended input device "ELAN1010:00 04F3:3012 Touchpad" (type: TOUCHPAD, id 12)
[    19.044] (**) synaptics: ELAN1010:00 04F3:3012 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    19.044] (**) synaptics: ELAN1010:00 04F3:3012 Touchpad: (accel) MaxSpeed is now 1.75
[    19.044] (**) synaptics: ELAN1010:00 04F3:3012 Touchpad: (accel) AccelFactor is now 0.050
[    19.044] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) keeping acceleration scheme 1
[    19.044] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) acceleration profile 1
[    19.044] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) acceleration factor: 2.000
[    19.044] (**) ELAN1010:00 04F3:3012 Touchpad: (accel) acceleration threshold: 4
[    19.044] (--) synaptics: ELAN1010:00 04F3:3012 Touchpad: touchpad found
[    19.044] (II) config/udev: Adding input device ELAN1010:00 04F3:3012 Touchpad (/dev/input/mouse1)
[    19.044] (**) ELAN1010:00 04F3:3012 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    19.045] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10)
[    19.045] (II) No input driver specified, ignoring this device.
[    19.045] (II) This device may have been added with another device file.
[    19.045] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    19.045] (II) No input driver specified, ignoring this device.
[    19.045] (II) This device may have been added with another device file.
[    19.045] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    19.045] (II) No input driver specified, ignoring this device.
[    19.045] (II) This device may have been added with another device file.
[    19.045] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    19.045] (II) No input driver specified, ignoring this device.
[    19.045] (II) This device may have been added with another device file.
[    19.045] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    19.045] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.045] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.045] (**) AT Translated Set 2 keyboard: always reports core events
[    19.045] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    19.045] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.045] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.045] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.045] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    19.045] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    19.045] (**) Option "xkb_rules" "evdev"
[    19.045] (**) Option "xkb_model" "pc105"
[    19.045] (**) Option "xkb_layout" "us"
[    19.046] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[    19.046] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    19.046] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[    19.046] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    19.046] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    19.046] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    19.046] (**) ETPS/2 Elantech Touchpad: always reports core events
[    19.046] (**) Option "Device" "/dev/input/event7"
[    19.108] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3220 (res 31)
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2422 (res 31)
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    19.108] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    19.108] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    19.108] (**) ETPS/2 Elantech Touchpad: always reports core events
[    19.140] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[    19.140] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    19.140] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    19.140] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    19.140] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.050
[    19.140] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    19.140] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    19.140] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    19.140] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    19.140] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    19.140] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    19.140] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    19.141] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event14)
[    19.141] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    19.141] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    19.141] (**) Dell WMI hotkeys: always reports core events
[    19.141] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event14"
[    19.141] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    19.141] (--) evdev: Dell WMI hotkeys: Found keys
[    19.141] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    19.141] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event14"
[    19.141] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[    19.141] (**) Option "xkb_rules" "evdev"
[    19.141] (**) Option "xkb_model" "pc105"
[    19.141] (**) Option "xkb_layout" "us"
[    19.141] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event8)
[    19.141] (**) DELL Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    19.141] (II) Using input driver 'evdev' for 'DELL Wireless hotkeys'
[    19.141] (**) DELL Wireless hotkeys: always reports core events
[    19.141] (**) evdev: DELL Wireless hotkeys: Device: "/dev/input/event8"
[    19.141] (--) evdev: DELL Wireless hotkeys: Vendor 0 Product 0
[    19.141] (--) evdev: DELL Wireless hotkeys: Found keys
[    19.141] (II) evdev: DELL Wireless hotkeys: Configuring as keyboard
[    19.141] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[    19.141] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 16)
[    19.141] (**) Option "xkb_rules" "evdev"
[    19.141] (**) Option "xkb_model" "pc105"
[    19.141] (**) Option "xkb_layout" "us"
[    20.822] (II) intel(0): EDID vendor "BOE", prod id 1583
[    20.822] (II) intel(0): Printing DDC gathered Modelines:
[    20.822] (II) intel(0): Modeline "1920x1080"x0.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[    20.822] (II) intel(0): Modeline "1920x1080"x0.0  113.12  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (52.8 kHz e)

roblm · Post by **roblm** » Sat Jul 29, 2017 8:16 pm

Is the desktop in fallback mode now? That log file shows the Intel GPU is enabled.

Use this command again to rename the xorg.conf.07282017 file to xorg.conf:

Code: Select all

sudo mv /etc/X11/xorg.conf.07282017 /etc/X11/xorg.conf

Then select the Nvidia GPU, log out and back in and then post the log file, while the desktop is in fallback mode.

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 8:21 pm

Alright after renaming to xorg.conf and relogging the system hung again. Here is the Xorg.0.log.log, which should be for that.

Code: Select all

[   824.689] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[   824.689] X Protocol Version 11, Revision 0
[   824.689] Build Operating System: Linux 4.4.0-83-generic x86_64 Ubuntu
[   824.689] Current Operating System: Linux crae-Inspiron-7559 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:18:56 UTC 2017 x86_64
[   824.689] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-53-generic root=UUID=c0f60046-214b-4677-a39e-931844bb85ce ro nogpumanager
[   824.689] Build Date: 17 July 2017  05:05:12PM
[   824.689] xorg-server 2:1.18.4-0ubuntu0.3 (For technical support please see http://www.ubuntu.com/support) 
[   824.689] Current version of pixman: 0.33.6
[   824.689] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   824.689] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   824.689] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 29 17:17:37 2017
[   824.689] (==) Using config file: "/etc/X11/xorg.conf"
[   824.689] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   824.691] (==) ServerLayout "layout"
[   824.691] (**) |-->Screen "nvidia" (0)
[   824.691] (**) |   |-->Monitor "<default monitor>"
[   824.691] (**) |   |-->Device "nvidia"
[   824.691] (**) |   |-->GPUDevice "nvidia"
[   824.691] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[   824.691] (**) |-->Inactive Device "intel"
[   824.691] (==) Automatically adding devices
[   824.691] (==) Automatically enabling devices
[   824.691] (==) Automatically adding GPU devices
[   824.691] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   824.691] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   824.691] 	Entry deleted from font path.
[   824.691] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   824.691] 	Entry deleted from font path.
[   824.691] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   824.691] 	Entry deleted from font path.
[   824.691] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   824.691] 	Entry deleted from font path.
[   824.691] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   824.691] 	Entry deleted from font path.
[   824.691] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[   824.691] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   824.691] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   824.691] (II) Loader magic: 0x55dc8148adc0
[   824.691] (II) Module ABI versions:
[   824.691] 	X.Org ANSI C Emulation: 0.4
[   824.691] 	X.Org Video Driver: 20.0
[   824.691] 	X.Org XInput driver : 22.1
[   824.691] 	X.Org Server Extension : 9.0
[   824.693] (++) using VT number 7

[   824.693] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   824.694] (II) xfree86: Adding drm device (/dev/dri/card1)
[   824.694] (II) xfree86: Adding drm device (/dev/dri/card0)
[   824.702] (--) PCI:*(0:0:2:0) 8086:191b:1028:0706 rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   824.702] (--) PCI: (0:2:0:0) 10de:139b:1028:0706 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   824.702] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[   824.702] (II) "glx" will be loaded by default.
[   824.702] (II) LoadModule: "glx"
[   824.702] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[   824.710] (II) Module glx: vendor="NVIDIA Corporation"
[   824.710] 	compiled for 4.0.2, module version = 1.0.0
[   824.710] 	Module class: X.Org Server Extension
[   824.710] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[   824.710] (II) LoadModule: "nvidia"
[   824.710] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[   824.711] (II) Module nvidia: vendor="NVIDIA Corporation"
[   824.711] 	compiled for 4.0.2, module version = 1.0.0
[   824.711] 	Module class: X.Org Video Driver
[   824.711] (II) LoadModule: "modesetting"
[   824.711] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   824.711] (II) Module modesetting: vendor="X.Org Foundation"
[   824.711] 	compiled for 1.18.4, module version = 1.18.4
[   824.711] 	Module class: X.Org Video Driver
[   824.711] 	ABI class: X.Org Video Driver, version 20.0
[   824.711] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[   824.711] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   824.711] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   824.713] (II) Loading sub module "fb"
[   824.713] (II) LoadModule: "fb"
[   824.713] (II) Loading /usr/lib/xorg/modules/libfb.so
[   824.714] (II) Module fb: vendor="X.Org Foundation"
[   824.714] 	compiled for 1.18.4, module version = 1.0.0
[   824.714] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   824.714] (II) Loading sub module "wfb"
[   824.714] (II) LoadModule: "wfb"
[   824.714] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   824.715] (II) Module wfb: vendor="X.Org Foundation"
[   824.715] 	compiled for 1.18.4, module version = 1.0.0
[   824.715] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   824.715] (II) Loading sub module "ramdac"
[   824.715] (II) LoadModule: "ramdac"
[   824.715] (II) Module "ramdac" already built-in
[   824.732] (II) modeset(G0): using drv /dev/dri/card0
[   824.733] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[   824.733] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   824.733] (==) NVIDIA(0): RGB weight 888
[   824.733] (==) NVIDIA(0): Default visual is TrueColor
[   824.733] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   824.734] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[   824.734] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
[   824.734] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[   824.734] (**) NVIDIA(0): Enabling 2D acceleration
[   824.950] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:2:0:0 (GPU-0)
[   824.950] (--) NVIDIA(0): Memory: 4194304 kBytes
[   824.950] (--) NVIDIA(0): VideoBIOS: 82.07.7a.00.19
[   824.950] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   824.950] (II) NVIDIA(0): Validated MetaModes:
[   824.950] (II) NVIDIA(0):     "NULL"
[   824.950] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   824.950] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   824.950] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   824.950] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[   824.950] (**) modeset(G0): Option "AccelMethod" "None"
[   824.950] (==) modeset(G0): RGB weight 888
[   824.950] (==) modeset(G0): Default visual is TrueColor
[   824.950] (**) modeset(G0): glamor disabled
[   824.950] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[   824.951] (II) modeset(G0): Output eDP-1-1 has no monitor section
[   824.952] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[   824.953] (II) modeset(G0): EDID for output eDP-1-1
[   824.953] (II) modeset(G0): Manufacturer: BOE  Model: 62f  Serial#: 0
[   824.953] (II) modeset(G0): Year: 2015  Week: 1
[   824.953] (II) modeset(G0): EDID Version: 1.4
[   824.953] (II) modeset(G0): Digital Display Input
[   824.953] (II) modeset(G0): 6 bits per channel
[   824.953] (II) modeset(G0): Digital interface is DisplayPort
[   824.953] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   824.953] (II) modeset(G0): Gamma: 2.20
[   824.953] (II) modeset(G0): No DPMS capabilities specified
[   824.953] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   824.953] (II) modeset(G0): First detailed timing is preferred mode
[   824.954] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[   824.954] (II) modeset(G0): redX: 0.590 redY: 0.350   greenX: 0.329 greenY: 0.555
[   824.954] (II) modeset(G0): blueX: 0.152 blueY: 0.118   whiteX: 0.312 whiteY: 0.328
[   824.954] (II) modeset(G0): Manufacturer's mask: 0
[   824.954] (II) modeset(G0): Supported detailed timing:
[   824.954] (II) modeset(G0): clock: 141.4 MHz   Image Size:  344 x 194 mm
[   824.954] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2142 h_border: 0
[   824.954] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1100 v_border: 0
[   824.954] (II) modeset(G0): Supported detailed timing:
[   824.954] (II) modeset(G0): clock: 113.1 MHz   Image Size:  344 x 194 mm
[   824.954] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2142 h_border: 0
[   824.954] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1100 v_border: 0
[   824.954] (II) modeset(G0):  YHDGT\80NV15N41
[   824.954] (II) modeset(G0): Unknown vendor-specific block 0
[   824.954] (II) modeset(G0): EDID (in hex):
[   824.954] (II) modeset(G0): 	00ffffffffffff0009e52f0600000000
[   824.954] (II) modeset(G0): 	01190104952213780a24109759548e27
[   824.954] (II) modeset(G0): 	1e505400000001010101010101010101
[   824.954] (II) modeset(G0): 	0101010101013c3780de703814403020
[   824.954] (II) modeset(G0): 	360058c21000001a302c80de70381440
[   824.954] (II) modeset(G0): 	3020360058c21000001a000000fe0059
[   824.954] (II) modeset(G0): 	48444754804e5631354e343100000000
[   824.954] (II) modeset(G0): 	0000411196000000000a010a2020006a
[   824.954] (II) modeset(G0): Printing probed modes for output eDP-1-1
[   824.954] (II) modeset(G0): Modeline "1920x1080"x60.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[   824.954] (II) modeset(G0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[   824.954] (II) modeset(G0): Modeline "1920x1080"x48.0  113.12  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (52.8 kHz e)
[   824.954] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   824.954] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   824.954] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[   824.954] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   824.954] (II) modeset(G0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   824.954] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   824.954] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   824.954] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   824.954] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   824.954] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   824.954] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   824.954] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   824.954] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[   824.954] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   824.954] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   824.954] (II) modeset(G0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[   824.954] (II) modeset(G0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[   824.954] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   824.954] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   824.954] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   824.954] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   824.955] (II) modeset(G0): EDID for output HDMI-1-1
[   824.955] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   824.955] (==) modeset(G0): DPI set to (96, 96)
[   824.955] (II) Loading sub module "fb"
[   824.955] (II) LoadModule: "fb"
[   824.956] (II) Loading /usr/lib/xorg/modules/libfb.so
[   824.956] (II) Module fb: vendor="X.Org Foundation"
[   824.956] 	compiled for 1.18.4, module version = 1.0.0
[   824.956] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   824.956] (II) Loading sub module "shadow"
[   824.956] (II) LoadModule: "shadow"
[   824.956] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   824.956] (II) Module shadow: vendor="X.Org Foundation"
[   824.956] 	compiled for 1.18.4, module version = 1.1.0
[   824.956] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   824.956] (--) Depth 24 pixmap format is 32 bpp
[   824.956] (==) modeset(G0): Backing store enabled
[   824.956] (==) modeset(G0): Silken mouse enabled
[   824.956] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   824.956] (==) modeset(G0): DPMS enabled
[   824.956] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[   824.956] (WW) modeset(G0): Option "IgnoreDisplayDevices" is not used
[   825.219] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[   825.219] (II) NVIDIA:     access.
[   829.241] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[   829.241] (II) NVIDIA(0): Setting mode "NULL"

roblm · Post by **roblm** » Sat Jul 29, 2017 8:37 pm

That log file looks identical to the one in your third post. The configuration looks OK and should work. I'm stumped right now. Your problem is a little different from other similar topics I've been involved with dealing with Optimus systems. I'll have to think everything over. However, I'm quitting for tonight and won't be online again until tomorrow morning.

Christo6 · Post by **Christo6** » Sat Jul 29, 2017 8:38 pm

No worries. I am going to install windows on the computer and see if the nvidia card works on there. If not it is probably a hardware problem. Will post about it later.

Edit:
After installing windows it seems to be having similar problems with the nvidia driver. I am fairly certain it is a hardware issue. Windows loads the driver, but when trying to use the card it freezes up. Thank you for your help, I will probably be able to get the driver working again once I get the card replaced.

deeahtee · Post by **deeahtee** » Sat Oct 07, 2017 3:50 pm

Posting just to see if anyone was able to resolve this issue. Have had extremely similar issues for the past few months.

Linux Mint Forums

Dell Inspiron 7559 Proprietary Graphics Driver Installation

Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation

Re: Dell Inspiron 7559 Proprietary Graphics Driver Installation