Solve boot problems with AMD and NVIDIA graphics cards

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help
fruitkiller
Level 4
Level 4
Posts: 411
Joined: Tue Aug 05, 2014 7:52 pm

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by fruitkiller » Wed Jan 31, 2018 5:43 pm

Some might have encountered my problems with my long-standing Mint 17.3 partition, which started as 17, then 17.1, 17.2, 17.3. Along the way the 15.30.1025 AMD driver for my Radeon HD 7850 stopped working, one of those times I pressed the power button, and X crashed at boot. It says I'm still using it, although, that install is messed up, it recognizes it, but opengl isn't installed and typing fglrxinfo gives one an error saying it's not installed. Then after that QT and some KDE applications stopped working. On terminal they all said "Segfault". So, I installed Mint 17.1 from a fresh iso on another old 200gb WD drive that refuses to break since 2005....back then they didn't have colour "codes", they were all black text on them, on those first SATA drives.

Anyway, I went my merry way and successfully installed the 15.30.1025 driver on it. But sometime, when I installed a program from backup using Aptik, it installed many X related packages and inevitably the X refused to open, segfault error happened. So I'm now in there, reinstalling, uninstalling and installing, and it won't install anymore.

So segfault, I did a memtest and although I couldn't find the 2 pass option, which is weird, I did a complete test and it found some errors. This is Corsair memory, it's supposed to be high quality right? Better than Kingston memory by miles, right? I have 16gb of ram, as 2 packs of 2 Corsair Vengeance DDR3 1866mhz memory. Am I really to the point where one of the memory slots could be broken? Or a memory stick being half broken? Because typically, the BIOS detects faulty memory with a typical sequence of beeps, but I get none of that. The only error I get sometimes is that I have an Overclock error and to press F1 to enter BIOS and repair it, although I have not overclocked anything, even if I have quite the cooling system and a chip made for that (AMDFX8350 Black Edition 8 cores). Some have told me to swap around the brackets and do a memtest again, I really hate messing around with mem sticks, especially these, it would seem the big handles on those Corsairs sticks help, but, really they don't help one with big fingers/hands all that much and it obscures the slots a lot more than regular boring green small brackets. But is that where I am now, looking for a faulty mem stick(s) ? Because I have definitely tried everything and as soon as some packages get installed the driver gets broken. If I start Audacious-Qt in this 17.1 install, it does start but if I start the Visualization it will crash. While it worked before installing a program that drags along a lot of packages, or pre-installing packages to compile my own ffmpeg (I always do that). Situation's confusing for sure. Right now though the error is different than in my "main" Mint install, the 17.3 one I stuck around with for so long despite being broken in so many ways, as long the basics were working and openvpn worked, it was fine, I can use regular Audacious and other IRC programs and different programs for other purposes, although I find them inferior than what I truly want, like what was I considered my perfect built (the one that started with 17 through 17.3). Before asking for inxi...look at my previous posts if you feel so inclined. I think it's now down to a single point of hardware failure. Hopefully not the memory inside the gpu.

edit : I just remembered, what broke the Mint 17.1 install was me installing that new kernel that was available in the updates along with the headers. It was 3.13.0.141 and even going back to 3.13.0-27 which is the kernel that came with the iso I downloaded from the site and verified with the key as conform. After that and all what that installed, including gcc 4.8, where gcc 4.6 I think was there previously from the clean install. Maybe not installing linux-firmware was a bad idea, should I install it? Maybe it needs it to work with my gpu? Anyways, I found what broke the driver, similar to what I think happened sometimes when updating the 17.3 built, which survived 17->17.1->17.2->17.3 (although I had to reinstall the driver for 17.3 when it was new, gave me the same X server crash, although not sure it was a segfault, as I was able to install it again easily.

fruitkiller
Level 4
Level 4
Posts: 411
Joined: Tue Aug 05, 2014 7:52 pm

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by fruitkiller » Thu Feb 01, 2018 3:40 am

I want to make a new post because I finally figured it out after some lucky search results when using the error I would get after installing the driver using .deb packages I made from the .run file. It worked even without rebooting, although my sound cards disappeared so I had to reboot and I was lucky, they all came back and now I'm wowed by the quality of the colour again and how smooth it goes and no error when typing in fglrxinfo.

I found a pastebin link with my issue and somehow how to repair it : https://pastebin.com/CQT13yni

So, I did this :

Code: Select all

user@debian-desktop:~$ fglrxinfo | grep renderingXlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual!
 
user@debian-desktop:~$ compiz --replace
Unlike that person's pastebin results, I got something different, it said things about my gpu and some errors, like, the bottom panel had teleported to the top of the screen and windows lost their 3 buttons at the upper right (I'm using MATE). So I manage to get the panel back at the bottom, but with the sound cards having disappeared and no icons in the windows, I rebooted and now fglrxinfo gives the info it should and Catalyst works again :

Code: Select all

display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 7800 Series  
OpenGL version string: 4.5.13416 Compatibility Profile Context 15.30.1025
So, right now I'm not going to mess around with kernels, even though I'm using kernel 3.13, it's the very latest kernel 3.13. Not risking it, I'll try to see if I can game later when I install CrossOver or Wine, dunno if I'll install CrossOver right away. This is a way to make it work, I wonder if it would in my 17.3 partition, I will try, I don't think I ever used deb files created from the .run installation file before, or if I did, it didn't work once installed.

The Visualizations in Audacious work, and the plugin is called openGL visualization so I guess it's there for good.

Krustenviech
Level 1
Level 1
Posts: 7
Joined: Sun Mar 18, 2018 11:05 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by Krustenviech » Tue Mar 20, 2018 6:39 pm

Hi.
How would i act, if i got a black screen and stuck mouse after login?

I can access the EFI Bootmenu and also get to console.

Intel® Core™ i7-6700HQ Prozessor
NVIDIA® GeForce® GTX 970M (3 GB)
Linux Mint 18.3 Cinnamon
Linux Mint fresh installation and only OS on my system now.

Remus
Level 1
Level 1
Posts: 7
Joined: Wed Jun 25, 2014 6:28 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by Remus » Thu Mar 22, 2018 3:32 pm

Thanks for the help in advance.

I have a similar problem. I am trying to give 18.3 a trial alongside of win 10. I manage to UEFI boot from the thumb drive. I get the options and followed the instructions at the start of this thread.
I chose compatibility mode and held down the 'Left Shift' key. All the coding appeared which promptly scrolled to the very bottom and did not let me edit using the 'e' key, instead something like hieroglyphics or fragments of writing appeared as it continued to boot into Mint. I know this as the sound was turned on.

Is there a way I can halt the load process until I have edited and added the 'nomodeset' into the command line?

Intel i7 6700, Nvidia GTX 970

I am considering building a stock Linux pc without card if this does not work

woxof
Level 1
Level 1
Posts: 7
Joined: Tue Mar 27, 2018 8:27 pm

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by woxof » Tue Mar 27, 2018 10:06 pm

Thank you Xenopeek! Used your solution to install Mint on a Dell optiplex 380 (nvidia card).

krepsen
Level 1
Level 1
Posts: 2
Joined: Fri Apr 06, 2018 6:43 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by krepsen » Fri Apr 06, 2018 7:04 am

Trying to install mint 18 cinnamon on a HP Z6 computer (no windows/clean install) - I manage to install Linux by replacing "splash quiet" with "nomodeset".
However, I cannot enter the "second GRUB" after rebooting post-installation - hence I cannot replace the splash quiet" with "nomodeset" in the "second GRUB" = black screen after booting bios.

Did this on a HP Z240 and was able to open the grub menu to replace the "splash quiet" to "nomodeset" after install. However, for the Z6 I cannot get it to start the grub menu.

I have tried holding SHIFT (both left and right) multiple times, also tried booting directly from bios (the usb) but that will only allow me to enter the first grub menu (the grub menu for the live disk).
Is there another way to get the grub menu (for the hard disk)?

EDIT: as suggested - I've posted this question in a new thread.New thread
Last edited by krepsen on Fri Apr 06, 2018 7:53 am, edited 1 time in total.

User avatar
Moem
Level 19
Level 19
Posts: 9388
Joined: Tue Nov 17, 2015 9:14 am
Location: The Netherlands
Contact:

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by Moem » Fri Apr 06, 2018 7:33 am

krepsen wrote:
Fri Apr 06, 2018 7:04 am
Is there another way to get the grub menu (for the hard disk)?
I would recommend asking that question in a separate thread, instead of at the tail of a very long one. It'll be much more easily noticed.
Image

If your issue is solved, kindly indicate that by editing the first post in the topic, and adding [SOLVED] to the title. Thanks!

User avatar
karlchen
Level 20
Level 20
Posts: 11343
Joined: Sat Dec 31, 2011 7:21 am
Location: Germany

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by karlchen » Mon Aug 13, 2018 11:37 am

<moderator on>
Split off sandyihb67's post and turned into a separate thread, Machine does not boot normally, cannot load AMD graphic driver, because sandyihb67's problem seems to be particularly complex.
~~
Split off verlen's post and turned into a separate thread, Elitebook 8530w: Mint 19 and problems with NVidia driver.
</moderator off>
Image
Linux Mint 19.2 32-bit xfce Desktop, Total Commander 9.22a 32-bit
Haß gleicht einer Krankheit, dem Miserere, wo man vorne herausgibt, was eigentlich hinten wegsollte. (Goethe)

blanco12
Level 1
Level 1
Posts: 14
Joined: Wed Jul 18, 2018 5:02 pm

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by blanco12 » Mon Aug 27, 2018 1:39 am

It is unlikely but I did find a similar issue that had been discussed elsewhere; considering you already had windows installed it could be that it wants to use some default screen resolution or other screen settings from your previous configuration prior to the time that the OS is loaded and and with the current setup it is unable to do that and thus for whatever reason is prevented from booting. Whether it be due to the a problem on the port, monitor or cable or the settings on the OS itself Additionally there is no harm in trying the other DVI port & the HDMI port just to eliminate it as a potentially faulty port.

sayto2018
Level 1
Level 1
Posts: 1
Joined: Sun Oct 14, 2018 5:24 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by sayto2018 » Sun Oct 14, 2018 5:26 am

Thank you people for this thread it is really useful for me, thank you again!

mihalan
Level 1
Level 1
Posts: 5
Joined: Tue Dec 25, 2018 10:13 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by mihalan » Wed Jan 02, 2019 4:46 pm

Hello.

The dual boot was installed on the PC: win + mint 18.3. Win works fine, but I didn’t go to mint for several months, and now when trying to enter the system black screen appears - it doesn’t response to either the “ctrl + alt_f1” or the “ctrl + alt + del”, the monitor (dell u2415) goes to power saving mode, further only "soft reset".
Created a liveCD (on flash drive) with Cinnamon mint 19, 19.1, 18.3 - the situation is similar - the standard boot crashes.
Systems (live and standard) are loaded only with the "nomodeset" parameter in grub. If I remove in "recovery mode" in grub "nomodeset" the system will fall.
Loaded into the standard mint with "nomodeset", executed the command to load into the console without a graphic system "systemctl set-default multi-user.target", all the same with the standard boot, the system crashes, it is loaded into the console only with the "nomodeset" parameter.

Reinstalled 19.1, nothing has changed. It is expected, because the live image behaves similarly. Video card radeon HD 6850.
I tried to boot into the "recovery - console" mode to reconfigure the X server - errors occur (enclose the full log below).
[53.071] (EE) Backtrace:
[53.072] (EE) 0: / usr / lib / xorg / Xorg (xorg_backtrace + 0x4d) [0x55bf9695b8cd]
[53.072] (EE) 1: / usr / lib / xorg / Xorg (0x55bf967a3000 + 0x1bc669) [0x55bf9695f669]


In "/etc/modprobe.d" created modprobe.conf with the contents of "options radeon modeset = 1" - the system stops booting even in recovery mode.

In general, I do not expect more than the standard X radeon driver for this card (https://www.x.org/wiki/radeon/), especially as I understand since fglrx will not work on mint>=18.

Is it possible to work without "nomodeset" option on my old hardware configuration?

p.s. Sorry for my English.

INXI

Code: Select all

System:
  Host: bg-workstation Kernel: 4.15.0-20-generic x86_64 bits: 64 
  compiler: gcc v: 7.3.0 Desktop: Cinnamon 4.0.8 
  Distro: Linux Mint 19.1 Tessa base: Ubuntu 18.04 bionic 
Machine:
  Type: Desktop Mobo: Gigabyte model: GA-970A-UD3 serial: <filter> 
  BIOS: Award v: F7 date: 10/22/2012 
CPU:
  Topology: Dual Core model: AMD Phenom II X2 555 bits: 64 type: MCP 
  arch: K10 rev: 3 L2 cache: 1024 KiB 
  flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 15301 
  Speed: 800 MHz min/max: 800/3800 MHz Core speeds (MHz): 1: 800 2: 800 
Graphics:
  Device-1: AMD Barts PRO [Radeon HD 6850] vendor: Micro-Star MSI 
  driver: N/A bus ID: 01:00.0 
  Display: x11 server: X.Org 1.19.6 driver: ati,vesa 
  unloaded: fbdev,modesetting,radeon resolution: 1600x1200~N/A 
  OpenGL: renderer: llvmpipe (LLVM 6.0 128 bits) v: 3.3 Mesa 18.0.5 
  direct render: Yes 
Audio:
  Device-1: AMD SBx00 Azalia vendor: Gigabyte driver: snd_hda_intel 
  v: kernel bus ID: 00:14.2 
  Device-2: AMD Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM] 
  vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1 
  Device-3: Creative Labs EMU20k2 [Sound Blaster X-Fi Titanium Series] 
  driver: snd_ctxfi v: kernel bus ID: 03:00.0 
  Device-4: Logitech HD Webcam C525 type: USB driver: snd-usb-audio,uvcvideo 
  bus ID: 3-4:3 
  Sound Server: ALSA v: k4.15.0-20-generic 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Gigabyte driver: r8169 v: 2.3LK-NAPI port: ce00 bus ID: 04:00.0 
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 592.49 GiB used: 5.98 GiB (1.0%) 
  ID-1: /dev/sda vendor: Western Digital model: WD5000AAKX-001CA0 
  size: 465.76 GiB 
  ID-2: /dev/sdb vendor: OCZ model: ARC100 size: 111.79 GiB 
  ID-3: /dev/sdc type: USB vendor: Generic model: Flash Disk size: 14.94 GiB 
Partition:
  ID-1: / size: 99.42 GiB used: 5.92 GiB (6.0%) fs: ext4 dev: /dev/sda5 
  ID-2: swap-1 size: 2.92 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda6 
Sensors:
  System Temperatures: cpu: 25.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 172 Uptime: 3m Memory: 11.72 GiB used: 679.2 MiB (5.7%) 
  Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19 
  inxi: 3.0.27

Xorg.0_recovery_X-configure.log

Code: Select all

[    51.628] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    51.628] X Protocol Version 11, Revision 0
[    51.628] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[    51.628] Current Operating System: Linux bg-workstation 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64
[    51.628] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=68cccde5-9739-4dc4-9cde-224b8b13a0ba ro recovery nomodeset
[    51.628] Build Date: 25 October 2018  04:11:27PM
[    51.628] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[    51.628] Current version of pixman: 0.34.0
[    51.629] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    51.629] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    51.629] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 22 22:47:15 2018
[    51.630] (II) Loader magic: 0x55bf96bea020
[    51.630] (II) Module ABI versions:
[    51.630] 	X.Org ANSI C Emulation: 0.4
[    51.630] 	X.Org Video Driver: 23.0
[    51.630] 	X.Org XInput driver : 24.1
[    51.630] 	X.Org Server Extension : 10.0
[    51.807] (--) using VT number 2

[    51.807] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    51.809] (--) PCI:*(0:1:0:0) 1002:6739:1462:2441 rev 0, Mem @ 0xd0000000/268435456, 0xfd3c0000/131072, I/O @ 0x0000ae00/256, BIOS @ 0x????????/131072
[    51.816] List of video drivers:
[    51.816] 	amdgpu
[    51.817] 	ati
[    51.817] 	intel
[    51.817] 	nouveau
[    51.817] 	qxl
[    51.817] 	radeon
[    51.817] 	vmware
[    51.817] 	vesa
[    51.817] 	fbdev
[    51.817] 	modesetting
[    51.817] (II) LoadModule: "amdgpu"
[    51.827] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    51.866] (II) Module amdgpu: vendor="X.Org Foundation"
[    51.866] 	compiled for 1.19.6, module version = 18.0.1
[    51.866] 	Module class: X.Org Video Driver
[    51.866] 	ABI class: X.Org Video Driver, version 23.0
[    51.866] (II) LoadModule: "ati"
[    51.866] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    51.866] (II) Module ati: vendor="X.Org Foundation"
[    51.866] 	compiled for 1.19.6, module version = 18.0.1
[    51.866] 	Module class: X.Org Video Driver
[    51.866] 	ABI class: X.Org Video Driver, version 23.0
[    51.866] (II) LoadModule: "intel"
[    51.866] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    51.904] (II) Module intel: vendor="X.Org Foundation"
[    51.904] 	compiled for 1.19.5, module version = 2.99.917
[    51.904] 	Module class: X.Org Video Driver
[    51.904] 	ABI class: X.Org Video Driver, version 23.0
[    51.904] (II) LoadModule: "nouveau"
[    51.905] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    51.912] (II) Module nouveau: vendor="X.Org Foundation"
[    51.912] 	compiled for 1.19.3, module version = 1.0.15
[    51.912] 	Module class: X.Org Video Driver
[    51.912] 	ABI class: X.Org Video Driver, version 23.0
[    51.912] (II) LoadModule: "qxl"
[    51.912] (II) Loading /usr/lib/xorg/modules/drivers/qxl_drv.so
[    51.921] (II) Module qxl: vendor="X.Org Foundation"
[    51.921] 	compiled for 1.19.3, module version = 0.1.5
[    51.921] 	Module class: X.Org Video Driver
[    51.921] 	ABI class: X.Org Video Driver, version 23.0
[    51.921] (II) LoadModule: "radeon"
[    51.921] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    51.941] (II) Module radeon: vendor="X.Org Foundation"
[    51.941] 	compiled for 1.19.6, module version = 18.0.1
[    51.941] 	Module class: X.Org Video Driver
[    51.941] 	ABI class: X.Org Video Driver, version 23.0
[    51.941] (II) LoadModule: "vmware"
[    51.941] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[    52.831] (II) Module vmware: vendor="X.Org Foundation"
[    52.831] 	compiled for 1.19.3, module version = 13.2.1
[    52.831] 	Module class: X.Org Video Driver
[    52.831] 	ABI class: X.Org Video Driver, version 23.0
[    52.831] (II) LoadModule: "vesa"
[    52.831] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    52.833] (II) Module vesa: vendor="X.Org Foundation"
[    52.833] 	compiled for 1.19.3, module version = 2.3.4
[    52.833] 	Module class: X.Org Video Driver
[    52.833] 	ABI class: X.Org Video Driver, version 23.0
[    52.833] (II) LoadModule: "fbdev"
[    52.833] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    52.841] (II) Module fbdev: vendor="X.Org Foundation"
[    52.841] 	compiled for 1.19.3, module version = 0.4.4
[    52.841] 	Module class: X.Org Video Driver
[    52.841] 	ABI class: X.Org Video Driver, version 23.0
[    52.841] (II) LoadModule: "modesetting"
[    52.841] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    52.849] (II) Module modesetting: vendor="X.Org Foundation"
[    52.849] 	compiled for 1.19.6, module version = 1.19.6
[    52.849] 	Module class: X.Org Video Driver
[    52.849] 	ABI class: X.Org Video Driver, version 23.0
[    52.849] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    52.849] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    52.851] (II) VESA: driver for VESA chipsets: vesa
[    52.851] (II) FBDEV: driver for framebuffer: fbdev
[    52.851] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    53.011] (++) Using config file: "/root/xorg.conf.new"
[    53.011] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    53.021] (==) ServerLayout "X.org Configured"
[    53.021] (**) |-->Screen "Screen0" (0)
[    53.021] (**) |   |-->Monitor "Monitor0"
[    53.021] (**) |   |-->Device "Card0"
[    53.021] (**) |-->Screen "Screen1" (1)
[    53.021] (**) |   |-->Monitor "Monitor1"
[    53.022] (**) |   |-->Device "Card1"
[    53.022] (**) |-->Screen "Screen2" (2)
[    53.022] (**) |   |-->Monitor "Monitor2"
[    53.022] (**) |   |-->Device "Card2"
[    53.022] (**) |-->Screen "Screen3" (3)
[    53.022] (**) |   |-->Monitor "Monitor3"
[    53.022] (**) |   |-->Device "Card3"
[    53.022] (**) |-->Screen "Screen4" (4)
[    53.022] (**) |   |-->Monitor "Monitor4"
[    53.022] (**) |   |-->Device "Card4"
[    53.022] (**) |-->Screen "Screen5" (5)
[    53.022] (**) |   |-->Monitor "Monitor5"
[    53.023] (**) |   |-->Device "Card5"
[    53.023] (**) |-->Screen "Screen6" (6)
[    53.023] (**) |   |-->Monitor "Monitor6"
[    53.023] (**) |   |-->Device "Card6"
[    53.023] (**) |-->Screen "Screen7" (7)
[    53.023] (**) |   |-->Monitor "Monitor7"
[    53.023] (**) |   |-->Device "Card7"
[    53.023] (**) |-->Screen "Screen8" (8)
[    53.023] (**) |   |-->Monitor "Monitor8"
[    53.023] (**) |   |-->Device "Card8"
[    53.023] (**) |-->Screen "Screen9" (9)
[    53.023] (**) |   |-->Monitor "Monitor9"
[    53.024] (**) |   |-->Device "Card9"
[    53.024] (**) |-->Screen "Screen10" (10)
[    53.024] (**) |   |-->Monitor "Monitor10"
[    53.024] (**) |   |-->Device "Card10"
[    53.024] (**) |-->Screen "Screen11" (11)
[    53.024] (**) |   |-->Monitor "Monitor11"
[    53.024] (**) |   |-->Device "Card11"
[    53.024] (**) |-->Screen "Screen12" (12)
[    53.024] (**) |   |-->Monitor "Monitor12"
[    53.025] (**) |   |-->Device "Card12"
[    53.025] (**) |-->Screen "Screen13" (13)
[    53.025] (**) |   |-->Monitor "Monitor13"
[    53.025] (**) |   |-->Device "Card13"
[    53.025] (**) |-->Screen "Screen14" (14)
[    53.025] (**) |   |-->Monitor "Monitor14"
[    53.025] (**) |   |-->Device "Card14"
[    53.025] (**) |-->Screen "Screen15" (15)
[    53.025] (**) |   |-->Monitor "Monitor15"
[    53.025] (**) |   |-->Device "Card15"
[    53.025] (**) |-->Screen "Screen16" (16)
[    53.025] (**) |   |-->Monitor "Monitor16"
[    53.026] (**) |   |-->Device "Card16"
[    53.026] (**) |-->Screen "Screen17" (17)
[    53.026] (**) |   |-->Monitor "Monitor17"
[    53.026] (**) |   |-->Device "Card17"
[    53.026] (**) |-->Screen "Screen18" (18)
[    53.026] (**) |   |-->Monitor "Monitor18"
[    53.026] (**) |   |-->Device "Card18"
[    53.026] (**) |-->Screen "Screen19" (19)
[    53.026] (**) |   |-->Monitor "Monitor19"
[    53.026] (**) |   |-->Device "Card19"
[    53.026] (**) |-->Screen "Screen20" (20)
[    53.026] (**) |   |-->Monitor "Monitor20"
[    53.027] (**) |   |-->Device "Card20"
[    53.027] (**) |-->Screen "Screen21" (21)
[    53.027] (**) |   |-->Monitor "Monitor21"
[    53.027] (**) |   |-->Device "Card21"
[    53.027] (**) |-->Input Device "Mouse0"
[    53.027] (**) |-->Input Device "Keyboard0"
[    53.027] (==) Automatically adding devices
[    53.027] (==) Automatically enabling devices
[    53.027] (==) Automatically adding GPU devices
[    53.027] (==) Automatically binding GPU devices
[    53.036] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    53.068] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    53.068] 	Entry deleted from font path.
[    53.068] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    53.068] 	Entry deleted from font path.
[    53.068] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    53.068] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    53.069] 	Entry deleted from font path.
[    53.069] (**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    53.069] (**) ModulePath set to "/usr/lib/xorg/modules"
[    53.069] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    53.069] (WW) Disabling Mouse0
[    53.069] (WW) Disabling Keyboard0
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.069] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.070] (II) [KMS] drm report modesetting isn't supported.
[    53.071] (II) [KMS] drm report modesetting isn't supported.
[    53.071] (II) [KMS] drm report modesetting isn't supported.
[    53.071] (II) [KMS] drm report modesetting isn't supported.
[    53.071] (II) [KMS] drm report modesetting isn't supported.
[    53.071] (II) [KMS] drm report modesetting isn't supported.
[    53.071] (EE) 
[    53.071] (EE) Backtrace:
[    53.072] (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4d) [0x55bf9695b8cd]
[    53.072] (EE) 1: /usr/lib/xorg/Xorg (0x55bf967a3000+0x1bc669) [0x55bf9695f669]
[    53.072] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f9360cad000+0x12890) [0x7f9360cbf890]
[    53.072] (EE) 3: /lib/x86_64-linux-gnu/libc.so.6 (gsignal+0xc7) [0x7f93608fae97]
[    53.072] (EE) 4: /lib/x86_64-linux-gnu/libc.so.6 (abort+0x141) [0x7f93608fc801]
[    53.072] (EE) 5: /lib/x86_64-linux-gnu/libc.so.6 (0x7f93608bc000+0x89897) [0x7f9360945897]
[    53.073] (EE) 6: /lib/x86_64-linux-gnu/libc.so.6 (0x7f93608bc000+0x9090a) [0x7f936094c90a]
[    53.073] (EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (cfree+0x4dc) [0x7f9360953e2c]
[    53.073] (EE) 8: /usr/lib/xorg/Xorg (DoConfigure+0xbf9) [0x55bf9682cbc9]
[    53.073] (EE) 9: /usr/lib/xorg/Xorg (InitOutput+0x1255) [0x55bf9683c8d5]
[    53.073] (EE) 10: /usr/lib/xorg/Xorg (0x55bf967a3000+0x56cd3) [0x55bf967f9cd3]
[    53.074] (EE) 11: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xe7) [0x7f93608ddb97]
[    53.076] (EE) 12: /usr/lib/xorg/Xorg (_start+0x2a) [0x55bf967e3b8a]
[    53.076] (EE) 
[    53.076] (EE) 
Fatal server error:
[    53.077] (EE) Caught signal 6 (Aborted). Server aborting
[    53.077] (EE) 
[    53.077] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    53.077] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    53.078] (EE) 
[    53.078] (EE) Server terminated with error (1). Closing log file. 

Xorg.0_nomodeset.log

Code: Select all

[    32.896] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    32.896] X Protocol Version 11, Revision 0
[    32.896] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[    32.896] Current Operating System: Linux bg-workstation 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64
[    32.896] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=68cccde5-9739-4dc4-9cde-224b8b13a0ba ro nomodeset
[    32.896] Build Date: 25 October 2018  04:11:27PM
[    32.896] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[    32.896] Current version of pixman: 0.34.0
[    32.896] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    32.896] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    32.896] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 22 22:01:22 2018
[    32.920] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    32.920] (==) No Layout section.  Using the first Screen section.
[    32.920] (==) No screen section available. Using defaults.
[    32.920] (**) |-->Screen "Default Screen Section" (0)
[    32.920] (**) |   |-->Monitor "<default monitor>"
[    32.921] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    32.921] (==) Automatically adding devices
[    32.921] (==) Automatically enabling devices
[    32.921] (==) Automatically adding GPU devices
[    32.921] (==) Automatically binding GPU devices
[    32.921] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    32.921] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    32.921] 	Entry deleted from font path.
[    32.921] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    32.921] 	Entry deleted from font path.
[    32.921] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    32.921] 	Entry deleted from font path.
[    32.921] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    32.921] 	Entry deleted from font path.
[    32.921] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    32.921] 	Entry deleted from font path.
[    32.921] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    32.921] (==) ModulePath set to "/usr/lib/xorg/modules"
[    32.921] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    32.921] (II) Loader magic: 0x558ddda92020
[    32.921] (II) Module ABI versions:
[    32.921] 	X.Org ANSI C Emulation: 0.4
[    32.921] 	X.Org Video Driver: 23.0
[    32.921] 	X.Org XInput driver : 24.1
[    32.921] 	X.Org Server Extension : 10.0
[    32.921] (++) using VT number 7

[    32.921] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    32.924] (--) PCI:*(0:1:0:0) 1002:6739:1462:2441 rev 0, Mem @ 0xd0000000/268435456, 0xfd3c0000/131072, I/O @ 0x0000ae00/256, BIOS @ 0x????????/131072
[    32.924] (II) LoadModule: "glx"
[    32.924] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    33.292] (II) Module glx: vendor="X.Org Foundation"
[    33.292] 	compiled for 1.19.6, module version = 1.0.0
[    33.292] 	ABI class: X.Org Server Extension, version 10.0
[    33.292] (==) Matched ati as autoconfigured driver 0
[    33.292] (==) Matched modesetting as autoconfigured driver 1
[    33.292] (==) Matched fbdev as autoconfigured driver 2
[    33.292] (==) Matched vesa as autoconfigured driver 3
[    33.292] (==) Assigned the driver to the xf86ConfigLayout
[    33.292] (II) LoadModule: "ati"
[    33.292] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    33.292] (II) Module ati: vendor="X.Org Foundation"
[    33.292] 	compiled for 1.19.6, module version = 18.0.1
[    33.292] 	Module class: X.Org Video Driver
[    33.292] 	ABI class: X.Org Video Driver, version 23.0
[    33.356] (II) LoadModule: "radeon"
[    33.356] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    33.367] (II) Module radeon: vendor="X.Org Foundation"
[    33.367] 	compiled for 1.19.6, module version = 18.0.1
[    33.367] 	Module class: X.Org Video Driver
[    33.367] 	ABI class: X.Org Video Driver, version 23.0
[    33.367] (II) LoadModule: "modesetting"
[    33.367] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    33.367] (II) Module modesetting: vendor="X.Org Foundation"
[    33.367] 	compiled for 1.19.6, module version = 1.19.6
[    33.367] 	Module class: X.Org Video Driver
[    33.367] 	ABI class: X.Org Video Driver, version 23.0
[    33.367] (II) LoadModule: "fbdev"
[    33.367] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    33.367] (II) Module fbdev: vendor="X.Org Foundation"
[    33.367] 	compiled for 1.19.3, module version = 0.4.4
[    33.367] 	Module class: X.Org Video Driver
[    33.367] 	ABI class: X.Org Video Driver, version 23.0
[    33.367] (II) LoadModule: "vesa"
[    33.367] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    33.367] (II) Module vesa: vendor="X.Org Foundation"
[    33.367] 	compiled for 1.19.3, module version = 2.3.4
[    33.367] 	Module class: X.Org Video Driver
[    33.367] 	ABI class: X.Org Video Driver, version 23.0
[    33.367] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    33.369] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    33.369] (II) FBDEV: driver for framebuffer: fbdev
[    33.369] (II) VESA: driver for VESA chipsets: vesa
[    33.409] (II) [KMS] drm report modesetting isn't supported.
[    33.410] (EE) open /dev/dri/card0: No such file or directory
[    33.410] (WW) Falling back to old probe method for modesetting
[    33.410] (EE) open /dev/dri/card0: No such file or directory
[    33.410] (II) Loading sub module "fbdevhw"
[    33.410] (II) LoadModule: "fbdevhw"
[    33.410] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    33.410] (II) Module fbdevhw: vendor="X.Org Foundation"
[    33.410] 	compiled for 1.19.6, module version = 0.0.2
[    33.410] 	ABI class: X.Org Video Driver, version 23.0
[    33.410] (**) FBDEV(2): claimed PCI slot 1@0:0:0
[    33.410] (II) FBDEV(2): using default device
[    33.410] (WW) Falling back to old probe method for vesa
[    33.410] (EE) Screen 0 deleted because of no matching config section.
[    33.410] (II) UnloadModule: "radeon"
[    33.410] (EE) Screen 0 deleted because of no matching config section.
[    33.410] (II) UnloadModule: "modesetting"
[    33.410] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    33.410] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    33.410] (==) FBDEV(0): RGB weight 888
[    33.410] (==) FBDEV(0): Default visual is TrueColor
[    33.410] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    33.410] (II) FBDEV(0): hardware: VESA VGA (video memory: 7552kB)
[    33.410] (II) FBDEV(0): checking modes against framebuffer device...
[    33.410] (II) FBDEV(0): checking modes against monitor...
[    33.410] (--) FBDEV(0): Virtual size is 1600x1200 (pitch 1600)
[    33.410] (**) FBDEV(0):  Built-in mode "current": 192.0 MHz, 94.5 kHz, 77.2 Hz
[    33.410] (II) FBDEV(0): Modeline "current"x0.0  192.01  1600 1632 1832 2032  1200 1204 1208 1224 -hsync -vsync -csync (94.5 kHz b)
[    33.410] (==) FBDEV(0): DPI set to (96, 96)
[    33.410] (II) Loading sub module "fb"
[    33.410] (II) LoadModule: "fb"
[    33.410] (II) Loading /usr/lib/xorg/modules/libfb.so
[    33.410] (II) Module fb: vendor="X.Org Foundation"
[    33.410] 	compiled for 1.19.6, module version = 1.0.0
[    33.410] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    33.410] (**) FBDEV(0): using shadow framebuffer
[    33.410] (II) Loading sub module "shadow"
[    33.410] (II) LoadModule: "shadow"
[    33.410] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    33.410] (II) Module shadow: vendor="X.Org Foundation"
[    33.410] 	compiled for 1.19.6, module version = 1.1.0
[    33.410] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    33.410] (II) UnloadModule: "vesa"
[    33.410] (II) Unloading vesa
[    33.410] (==) Depth 24 pixmap format is 32 bpp
[    33.410] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    33.425] (==) FBDEV(0): Backing store enabled
[    33.425] (==) FBDEV(0): DPMS enabled
[    33.425] (==) RandR enabled
[    33.431] (II) SELinux: Disabled on system
[    33.431] (II) AIGLX: Screen 0 is not DRI2 capable
[    33.431] (EE) AIGLX: reverting to software rendering
[    33.761] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    33.761] (II) IGLX: Loaded and initialized swrast
[    33.761] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    33.834] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    33.834] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    33.834] (II) LoadModule: "libinput"
[    33.834] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    33.880] (II) Module libinput: vendor="X.Org Foundation"
[    33.880] 	compiled for 1.19.6, module version = 0.27.1
[    33.880] 	Module class: X.Org XInput Driver
[    33.880] 	ABI class: X.Org XInput driver, version 24.1
[    33.880] (II) Using input driver 'libinput' for 'Power Button'
[    33.880] (**) Power Button: always reports core events
[    33.880] (**) Option "Device" "/dev/input/event1"
[    33.880] (**) Option "_source" "server/udev"
[    33.881] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    33.881] (II) event1  - Power Button: device is a keyboard
[    33.881] (II) event1  - Power Button: device removed
[    33.896] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    33.896] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.896] (**) Option "xkb_model" "pc105"
[    33.896] (**) Option "xkb_layout" "us"
[    33.896] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    33.896] (II) event1  - Power Button: device is a keyboard
[    33.896] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    33.896] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    33.896] (II) Using input driver 'libinput' for 'Power Button'
[    33.896] (**) Power Button: always reports core events
[    33.896] (**) Option "Device" "/dev/input/event0"
[    33.896] (**) Option "_source" "server/udev"
[    33.897] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    33.897] (II) event0  - Power Button: device is a keyboard
[    33.897] (II) event0  - Power Button: device removed
[    33.912] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    33.912] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    33.912] (**) Option "xkb_model" "pc105"
[    33.912] (**) Option "xkb_layout" "us"
[    33.912] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    33.912] (II) event0  - Power Button: device is a keyboard
[    33.912] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[    33.912] (II) No input driver specified, ignoring this device.
[    33.912] (II) This device may have been added with another device file.
[    33.913] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    33.913] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[    33.913] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    33.913] (**) Logitech USB Receiver: always reports core events
[    33.913] (**) Option "Device" "/dev/input/event3"
[    33.913] (**) Option "_source" "server/udev"
[    33.972] (II) event3  - Logitech USB Receiver: is tagged by udev as: Mouse
[    33.972] (II) event3  - Logitech USB Receiver: device is a pointer
[    33.972] (II) event3  - Logitech USB Receiver: device removed
[    34.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C52F.0001/input/input3/event3"
[    34.004] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[    34.004] (**) Option "AccelerationScheme" "none"
[    34.004] (**) Logitech USB Receiver: (accel) selected scheme none/0
[    34.004] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    34.004] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    34.064] (II) event3  - Logitech USB Receiver: is tagged by udev as: Mouse
[    34.064] (II) event3  - Logitech USB Receiver: device is a pointer
[    34.064] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    34.064] (II) No input driver specified, ignoring this device.
[    34.064] (II) This device may have been added with another device file.
[    34.064] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[    34.065] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    34.065] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    34.065] (**) Logitech USB Receiver: always reports core events
[    34.065] (**) Option "Device" "/dev/input/event4"
[    34.065] (**) Option "_source" "server/udev"
[    34.065] (II) event4  - Logitech USB Receiver: is tagged by udev as: Keyboard
[    34.065] (II) event4  - Logitech USB Receiver: device is a keyboard
[    34.065] (II) event4  - Logitech USB Receiver: device removed
[    34.080] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[    34.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C52F.0002/input/input4/event4"
[    34.080] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    34.080] (**) Option "AccelerationScheme" "none"
[    34.080] (**) Logitech USB Receiver: (accel) selected scheme none/0
[    34.080] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    34.080] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    34.080] (II) event4  - Logitech USB Receiver: is tagged by udev as: Keyboard
[    34.080] (II) event4  - Logitech USB Receiver: device is a keyboard
[    34.080] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[    34.080] (II) No input driver specified, ignoring this device.
[    34.080] (II) This device may have been added with another device file.
[    34.080] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[    34.080] (II) No input driver specified, ignoring this device.
[    34.080] (II) This device may have been added with another device file.
[    34.081] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[    34.081] (II) No input driver specified, ignoring this device.
[    34.081] (II) This device may have been added with another device file.
[    34.081] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[    34.081] (II) No input driver specified, ignoring this device.
[    34.081] (II) This device may have been added with another device file.
[    34.081] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[    34.081] (II) No input driver specified, ignoring this device.
[    34.081] (II) This device may have been added with another device file.
[    34.081] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[    34.081] (II) No input driver specified, ignoring this device.
[    34.081] (II) This device may have been added with another device file.
[    34.081] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[    34.081] (II) No input driver specified, ignoring this device.
[    34.081] (II) This device may have been added with another device file.
[    34.082] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event13)
[    34.082] (**) HD Webcam C525: Applying InputClass "libinput keyboard catchall"
[    34.082] (II) Using input driver 'libinput' for 'HD Webcam C525'
[    34.082] (**) HD Webcam C525: always reports core events
[    34.082] (**) Option "Device" "/dev/input/event13"
[    34.082] (**) Option "_source" "server/udev"
[    34.082] (II) event13 - HD Webcam C525: is tagged by udev as: Keyboard
[    34.082] (II) event13 - HD Webcam C525: device is a keyboard
[    34.082] (II) event13 - HD Webcam C525: device removed
[    34.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.2/input/input13/event13"
[    34.112] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 10)
[    34.112] (**) Option "xkb_model" "pc105"
[    34.112] (**) Option "xkb_layout" "us"
[    34.112] (II) event13 - HD Webcam C525: is tagged by udev as: Keyboard
[    34.112] (II) event13 - HD Webcam C525: device is a keyboard
[    34.112] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    34.112] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    34.112] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    34.112] (**) AT Translated Set 2 keyboard: always reports core events
[    34.112] (**) Option "Device" "/dev/input/event2"
[    34.112] (**) Option "_source" "server/udev"
[    34.113] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    34.113] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    34.113] (II) event2  - AT Translated Set 2 keyboard: device removed
[    34.128] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    34.128] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    34.128] (**) Option "xkb_model" "pc105"
[    34.128] (**) Option "xkb_layout" "us"
[    34.128] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    34.128] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    34.131] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    34.131] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    34.132] (**) Logitech USB Receiver: always reports core events
[    34.132] (**) Option "Device" "/dev/input/event4"
[    34.132] (**) Option "_source" "_driver/libinput"
[    34.132] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[    34.132] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C52F.0002/input/input4/event4"
[    34.132] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[    34.132] (**) Option "xkb_model" "pc105"
[    34.132] (**) Option "xkb_layout" "us"

SIM_142
Level 1
Level 1
Posts: 13
Joined: Mon Dec 31, 2018 9:02 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by SIM_142 » Fri Jan 04, 2019 7:54 am

I just offered an evga GeForce gtx 1060 SSC card. Upgrading from my Radeon 4850 (oldie). When I positioned the new card in my PC won't boot. I can get to the bios but it truly is it. It may not make it to the Windows splash and the display simply stays black. If I placed the antique card in my computer boots up simply fine. A friend of mine brought his PC over and we positioned the card in it, his booted simply pleasant, so the cardboard works and his strength deliver became 400W, mine is 600W. I've tried pretty much everything indexed in boards...Walking DDU, seeking to manually delete drivers, walking with both playing cards on the same time, swapping PIC slots, I even upgraded to Windows 10 from 7 last. I also can not boot into secure mode with the new gpu, and my mobo would not have on board pics. Set up is thermaltake TR-600 600W electricity deliver, gigabyte ga-p55-ud3r mobo, i5 650 processor, 8gb DDR3 RAM. I spent actually 15 hours in this the previous day and I'm about to surrender. When I first turn the pc at the fanatics will start up and after a couple of seconds (likely 30ish) they prevent. Don't consider if it did that on my friend's computer or no longer or if it's just an vehicle characteristic of the card to lessen energy intake.
You ran DDU in Safe Mode, with all of the additional alternatives decided on (like put off C:/AMD folder)? You should pick out Clean and Shutdown then after energy down I might pull the CMOS battery, 24-pin, and CPU strength connectors.

Let it sit for 10 mins and then reassemble. If that doesn't paintings (or if you attempted exactly that) we may should do a little extra thinking.

EDIT: You simply can also want to run DDU twice for both AMD and NVIDIA drivers and handiest Shut-down on the second clean

mihalan
Level 1
Level 1
Posts: 5
Joined: Tue Dec 25, 2018 10:13 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by mihalan » Fri Jan 04, 2019 6:09 pm

SIM_142 wrote:
Fri Jan 04, 2019 7:54 am
You should pick out Clean and Shutdown then after energy down I might pull the CMOS battery, 24-pin, and CPU strength connectors.

Let it sit for 10 mins and then reassemble. If that doesn't paintings (or if you attempted exactly that) we may should do a little extra thinking.

EDIT: You simply can also want to run DDU twice for both AMD and NVIDIA drivers and handiest Shut-down on the second clean
I tried, the situation did not change, but the following errors appeared when loading system:
ACPI Exception: Could not find / resolve named package element: LNKC (20170831 / dspkginit-381)
ACPI Exception: Could not find / resolve named package element: LNKD (20170831 / dspkginit-381)
ACPI Exception: Could not find / resolve named package element: LNKA (20170831 / dspkginit-381)


As understood in Google, they are apeared in kernel version 4.15, but not sure that they affect on system load.

p.s.
I do not have nvidia drivers in any system (win, mint), because there was no their gpu.
In "Win 10" everything works fine, I can even run some 3D games.

dmesg in recovery mode

Code: Select all

[    0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=68cccde5-9739-4dc4-9cde-224b8b13a0ba ro recovery nomodeset
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfda0000-0x00000000cfdd0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfdd1000-0x00000000cfdfffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-UD3/GA-970A-UD3, BIOS F7 10/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000330000000 aka 13056M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3326M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4c60-0x000f4c6f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 92000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x12af3e000, 0x12af3efff] PGTABLE
[    0.000000] BRK [0x12af3f000, 0x12af3ffff] PGTABLE
[    0.000000] BRK [0x12af40000, 0x12af40fff] PGTABLE
[    0.000000] BRK [0x12af41000, 0x12af41fff] PGTABLE
[    0.000000] BRK [0x12af42000, 0x12af42fff] PGTABLE
[    0.000000] BRK [0x12af43000, 0x12af43fff] PGTABLE
[    0.000000] BRK [0x12af44000, 0x12af44fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x311cb000-0x348dcfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6B80 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000CFDD1000 000048 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000CFDD1080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000CFDD1100 00792A (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000CFDA0000 000040
[    0.000000] ACPI: SSDT 0x00000000CFDD8B00 000544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: MSDM 0x00000000CFDD9080 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 0x00000000CFDD9100 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000CFDD9140 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 0x00000000CFDD91C0 000034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 0x00000000CFDD9230 000202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000CFDD8A40 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 0x00000000CFDD9440 0061FD (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x32ffd5000-0x32fffffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000032fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cfd9ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000032fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000032fffffff]
[    0.000000] On node 0 totalpages: 3145015
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3991 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13239 pages used for memmap
[    0.000000]   DMA32 zone: 847264 pages, LIFO batch:31
[    0.000000]   Normal zone: 35840 pages used for memmap
[    0.000000]   Normal zone: 2293760 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 105 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfda0000-0xcfdd0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfdd1000-0xcfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3095851
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=68cccde5-9739-4dc4-9cde-224b8b13a0ba ro recovery nomodeset
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 12165840K/12580060K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 414220K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 39065 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3825.494 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7650.98 BogoMIPS (lpj=15301976)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028359] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.030409] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030537] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.030641] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.030882] CPU: Physical Processor ID: 0
[    0.030922] CPU: Processor Core ID: 0
[    0.030961] mce: CPU supports 6 MCE banks
[    0.031005] LVT offset 0 assigned for vector 0xf9
[    0.031046] process: using AMD E400 aware idle routine
[    0.031087] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.031127] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.031168] Spectre V2 : Mitigation: Full AMD retpoline
[    0.031208] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.031986] Freeing SMP alternatives memory: 36K
[    0.036010] process: System has AMD C1E enabled
[    0.040000] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
[    0.040000] APIC delta adjusted to PM-Timer: 1258417 (1222263)
[    0.040000] process: Switch to broadcast mode on CPU0
[    0.040000] smpboot: CPU0: AMD Phenom(tm) II X2 555 Processor (family: 0x10, model: 0x4, stepping: 0x3)
[    0.040000] Performance Events: AMD PMU driver.
[    0.040000] ... version:                0
[    0.040000] ... bit width:              48
[    0.040000] ... generic registers:      4
[    0.040000] ... value mask:             0000ffffffffffff
[    0.040000] ... max period:             00007fffffffffff
[    0.040000] ... fixed-purpose events:   0
[    0.040000] ... event mask:             000000000000000f
[    0.040000] Hierarchical SRCU implementation.
[    0.040000] smp: Bringing up secondary CPUs ...
[    0.040000] x86: Booting SMP configuration:
[    0.040000] .... node  #0, CPUs:      #1
[    0.004000] do_IRQ: 1.55 No irq handler for vector
[    0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.004000] process: Switch to broadcast mode on CPU1
[    0.040000] smp: Brought up 1 node, 2 CPUs
[    0.040007] smpboot: Max logical packages: 4
[    0.040047] smpboot: Total of 2 processors activated (15301.97 BogoMIPS)
[    0.042679] devtmpfs: initialized
[    0.042679] x86/mm: Memory block size: 128MB
[    0.042679] evm: security.selinux
[    0.042679] evm: security.SMACK64
[    0.042679] evm: security.SMACK64EXEC
[    0.042679] evm: security.SMACK64TRANSMUTE
[    0.042679] evm: security.SMACK64MMAP
[    0.042679] evm: security.apparmor
[    0.042679] evm: security.ima
[    0.044005] evm: security.capability
[    0.044084] PM: Registering ACPI NVS region [mem 0xcfda0000-0xcfdd0fff] (200704 bytes)
[    0.044116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044116] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.044186] pinctrl core: initialized pinctrl subsystem
[    0.044313] RTC time: 22:21:55, date: 01/04/19
[    0.044437] NET: Registered protocol family 16
[    0.044550] audit: initializing netlink subsys (disabled)
[    0.044595] audit: type=2000 audit(1546640514.044:1): state=initialized audit_enabled=0 res=1
[    0.044595] cpuidle: using governor ladder
[    0.044595] cpuidle: using governor menu
[    0.044595] node 0 link 0: io port [8000, ffff]
[    0.044595] TOM: 00000000d0000000 aka 3328M
[    0.044595] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.044595] node 0 link 0: mmio [a0000, bffff]
[    0.044595] node 0 link 0: mmio [d0000000, dfffffff]
[    0.044595] node 0 link 0: mmio [f0000000, ffffffff]
[    0.044595] node 0 link 0: mmio [e0000000, e07fffff] ==> [e0100000, e07fffff]
[    0.044595] TOM2: 0000000330000000 aka 13056M
[    0.044595] bus: [bus 00-07] on node 0 link 0
[    0.044595] bus: 00 [io  0x0000-0xffff]
[    0.044595] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.044595] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.044595] bus: 00 [mem 0xe0800000-0xffffffff]
[    0.044595] bus: 00 [mem 0xe0100000-0xe07fffff]
[    0.044595] bus: 00 [mem 0x330000000-0xfcffffffff]
[    0.044595] ACPI: bus type PCI registered
[    0.044595] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044595] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.044595] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.044595] PCI: Using configuration type 1 for base access
[    0.048929] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.048929] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.048929] ACPI: Added _OSI(Module Device)
[    0.048929] ACPI: Added _OSI(Processor Device)
[    0.048929] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.048929] ACPI: Added _OSI(Processor Aggregator Device)
[    0.048929] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[    0.048929] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[    0.048929] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[    0.048929] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[    0.050309] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.050362] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.050414] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.050465] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.050558] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.050609] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.050662] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.052013] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.052107] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.052160] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.052211] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.052263] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.052359] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.052411] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.052463] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.052515] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.052610] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.052664] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.052717] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.052768] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.052863] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.052915] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.052966] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.053018] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.053113] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.053166] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.053218] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.053271] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.053367] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.053418] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.053471] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.053522] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.053617] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.053668] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.053721] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.053775] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.053870] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.053921] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.053974] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.054025] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.054121] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381)
[    0.054175] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381)
[    0.054227] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381)
[    0.054279] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381)
[    0.056378] ACPI: Interpreter enabled
[    0.056441] ACPI: (supports S0 S3 S4 S5)
[    0.056482] ACPI: Using IOAPIC for interrupt routing
[    0.056551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.056749] ACPI: Enabled 9 GPEs in block 00 to 1F
[    0.062528] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.062574] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.062624] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.062929] PCI host bridge to bus 0000:00
[    0.062970] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.063011] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.063052] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.063099] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.063146] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.063193] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[    0.063240] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.063287] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.063297] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    0.063437] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.063451] pci 0000:00:02.0: enabling Extended Tags
[    0.063508] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.063583] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.063596] pci 0000:00:04.0: enabling Extended Tags
[    0.063651] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.063722] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.063735] pci 0000:00:05.0: enabling Extended Tags
[    0.063790] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.063863] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.063876] pci 0000:00:09.0: enabling Extended Tags
[    0.063931] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.064013] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.064026] pci 0000:00:0a.0: enabling Extended Tags
[    0.064082] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.064160] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.064174] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    0.064180] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.064186] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.064192] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.064198] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.064205] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
[    0.064297] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.064309] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
[    0.064418] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.064432] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
[    0.064486] pci 0000:00:12.2: supports D1 D2
[    0.064487] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.064559] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.064571] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
[    0.064680] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.064694] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
[    0.064748] pci 0000:00:13.2: supports D1 D2
[    0.064749] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.064821] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.064934] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.064945] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.064952] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.064958] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.064964] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.064970] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.064983] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.065024] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.065064] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.065105] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.065216] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.065232] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.065277] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.065351] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.065465] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.065557] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.065569] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
[    0.065679] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.065705] pci 0000:00:15.0: enabling Extended Tags
[    0.065773] pci 0000:00:15.0: supports D1 D2
[    0.065845] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.065857] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
[    0.065966] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.065980] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
[    0.066034] pci 0000:00:16.2: supports D1 D2
[    0.066035] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.066108] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.066174] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.066239] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.066303] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.066369] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.066468] pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
[    0.066487] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.066496] pci 0000:01:00.0: reg 0x18: [mem 0xfd3c0000-0xfd3dffff 64bit]
[    0.066502] pci 0000:01:00.0: reg 0x20: [io  0xae00-0xaeff]
[    0.066514] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.066519] pci 0000:01:00.0: enabling Extended Tags
[    0.066594] pci 0000:01:00.0: supports D1 D2
[    0.066634] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[    0.066653] pci 0000:01:00.1: reg 0x10: [mem 0xfd3fc000-0xfd3fffff 64bit]
[    0.066684] pci 0000:01:00.1: enabling Extended Tags
[    0.066758] pci 0000:01:00.1: supports D1 D2
[    0.076024] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.076068] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.076070] pci 0000:00:02.0:   bridge window [mem 0xfd300000-0xfd3fffff]
[    0.076072] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.076116] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.076135] pci 0000:02:00.0: reg 0x10: [mem 0xfdef8000-0xfdefffff 64bit]
[    0.076169] pci 0000:02:00.0: enabling Extended Tags
[    0.076249] pci 0000:02:00.0: supports D1 D2
[    0.076250] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088021] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.088065] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.088066] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.088068] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.088117] pci 0000:03:00.0: [1102:000b] type 00 class 0x040300
[    0.088142] pci 0000:03:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
[    0.088155] pci 0000:03:00.0: reg 0x18: [mem 0xfbc00000-0xfbdfffff 64bit]
[    0.088168] pci 0000:03:00.0: reg 0x20: [mem 0xf4000000-0xf7ffffff 64bit]
[    0.100022] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.100064] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.100066] pci 0000:00:05.0:   bridge window [mem 0xf4000000-0xfbffffff]
[    0.100068] pci 0000:00:05.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.100114] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.100133] pci 0000:04:00.0: reg 0x10: [io  0xce00-0xceff]
[    0.100150] pci 0000:04:00.0: reg 0x18: [mem 0xfdaff000-0xfdafffff 64bit pref]
[    0.100161] pci 0000:04:00.0: reg 0x20: [mem 0xfdaf8000-0xfdafbfff 64bit pref]
[    0.100226] pci 0000:04:00.0: supports D1 D2
[    0.100226] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112022] pci 0000:00:09.0: PCI bridge to [bus 04]
[    0.112066] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    0.112067] pci 0000:00:09.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.112069] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.112117] pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.112136] pci 0000:05:00.0: reg 0x10: [mem 0xfd7f8000-0xfd7fffff 64bit]
[    0.112170] pci 0000:05:00.0: enabling Extended Tags
[    0.112249] pci 0000:05:00.0: supports D1 D2
[    0.112250] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.124021] pci 0000:00:0a.0: PCI bridge to [bus 05]
[    0.124064] pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]
[    0.124066] pci 0000:00:0a.0:   bridge window [mem 0xfd700000-0xfd7fffff]
[    0.124068] pci 0000:00:0a.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[    0.124124] pci 0000:06:0e.0: [1106:3044] type 00 class 0x0c0010
[    0.124145] pci 0000:06:0e.0: reg 0x10: [mem 0xfd9ff000-0xfd9ff7ff]
[    0.124154] pci 0000:06:0e.0: reg 0x14: [io  0x9f00-0x9f7f]
[    0.124230] pci 0000:06:0e.0: supports D2
[    0.124231] pci 0000:06:0e.0: PME# supported from D2 D3hot D3cold
[    0.124276] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[    0.124318] pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
[    0.124321] pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.124323] pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff pref]
[    0.124324] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.124325] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.124326] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.124327] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.124328] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.124329] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[    0.124360] pci 0000:00:15.0: PCI bridge to [bus 07]
[    0.124403] pci 0000:00:15.0:   bridge window [io  0x8000-0x8fff]
[    0.124405] pci 0000:00:15.0:   bridge window [mem 0xfd600000-0xfd6fffff]
[    0.124408] pci 0000:00:15.0:   bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[    0.124671] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    0.124762] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    0.124850] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    0.124939] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    0.125026] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    0.125114] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    0.125202] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    0.125290] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    0.125901] SCSI subsystem initialized
[    0.125976] libata version 3.00 loaded.
[    0.125976] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.125976] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.128003] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.128044] vgaarb: loaded
[    0.128095] ACPI: bus type USB registered
[    0.128146] usbcore: registered new interface driver usbfs
[    0.128191] usbcore: registered new interface driver hub
[    0.128240] usbcore: registered new device driver usb
[    0.128315] EDAC MC: Ver: 3.0.0
[    0.128315] PCI: Using ACPI for IRQ routing
[    0.134932] PCI: pci_cache_line_size set to 64 bytes
[    0.134983] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
[    0.134984] e820: reserve RAM buffer [mem 0xcfda0000-0xcfffffff]
[    0.135062] NetLabel: Initializing
[    0.135101] NetLabel:  domain hash size = 128
[    0.135140] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.135190] NetLabel:  unlabeled traffic allowed by default
[    0.135241] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.135241] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.137038] clocksource: Switched to clocksource hpet
[    0.146431] VFS: Disk quotas dquot_6.6.0
[    0.146487] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.146621] AppArmor: AppArmor Filesystem Enabled
[    0.146686] pnp: PnP ACPI init
[    0.146846] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.146888] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.146929] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.146972] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147251] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.147317] system 00:01: [io  0x0900-0x091f] has been reserved
[    0.147358] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.147398] system 00:01: [io  0x040b] has been reserved
[    0.147439] system 00:01: [io  0x04d6] has been reserved
[    0.147480] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.147520] system 00:01: [io  0x0c14] has been reserved
[    0.147560] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.147601] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.147641] system 00:01: [io  0x0c6f] has been reserved
[    0.147682] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.147723] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.147763] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.147803] system 00:01: [io  0x0800-0x08fe] has been reserved
[    0.147844] system 00:01: [io  0x0a10-0x0a17] has been reserved
[    0.147884] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.147925] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.147965] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.148016] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.148063] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148221] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.148523] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.148570] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.148620] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.148663] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148849] system 00:06: [mem 0x000d4200-0x000d7fff] has been reserved
[    0.148891] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.148931] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.148973] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.149013] system 00:06: [mem 0xcfda0000-0xcfdfffff] could not be reserved
[    0.149054] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.149095] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.149136] system 00:06: [mem 0x00100000-0xcfd9ffff] could not be reserved
[    0.149177] system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved
[    0.149218] system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved
[    0.149258] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.149299] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.149340] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.149383] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.149402] pnp: PnP ACPI: found 7 devices
[    0.155769] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.155847] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd300000-0xfd31ffff pref]
[    0.155895] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.155936] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.155977] pci 0000:00:02.0:   bridge window [mem 0xfd300000-0xfd3fffff]
[    0.156024] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.156072] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.156113] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.156154] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.156196] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.156244] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.156285] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.156326] pci 0000:00:05.0:   bridge window [mem 0xf4000000-0xfbffffff]
[    0.156368] pci 0000:00:05.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.156416] pci 0000:00:09.0: PCI bridge to [bus 04]
[    0.156456] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    0.156497] pci 0000:00:09.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.156539] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.156587] pci 0000:00:0a.0: PCI bridge to [bus 05]
[    0.156627] pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]
[    0.156669] pci 0000:00:0a.0:   bridge window [mem 0xfd700000-0xfd7fffff]
[    0.156710] pci 0000:00:0a.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[    0.156758] pci 0000:00:14.4: PCI bridge to [bus 06]
[    0.156798] pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
[    0.156841] pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.156883] pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff pref]
[    0.156932] pci 0000:00:15.0: PCI bridge to [bus 07]
[    0.156972] pci 0000:00:15.0:   bridge window [io  0x8000-0x8fff]
[    0.157015] pci 0000:00:15.0:   bridge window [mem 0xfd600000-0xfd6fffff]
[    0.157057] pci 0000:00:15.0:   bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[    0.157106] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.157107] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.157108] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.157109] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.157110] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.157111] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff window]
[    0.157112] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.157113] pci_bus 0000:01: resource 1 [mem 0xfd300000-0xfd3fffff]
[    0.157113] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.157115] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.157115] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.157116] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.157117] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.157118] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xfbffffff]
[    0.157119] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.157120] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.157121] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.157122] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.157123] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.157124] pci_bus 0000:05: resource 1 [mem 0xfd700000-0xfd7fffff]
[    0.157125] pci_bus 0000:05: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
[    0.157126] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
[    0.157127] pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.157128] pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[    0.157129] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.157130] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.157131] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.157132] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.157133] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.157133] pci_bus 0000:06: resource 9 [mem 0xd0000000-0xfebfffff window]
[    0.157134] pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
[    0.157135] pci_bus 0000:07: resource 1 [mem 0xfd600000-0xfd6fffff]
[    0.157136] pci_bus 0000:07: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[    0.157201] NET: Registered protocol family 2
[    0.157443] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.157775] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.158065] TCP: Hash tables configured (established 131072 bind 65536)
[    0.158160] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.158280] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.158433] NET: Registered protocol family 1
[    0.480412] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.480730] PCI: CLS 64 bytes, default 64
[    0.480775] Unpacking initramfs...
[    1.103978] Freeing initrd memory: 56392K
[    1.104767] PCI-DMA: Disabling AGP.
[    1.104867] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.104908] PCI-DMA: using GART IOMMU.
[    1.104948] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.107528] LVT offset 1 assigned for vector 0x400
[    1.107578] IBS: LVT offset 1 assigned
[    1.107674] perf: AMD IBS detected (0x0000001f)
[    1.107765] Scanning for low memory corruption every 60 seconds
[    1.108308] Initialise system trusted keyrings
[    1.108355] Key type blacklist registered
[    1.108454] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.109369] zbud: loaded
[    1.109717] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.109890] fuse init (API version 7.26)
[    1.111636] Key type asymmetric registered
[    1.111678] Asymmetric key parser 'x509' registered
[    1.111758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.111835] io scheduler noop registered
[    1.111875] io scheduler deadline registered
[    1.111948] io scheduler cfq registered (default)
[    1.112671] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.112724] ACPI: Power Button [PWRB]
[    1.112791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.112873] ACPI: Power Button [PWRF]
[    1.112935] ACPI: ACPI: processor limited to max C-state 1
[    1.113193] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.133651] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.135308] Linux agpgart interface v0.103
[    1.136460] loop: module loaded
[    1.136643] libphy: Fixed MDIO Bus: probed
[    1.136683] tun: Universal TUN/TAP device driver, 1.6
[    1.136749] PPP generic driver version 2.4.2
[    1.136820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.136862] ehci-pci: EHCI PCI platform driver
[    1.137014] QUIRK: Enable AMD PLL fix
[    1.137030] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.137077] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.137126] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.137179] ehci-pci 0000:00:12.2: debug port 1
[    1.137250] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
[    1.156052] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.156136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.156177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.156224] usb usb1: Product: EHCI Host Controller
[    1.156264] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    1.156305] usb usb1: SerialNumber: 0000:00:12.2
[    1.156435] hub 1-0:1.0: USB hub found
[    1.156479] hub 1-0:1.0: 5 ports detected
[    1.156741] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.156784] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.156833] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.156886] ehci-pci 0000:00:13.2: debug port 1
[    1.156946] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
[    1.172048] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.172128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.172169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172216] usb usb2: Product: EHCI Host Controller
[    1.172256] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    1.172297] usb usb2: SerialNumber: 0000:00:13.2
[    1.172416] hub 2-0:1.0: USB hub found
[    1.172459] hub 2-0:1.0: 5 ports detected
[    1.175279] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.175323] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.175371] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.175424] ehci-pci 0000:00:16.2: debug port 1
[    1.175485] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
[    1.188047] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.188125] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.188167] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188213] usb usb3: Product: EHCI Host Controller
[    1.188253] usb usb3: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    1.188294] usb usb3: SerialNumber: 0000:00:16.2
[    1.188411] hub 3-0:1.0: USB hub found
[    1.188453] hub 3-0:1.0: 4 ports detected
[    1.188579] ehci-platform: EHCI generic platform driver
[    1.188628] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.188669] ohci-pci: OHCI PCI platform driver
[    1.188828] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.188873] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.188944] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
[    1.252063] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.252105] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.252151] usb usb4: Product: OHCI PCI host controller
[    1.252191] usb usb4: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[    1.252232] usb usb4: SerialNumber: 0000:00:12.0
[    1.252361] hub 4-0:1.0: USB hub found
[    1.252405] hub 4-0:1.0: 5 ports detected
[    1.252645] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.252688] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.252746] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
[    1.316063] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.316105] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.316152] usb usb5: Product: OHCI PCI host controller
[    1.316192] usb usb5: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[    1.316233] usb usb5: SerialNumber: 0000:00:13.0
[    1.316362] hub 5-0:1.0: USB hub found
[    1.316407] hub 5-0:1.0: 5 ports detected
[    1.316651] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.316695] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.316754] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
[    1.380061] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.380104] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.380150] usb usb6: Product: OHCI PCI host controller
[    1.380191] usb usb6: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[    1.380231] usb usb6: SerialNumber: 0000:00:14.5
[    1.380352] hub 6-0:1.0: USB hub found
[    1.380397] hub 6-0:1.0: 2 ports detected
[    1.380618] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.380663] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.380724] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
[    1.444061] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.444104] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.444150] usb usb7: Product: OHCI PCI host controller
[    1.444191] usb usb7: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[    1.444231] usb usb7: SerialNumber: 0000:00:16.0
[    1.444359] hub 7-0:1.0: USB hub found
[    1.444403] hub 7-0:1.0: 4 ports detected
[    1.444536] ohci-platform: OHCI generic platform driver
[    1.444584] uhci_hcd: USB Universal Host Controller Interface driver
[    1.444702] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.444746] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    1.444858] xhci_hcd 0000:02:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00080490
[    1.445013] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.445054] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.445101] usb usb8: Product: xHCI Host Controller
[    1.445141] usb usb8: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    1.445182] usb usb8: SerialNumber: 0000:02:00.0
[    1.445301] hub 8-0:1.0: USB hub found
[    1.445345] hub 8-0:1.0: 2 ports detected
[    1.445441] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.445483] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    1.445539] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.445596] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    1.445637] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.445684] usb usb9: Product: xHCI Host Controller
[    1.445724] usb usb9: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    1.445764] usb usb9: SerialNumber: 0000:02:00.0
[    1.445881] hub 9-0:1.0: USB hub found
[    1.445925] hub 9-0:1.0: 2 ports detected
[    1.446082] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.446126] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[    1.446235] xhci_hcd 0000:05:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00080490
[    1.446377] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.446419] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.446465] usb usb10: Product: xHCI Host Controller
[    1.446506] usb usb10: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    1.446546] usb usb10: SerialNumber: 0000:05:00.0
[    1.446663] hub 10-0:1.0: USB hub found
[    1.446707] hub 10-0:1.0: 2 ports detected
[    1.446803] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.446845] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
[    1.446900] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.446957] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.446998] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.447045] usb usb11: Product: xHCI Host Controller
[    1.447085] usb usb11: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    1.447125] usb usb11: SerialNumber: 0000:05:00.0
[    1.447239] hub 11-0:1.0: USB hub found
[    1.447283] hub 11-0:1.0: 2 ports detected
[    1.447411] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.447453] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.447629] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.447725] mousedev: PS/2 mouse device common for all mice
[    1.447872] rtc_cmos 00:02: RTC can wake from S4
[    1.447998] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.448076] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.448125] i2c /dev entries driver
[    1.448197] device-mapper: uevent: version 1.0.3
[    1.448314] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.448388] ledtrig-cpu: registered to indicate activity on CPUs
[    1.448700] NET: Registered protocol family 10
[    1.451571] Segment Routing with IPv6
[    1.451628] NET: Registered protocol family 17
[    1.451699] Key type dns_resolver registered
[    1.451881] RAS: Correctable Errors collector initialized.
[    1.451952] microcode: CPU0: patch_level=0x010000c8
[    1.451998] microcode: CPU1: patch_level=0x010000c8
[    1.452071] microcode: Microcode Update Driver: v2.2.
[    1.452078] sched_clock: Marking stable (1452068033, 0)->(2177527759, -725459726)
[    1.452311] registered taskstats version 1
[    1.452362] Loading compiled-in X.509 certificates
[    1.454389] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[    1.454451] zswap: loaded using pool lzo/zbud
[    1.456919] Key type big_key registered
[    1.456961] Key type trusted registered
[    1.458177] Key type encrypted registered
[    1.458220] AppArmor: AppArmor sha1 policy hashing enabled
[    1.458262] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.458318] evm: HMAC attrs: 0x1
[    1.458563]   Magic number: 3:426:400
[    1.458698] rtc_cmos 00:02: setting system clock to 2019-01-04 22:21:56 UTC (1546640516)
[    1.458824] acpi_cpufreq: overriding BIOS provided _PSD data
[    1.458906] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.458946] EDD information not available.
[    1.461760] Freeing unused kernel memory: 2404K
[    1.461801] Write protecting the kernel read-only data: 20480k
[    1.462472] Freeing unused kernel memory: 2008K
[    1.466415] Freeing unused kernel memory: 1904K
[    1.472611] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.475742] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.524025] usb 3-3: new high-speed USB device number 2 using ehci-pci
[    1.539266] ahci 0000:00:11.0: version 3.0
[    1.539481] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.539531] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.558414] scsi host0: ahci
[    1.558531] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.558580] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.561640] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0x0000000041d1f374, 50:e5:49:53:51:18, XID 0c900800 IRQ 26
[    1.561689] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.561777] scsi host1: ahci
[    1.568116] scsi host2: ahci
[    1.574509] [drm] VGACON disable radeon kernel modesetting.
[    1.574582] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[    1.576029] scsi host3: ahci
[    1.576108] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[    1.576156] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[    1.576202] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[    1.576250] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[    1.576491] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247)
[    1.576551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.580542] scsi host4: pata_atiixp
[    1.580755] scsi host5: pata_atiixp
[    1.580821] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    1.580866] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    1.588409] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    1.656073] firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.680854] usb 3-3: New USB device found, idVendor=0451, idProduct=8142
[    1.680897] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.680938] usb 3-3: SerialNumber: AC0A10799C0C
[    1.681123] hub 3-3:1.0: USB hub found
[    1.681227] hub 3-3:1.0: 4 ports detected
[    1.824035] usb 3-4: new high-speed USB device number 3 using ehci-pci
[    1.832051] usb 5-1: new full-speed USB device number 2 using ohci-pci
[    1.898828] ata4: SATA link down (SStatus 0 SControl 300)
[    2.033087] usb 5-1: New USB device found, idVendor=046d, idProduct=c52f
[    2.033129] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.033170] usb 5-1: Product: USB Receiver
[    2.033211] usb 5-1: Manufacturer: Logitech
[    2.040069] hidraw: raw HID events driver (C) Jiri Kosina
[    2.048194] usbcore: registered new interface driver usbhid
[    2.048238] usbhid: USB HID core driver
...

mihalan
Level 1
Level 1
Posts: 5
Joined: Tue Dec 25, 2018 10:13 am

Re: Solve boot problems with AMD and NVIDIA graphics cards

Post by mihalan » Sun Jan 06, 2019 7:00 pm

I solve the problem by adding in grub the parameter "radeon.dpm=0"

Post Reply

Return to “Installation & Boot”