cd burner?

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help
Post Reply
jasminedam
Level 1
Level 1
Posts: 1
Joined: Tue Mar 06, 2018 8:48 am

cd burner?

Post by jasminedam » Tue Mar 06, 2018 8:57 am

I can't find nautilus cd burner. gnomebaker don't work. brasero don't work. I miss k3b burning program. I can go back to centos 5 and use k3b or other linux distro's that have k3b. :(

User avatar
kc1di
Level 13
Level 13
Posts: 4705
Joined: Mon Sep 08, 2008 8:44 pm
Location: Maine USA

Re: cd burner?

Post by kc1di » Tue Mar 06, 2018 9:19 am

Hello jasminedam and Welcome to Linux Mint Forums,

You can install k3b in Mint no problem will work fine - in a terminal type this to install

Code: Select all

sudo apt install k3b
or you can use synaptic package manager and do a search for k3b. I use xfburn much of the time and it works great for general cd/dvd burning also. good luck.
with linux you have many choices. others may suggest other burners they like also.
Last edited by kc1di on Tue Mar 06, 2018 1:09 pm, edited 1 time in total.
Easy tips : https://sites.google.com/site/easylinuxtipsproject/
Linux Mint Installation Guide: http://linuxmint-installation-guide.rea ... en/latest/
Registered Linux User #462608

User avatar
Pjotr
Level 20
Level 20
Posts: 10882
Joined: Mon Mar 07, 2011 10:18 am
Location: The Netherlands (Holland)
Contact:

Re: cd burner?

Post by Pjotr » Tue Mar 06, 2018 9:22 am

Try Xfburn. My favourite for all non-KDE desktops.
Last edited by Pjotr on Wed Mar 07, 2018 7:47 am, edited 1 time in total.
Tip: 10 things to do after installing Linux Mint 19 Tara
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.

Cosmo.
Level 23
Level 23
Posts: 17829
Joined: Sat Dec 06, 2014 7:34 am

Re: cd burner?

Post by Cosmo. » Tue Mar 06, 2018 10:47 am

K3B works wonderfully also in a non-KDE environment. If you are used to it, use it.

Rocky Bennett
Level 4
Level 4
Posts: 386
Joined: Tue May 12, 2015 6:22 pm

Re: cd burner?

Post by Rocky Bennett » Tue Mar 06, 2018 7:39 pm

k3b is listed in the software manger of Linux Mint Cinnamon 18.3
I just went to the software store and installed it no problem.

User avatar
jimallyn
Level 18
Level 18
Posts: 8455
Joined: Thu Jun 05, 2014 7:34 pm
Location: Wenatchee, WA USA

Re: cd burner?

Post by jimallyn » Tue Mar 06, 2018 8:31 pm

k3b is one of the first things I install after doing a new Linux installation. It is available for all versions of Linux Mint. I'm guessing that you may not be familiar with installing programs on Linux Mint, else you probably would have found k3b already. Most beginners (I am told) prefer to install software with Software Manager, but I prefer to use Synaptic. Others like the command line, but I usually stick to GUI applications when they are available. Welcome to Linux Mint, jasminedam!
Image

“If the government were coming for your TVs and cars, then you'd be upset. But, as it is, they're only coming for your sons.” - Daniel Berrigan

User avatar
sbroccolo
Level 2
Level 2
Posts: 89
Joined: Wed May 10, 2017 6:59 pm
Location: Sacramento

Re: cd burner?

Post by sbroccolo » Wed Mar 07, 2018 7:44 am

I am also a big fan of k3b, I especially like it for burning bootable CD/DVDs for use on older machines that won't boot from a USB. I am currently on Linux Mint Cinnamon 18.3.
It's been so long, don't even remember how I installed it. It's in both the Software Manager and the Synaptic Package Manager. I probably used one of those.

iironjade
Level 4
Level 4
Posts: 273
Joined: Fri Jan 18, 2008 8:51 am
Location: London UK

Re: cd burner?

Post by iironjade » Wed Mar 07, 2018 10:44 am

Xfburn. K3b is useless.
"A good many dramatic situations begin with screaming."

Cosmo.
Level 23
Level 23
Posts: 17829
Joined: Sat Dec 06, 2014 7:34 am

Re: cd burner?

Post by Cosmo. » Wed Mar 07, 2018 10:48 am

Your post is incomplete. You missed to say, that k3b is useless for you. As a general rating this is simply wrong, what gets proven by the disks, which I and many, many other users have successfully burned.

User avatar
pbear
Level 5
Level 5
Posts: 564
Joined: Wed Jun 21, 2017 12:25 pm
Location: San Francisco

Re: cd burner?

Post by pbear » Wed Mar 07, 2018 12:10 pm

iironjade wrote:
Wed Mar 07, 2018 10:44 am
Xfburn. K3b is useless.
This isn't Twitter. If you're going to dispute the recommendation of three senior users, you should explain why. Without that, you're not helping the OP.
Time flies like an arrow. Fruit flies like a banana.
Running Mate 18.3 64 bit (by upgrade from 18.1-2)

Rocky Bennett
Level 4
Level 4
Posts: 386
Joined: Tue May 12, 2015 6:22 pm

Re: cd burner?

Post by Rocky Bennett » Wed Mar 07, 2018 1:08 pm

iironjade wrote:
Wed Mar 07, 2018 10:44 am
Xfburn. K3b is useless.


What does this even mean? Without data your post is useless.

User avatar
Jim Hauser
Level 5
Level 5
Posts: 506
Joined: Mon Jun 30, 2014 10:08 pm
Location: Pascagoula, Mississippi

Re: cd burner?

Post by Jim Hauser » Thu Mar 08, 2018 12:09 am

iironjade wrote:
Wed Mar 07, 2018 10:44 am
Xfburn. K3b is useless.
I have been using K3b on a regular basis for four years now without any problems. It comes default on KDE. The only time I have had problems burning a CD or DVD was because of certain media brands. My current choice for that is Memorex DVD-R. They have never failed me.

Rocky Bennett
Level 4
Level 4
Posts: 386
Joined: Tue May 12, 2015 6:22 pm

Re: cd burner?

Post by Rocky Bennett » Thu Mar 08, 2018 8:53 am

jasminedam wrote:
Tue Mar 06, 2018 8:57 am
I can't find nautilus cd burner. gnomebaker don't work. brasero don't work. I miss k3b burning program. I can go back to centos 5 and use k3b or other linux distro's that have k3b. :(


The good news for you is that if you are running Linux Mint 17.x or Linux Mint 18.x, k3b is right there in the software manager. Just click on the icon for the software manager, and click on k3b and install it. It is very quick and easy.

User avatar
pbear
Level 5
Level 5
Posts: 564
Joined: Wed Jun 21, 2017 12:25 pm
Location: San Francisco

Re: cd burner?

Post by pbear » Thu Mar 08, 2018 1:02 pm

leucocyte wrote:
Thu Mar 08, 2018 8:17 am
Anyway, for newbie and basic tasks I would recommend stuff like Brasero and for more experienced users and more advanced tasks K3B.
By the way, both are front end for quite the same command line tools (ie : cdrtools/cdrkit, cdrskin, growisofs, cdrdao).
Now THAT was very useful. I learned something. Thank you.
Time flies like an arrow. Fruit flies like a banana.
Running Mate 18.3 64 bit (by upgrade from 18.1-2)

Rocky Bennett
Level 4
Level 4
Posts: 386
Joined: Tue May 12, 2015 6:22 pm

Re: cd burner?

Post by Rocky Bennett » Thu Mar 08, 2018 3:25 pm

I'm thinking that the OP simply posted this cryptic post and completely left the stadium. Curious!!!

User avatar
JoeFootball
Level 6
Level 6
Posts: 1453
Joined: Tue Nov 24, 2009 1:52 pm
Location: /home/usa/mn/minneapolis/joe

Re: cd burner?

Post by JoeFootball » Thu Mar 08, 2018 3:27 pm

jasminedam wrote:I miss k3b burning program.
As others have noted, k3b is available in the repositories, but also be aware the downloading a single KDE-based application in a non-KDE desktop environment will additionally install many KDE base libraries as well.

Some users are sensitive to that, others don't mind. Your call. :)

Joe

User avatar
Spearmint2
Level 15
Level 15
Posts: 5719
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: cd burner?

Post by Spearmint2 » Thu Mar 08, 2018 4:11 pm

It seems jasmine has left the building.
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

Post Reply

Return to “Newbie Questions”