i would like to control 2 fans individually.
(as mentioned in my other post on kernel upgrade and consequences viewtopic.php?f=90&t=265980#p1445825, i'm now having problems with fancontrol/psensor)
I use two pwm fans in my case: one for the CPU, one for the HDDs.
The sensors found are
- Intel digital thermal sensor...
(driver `coretemp')
- Found `ITE IT8718F Super IO Sensors'
(address 0x290, driver `it87') .
- # Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon1=devices/platform/coretemp.0 hwmon2=devices/platform/it87.656
DEVNAME=hwmon1=coretemp hwmon2=it8718
FCTEMPS=hwmon2/device/pwm1=hwmon1/temp2_input
FCFANS= hwmon2/device/pwm1=hwmon2/device/fan1_input
MINTEMP=hwmon2/device/pwm1=20
MAXTEMP=hwmon2/device/pwm1=38
MINSTART=hwmon2/device/pwm1=145
MINSTOP=hwmon2/device/pwm1=75
MINPWM=hwmon2/device/pwm1=75
MAXPWM=hwmon2/device/pwm1=255.
While the CPU-fan (lmsensor it8718-isa-290 fan1) runs o.k., the HDD-fan (lmsensor it8718-isa-290 fan2) hardly starts. Especially that is bugging me, because now my HDDs are close to 40°C compared to less than 30°C before changing the kernel and fancontrol.
Is there a way of adding fan2 to fancontrol/pwmconfig by adding a line?
Do you have suggestions?