I am an happy user of Linux Mint 18 on my old but still very functional Dell Studio 1707.
I wanted to upgrade to Tara, installation worked fine, but unfortunately CPU usage on boot goes immediately near to 100% and stays there, with no application launched (as a comparison, on Mint 18 is about 10%).
I launched inxi, here is the result.
Any hint out there ?
Thanks in advance
Code: Select all
~$ inxi -Fxz
System: Host: Eschathologist Kernel: 4.15.0-20-generic x86_64
bits: 64 gcc: 7.3.0
Desktop: Cinnamon 3.8.6 (Gtk 3.22.30-1ubuntu1)
Distro: Linux Mint 19 Tara
Machine: Device: portable System: Dell product: Studio 1737 v: A09 serial: N/A
Mobo: Dell model: 0P786H v: A09 serial: N/A
BIOS: Dell v: A09 date: 04/14/2011
CPU: Dual core Intel Core2 Duo T5800 (-MCP-)
arch: Conroe rev.13 cache: 2048 KB
flags: (lm nx sse sse2 sse3 ssse3) bmips: 7980
clock speeds: max: 2000 MHz 1: 1995 MHz 2: 1995 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650]
bus-ID: 01:00.0
Display Server: x11 (X.Org 1.19.6 )
drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1440x900@60.06hz
OpenGL: renderer: AMD RV635 (DRM 2.50.0 / 4.15.0-20-generic, LLVM 6.0.0)
version: 3.3 Mesa 18.0.0-rc5 Direct Render: Yes
Audio: Card-1 Advanced Micro Devices [AMD/ATI] RV635 HDMI Audio [Radeon HD 3650/3730/3750]
driver: snd_hda_intel bus-ID: 01:00.1
Card-2 Intel 82801I (ICH9 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.15.0-20-generic
Network: Card-1: Broadcom Limited BCM4312 802.11b/g LP-PHY
driver: wl bus-ID: 04:00.0
IF: wlp4s0 state: up mac: <filter>
Card-2: Broadcom Limited NetLink BCM5784M Gigabit Ethernet PCIe
driver: tg3 v: 3.137 bus-ID: 08:00.0
IF: enp8s0 state: down mac: <filter>
Drives: HDD Total Size: 320.1GB (2.5% used)
ID-1: /dev/sda model: Hitachi_HTS54323 size: 320.1GB
Partition: ID-1: / size: 55G used: 7.6G (15%) fs: ext4 dev: /dev/sda8
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 77.0C mobo: 63.0C
Fan Speeds (in rpm): cpu: N/A fan-2: 3724 fan-3: 3730
Info: Processes: 201 Uptime: 13 min Memory: 1169.4/3910.7MB
Init: systemd runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.191) inxi: 2.3.56