Intel HD Graphics 3000 problem

Screen resolution, 3D Acceleration, nVidia, ATI
Forum rules
Before you post please read this
Post Reply
cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sat Aug 11, 2018 2:31 pm

Hi. I'm using the Intel HD Graphics 3000 card , I used to have Ubuntu 16 and Linux mint 18 without any problems but now everytime that I try to reproduce a video it's very slow on VLC or YouTube, for example.

When I look in the Driver manager I am just using a Wireless Network Adapter private driver.

Do I need to install the Intel graphic driver? if so, how I do it?
Is there any other thing that I should try?

Thanks.

User avatar
roblm
Level 9
Level 9
Posts: 2799
Joined: Sun Feb 24, 2013 2:41 pm

Re: Intel HD Graphics 3000 problem

Post by roblm » Sun Aug 12, 2018 8:20 am

The Release Notes for Mint 18.3 has this info:
If your Intel GPU is recent enough (2007 or newer) it is recommended to remove the legacy Intel driver "xserver-xorg-video-intel" and to use the built-in modesetting driver instead:

The legacy driver is no longer maintained and only useful for the old i800x and i900x family of chipsets.
Mint 18 used the intel driver but Mint 19 uses the modesetting driver. However, the xserver-xorg-video-intel package is still installed. You can try testing the intel driver. It was supposed to give better performance but was more buggy.

Use this command in the Terminal to create an xorg.conf file: sudo touch /etc/X11/xorg.conf

Then use this command to open the file for editing: xed admin:///etc/X11/xorg.conf

Add these lines:

Code: Select all

Section "Device"
   Identifier   "intel"
   Driver   "intel"
   Option  "AccelMethod"  "sna"   			
EndSection
Lot out and back in. If there is a problem getting back to the desktop, then press Ctrl+Alt+F1 to enter the virtual console tty1. Login and then use this command to remove the xorg.conf file and reboot: sudo rm /etc/X11/xorg.conf; reboot

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sun Aug 12, 2018 11:07 am

Thanks for your reply, unfortunately it didn't work.

I'm using Cinnamon desktop on Mint 19 (as you guess before), do you have any other suggestion?

User avatar
roblm
Level 9
Level 9
Posts: 2799
Joined: Sun Feb 24, 2013 2:41 pm

Re: Intel HD Graphics 3000 problem

Post by roblm » Sun Aug 12, 2018 11:31 am

Do you mean there was no improvement in playing videos or the method to load the intel driver failed to work?

User avatar
smurphos
Level 8
Level 8
Posts: 2246
Joined: Fri Sep 05, 2014 12:18 am
Location: Britisher...

Re: Intel HD Graphics 3000 problem

Post by smurphos » Sun Aug 12, 2018 11:31 am

Hi,

Check your browser's 3D acceleration settings. I've got similar hardware and no issues with browser video playback in Chrome other than a bit of a hike in CPU usage with 3D acceleration active in Chrome.

There are some video acceleration helper packages not installed by default which may also help I've only installed them since being on 19 and I can't say I've noticed any particular difference but they might help apt install va-drivers-all libvdpau-va-gl1 vdpau-va-driver

My inxi if you want to compare..

Code: Select all

inxi -Fxz
System:
  Host: HP-Pavilion-g6-Notebook-PC Kernel: 4.15.0-30-generic x86_64 bits: 64 
  compiler: gcc v: 7.3.0 Desktop: Cinnamon 3.8.8 Distro: Linux Mint 19 Tara 
  base: Ubuntu 18.04 LTS Bionic 
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion g6 Notebook PC 
  v: 0690120000204710000620100 serial: <filter> 
  Mobo: Hewlett-Packard model: 166F v: 09.4C serial: <filter> BIOS: Insyde 
  v: F.66 date: 01/24/2013 
Battery:
  ID-1: BAT0 charge: 35.9 Wh condition: 35.9/35.9 Wh (100%) 
  model: Hewlett-Packard Primary status: Full 
CPU:
  Topology: Dual Core model: Intel Core i5-2430M bits: 64 type: MT MCP 
  arch: Sandy Bridge rev: 7 L2 cache: 3072 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19156 
  Speed: 2827 MHz min/max: 800/3000 MHz Core speeds (MHz): 1: 2797 2: 2797 
  3: 2794 4: 2794 
Graphics:
  Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics 
  driver: i915 v: kernel bus ID: 00:02.0 
  Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa 
  resolution: 1366x768~60Hz 
  OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile v: 3.3 Mesa 18.0.5 
  direct render: Yes 
Audio:
  Card-1: Intel 6 Series/C200 Series Family High Definition Audio 
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  Sound Server: ALSA v: k4.15.0-30-generic 
Network:
  Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci 
  v: 2.3.0 bus ID: 01:00.0 
  IF: wlp1s0 state: up mac: <filter> 
  Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet 
  driver: r8169 v: 2.3LK-NAPI port: 3000 bus ID: 02:00.0 
  IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter> 
Drives:
  HDD Total Size: 1.59 TiB used: 886.81 GiB (54.4%) 
  ID-1: /dev/sda vendor: Seagate model: ST9750423AS size: 698.64 GiB 
  ID-2: /dev/sdb type: USB vendor: Seagate model: Expansion size: 931.51 GiB 
Partition:
  ID-1: / size: 58.42 GiB used: 14.55 GiB (24.9%) fs: ext4 dev: /dev/sda1 
  ID-2: /home size: 628.00 GiB used: 283.71 GiB (45.2%) fs: ext4 
  dev: /dev/sda5 
Sensors:
  System Temperatures: cpu: 74.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 262 Uptime: 2h 36m Memory: 5.77 GiB used: 1.90 GiB (32.9%) 
  Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19 
  inxi: 3.0.15 

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sun Aug 12, 2018 4:33 pm

roblm wrote:
Sun Aug 12, 2018 11:31 am
Do you mean there was no improvement in playing videos or the method to load the intel driver failed to work?
I meant that there was no improvement, I double check that the file was created correctly and even made a reboot. but didńt help.

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sun Aug 12, 2018 4:46 pm

smurphos wrote:
Sun Aug 12, 2018 11:31 am
Check your browser's 3D acceleration settings.

There are some video acceleration helper packages not installed by default apt install va-drivers-all libvdpau-va-gl1 vdpau-va-driver

My inxi if you want to compare..
I check using Chrome, Firefox, and Firefox Developer Edition. The problem persist. Also it's the same slow video reproduction on local files using VLC.

When I tried to install the packages you mention, there is a error telling me that apt can find the va-drivers-all package.

And finally thanks for sharing your setting, yes our hardware it's pretty similar but our graphics drivers aren't I feel like this has to do with my problem:

Code: Select all

Graphics:  Card: Intel 2nd Generation Core Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.00hz, 1360x768@60.02hz
           OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
           version: 3.3 Mesa 18.0.5 Direct Render: Yes
I feel like I may need to change to that i915 driver, i'll check how to do that .

User avatar
roblm
Level 9
Level 9
Posts: 2799
Joined: Sun Feb 24, 2013 2:41 pm

Re: Intel HD Graphics 3000 problem

Post by roblm » Sun Aug 12, 2018 7:07 pm

cosmefulanito2 wrote:
Sun Aug 12, 2018 4:46 pm
I feel like I may need to change to that i915 driver, i'll check how to do that .
That’s the name of the Intel graphics chipset, not the graphics driver.
EDITED: that's the name of the intel kernel module.

Was the graphics info you posted obtained after removing the /etc/X11/xorg.conf file I told you to create?
It shows there is software rendering of the graphics. Would you post the Xorg.0.log file. Use this command to open it:
xed /var/log/Xorg.0.log

Also post the output of this command: inxi -SMC
Last edited by roblm on Mon Aug 13, 2018 8:23 am, edited 1 time in total.

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sun Aug 12, 2018 7:30 pm

roblm wrote:
Sun Aug 12, 2018 7:07 pm

Was the graphics info you posted obtained after removing the /etc/X11/xorg.conf file I told you to create?
Yes it was
roblm wrote:
Sun Aug 12, 2018 7:07 pm
Would you post the Xorg.0.log file.

[ 41.871]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 41.871] X Protocol Version 11, Revision 0
[ 41.871] Build Operating System: Linux 4.4.0-119-generic x86_64 Ubuntu
[ 41.871] Current Operating System: Linux qwerty 4.15.0-30-generic #32-Ubuntu SMP Thu Jul 26 17:42:43 UTC 2018 x86_64
[ 41.871] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=e569f658-7bed-4af4-8c93-81d64cb97319 ro quiet splash vt.handoff=1
[ 41.871] Build Date: 13 April 2018 08:07:36PM
[ 41.871] xorg-server 2:1.19.6-1ubuntu4 (For technical support please see http://www.ubuntu.com/support)
[ 41.871] Current version of pixman: 0.34.0
[ 41.871] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 41.871] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41.871] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 12 16:30:45 2018
[ 41.871] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 41.871] (==) No Layout section. Using the first Screen section.
[ 41.871] (==) No screen section available. Using defaults.
[ 41.871] (**) |-->Screen "Default Screen Section" (0)
[ 41.871] (**) | |-->Monitor "<default monitor>"
[ 41.872] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 41.872] (==) Automatically adding devices
[ 41.872] (==) Automatically enabling devices
[ 41.872] (==) Automatically adding GPU devices
[ 41.872] (==) Automatically binding GPU devices
[ 41.872] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 41.872] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 41.872] Entry deleted from font path.
[ 41.872] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 41.872] Entry deleted from font path.
[ 41.872] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 41.872] Entry deleted from font path.
[ 41.872] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 41.872] Entry deleted from font path.
[ 41.872] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 41.872] Entry deleted from font path.
[ 41.872] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 41.872] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41.872] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.872] (II) Loader magic: 0x557b37c9c020
[ 41.872] (II) Module ABI versions:
[ 41.872] X.Org ANSI C Emulation: 0.4
[ 41.872] X.Org Video Driver: 23.0
[ 41.872] X.Org XInput driver : 24.1
[ 41.872] X.Org Server Extension : 10.0
[ 41.873] (++) using VT number 7

[ 41.873] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 41.873] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 41.890] (--) PCI:*(0:0:2:0) 8086:0116:103c:166d rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 41.890] (II) LoadModule: "glx"
[ 41.890] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.897] (II) Module glx: vendor="X.Org Foundation"
[ 41.897] compiled for 1.19.6, module version = 1.0.0
[ 41.897] ABI class: X.Org Server Extension, version 10.0
[ 41.897] (==) Matched modesetting as autoconfigured driver 0
[ 41.897] (==) Matched fbdev as autoconfigured driver 1
[ 41.897] (==) Matched vesa as autoconfigured driver 2
[ 41.897] (==) Assigned the driver to the xf86ConfigLayout
[ 41.897] (II) LoadModule: "modesetting"
[ 41.897] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 41.897] (II) Module modesetting: vendor="X.Org Foundation"
[ 41.897] compiled for 1.19.6, module version = 1.19.6
[ 41.897] Module class: X.Org Video Driver
[ 41.898] ABI class: X.Org Video Driver, version 23.0
[ 41.898] (II) LoadModule: "fbdev"
[ 41.898] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 41.898] (II) Module fbdev: vendor="X.Org Foundation"
[ 41.898] compiled for 1.19.3, module version = 0.4.4
[ 41.898] Module class: X.Org Video Driver
[ 41.898] ABI class: X.Org Video Driver, version 23.0
[ 41.898] (II) LoadModule: "vesa"
[ 41.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 41.898] (II) Module vesa: vendor="X.Org Foundation"
[ 41.898] compiled for 1.19.3, module version = 2.3.4
[ 41.898] Module class: X.Org Video Driver
[ 41.898] ABI class: X.Org Video Driver, version 23.0
[ 41.898] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 41.898] (II) FBDEV: driver for framebuffer: fbdev
[ 41.898] (II) VESA: driver for VESA chipsets: vesa
[ 41.924] (II) modeset(0): using drv /dev/dri/card0
[ 41.924] (WW) Falling back to old probe method for fbdev
[ 41.924] (II) Loading sub module "fbdevhw"
[ 41.924] (II) LoadModule: "fbdevhw"
[ 41.924] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 41.924] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 41.924] compiled for 1.19.6, module version = 0.0.2
[ 41.925] ABI class: X.Org Video Driver, version 23.0
[ 41.925] (WW) Falling back to old probe method for vesa
[ 41.925] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 41.925] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 41.925] (==) modeset(0): RGB weight 888
[ 41.925] (==) modeset(0): Default visual is TrueColor
[ 41.925] (II) Loading sub module "glamoregl"
[ 41.925] (II) LoadModule: "glamoregl"
[ 41.925] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 41.933] (II) Module glamoregl: vendor="X.Org Foundation"
[ 41.933] compiled for 1.19.6, module version = 1.0.0
[ 41.933] ABI class: X.Org ANSI C Emulation, version 0.4
[ 41.933] (II) glamor: OpenGL accelerated X.org driver based.
[ 41.962] (II) glamor: EGL version 1.4 (DRI2):
[ 41.966] (II) modeset(0): glamor initialized
[ 41.967] (II) modeset(0): Output LVDS-1 has no monitor section
[ 41.971] (II) modeset(0): Output VGA-1 has no monitor section
[ 42.048] (II) modeset(0): Output HDMI-1 has no monitor section
[ 42.128] (II) modeset(0): Output DP-1 has no monitor section
[ 42.128] (II) modeset(0): EDID for output LVDS-1
[ 42.128] (II) modeset(0): Manufacturer: CMN Model: 1480 Serial#: 0
[ 42.128] (II) modeset(0): Year: 2012 Week: 30
[ 42.128] (II) modeset(0): EDID Version: 1.3
[ 42.128] (II) modeset(0): Digital Display Input
[ 42.128] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 42.128] (II) modeset(0): Gamma: 2.20
[ 42.128] (II) modeset(0): No DPMS capabilities specified
[ 42.128] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42.128] (II) modeset(0): First detailed timing is preferred mode
[ 42.128] (II) modeset(0): redX: 0.589 redY: 0.340 greenX: 0.334 greenY: 0.569
[ 42.128] (II) modeset(0): blueX: 0.157 blueY: 0.152 whiteX: 0.313 whiteY: 0.329
[ 42.128] (II) modeset(0): Manufacturer's mask: 0
[ 42.128] (II) modeset(0): Supported detailed timing:
[ 42.128] (II) modeset(0): clock: 76.4 MHz Image Size: 309 x 174 mm
[ 42.128] (II) modeset(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0
[ 42.128] (II) modeset(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0
[ 42.128] (II) modeset(0): N140BGE-L23
[ 42.128] (II) modeset(0): CMN
[ 42.128] (II) modeset(0): N140BGE-L23
[ 42.128] (II) modeset(0): EDID (in hex):
[ 42.128] (II) modeset(0): 00ffffffffffff000dae801400000000
[ 42.128] (II) modeset(0): 1e160103801f11780acb459657559128
[ 42.128] (II) modeset(0): 27505400000001010101010101010101
[ 42.128] (II) modeset(0): 010101010101da1d56e250002030442d
[ 42.128] (II) modeset(0): 470035ae10000018000000fe004e3134
[ 42.128] (II) modeset(0): 304247452d4c32330a20000000fe0043
[ 42.128] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 42.128] (II) modeset(0): 004e3134304247452d4c32330a200061
[ 42.129] (II) modeset(0): Printing probed modes for output LVDS-1
[ 42.129] (II) modeset(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 42.129] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 42.129] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 42.129] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 42.129] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 42.129] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 42.129] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 42.129] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 42.129] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 42.129] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 42.129] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 42.129] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 42.129] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 42.129] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 42.129] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 42.129] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 42.129] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 42.129] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 42.129] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 42.129] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 42.129] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 42.129] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 42.129] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 42.134] (II) modeset(0): EDID for output VGA-1
[ 42.210] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 42.210] (II) modeset(0): EDID for output HDMI-1
[ 42.210] (II) modeset(0): Manufacturer: XXX Model: 0 Serial#: 16843009
[ 42.210] (II) modeset(0): Year: 2013 Week: 1
[ 42.210] (II) modeset(0): EDID Version: 1.3
[ 42.210] (II) modeset(0): Digital Display Input
[ 42.210] (II) modeset(0): Indeterminate output size
[ 42.210] (II) modeset(0): Gamma: 2.20
[ 42.210] (II) modeset(0): No DPMS capabilities specified
[ 42.210] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42.210] (II) modeset(0): First detailed timing is preferred mode
[ 42.210] (II) modeset(0): redX: 0.636 redY: 0.349 greenX: 0.290 greenY: 0.589
[ 42.210] (II) modeset(0): blueX: 0.143 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 42.210] (II) modeset(0): Supported established timings:
[ 42.210] (II) modeset(0): 720x400@70Hz
[ 42.210] (II) modeset(0): 640x480@60Hz
[ 42.210] (II) modeset(0): 640x480@72Hz
[ 42.210] (II) modeset(0): 640x480@75Hz
[ 42.210] (II) modeset(0): 800x600@60Hz
[ 42.210] (II) modeset(0): 800x600@72Hz
[ 42.210] (II) modeset(0): 800x600@75Hz
[ 42.210] (II) modeset(0): 1024x768@60Hz
[ 42.210] (II) modeset(0): 1024x768@70Hz
[ 42.210] (II) modeset(0): 1024x768@75Hz
[ 42.210] (II) modeset(0): Manufacturer's mask: 0
[ 42.210] (II) modeset(0): Supported detailed timing:
[ 42.210] (II) modeset(0): clock: 85.5 MHz Image Size: 760 x 450 mm
[ 42.210] (II) modeset(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 42.210] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 42.210] (II) modeset(0): Supported detailed timing:
[ 42.210] (II) modeset(0): clock: 79.5 MHz Image Size: 760 x 450 mm
[ 42.210] (II) modeset(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0
[ 42.210] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 778 v_blanking: 798 v_border: 0
[ 42.210] (II) modeset(0): Monitor name: WXGA TV
[ 42.210] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 65 kHz, PixClock max 149 MHz
[ 42.210] (II) modeset(0): Supported detailed timing:
[ 42.210] (II) modeset(0): clock: 148.5 MHz Image Size: 880 x 490 mm
[ 42.210] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.210] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 42.210] (II) modeset(0): Supported detailed timing:
[ 42.210] (II) modeset(0): clock: 74.2 MHz Image Size: 500 x 281 mm
[ 42.210] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.210] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 42.210] (II) modeset(0): Supported detailed timing:
[ 42.210] (II) modeset(0): clock: 27.0 MHz Image Size: 600 x 450 mm
[ 42.210] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 794 h_blank_end 858 h_border: 0
[ 42.210] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 42.210] (II) modeset(0): Supported detailed timing:
[ 42.210] (II) modeset(0): clock: 27.0 MHz Image Size: 800 x 450 mm
[ 42.210] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 42.210] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 42.210] (II) modeset(0): Number of EDID sections to follow: 1
[ 42.210] (II) modeset(0): EDID (in hex):
[ 42.210] (II) modeset(0): 00ffffffffffff006318000001010101
[ 42.210] (II) modeset(0): 01170103800000780ad7a5a2594a9624
[ 42.210] (II) modeset(0): 145054adce0001010101010101010101
[ 42.210] (II) modeset(0): 010101010101662150b051001b304070
[ 42.210] (II) modeset(0): 3600f8c22100001e0e1f008051001e30
[ 42.210] (II) modeset(0): 40803700f8c22100001c000000fc0057
[ 42.211] (II) modeset(0): 5847412054560a2020202020000000fd
[ 42.211] (II) modeset(0): 00324c1e410b000a2020202020200118
[ 42.211] (II) modeset(0): 02032df1509005040203060711121314
[ 42.211] (II) modeset(0): 15161f01202609070715072483010000
[ 42.211] (II) modeset(0): 6c030c001000001ec001010101023a80
[ 42.211] (II) modeset(0): 1871382d40582c450070ea3100001e01
[ 42.211] (II) modeset(0): 1d8018711c1620582c2500f419110000
[ 42.211] (II) modeset(0): 9e8c0ad08a20e02d10103a960058c221
[ 42.211] (II) modeset(0): 0000188c0ad08a20e02d10103e960020
[ 42.211] (II) modeset(0): c23100001800000000000000000000e9
[ 42.211] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 42.211] (II) modeset(0): Printing probed modes for output HDMI-1
[ 42.211] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
[ 42.211] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 42.211] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 42.211] (II) modeset(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 42.211] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 42.211] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 42.211] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 42.211] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42.211] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 42.211] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42.211] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 794 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 42.211] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 42.211] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.211] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42.293] (II) modeset(0): EDID for output DP-1
[ 42.293] (II) modeset(0): Output LVDS-1 connected
[ 42.294] (II) modeset(0): Output VGA-1 disconnected
[ 42.294] (II) modeset(0): Output HDMI-1 connected
[ 42.294] (II) modeset(0): Output DP-1 disconnected
[ 42.294] (II) modeset(0): Using spanning desktop for initial modes
[ 42.294] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 42.294] (II) modeset(0): Output HDMI-1 using initial mode 1360x768 +1366+0
[ 42.294] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 42.294] (==) modeset(0): DPI set to (96, 96)
[ 42.294] (II) Loading sub module "fb"
[ 42.294] (II) LoadModule: "fb"
[ 42.294] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 42.294] (II) Module fb: vendor="X.Org Foundation"
[ 42.294] compiled for 1.19.6, module version = 1.0.0
[ 42.294] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.294] (II) UnloadModule: "fbdev"
[ 42.294] (II) Unloading fbdev
[ 42.294] (II) UnloadSubModule: "fbdevhw"
[ 42.294] (II) Unloading fbdevhw
[ 42.294] (II) UnloadModule: "vesa"
[ 42.294] (II) Unloading vesa
[ 42.294] (==) Depth 24 pixmap format is 32 bpp
[ 42.424] (==) modeset(0): Backing store enabled
[ 42.424] (==) modeset(0): Silken mouse enabled
[ 42.424] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 42.504] (==) modeset(0): DPMS enabled
[ 42.504] (II) modeset(0): [DRI2] Setup complete
[ 42.504] (II) modeset(0): [DRI2] DRI driver: i965
[ 42.504] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 42.504] (--) RandR disabled
[ 42.514] (II) SELinux: Disabled on system
[ 42.527] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 42.527] (II) AIGLX: enabled GLX_ARB_create_context
[ 42.527] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 42.527] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 42.527] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 42.527] (II) AIGLX: enabled GLX_SGI_swap_control
[ 42.527] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 42.527] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 42.527] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 42.527] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 42.527] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 42.527] (II) AIGLX: Loaded and initialized i965
[ 42.527] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 42.529] (II) modeset(0): Damage tracking initialized
[ 42.529] (II) modeset(0): Setting screen physical size to 721 x 203
[ 42.577] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 42.577] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 42.577] (II) LoadModule: "libinput"
[ 42.577] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 42.582] (II) Module libinput: vendor="X.Org Foundation"
[ 42.582] compiled for 1.19.6, module version = 0.27.1
[ 42.582] Module class: X.Org XInput Driver
[ 42.582] ABI class: X.Org XInput driver, version 24.1
[ 42.582] (II) Using input driver 'libinput' for 'Power Button'
[ 42.582] (**) Power Button: always reports core events
[ 42.582] (**) Option "Device" "/dev/input/event2"
[ 42.582] (**) Option "_source" "server/udev"
[ 42.582] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 42.582] (II) event2 - Power Button: device is a keyboard
[ 42.582] (II) event2 - Power Button: device removed
[ 42.606] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 42.607] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 42.607] (**) Option "xkb_model" "pc105"
[ 42.607] (**) Option "xkb_layout" "latam"
[ 42.637] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 42.637] (II) event2 - Power Button: device is a keyboard
[ 42.638] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 42.638] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 42.638] (II) Using input driver 'libinput' for 'Video Bus'
[ 42.638] (**) Video Bus: always reports core events
[ 42.638] (**) Option "Device" "/dev/input/event4"
[ 42.638] (**) Option "_source" "server/udev"
[ 42.639] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 42.639] (II) event4 - Video Bus: device is a keyboard
[ 42.639] (II) event4 - Video Bus: device removed
[ 42.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6/event4"
[ 42.660] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 42.660] (**) Option "xkb_model" "pc105"
[ 42.660] (**) Option "xkb_layout" "latam"
[ 42.662] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 42.662] (II) event4 - Video Bus: device is a keyboard
[ 42.663] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 42.663] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 42.663] (II) Using input driver 'libinput' for 'Power Button'
[ 42.663] (**) Power Button: always reports core events
[ 42.663] (**) Option "Device" "/dev/input/event1"
[ 42.663] (**) Option "_source" "server/udev"
[ 42.664] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 42.665] (II) event1 - Power Button: device is a keyboard
[ 42.665] (II) event1 - Power Button: device removed
[ 42.692] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 42.692] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 42.692] (**) Option "xkb_model" "pc105"
[ 42.692] (**) Option "xkb_layout" "latam"
[ 42.694] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 42.694] (II) event1 - Power Button: device is a keyboard
[ 42.695] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 42.695] (II) No input driver specified, ignoring this device.
[ 42.695] (II) This device may have been added with another device file.
[ 42.697] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 42.697] (II) No input driver specified, ignoring this device.
[ 42.697] (II) This device may have been added with another device file.
[ 42.698] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 42.698] (II) No input driver specified, ignoring this device.
[ 42.698] (II) This device may have been added with another device file.
[ 42.699] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 42.699] (II) No input driver specified, ignoring this device.
[ 42.699] (II) This device may have been added with another device file.
[ 42.701] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 42.701] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 42.701] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 42.701] (**) Logitech USB Keyboard: always reports core events
[ 42.701] (**) Option "Device" "/dev/input/event5"
[ 42.701] (**) Option "_source" "server/udev"
[ 42.703] (II) event5 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 42.703] (II) event5 - Logitech USB Keyboard: device is a keyboard
[ 42.703] (II) event5 - Logitech USB Keyboard: device removed
[ 42.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C31C.0001/input/input7/event5"
[ 42.716] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 42.716] (**) Option "xkb_model" "pc105"
[ 42.716] (**) Option "xkb_layout" "latam"
[ 42.718] (II) event5 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 42.718] (II) event5 - Logitech USB Keyboard: device is a keyboard
[ 42.720] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event6)
[ 42.720] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 42.720] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 42.721] (**) Logitech USB Keyboard: always reports core events
[ 42.721] (**) Option "Device" "/dev/input/event6"
[ 42.721] (**) Option "_source" "server/udev"
[ 42.722] (II) event6 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 42.722] (II) event6 - Logitech USB Keyboard: device is a keyboard
[ 42.722] (II) event6 - Logitech USB Keyboard: device removed
[ 42.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C31C.0002/input/input8/event6"
[ 42.740] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 42.740] (**) Option "xkb_model" "pc105"
[ 42.740] (**) Option "xkb_layout" "latam"
[ 42.742] (II) event6 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 42.742] (II) event6 - Logitech USB Keyboard: device is a keyboard
[ 42.744] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[ 42.744] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 42.744] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 42.744] (**) Logitech USB Optical Mouse: always reports core events
[ 42.744] (**) Option "Device" "/dev/input/event7"
[ 42.744] (**) Option "_source" "server/udev"
[ 42.746] (II) event7 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 42.746] (II) event7 - Logitech USB Optical Mouse: device set to 1000 DPI
[ 42.746] (II) event7 - Logitech USB Optical Mouse: device is a pointer
[ 42.746] (II) event7 - Logitech USB Optical Mouse: device removed
[ 42.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C05A.0003/input/input9/event7"
[ 42.780] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 42.781] (**) Option "AccelerationScheme" "none"
[ 42.781] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 42.781] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 42.781] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 42.783] (II) event7 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 42.783] (II) event7 - Logitech USB Optical Mouse: device set to 1000 DPI
[ 42.784] (II) event7 - Logitech USB Optical Mouse: device is a pointer
[ 42.786] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 42.786] (II) No input driver specified, ignoring this device.
[ 42.786] (II) This device may have been added with another device file.
[ 42.789] (II) config/udev: Adding input device HP Webcam-101: HP Webcam-101 (/dev/input/event13)
[ 42.789] (**) HP Webcam-101: HP Webcam-101: Applying InputClass "libinput keyboard catchall"
[ 42.789] (II) Using input driver 'libinput' for 'HP Webcam-101: HP Webcam-101'
[ 42.789] (**) HP Webcam-101: HP Webcam-101: always reports core events
[ 42.789] (**) Option "Device" "/dev/input/event13"
[ 42.789] (**) Option "_source" "server/udev"
[ 42.790] (II) event13 - HP Webcam-101: HP Webcam-101: is tagged by udev as: Keyboard
[ 42.790] (II) event13 - HP Webcam-101: HP Webcam-101: device is a keyboard
[ 42.790] (II) event13 - HP Webcam-101: HP Webcam-101: device removed
[ 42.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14/event13"
[ 42.824] (II) XINPUT: Adding extended input device "HP Webcam-101: HP Webcam-101" (type: KEYBOARD, id 12)
[ 42.824] (**) Option "xkb_model" "pc105"
[ 42.824] (**) Option "xkb_layout" "latam"
[ 42.825] (II) event13 - HP Webcam-101: HP Webcam-101: is tagged by udev as: Keyboard
[ 42.825] (II) event13 - HP Webcam-101: HP Webcam-101: device is a keyboard
[ 42.826] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 42.826] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 42.826] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 42.826] (**) AT Translated Set 2 keyboard: always reports core events
[ 42.826] (**) Option "Device" "/dev/input/event3"
[ 42.826] (**) Option "_source" "server/udev"
[ 42.827] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 42.827] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 42.827] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 42.844] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 42.844] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 42.844] (**) Option "xkb_model" "pc105"
[ 42.844] (**) Option "xkb_layout" "latam"
[ 42.845] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 42.845] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 42.846] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 42.846] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 42.846] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 42.846] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 42.846] (**) Option "Device" "/dev/input/event8"
[ 42.846] (**) Option "_source" "server/udev"
[ 42.847] (II) event8 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 42.847] (II) event8 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 42.847] (II) event8 - SynPS/2 Synaptics TouchPad: device removed
[ 42.948] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event8"
[ 42.948] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 42.948] (**) Option "AccelerationScheme" "none"
[ 42.949] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 42.949] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 42.949] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 42.951] (II) event8 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 42.952] (II) event8 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 42.953] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 42.953] (II) No input driver specified, ignoring this device.
[ 42.953] (II) This device may have been added with another device file.
[ 42.961] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 42.961] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 42.961] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 42.961] (**) HP WMI hotkeys: always reports core events
[ 42.961] (**) Option "Device" "/dev/input/event9"
[ 42.961] (**) Option "_source" "server/udev"
[ 42.962] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 42.962] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 42.962] (II) event9 - HP WMI hotkeys: device removed
[ 42.976] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[ 42.976] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 42.976] (**) Option "xkb_model" "pc105"
[ 42.976] (**) Option "xkb_layout" "latam"
[ 42.977] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 42.977] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 49.053] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 49.053] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.053] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 49.136] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 49.136] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 49.235] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 49.235] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.235] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 49.316] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 49.316] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 49.543] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 49.544] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.544] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 49.626] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 49.626] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 49.720] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 49.720] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.720] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 49.806] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 49.806] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 50.204] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 50.204] (II) modeset(0): Printing DDC gathered Modelines:
[ 50.204] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 50.285] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 50.285] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 50.485] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 50.485] (II) modeset(0): Printing DDC gathered Modelines:
[ 50.485] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 50.569] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 50.569] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 6879.904] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 6879.904] (II) modeset(0): Printing DDC gathered Modelines:
[ 6879.904] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 6879.998] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 6879.998] (II) modeset(0): Printing DDC gathered Modelines:
[ 6879.998] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 6880.143] (II) modeset(0): Allocate new frame buffer 1366x768 stride
[ 6880.293] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 6880.293] (II) modeset(0): Printing DDC gathered Modelines:
[ 6880.293] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 6880.374] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 6880.374] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 6880.478] (II) modeset(0): Allocate new frame buffer 2726x768 stride
[ 6880.777] (II) modeset(0): EDID vendor "CMN", prod id 5248
[ 6880.777] (II) modeset(0): Printing DDC gathered Modelines:
[ 6880.777] (II) modeset(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 6880.855] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 6880.855] (--) modeset(0): HDMI max TMDS frequency 150000KHz
roblm wrote:
Sun Aug 12, 2018 7:07 pm
Also post the output of this command: inxi -SMC

Code: Select all

System:    Host: qwerty Kernel: 4.15.0-30-generic x86_64 bits: 64
           Desktop: Cinnamon 3.8.8  Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: Hewlett-Packard product: HP Pavilion g4 Notebook PC v: 068F130000204710000620100 serial: N/A
           Mobo: Hewlett-Packard model: 166D v: 09.4B serial: N/A
           BIOS: Insyde v: F.63 date: 03/22/2012
CPU:       Dual core Intel Core i3-2330M (-MT-MCP-) cache: 3072 KB
           clock speeds: max: 2200 MHz 1: 1995 MHz 2: 1995 MHz 3: 1995 MHz
           4: 1995 MHz


User avatar
roblm
Level 9
Level 9
Posts: 2799
Joined: Sun Feb 24, 2013 2:41 pm

Re: Intel HD Graphics 3000 problem

Post by roblm » Sun Aug 12, 2018 7:52 pm

I assumed you would add the log’s output to a code display window, like you did with the inxi output. Or perhaps there were too many lines. When you select the </> button in the forum reply window, it will cut off long lines. I need to see one of those lines. Use this command to get the first 9 lines: head -n 9 /var/log/Xorg.0.log

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sun Aug 12, 2018 7:57 pm

Code: Select all

[    41.871] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    41.871] X Protocol Version 11, Revision 0
[    41.871] Build Operating System: Linux 4.4.0-119-generic x86_64 Ubuntu
[    41.871] Current Operating System: Linux qwerty 4.15.0-30-generic #32-Ubuntu SMP Thu Jul 26 17:42:43 UTC 2018 x86_64
[    41.871] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=e569f658-7bed-4af4-8c93-81d64cb97319 ro quiet splash vt.handoff=1
[    41.871] Build Date: 13 April 2018  08:07:36PM
[    41.871] xorg-server 2:1.19.6-1ubuntu4 (For technical support please see http://www.ubuntu.com/support) 

User avatar
roblm
Level 9
Level 9
Posts: 2799
Joined: Sun Feb 24, 2013 2:41 pm

Re: Intel HD Graphics 3000 problem

Post by roblm » Sun Aug 12, 2018 8:05 pm

Use these commands and post the output:

Code: Select all

ls /etc/X11
ls /etc/modprobe.d
ls /usr/share/X11/xorg.conf.d

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Sun Aug 12, 2018 8:13 pm

ls /etc/X11

Code: Select all

app-defaults             fonts    xinit  Xreset    Xresources  Xsession.d        xsm         Xwrapper.config
default-display-manager  rgb.txt  xkb    Xreset.d  Xsession    Xsession.options  XvMCConfig
ls /etc/modprobe.d

Code: Select all

alsa-base.conf                  blacklist-bcm43.conf     blacklist-framebuffer.conf  blacklist-rare-network.conf     iwlwifi.conf
amd64-microcode-blacklist.conf  blacklist.conf           blacklist-modem.conf        dkms.conf
blacklist-ath_pci.conf          blacklist-firewire.conf  blacklist-oss.conf          intel-microcode-blacklist.conf
ls /usr/share/X11/xorg.conf.d

Code: Select all

10-amdgpu.conf  10-quirks.conf  10-radeon.conf  40-libinput.conf  70-wacom.conf

User avatar
roblm
Level 9
Level 9
Posts: 2799
Joined: Sun Feb 24, 2013 2:41 pm

Re: Intel HD Graphics 3000 problem

Post by roblm » Sun Aug 12, 2018 8:25 pm

Is there an external monitor connected to the notebook's HDMI port using the same 1366x768 resolution as the notebook’s screen?

I don't see any obvious errors do far. I won't be back online until tomorrow.


EDITED 8-13-18: Post the output of this command: ls -l /usr/lib/x86_64-linux-gnu/ | egrep -i "libegl_mesa*|libglx_mesa*"
Last edited by roblm on Mon Aug 13, 2018 8:56 am, edited 1 time in total.

User avatar
smurphos
Level 8
Level 8
Posts: 2246
Joined: Fri Sep 05, 2014 12:18 am
Location: Britisher...

Re: Intel HD Graphics 3000 problem

Post by smurphos » Mon Aug 13, 2018 12:16 am

cosmefulanito2 wrote:
Sun Aug 12, 2018 4:46 pm

Code: Select all

           OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
You are running a software rendering session. I take it you are not getting a warning on login regarding software rendering?

Assuming not, log off, and on the login screen click the Cinnamon icon next to your user name and double-check that the regular session is selected before logging back in. Rerun your inxi. Test video playback.

cosmefulanito2
Level 1
Level 1
Posts: 8
Joined: Sat Aug 11, 2018 2:16 pm

Re: Intel HD Graphics 3000 problem

Post by cosmefulanito2 » Thu Aug 30, 2018 6:00 pm


You are running a software rendering session. I take it you are not getting a warning on login regarding software rendering?

Assuming not, log off, and on the login screen click the Cinnamon icon next to your user name and double-check that the regular session is selected before logging back in. Rerun your inxi. Test video playback.
Thanks a lot man, I feel like an idiot now. That was the problem it's now working well, thanks again for your help

Post Reply

Return to “Graphics Cards & Monitors”