LM18.3 queries on boot fsck check [SOLVED]

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
lazarus

LM18.3 queries on boot fsck check [SOLVED]

Post by lazarus »

LM18.3 Cinnamon

Of late I've noticed grub forcing a fs check every boot. It's usually only a momentary, almost subliminal, flash of text underneath the LM loading logo.

I've no problems with this, quite happy for it to do so. Except...

1. Has LM18+ always done this? I can't say that I'd noticed it at all until this last week. So I'm wondering if I've simply been blind all this time, an update has disabled the fastboot option in grub or maybe my new boot drive is already failing. (Would the RAID to be mounted this early?)

2. Every so often, instead of a quick flash of text I can actually see the % counter whizzing thru 0 to 100%. It still only takes a second or so but it does suggest that there was something that needed checking, no matter how quickly it is checked. And that does concern me, as this system is almost always shut down correctly. ("Almost," purely because I have no control over the power supply and 'Acts of God.'.)

I cannot find any reference to a fsck being performed in the logfiles... but perhaps I'm looking in the wrong places. :?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

lazarus wrote: ⤴Sat Aug 18, 2018 12:37 am 1. Has LM18+ always done this?
No.
lazarus wrote:(Would the RAID to be mounted this early?)
Possibly.
lazarus wrote: 2. Every so often, instead of a quick flash of text I can actually see the % counter whizzing thru 0 to 100%. It still only takes a second or so but it does suggest that there was something that needed checking..."
Yes, it does.
lazarus wrote: I cannot find any reference to a fsck being performed in the logfiles... but perhaps I'm looking in the wrong places. :?
Please post the output of this terminal command:

Code: Select all

dmesg
Enclose the results between [ⅽode] and [/ⅽode] code markers by selecting </> from the mini toolbar above the textbox where you type your reply.

Do the same for inxi -Fxz
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

Hmmm... dmesg generates output longer than the forum will accept. You prefer it trimmed or in multi-part?

In the meantime...

Code: Select all

lazarus@Beelzebub ~ $ inxi -Fxz
System:    Host: Beelzebub Kernel: 4.15.0-32-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
           Distro: Linux Mint 18.3 Sylvia
Machine:   Mobo: ASRock model: 890FX Deluxe4
           Bios: American Megatrends v: P1.50 date: 11/23/2010
CPU:       Hexa core AMD Phenom II X6 1100T (-MCP-) cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 39774
           clock speeds: max: 3300 MHz 1: 1702 MHz 2: 803 MHz 3: 803 MHz
           4: 804 MHz 5: 803 MHz 6: 803 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM]
           bus-ID: 05:00.0
           Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1366x768@66.36hz
           GLX Renderer: AMD BONAIRE (DRM 2.50.0 / 4.15.0-32-generic, LLVM 6.0.0)
           GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Tobago HDMI Audio [Radeon R7 360 / R9 360 OEM]
           driver: snd_hda_intel bus-ID: 05:00.1
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2
           Sound: Advanced Linux Sound Architecture v: k4.15.0-32-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d800 bus-ID: 04:00.0
           IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 7001.4GB (22.4% used)
           ID-1: /dev/sda model: ST3000DM001 size: 3000.6GB
           ID-2: /dev/sdb model: WDC_WD10EACS size: 1000.2GB
           ID-3: /dev/sdc model: WDC_WD10EARS size: 1000.2GB
           ID-4: /dev/sdd model: WDC_WD10EARS size: 1000.2GB
           ID-5: /dev/sde model: WDC_WD10EZEX size: 1000.2GB
Partition: ID-1: / size: 94G used: 13G (15%) fs: ext4 dev: /dev/sda3
           ID-2: /home size: 2.1T used: 285G (15%) fs: ext4 dev: /dev/md0
           ID-3: swap-1 size: 49.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID:      Device-1: /dev/md0 - active components: online: sdc1[1] sdb1[0] sdd1[2] sde1[4]
           Info: raid: 5 report: 4/4 blocks: 2197321728 chunk size: 128k bitmap: true
           Device-2: /dev/md1 - active components: online: sdc2[1] sdb2[0] sde2[4] sdd2[2]
           Info: raid: 5 report: 4/4 blocks: 732174336 chunk size: 128k bitmap: true
Sensors:   System Temperatures: cpu: 31.0C mobo: 28.0C gpu: 27.0
           Fan Speeds (in rpm): cpu: N/A fan-1: 1917 fan-2: 3375 fan-3: 0
Info:      Processes: 223 Uptime: 1:39 Memory: 3656.8/15975.3MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

/nvm. Multipart it is. ;)

Code: Select all

lazarus@Beelzebub ~ $ dmesg
[    0.000000] Linux version 4.15.0-32-generic (buildd@lgw01-amd64-038) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #35~16.04.1-Ubuntu SMP Fri Aug 10 21:54:34 UTC 2018 (Ubuntu 4.15.0-32.35~16.04.1-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic root=UUID=278d1161-c211-40b2-b212-0fdad4f9bca9 ro amd_iommu=fullflush iommu=pt quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7e9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7ea0000-0x00000000c7eaffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c7eb0000-0x00000000c7edffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c7ee0000-0x00000000c7efffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe4, BIOS P1.50 11/23/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x438000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000438000000 aka 17280M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xc7ea0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x42413f000, 0x42413ffff] PGTABLE
[    0.000000] BRK [0x424140000, 0x424140fff] PGTABLE
[    0.000000] BRK [0x424141000, 0x424141fff] PGTABLE
[    0.000000] BRK [0x424142000, 0x424142fff] PGTABLE
[    0.000000] BRK [0x424143000, 0x424143fff] PGTABLE
[    0.000000] BRK [0x424144000, 0x424144fff] PGTABLE
[    0.000000] BRK [0x424145000, 0x424145fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3154c000-0x34a9dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB100 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000C7EA0000 000048 (v01 112310 RSDT1200 20101123 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000C7EA0200 000084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000C7EA0460 007947 (v01 AS411  AS411142 00000142 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000C7EB0000 000040
[    0.000000] ACPI: APIC 0x00000000C7EA0390 000088 (v01 112310 APIC1200 20101123 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000C7EA0420 00003C (v01 112310 OEMMCFG  20101123 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000C7EB0040 000075 (v01 112310 OEMB1200 20101123 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x00000000C7EAA460 000108 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: AAFT 0x00000000C7EAA570 000027 (v01 112310 OEMAAFT  20101123 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C7EAA5A0 000038 (v01 112310 OEMHPET  20101123 MSFT 00000097)
[    0.000000] ACPI: IVRS 0x00000000C7EAA5E0 0000D0 (v01 AMD    RD890S   00202031 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000C7EAA6B0 000DA4 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x437ffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x437ffffff] -> [mem 0x00000000-0x437ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x437fd5000-0x437ffffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000437ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c7e9ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000437ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000437ffffff]
[    0.000000] On node 0 totalpages: 4193850
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12731 pages used for memmap
[    0.000000]   DMA32 zone: 814752 pages, LIFO batch:31
[    0.000000]   Normal zone: 52736 pages used for memmap
[    0.000000]   Normal zone: 3375104 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 102 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ea0000-0xc7eaffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7eb0000-0xc7edffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ee0000-0xc7efffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc7f00000-0xffefffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4128298
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic root=UUID=278d1161-c211-40b2-b212-0fdad4f9bca9 ro amd_iommu=fullflush iommu=pt quiet splash vt.handoff=7
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x6006000000-0x6007ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[    0.000000] Memory: 16297800K/16775400K available (12300K kernel code, 2470K rwdata, 4252K rodata, 2408K init, 2416K bss, 477600K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 39122 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 524544, nr_irqs: 1016, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] [Firmware Bug]: AMD-Vi: IOAPIC[6] not in IVRS table
[    0.000000] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[    0.000000] AMD-Vi: Disabling interrupt remapping
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3314.567 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.13 BogoMIPS (lpj=13258268)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028094] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.030063] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030140] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.030203] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.030400] mce: CPU supports 6 MCE banks
[    0.030405] LVT offset 0 assigned for vector 0xf9
[    0.030407] process: using AMD E400 aware idle routine
[    0.030409] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.030409] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.030411] Spectre V2 : Mitigation: Full AMD retpoline
[    0.030412] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.030513] Freeing SMP alternatives memory: 36K
[    0.032006] process: System has AMD C1E enabled
[    0.036000] process: Switch to broadcast mode on CPU0
[    0.036000] smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor (family: 0x10, model: 0xa, stepping: 0x0)
[    0.036000] Performance Events: AMD PMU driver.
[    0.036000] ... version:                0
[    0.036000] ... bit width:              48
[    0.036000] ... generic registers:      4
[    0.036000] ... value mask:             0000ffffffffffff
[    0.036000] ... max period:             00007fffffffffff
[    0.036000] ... fixed-purpose events:   0
[    0.036000] ... event mask:             000000000000000f
[    0.036000] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1
[    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.004000] process: Switch to broadcast mode on CPU1
[    0.036000]  #2
[    0.004000] process: Switch to broadcast mode on CPU2
[    0.036068]  #3
[    0.004000] process: Switch to broadcast mode on CPU3
[    0.040068]  #4
[    0.004000] process: Switch to broadcast mode on CPU4
[    0.044075]  #5
[    0.004000] process: Switch to broadcast mode on CPU5
[    0.048059] smp: Brought up 1 node, 6 CPUs
[    0.048059] smpboot: Max logical packages: 1
[    0.048059] smpboot: Total of 6 processors activated (39774.80 BogoMIPS)
[    0.056671] devtmpfs: initialized
[    0.056671] x86/mm: Memory block size: 128MB
[    0.057128] evm: security.selinux
[    0.057129] evm: security.SMACK64
[    0.057129] evm: security.SMACK64EXEC
[    0.057129] evm: security.SMACK64TRANSMUTE
[    0.057130] evm: security.SMACK64MMAP
[    0.057130] evm: security.apparmor
[    0.057130] evm: security.ima
[    0.057131] evm: security.capability
[    0.057162] PM: Registering ACPI NVS region [mem 0xc7eb0000-0xc7edffff] (196608 bytes)
[    0.057162] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.057162] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.057162] pinctrl core: initialized pinctrl subsystem
[    0.057162] RTC time:  3:50:26, date: 08/18/18
[    0.057162] NET: Registered protocol family 16
[    0.057162] audit: initializing netlink subsys (disabled)
[    0.057162] audit: type=2000 audit(1534564226.056:1): state=initialized audit_enabled=0 res=1
[    0.057162] cpuidle: using governor ladder
[    0.057162] cpuidle: using governor menu
[    0.057162] node 0 link 0: io port [1000, ffffff]
[    0.057162] TOM: 00000000c8000000 aka 3200M
[    0.057162] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.057162] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.057162] node 0 link 0: mmio [f0000000, ffffffff]
[    0.057162] node 0 link 0: mmio [a0000, bffff]
[    0.057162] node 0 link 0: mmio [c8000000, dfffffff]
[    0.057162] TOM2: 0000000438000000 aka 17280M
[    0.057162] bus: [bus 00-07] on node 0 link 0
[    0.057162] bus: 00 [io  0x0000-0xffff]
[    0.057162] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.057162] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.057162] bus: 00 [mem 0xc8000000-0xdfffffff]
[    0.057162] bus: 00 [mem 0x438000000-0xfcffffffff]
[    0.057162] ACPI: bus type PCI registered
[    0.057162] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.057162] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.057162] PCI: not using MMCONFIG
[    0.057162] PCI: Using configuration type 1 for base access
[    0.057162] PCI: Using configuration type 1 for extended access
[    0.057162] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.057162] mtrr: probably your BIOS does not setup all CPUs.
[    0.057162] mtrr: corrected configuration.
[    0.060588] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.060588] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.060588] ACPI: Added _OSI(Module Device)
[    0.060588] ACPI: Added _OSI(Processor Device)
[    0.060588] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.060588] ACPI: Added _OSI(Processor Aggregator Device)
[    0.060588] ACPI: Added _OSI(Linux-Dell-Video)
[    0.060588] ACPI: Executed 3 blocks of module-level executable AML code
[    0.065750] ACPI: Interpreter enabled
[    0.065750] ACPI: (supports S0 S1 S3 S4 S5)
[    0.065750] ACPI: Using IOAPIC for interrupt routing
[    0.065750] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.065915] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.065926] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.066240] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.070958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.070963] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.070967] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.071239] PCI host bridge to bus 0000:00
[    0.071241] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.071242] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.071243] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.071244] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.071245] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[    0.071246] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.071247] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.071255] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000
[    0.071355] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    0.071443] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.071457] pci 0000:00:02.0: enabling Extended Tags
[    0.071475] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.071548] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.071561] pci 0000:00:04.0: enabling Extended Tags
[    0.071578] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.071647] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.071660] pci 0000:00:05.0: enabling Extended Tags
[    0.071677] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.071743] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    0.071756] pci 0000:00:06.0: enabling Extended Tags
[    0.071772] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.071840] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.071854] pci 0000:00:0a.0: enabling Extended Tags
[    0.071870] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.071944] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.071960] pci 0000:00:11.0: reg 0x10: [io  0xa000-0xa007]
[    0.071966] pci 0000:00:11.0: reg 0x14: [io  0x9000-0x9003]
[    0.071972] pci 0000:00:11.0: reg 0x18: [io  0x8000-0x8007]
[    0.071979] pci 0000:00:11.0: reg 0x1c: [io  0x7000-0x7003]
[    0.071985] pci 0000:00:11.0: reg 0x20: [io  0x6000-0x600f]
[    0.071991] pci 0000:00:11.0: reg 0x24: [mem 0xfe5ffc00-0xfe5fffff]
[    0.072112] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.072125] pci 0000:00:12.0: reg 0x10: [mem 0xfe5fe000-0xfe5fefff]
[    0.072248] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.072263] pci 0000:00:12.2: reg 0x10: [mem 0xfe5ff800-0xfe5ff8ff]
[    0.072319] pci 0000:00:12.2: supports D1 D2
[    0.072320] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.072394] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.072407] pci 0000:00:13.0: reg 0x10: [mem 0xfe5fd000-0xfe5fdfff]
[    0.072533] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.072547] pci 0000:00:13.2: reg 0x10: [mem 0xfe5ff400-0xfe5ff4ff]
[    0.072602] pci 0000:00:13.2: supports D1 D2
[    0.072603] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.072674] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.072787] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.072804] pci 0000:00:14.2: reg 0x10: [mem 0xfe5f4000-0xfe5f7fff 64bit]
[    0.072850] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.072915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.073025] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.073118] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.073130] pci 0000:00:14.5: reg 0x10: [mem 0xfe5fc000-0xfe5fcfff]
[    0.073233] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.073246] pci 0000:00:16.0: reg 0x10: [mem 0xfe5f3000-0xfe5f3fff]
[    0.073348] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.073363] pci 0000:00:16.2: reg 0x10: [mem 0xfe5ff000-0xfe5ff0ff]
[    0.073418] pci 0000:00:16.2: supports D1 D2
[    0.073418] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.073488] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.073551] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.073610] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.073670] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.073731] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.073829] pci 0000:05:00.0: [1002:665f] type 00 class 0x030000
[    0.073851] pci 0000:05:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.073860] pci 0000:05:00.0: reg 0x18: [mem 0xcf800000-0xcfffffff 64bit pref]
[    0.073866] pci 0000:05:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.073872] pci 0000:05:00.0: reg 0x24: [mem 0xfe980000-0xfe9bffff]
[    0.073877] pci 0000:05:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.073882] pci 0000:05:00.0: enabling Extended Tags
[    0.073929] pci 0000:05:00.0: supports D1 D2
[    0.073930] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.073991] pci 0000:05:00.1: [1002:aac0] type 00 class 0x040300
[    0.074009] pci 0000:05:00.1: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.074038] pci 0000:05:00.1: enabling Extended Tags
[    0.074075] pci 0000:05:00.1: supports D1 D2
[    0.088038] pci 0000:00:02.0: PCI bridge to [bus 05]
[    0.088048] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.088054] pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.088061] pci 0000:00:02.0:   bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.088284] pci 0000:01:00.0: [1b4b:9120] type 00 class 0x010601
[    0.088297] pci 0000:01:00.0: reg 0x10: [io  0xc080-0xc087]
[    0.088302] pci 0000:01:00.0: reg 0x14: [io  0xc000-0xc003]
[    0.088307] pci 0000:01:00.0: reg 0x18: [io  0xbc00-0xbc07]
[    0.088312] pci 0000:01:00.0: reg 0x1c: [io  0xb880-0xb883]
[    0.088318] pci 0000:01:00.0: reg 0x20: [io  0xb800-0xb80f]
[    0.088323] pci 0000:01:00.0: reg 0x24: [mem 0xfe6ff000-0xfe6ff7ff]
[    0.088329] pci 0000:01:00.0: reg 0x30: [mem 0xfe6d0000-0xfe6dffff pref]
[    0.088338] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
[    0.088361] pci 0000:01:00.0: PME# supported from D3hot
[    0.100043] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.100052] pci 0000:00:04.0:   bridge window [io  0xb000-0xcfff]
[    0.100057] pci 0000:00:04.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.100171] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[    0.100203] pci 0000:02:00.0: reg 0x10: [mem 0xfe7fe000-0xfe7fffff 64bit]
[    0.100310] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.112046] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.112056] pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.112177] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[    0.112209] pci 0000:03:00.0: reg 0x10: [mem 0xfe8fe000-0xfe8fffff 64bit]
[    0.112312] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.124046] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.124056] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.124175] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.124204] pci 0000:04:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.124231] pci 0000:04:00.0: reg 0x18: [mem 0xcf7ff000-0xcf7fffff 64bit pref]
[    0.124250] pci 0000:04:00.0: reg 0x20: [mem 0xcf7f8000-0xcf7fbfff 64bit pref]
[    0.124323] pci 0000:04:00.0: supports D1 D2
[    0.124324] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136047] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    0.136055] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.136063] pci 0000:00:0a.0:   bridge window [mem 0xcf700000-0xcf7fffff 64bit pref]
[    0.136201] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[    0.136213] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.136217] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.136222] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.136226] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.136230] pci 0000:00:14.4:   bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
[    0.136234] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.136983] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
[    0.137051] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
[    0.137122] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
[    0.137193] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
[    0.137251] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
[    0.137296] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
[    0.137342] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
[    0.137387] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
[    0.137693] SCSI subsystem initialized
[    0.137729] libata version 3.00 loaded.
[    0.137729] pci 0000:05:00.0: vgaarb: setting as boot VGA device
[    0.137729] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.137729] pci 0000:05:00.0: vgaarb: bridge control possible
[    0.137729] vgaarb: loaded
[    0.137729] ACPI: bus type USB registered
[    0.137729] usbcore: registered new interface driver usbfs
[    0.137729] usbcore: registered new interface driver hub
[    0.137729] usbcore: registered new device driver usb
[    0.137729] EDAC MC: Ver: 3.0.0
[    0.137729] PCI: Using ACPI for IRQ routing
[    0.140083] PCI: pci_cache_line_size set to 64 bytes
[    0.140128] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    0.140129] e820: reserve RAM buffer [mem 0xc7ea0000-0xc7ffffff]
[    0.144005] NetLabel: Initializing
[    0.144005] NetLabel:  domain hash size = 128
[    0.144005] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144005] NetLabel:  unlabeled traffic allowed by default
[    0.144049] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.144051] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.146146] clocksource: Switched to clocksource hpet
[    0.154385] VFS: Disk quotas dquot_6.6.0
[    0.154400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.154515] AppArmor: AppArmor Filesystem Enabled
[    0.154537] pnp: PnP ACPI init
[    0.154684] system 00:00: [mem 0xf6000000-0xf6003fff] could not be reserved
[    0.154688] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154769] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.155165] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.155166] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.155169] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155357] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.155358] system 00:03: [io  0x040b] has been reserved
[    0.155359] system 00:03: [io  0x04d6] has been reserved
[    0.155360] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.155361] system 00:03: [io  0x0c14] has been reserved
[    0.155362] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.155363] system 00:03: [io  0x0c52] has been reserved
[    0.155364] system 00:03: [io  0x0c6c] has been reserved
[    0.155365] system 00:03: [io  0x0c6f] has been reserved
[    0.155366] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.155367] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.155368] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.155369] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.155370] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.155371] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.155372] system 00:03: [io  0x0b00-0x0b1f] has been reserved
[    0.155373] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.155374] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.155375] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.155376] system 00:03: [io  0xfe00-0xfefe] has been reserved
[    0.155377] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.155378] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.155382] system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.155384] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155424] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.155632] pnp 00:05: [dma 0 disabled]
[    0.155675] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.155755] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.155758] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155808] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.155810] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155944] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.155945] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.155946] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.155947] system 00:08: [mem 0x00100000-0xc7efffff] could not be reserved
[    0.155948] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.155951] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.156056] pnp: PnP ACPI: found 9 devices
[    0.162450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.162477] pci 0000:00:02.0: PCI bridge to [bus 05]
[    0.162478] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.162481] pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.162482] pci 0000:00:02.0:   bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.162484] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.162485] pci 0000:00:04.0:   bridge window [io  0xb000-0xcfff]
[    0.162487] pci 0000:00:04.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.162490] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.162491] pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.162494] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.162496] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.162498] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    0.162500] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.162502] pci 0000:00:0a.0:   bridge window [mem 0xcf700000-0xcf7fffff 64bit pref]
[    0.162504] pci 0000:00:14.4: PCI bridge to [bus 06]
[    0.162513] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.162514] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.162515] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.162516] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.162517] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff window]
[    0.162517] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.162518] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.162519] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.162520] pci_bus 0000:05: resource 2 [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.162521] pci_bus 0000:01: resource 0 [io  0xb000-0xcfff]
[    0.162522] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.162523] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.162524] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.162526] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.162526] pci_bus 0000:04: resource 2 [mem 0xcf700000-0xcf7fffff 64bit pref]
[    0.162528] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.162528] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.162529] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.162530] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.162531] pci_bus 0000:06: resource 8 [mem 0xc7f00000-0xdfffffff window]
[    0.162532] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.162591] NET: Registered protocol family 2
[    0.162799] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.163068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.163297] TCP: Hash tables configured (established 131072 bind 65536)
[    0.163352] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.163427] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.163531] NET: Registered protocol family 1
[    0.548511] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.548751] PCI: CLS 64 bytes, default 64
[    0.548787] Unpacking initramfs...
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

lazarus wrote: ⤴Sat Aug 18, 2018 1:33 am Hmmm... dmesg generates output longer than the forum will accept. You prefer it trimmed or in multi-part?
It should be ok if you paste it between code markers. If need be, split it up rather than trim it.

http://www.asrock.com/mb/AMD/890FX%20Deluxe4/#BIOS

To start with, you should update your BIOS, reboot and see if the message reappears. If it does, I'll need the dmesg output.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

dmesg Part2

Code: Select all

[    1.188282] Freeing initrd memory: 54600K
[    1.237030] iommu: Adding device 0000:00:00.0 to group 0
[    1.237040] iommu: Using direct mapping for device 0000:00:00.0
[    1.237079] iommu: Adding device 0000:00:02.0 to group 1
[    1.237086] iommu: Using direct mapping for device 0000:00:02.0
[    1.237118] iommu: Adding device 0000:00:04.0 to group 2
[    1.237124] iommu: Using direct mapping for device 0000:00:04.0
[    1.237154] iommu: Adding device 0000:00:05.0 to group 3
[    1.237160] iommu: Using direct mapping for device 0000:00:05.0
[    1.237193] iommu: Adding device 0000:00:06.0 to group 4
[    1.237199] iommu: Using direct mapping for device 0000:00:06.0
[    1.237230] iommu: Adding device 0000:00:0a.0 to group 5
[    1.237236] iommu: Using direct mapping for device 0000:00:0a.0
[    1.237266] iommu: Adding device 0000:00:11.0 to group 6
[    1.237272] iommu: Using direct mapping for device 0000:00:11.0
[    1.237307] iommu: Adding device 0000:00:12.0 to group 7
[    1.237313] iommu: Using direct mapping for device 0000:00:12.0
[    1.237321] iommu: Adding device 0000:00:12.2 to group 7
[    1.237358] iommu: Adding device 0000:00:13.0 to group 8
[    1.237364] iommu: Using direct mapping for device 0000:00:13.0
[    1.237373] iommu: Adding device 0000:00:13.2 to group 8
[    1.237404] iommu: Adding device 0000:00:14.0 to group 9
[    1.237410] iommu: Using direct mapping for device 0000:00:14.0
[    1.237440] iommu: Adding device 0000:00:14.2 to group 10
[    1.237446] iommu: Using direct mapping for device 0000:00:14.2
[    1.237476] iommu: Adding device 0000:00:14.3 to group 11
[    1.237482] iommu: Using direct mapping for device 0000:00:14.3
[    1.237513] iommu: Adding device 0000:00:14.4 to group 12
[    1.237520] iommu: Using direct mapping for device 0000:00:14.4
[    1.237549] iommu: Adding device 0000:00:14.5 to group 13
[    1.237555] iommu: Using direct mapping for device 0000:00:14.5
[    1.237591] iommu: Adding device 0000:00:16.0 to group 14
[    1.237597] iommu: Using direct mapping for device 0000:00:16.0
[    1.237606] iommu: Adding device 0000:00:16.2 to group 14
[    1.237665] iommu: Adding device 0000:05:00.0 to group 15
[    1.237675] iommu: Using direct mapping for device 0000:05:00.0
[    1.237695] iommu: Adding device 0000:05:00.1 to group 15
[    1.237727] iommu: Adding device 0000:01:00.0 to group 16
[    1.237734] iommu: Using direct mapping for device 0000:01:00.0
[    1.237767] iommu: Adding device 0000:02:00.0 to group 17
[    1.237773] iommu: Using direct mapping for device 0000:02:00.0
[    1.237806] iommu: Adding device 0000:03:00.0 to group 18
[    1.237813] iommu: Using direct mapping for device 0000:03:00.0
[    1.237848] iommu: Adding device 0000:04:00.0 to group 19
[    1.237854] iommu: Using direct mapping for device 0000:04:00.0
[    1.286092] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.286234] AMD-Vi: IO/TLB flush on unmap enabled
[    1.286236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.286238] software IO TLB [mem 0xc3ea0000-0xc7ea0000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.286276] LVT offset 1 assigned for vector 0x400
[    1.286279] IBS: LVT offset 1 assigned
[    1.286493] perf: AMD IBS detected (0x0000001f)
[    1.286529] Scanning for low memory corruption every 60 seconds
[    1.287106] Initialise system trusted keyrings
[    1.287114] Key type blacklist registered
[    1.287199] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.288150] zbud: loaded
[    1.288577] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.288839] fuse init (API version 7.26)
[    1.290648] Key type asymmetric registered
[    1.290649] Asymmetric key parser 'x509' registered
[    1.290669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.290755] io scheduler noop registered
[    1.290755] io scheduler deadline registered
[    1.290791] io scheduler cfq registered (default)
[    1.291480] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    1.291481] vesafb: scrolling: redraw
[    1.291482] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.291492] vesafb: framebuffer at 0xd0000000, mapped to 0x        (ptrval), using 4224k, total 4224k
[    1.291590] Console: switching to colour frame buffer device 170x48
[    1.291605] fb0: VESA VGA frame buffer device
[    1.291673] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.291687] ACPI: Power Button [PWRB]
[    1.291714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.291765] ACPI: Power Button [PWRF]
[    1.291788] ACPI: ACPI: processor limited to max C-state 1
[    1.292265] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.312698] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.314316] Linux agpgart interface v0.103
[    1.316435] loop: module loaded
[    1.316583] libphy: Fixed MDIO Bus: probed
[    1.316584] tun: Universal TUN/TAP device driver, 1.6
[    1.316630] PPP generic driver version 2.4.2
[    1.316664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.316667] ehci-pci: EHCI PCI platform driver
[    1.316808] QUIRK: Enable AMD PLL fix
[    1.316828] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.316836] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.316842] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.316850] ehci-pci 0000:00:12.2: debug port 1
[    1.316885] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe5ff800
[    1.336121] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.336249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.336254] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.336258] usb usb1: Product: EHCI Host Controller
[    1.336262] usb usb1: Manufacturer: Linux 4.15.0-32-generic ehci_hcd
[    1.336265] usb usb1: SerialNumber: 0000:00:12.2
[    1.336431] hub 1-0:1.0: USB hub found
[    1.336437] hub 1-0:1.0: 5 ports detected
[    1.336739] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.336745] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.336747] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.336754] ehci-pci 0000:00:13.2: debug port 1
[    1.336777] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe5ff400
[    1.352121] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.352255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.352260] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.352263] usb usb2: Product: EHCI Host Controller
[    1.352267] usb usb2: Manufacturer: Linux 4.15.0-32-generic ehci_hcd
[    1.352270] usb usb2: SerialNumber: 0000:00:13.2
[    1.352443] hub 2-0:1.0: USB hub found
[    1.352448] hub 2-0:1.0: 5 ports detected
[    1.352747] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.352752] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.352754] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.352761] ehci-pci 0000:00:16.2: debug port 1
[    1.352783] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe5ff000
[    1.368131] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.368222] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.368223] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.368224] usb usb3: Product: EHCI Host Controller
[    1.368225] usb usb3: Manufacturer: Linux 4.15.0-32-generic ehci_hcd
[    1.368225] usb usb3: SerialNumber: 0000:00:16.2
[    1.368310] hub 3-0:1.0: USB hub found
[    1.368314] hub 3-0:1.0: 4 ports detected
[    1.368429] ehci-platform: EHCI generic platform driver
[    1.368437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.368440] ohci-pci: OHCI PCI platform driver
[    1.368549] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.368552] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.368571] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe5fe000
[    1.432138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.432139] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.432140] usb usb4: Product: OHCI PCI host controller
[    1.432141] usb usb4: Manufacturer: Linux 4.15.0-32-generic ohci_hcd
[    1.432142] usb usb4: SerialNumber: 0000:00:12.0
[    1.432241] hub 4-0:1.0: USB hub found
[    1.432247] hub 4-0:1.0: 5 ports detected
[    1.432445] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.432449] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.432464] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe5fd000
[    1.496137] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.496139] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.496140] usb usb5: Product: OHCI PCI host controller
[    1.496140] usb usb5: Manufacturer: Linux 4.15.0-32-generic ohci_hcd
[    1.496141] usb usb5: SerialNumber: 0000:00:13.0
[    1.496242] hub 5-0:1.0: USB hub found
[    1.496247] hub 5-0:1.0: 5 ports detected
[    1.496452] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.496455] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.496470] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe5fc000
[    1.560134] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.560136] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.560136] usb usb6: Product: OHCI PCI host controller
[    1.560137] usb usb6: Manufacturer: Linux 4.15.0-32-generic ohci_hcd
[    1.560138] usb usb6: SerialNumber: 0000:00:14.5
[    1.560237] hub 6-0:1.0: USB hub found
[    1.560243] hub 6-0:1.0: 2 ports detected
[    1.560418] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.560421] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.560435] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe5f3000
[    1.624135] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.624136] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.624137] usb usb7: Product: OHCI PCI host controller
[    1.624138] usb usb7: Manufacturer: Linux 4.15.0-32-generic ohci_hcd
[    1.624139] usb usb7: SerialNumber: 0000:00:16.0
[    1.624237] hub 7-0:1.0: USB hub found
[    1.624242] hub 7-0:1.0: 4 ports detected
[    1.624342] ohci-platform: OHCI generic platform driver
[    1.624348] uhci_hcd: USB Universal Host Controller Interface driver
[    1.624443] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.624447] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    1.624556] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    1.624725] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.624726] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.624727] usb usb8: Product: xHCI Host Controller
[    1.624727] usb usb8: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[    1.624728] usb usb8: SerialNumber: 0000:02:00.0
[    1.624818] hub 8-0:1.0: USB hub found
[    1.624824] hub 8-0:1.0: 2 ports detected
[    1.624885] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.624887] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    1.627923] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.627936] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    1.627937] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.627938] usb usb9: Product: xHCI Host Controller
[    1.627939] usb usb9: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[    1.627940] usb usb9: SerialNumber: 0000:02:00.0
[    1.628041] hub 9-0:1.0: USB hub found
[    1.628065] hub 9-0:1.0: 2 ports detected
[    1.628297] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.628301] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
[    1.628413] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    1.628590] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.628591] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.628592] usb usb10: Product: xHCI Host Controller
[    1.628592] usb usb10: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[    1.628593] usb usb10: SerialNumber: 0000:03:00.0
[    1.628680] hub 10-0:1.0: USB hub found
[    1.628685] hub 10-0:1.0: 2 ports detected
[    1.628747] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.628749] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11
[    1.631773] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.631786] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.631787] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.631787] usb usb11: Product: xHCI Host Controller
[    1.631788] usb usb11: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[    1.631789] usb usb11: SerialNumber: 0000:03:00.0
[    1.631874] hub 11-0:1.0: USB hub found
[    1.631882] hub 11-0:1.0: 2 ports detected
[    1.632029] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.632030] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.632687] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.632795] mousedev: PS/2 mouse device common for all mice
[    1.632915] rtc_cmos 00:01: RTC can wake from S4
[    1.632996] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.633013] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.633018] i2c /dev entries driver
[    1.633057] device-mapper: uevent: version 1.0.3
[    1.633116] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.633324] ledtrig-cpu: registered to indicate activity on CPUs
[    1.633720] NET: Registered protocol family 10
[    1.637885] Segment Routing with IPv6
[    1.637918] NET: Registered protocol family 17
[    1.637982] Key type dns_resolver registered
[    1.638351] RAS: Correctable Errors collector initialized.
[    1.638383] microcode: microcode updated early to new patch_level=0x010000dc
[    1.638406] microcode: CPU0: patch_level=0x010000dc
[    1.638429] microcode: CPU1: patch_level=0x010000dc
[    1.638440] microcode: CPU2: patch_level=0x010000dc
[    1.638464] microcode: CPU3: patch_level=0x010000dc
[    1.638489] microcode: CPU4: patch_level=0x010000dc
[    1.638500] microcode: CPU5: patch_level=0x010000dc
[    1.638533] microcode: Microcode Update Driver: v2.2.
[    1.638540] sched_clock: Marking stable (1638529122, 0)->(1724900902, -86371780)
[    1.638831] registered taskstats version 1
[    1.638840] Loading compiled-in X.509 certificates
[    1.641235] Loaded X.509 cert 'Build time autogenerated kernel key: 0a084e614671d08d03b088161eeecdabc544c9be'
[    1.641254] zswap: loaded using pool lzo/zbud
[    1.644879] Key type big_key registered
[    1.644885] Key type trusted registered
[    1.646462] Key type encrypted registered
[    1.646464] AppArmor: AppArmor sha1 policy hashing enabled
[    1.646467] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.646495] evm: HMAC attrs: 0x1
[    1.646731]   Magic number: 14:467:816
[    1.646889] rtc_cmos 00:01: setting system clock to 2018-08-18 03:50:28 UTC (1534564228)
[    1.647112] acpi_cpufreq: overriding BIOS provided _PSD data
[    1.647299] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.647299] EDD information not available.
[    1.649934] Freeing unused kernel memory: 2408K
[    1.672154] Write protecting the kernel read-only data: 20480k
[    1.673014] Freeing unused kernel memory: 2008K
[    1.677344] Freeing unused kernel memory: 1892K
[    1.683801] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.693842] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.693901] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.693909] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.693920] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.694330] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.694346] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.701182] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.701203] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.701207] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.701425] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.738907] ahci 0000:00:11.0: version 3.0
[    1.739215] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.739217] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.740568] scsi host0: ahci
[    1.740737] scsi host1: ahci
[    1.741624] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.741633] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.742000] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0x        (ptrval), 00:25:22:86:42:fd, XID 0c200000 IRQ 47
[    1.742001] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.742013] scsi host2: ahci
[    1.744241] scsi host3: ahci
[    1.752031] scsi host4: ahci
[    1.760024] scsi host5: ahci
[    1.760075] ata1: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 45
[    1.760077] ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 45
[    1.760079] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 45
[    1.760080] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 45
[    1.760082] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5fff00 irq 45
[    1.760084] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5fff80 irq 45
[    1.760320] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.760323] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.763150] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    1.765307] scsi host6: ahci
[    1.767240] scsi host7: ahci
[    1.767294] ata7: SATA max UDMA/133 abar m2048@0xfe6ff000 port 0xfe6ff100 irq 49
[    1.767296] ata8: SATA max UDMA/133 abar m2048@0xfe6ff000 port 0xfe6ff180 irq 49
[    1.782818] [drm] radeon kernel modesetting enabled.
[    1.782937] checking generic (d0000000 420000) vs hw (d0000000 10000000)
[    1.782938] fb: switching to radeondrmfb from VESA VGA
[    1.782962] Console: switching to colour dummy device 80x25
[    1.783259] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665F 0x1462:0x8098 0x81).
[    1.783272] [drm] doorbell mmio base: 0xCF800000
[    1.783273] [drm] doorbell mmio size: 8388608
[    1.783306] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[    1.783309] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[    1.784116] ATOM BIOS: 113
[    1.784180] radeon 0000:05:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.784181] radeon 0000:05:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    1.784184] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.784184] [drm] RAM width 128bits DDR
[    1.784264] [TTM] Zone  kernel: Available graphics memory: 8179372 kiB
[    1.784264] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.784265] [TTM] Initializing pool allocator
[    1.784268] [TTM] Initializing DMA pool allocator
[    1.784286] [drm] radeon: 2048M of VRAM memory ready
[    1.784287] [drm] radeon: 2048M of GTT memory ready.
[    1.784292] [drm] Loading bonaire Microcode
[    1.784459] [drm] Internal thermal controller with fan control
[    1.784498] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[    1.791815] [drm] radeon: dpm initialized
[    1.791909] [drm] Found UVD firmware Version: 1.55 Family ID: 9
[    1.792965] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[    1.792971] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    1.794928] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[    1.794930] [drm] PCIE gen 2 link speeds already enabled
[    1.808832] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[    1.808950] radeon 0000:05:00.0: WB enabled
[    1.808959] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x        (ptrval)
[    1.808961] radeon 0000:05:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x        (ptrval)
[    1.808962] radeon 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x        (ptrval)
[    1.808963] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x        (ptrval)
[    1.808964] radeon 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x        (ptrval)
[    1.809348] radeon 0000:05:00.0: fence driver on ring 5 use gpu addr 0x00000000000782b0 and cpu addr 0x        (ptrval)
[    1.809496] radeon 0000:05:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0x        (ptrval)
[    1.809497] radeon 0000:05:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0x        (ptrval)
[    1.809500] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.809500] [drm] Driver supports precise vblank timestamp query.
[    1.809539] radeon 0000:05:00.0: radeon: using MSI.
[    1.809563] [drm] radeon: irq initialized.
[    1.812090] [drm] ring test on 0 succeeded in 3 usecs
[    1.812172] [drm] ring test on 1 succeeded in 3 usecs
[    1.812187] [drm] ring test on 2 succeeded in 3 usecs
[    1.812333] [drm] ring test on 3 succeeded in 5 usecs
[    1.812339] [drm] ring test on 4 succeeded in 5 usecs
[    1.858011] [drm] ring test on 5 succeeded in 2 usecs
[    1.877881] [drm] UVD initialized successfully.
[    1.987068] [drm] ring test on 6 succeeded in 19 usecs
[    1.987079] [drm] ring test on 7 succeeded in 4 usecs
[    1.987080] [drm] VCE initialized successfully.
[    1.988950] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.988983] [drm] ib test on ring 1 succeeded in 0 usecs
[    1.989013] [drm] ib test on ring 2 succeeded in 0 usecs
[    1.989067] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.989117] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.020129] usb 5-2: new full-speed USB device number 2 using ohci-pci
[    2.083814] ata8: SATA link down (SStatus 0 SControl 330)
[    2.083857] ata7: SATA link down (SStatus 0 SControl 330)
[    2.116074] random: fast init done
[    2.223226] usb 5-2: New USB device found, idVendor=04d9, idProduct=a153
[    2.223233] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.223238] usb 5-2: Product: COUGAR Minos X3
[    2.223241] usb 5-2: Manufacturer: E-Signal
[    2.229876] hidraw: raw HID events driver (C) Jiri Kosina
[    2.236150] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.239198] ata1.00: ATAPI: HL-DT-ST BD-RE  BH16NS40, 1.03, max UDMA/100
[    2.240129] ata1.00: configured for UDMA/100
[    2.240160] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.240193] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.240229] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.240264] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.240706] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    2.240707] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.241280] ata6.00: configured for UDMA/133
[    2.241478] ata2.00: ATA-9: ST3000DM001-1CH166, CC29, max UDMA/133
[    2.241480] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.242384] ata2.00: configured for UDMA/133
[    2.244143] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.246340] usbcore: registered new interface driver usbhid
[    2.246340] usbhid: USB HID core driver
[    2.247829] input: E-Signal COUGAR Minos X3 as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:04D9:A153.0001/input/input3
[    2.247949] hid-generic 0003:04D9:A153.0001: input,hidraw0: USB HID v1.10 Mouse [E-Signal COUGAR Minos X3] on usb-0000:00:13.0-2/input0
[    2.248225] input: E-Signal COUGAR Minos X3 as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:04D9:A153.0002/input/input4
[    2.251733] ata4.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[    2.251738] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.252882] scsi 0:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH16NS40  1.03 PQ: 0 ANSI: 5
[    2.253385] ata3.00: ATA-8: WDC WD10EACS-22D6B0, 01.01A01, max UDMA/133
[    2.253390] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.254319] ata3.00: configured for UDMA/133
[    2.255225] ata4.00: configured for UDMA/133
[    2.258039] ata5.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[    2.258043] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.260143] ata5.00: configured for UDMA/133
[    2.304139] tsc: Refined TSC clocksource calibration: 3314.553 MHz
[    2.304165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fc6ffc156c, max_idle_ns: 440795225045 ns
[    2.308435] hid-generic 0003:04D9:A153.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [E-Signal COUGAR Minos X3] on usb-0000:00:13.0-2/input1
[    2.308574] hid-generic 0003:04D9:A153.0003: hiddev1,hidraw2: USB HID v1.10 Device [E-Signal COUGAR Minos X3] on usb-0000:00:13.0-2/input2
[    2.319220] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.319225] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.319435] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.319568] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.319767] scsi 1:0:0:0: Direct-Access     ATA      ST3000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    2.319982] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.320040] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    2.320041] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.320055] sd 1:0:0:0: [sda] Write Protect is off
[    2.320057] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.320088] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.320159] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EACS-22D 1A01 PQ: 0 ANSI: 5
[    2.320363] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.320367] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.320377] sd 2:0:0:0: [sdb] Write Protect is off
[    2.320379] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.320392] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.320512] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[    2.320675] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    2.320691] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.320701] sd 3:0:0:0: [sdc] Write Protect is off
[    2.320703] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.320723] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.320819] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[    2.321001] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    2.321010] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.321019] sd 4:0:0:0: [sdd] Write Protect is off
[    2.321020] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.321130] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    2.321149] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.321354] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.321355] sd 5:0:0:0: [sde] 4096-byte physical blocks
[    2.321363] sd 5:0:0:0: [sde] Write Protect is off
[    2.321365] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    2.321366] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    2.321382] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.364859]  sdb: sdb1 sdb2
[    2.365447] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.372683]  sdd: sdd1 sdd2
[    2.372788]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    2.373188] sd 4:0:0:0: [sdd] Attached SCSI disk
[    2.373528] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.378363]  sdc: sdc1 sdc2
[    2.378859] sd 3:0:0:0: [sdc] Attached SCSI disk
[    2.379336]  sde: sde1 sde2
[    2.379795] sd 5:0:0:0: [sde] Attached SCSI disk
[    2.528160] [drm] ib test on ring 5 succeeded
[    2.549089] [drm] ib test on ring 6 succeeded
[    2.550025] [drm] ib test on ring 7 succeeded
[    2.550841] [drm] Radeon Display Connectors
[    2.550842] [drm] Connector 0:
[    2.550843] [drm]   DP-1
[    2.550843] [drm]   HPD2
[    2.550844] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    2.550844] [drm]   Encoders:
[    2.550845] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.550845] [drm] Connector 1:
[    2.550845] [drm]   HDMI-A-1
[    2.550846] [drm]   HPD1
[    2.550847] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    2.550847] [drm]   Encoders:
[    2.550847] [drm]     DFP2: INTERNAL_UNIPHY1
[    2.550848] [drm] Connector 2:
[    2.550848] [drm]   DVI-I-1
[    2.550848] [drm]   HPD6
[    2.550849] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[    2.550849] [drm]   Encoders:
[    2.550850] [drm]     DFP3: INTERNAL_UNIPHY
[    2.550850] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.658218] [drm] fb mappable at 0xD0721000
[    2.658219] [drm] vram apper at 0xD0000000
[    2.658219] [drm] size 4325376
[    2.658220] [drm] fb depth is 24
[    2.658220] [drm]    pitch is 5632
[    2.658292] fbcon: radeondrmfb (fb0) is primary device
[    2.658342] Console: switching to colour frame buffer device 170x48
[    2.658359] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[    2.678755] [drm] Initialized radeon 2.50.0 20080528 for 0000:05:00.0 on minor 0
[    2.707949] [drm] amdgpu kernel modesetting enabled.
[    2.737715] random: crng init done
[    2.784062] raid6: sse2x1   gen()  4431 MB/s
[    2.828112] usb 5-3: new full-speed USB device number 3 using ohci-pci
[    2.832021] raid6: sse2x1   xor()  4954 MB/s
[    2.880046] raid6: sse2x2   gen()  7582 MB/s
[    2.928013] raid6: sse2x2   xor()  8031 MB/s
[    2.976027] raid6: sse2x4   gen()  8550 MB/s
[    3.023170] usb 5-3: New USB device found, idVendor=0f39, idProduct=1083
[    3.023172] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.023173] usb 5-3: Product: DK2108
[    3.023174] usb 5-3: Manufacturer: Heng Yu Technology
[    3.024031] raid6: sse2x4   xor()  3798 MB/s
[    3.024041] raid6: using algorithm sse2x4 gen() 8550 MB/s
[    3.024041] raid6: .... xor() 3798 MB/s, rmw enabled
[    3.024047] raid6: using intx1 recovery algorithm
[    3.025307] xor: measuring software checksum speed
[    3.031390] input: Heng Yu Technology DK2108 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:0F39:1083.0004/input/input5
[    3.064013]    prefetch64-sse: 14076.000 MB/sec
[    3.088286] hid-generic 0003:0F39:1083.0004: input,hidraw3: USB HID v1.10 Keyboard [Heng Yu Technology DK2108] on usb-0000:00:13.0-3/input0
[    3.093367] input: Heng Yu Technology DK2108 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/0003:0F39:1083.0005/input/input6
[    3.104013]    generic_sse: 13511.000 MB/sec
[    3.104014] xor: using function: prefetch64-sse (14076.000 MB/sec)
[    3.105146] async_tx: api initialized (async)
[    3.112631] md/raid:md1: device sdc2 operational as raid disk 1
[    3.112633] md/raid:md1: device sdb2 operational as raid disk 0
[    3.112633] md/raid:md1: device sde2 operational as raid disk 3
[    3.112634] md/raid:md1: device sdd2 operational as raid disk 2
[    3.112663] md/raid:md0: device sdc1 operational as raid disk 1
[    3.112664] md/raid:md0: device sdb1 operational as raid disk 0
[    3.112665] md/raid:md0: device sdd1 operational as raid disk 2
[    3.112666] md/raid:md0: device sde1 operational as raid disk 3
[    3.113098] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[    3.113148] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
[    3.152378] hid-generic 0003:0F39:1083.0005: input,hidraw4: USB HID v1.10 Device [Heng Yu Technology DK2108] on usb-0000:00:13.0-3/input1
[    3.163250] md0: detected capacity change from 0 to 2250057449472
[    3.253508] md1: detected capacity change from 0 to 749746520064
[    3.328349] clocksource: Switched to clocksource tsc
[    4.040858] [drm:ci_dpm_set_power_state [radeon]] *ERROR* ci_upload_dpm_level_enable_mask failed
[    4.165713] Btrfs loaded, crc32c=crc32c-generic
[    4.677806] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.590956] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.608538] systemd[1]: Detected architecture x86-64.
[    5.609218] systemd[1]: Set hostname to <Beelzebub>.
[    6.733375] systemd[1]: Reached target Remote File Systems (Pre).
[    6.733450] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.733476] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.733505] systemd[1]: Listening on Journal Socket.
[    6.733614] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.733643] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.733664] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.344478] lp: driver loaded but no devices found
[    7.416815] ppdev: user-space parallel port driver
[    7.646659] w83627ehf: Found NCT6775F chip at 0x290
[    7.646954] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   12.682185] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   12.699492] systemd-journald[426]: Received request to flush runtime journal from PID 1
[   12.796125] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.829417] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247)
[   12.829424] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.847086] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[   12.847088] snd_hda_intel 0000:05:00.1: Force to non-snoop mode
[   12.861563] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input7
[   12.861628] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input8
[   12.861680] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input9
[   12.861731] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input10
[   12.861735] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   12.861737] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.861738] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.861739] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.861740] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   12.861741] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.861742] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   12.861743] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.861771] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input11
[   12.861817] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input12
[   12.876910] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[   12.876982] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[   12.877042] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[   12.877095] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[   12.877140] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[   12.877182] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[   12.914515] kvm: Nested Virtualization enabled
[   12.914517] kvm: Nested Paging enabled
[   12.916168] MCE: In-kernel MCE decoding enabled.
[   12.917547] EDAC amd64: Node 0: DRAM ECC disabled.
[   12.917549] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   12.972567] EDAC amd64: Node 0: DRAM ECC disabled.
[   12.972569] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   14.031096] Adding 47999996k swap on /dev/sda2.  Priority:-2 extents:1 across:47999996k FS
[   14.420093] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[   14.747348] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   14.868304] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.055131] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.697562] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   16.932355] audit: type=1400 audit(1534564243.781:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1039 comm="apparmor_parser"
[   16.932431] audit: type=1400 audit(1534564243.781:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/clamd" pid=1040 comm="apparmor_parser"
[   16.932622] audit: type=1400 audit(1534564243.781:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1041 comm="apparmor_parser"
[   16.933149] audit: type=1400 audit(1534564243.781:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1037 comm="apparmor_parser"
[   16.933151] audit: type=1400 audit(1534564243.781:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1037 comm="apparmor_parser"
[   16.933153] audit: type=1400 audit(1534564243.781:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1037 comm="apparmor_parser"
[   16.933154] audit: type=1400 audit(1534564243.781:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1037 comm="apparmor_parser"
[   16.933299] audit: type=1400 audit(1534564243.781:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1043 comm="apparmor_parser"
[   16.933389] audit: type=1400 audit(1534564243.781:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1036 comm="apparmor_parser"
[   16.933392] audit: type=1400 audit(1534564243.781:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1036 comm="apparmor_parser"
[   16.972800] new mount options do not match the existing superblock, will be ignored
[   17.819046] vboxdrv: loading out-of-tree module taints kernel.
[   17.819295] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   17.822487] vboxdrv: Found 6 processor cores
[   17.840295] vboxdrv: TSC mode is Invariant, tentative frequency 3314538459 Hz
[   17.840296] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
[   18.043740] VBoxNetFlt: Successfully started.
[   18.045074] VBoxNetAdp: Successfully started.
[   18.046325] VBoxPciLinuxInit
[   18.048328] vboxpci: IOMMU found
[   22.529416] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   22.779782] r8169 0000:04:00.0 enp4s0: link down
[   22.779806] r8169 0000:04:00.0 enp4s0: link down
[   22.779870] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   23.940339] radeon_dp_aux_transfer_native: 116 callbacks suppressed
[   24.962415] r8169 0000:04:00.0 enp4s0: link up
[   24.962434] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   40.772662] radeon_dp_aux_transfer_native: 74 callbacks suppressed
There are multiple warns I'm slowly working through, but apart from the Radeon Fail [ 4.040858] [drm:ci_dpm_set_power_state [radeon]] *ERROR* ci_upload_dpm_level_enable_mask failed I've seen naught that would be the cause of the fsck.

Of course, I'm as capable of missing the blatantly obvious as anyone.... if not more so. :roll:
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

lazarus wrote: ⤴Sat Aug 18, 2018 1:39 am /nvm. Multipart it is. ;)
Nothing conspicuous in the first part. Do you know what drive is affected?

Also, please post the output of lsblk.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

catweazel wrote: ⤴Sat Aug 18, 2018 1:41 am To start with, you should update your BIOS, reboot and see if the message reappears. If it does, I'll need the dmesg output.
Ooer! Touché A hit, a palpable hit!

In my defence I had upgraded it back when still running Win but it broke the RAID functionality of the mobo so I reverted. In my head it was still upgraded... funny things heads. :oops:

As I'm no longer using the pseudo-HW RAID, I'll do just that now. If I can find something bootable to format as FAT32 for the InstaFlash. :?
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

lazarus wrote: ⤴Sat Aug 18, 2018 1:57 am
catweazel wrote: ⤴Sat Aug 18, 2018 1:41 am To start with, you should update your BIOS, reboot and see if the message reappears. If it does, I'll need the dmesg output.
Ooer! Touché A hit, a palpable hit!

In my defence I had upgraded it back when still running Win but it broke the RAID functionality of the mobo so I reverted. In my head it was still upgraded... funny things heads. :oops:

As I'm no longer using the pseudo-HW RAID, I'll do just that now. If I can find something bootable to format as FAT32 for the InstaFlash. :?
Is your swap partition actually 48GB?
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

Yes. Yes it is. I've always preferred 2xRAM for size and in this case I have 3TB to play with so went liberal

in the near future /sda will be replaced by a 500GB SSD, so /swap will shrink and /sda5 and /sda6 will disappear into the aether. They're handy for now, though.

Code: Select all

lazarus@Beelzebub ~ $ lsblk
NAME    MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sdd       8:48   0 931.5G  0 disk  
├─sdd2    8:50   0 232.9G  0 part  
│ └─md1   9:1    0 698.3G  0 raid5 /mnt/RAID_Store
└─sdd1    8:49   0 698.7G  0 part  
  └─md0   9:0    0     2T  0 raid5 /home
sdb       8:16   0 931.5G  0 disk  
├─sdb2    8:18   0 232.9G  0 part  
│ └─md1   9:1    0 698.3G  0 raid5 /mnt/RAID_Store
└─sdb1    8:17   0 698.7G  0 part  
  └─md0   9:0    0     2T  0 raid5 /home
sr0      11:0    1  1024M  0 rom   
sde       8:64   0 931.5G  0 disk  
├─sde2    8:66   0 232.9G  0 part  
│ └─md1   9:1    0 698.3G  0 raid5 /mnt/RAID_Store
└─sde1    8:65   0 698.7G  0 part  
  └─md0   9:0    0     2T  0 raid5 /home
sdc       8:32   0 931.5G  0 disk  
├─sdc2    8:34   0 232.9G  0 part  
│ └─md1   9:1    0 698.3G  0 raid5 /mnt/RAID_Store
└─sdc1    8:33   0 698.7G  0 part  
  └─md0   9:0    0     2T  0 raid5 /home
sda       8:0    0   2.7T  0 disk  
├─sda4    8:4    0 476.9G  0 part  /mnt/sda4_Home
├─sda2    8:2    0  45.8G  0 part  [SWAP]
├─sda5    8:5    0   1.1T  0 part  /mnt/sda5_BackUps
├─sda3    8:3    0  95.4G  0 part  /
├─sda1    8:1    0    18M  0 part  
└─sda6    8:6    0   1.1T  0 part  /mnt/sda6_Shared
If you're wondering about the partitioned RAID, that was before I discovered Timeshift "wouln't do" RAID. One day I'll get around to recreating 'em as md0 only.
Last edited by lazarus on Sat Aug 18, 2018 2:23 am, edited 1 time in total.
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

Ok, you can try unmounting the drives then running sudo fsck -f /dev/sdXN where X is the letter and N is the partition number to check. You can also try sudo fsck -f /dev/md0 and sudo fsck -f /dev/md1. These will reveal if there are any file system issues. Make sure you unmount the drive being checked first.. If it's happening to your / partition, doi it from a live USB or DVD.

What I think is happening is that your ageing machine can't keep up with the kernel messages :) so you see messages that you wouldn't normally see. I'm fairly certain that an fsck runs automatically on every boot, but it's only a check to make sure the journals are clean, it's not a full check. I think this is what you are seeing.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

catweazel wrote: ⤴Sat Aug 18, 2018 2:13 amWhat I think is happening is that your ageing machine can't keep up with the kernel messages :) so you see messages that you wouldn't normally see. I'm fairly certain that an fsck runs automatically on every boot, but it's only a check to make sure the journals are clean, it's not a full check. I think this is what you are seeing.
That wouldn't be surprising. So the boot fsck is default? I know it can be disabled with the fastboot option in grub, but I wasn't sure whether I'd enabled that or not.

I've already manually fsck'd all drives as a precaution; it was the first thing I did along with checking smartctl for low level issues.

But the BIOS... oh, yes. The BIOS. Good call. Maybe that'll patch some of the other warns & oddities I'm currently chasing down. :oops:

Thank you kindly for your time and patience, sirrah!
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

One more thing to check, run the Disks utility and select SMART Data & Self-Tests. I think that for the RAID arrays, you'll have to stop them completely before you can check the disks.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

lazarus wrote: ⤴Sat Aug 18, 2018 2:20 am sirrah!
Sirrah? HURRUMPH! I'm 85, junior :wink: :lol:

Ok, based on your response, you probably don't have anything to worry about but I would still check the SMART values for the drives.

Cheers.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
lazarus

Re: LM18.3 queries on boot fsck check

Post by lazarus »

OK, BIOS fully updated... along with a nasty scare. It hung on boot until I flushed the CMOS, then went in to reconfigure most settings.

No real changes to the logfiles, all the pre-existing warns are still there, although I didn't spot the fsck msg this time around. Still, I suspect you're right about the cause of that and it'll be back soon enough.

I do have a concern about the RAID; BIOS re-detected drive order differently, hence mountlist for the RAID is screwy. Thank God for superblocks! I'll make a new thread for this, though. This one is [SOLVED] well enough for me.

Thank you again, Catweasel. I'm sooo glad you're only semi-retired from the 'help desk.' :D
Last edited by lazarus on Sat Aug 18, 2018 3:32 am, edited 2 times in total.
Top
HaveaMint
Level 6
Level 6
Posts: 1085
Joined: Fri Feb 02, 2018 9:56 pm

Re: LM18.3 queries on boot fsck check

Post by HaveaMint »

catweazel wrote: ⤴Sat Aug 18, 2018 2:27 am
lazarus wrote: ⤴Sat Aug 18, 2018 2:20 am sirrah!
Sirrah? HURRUMPH! I'm 85, junior :wink: :lol:

Ok, based on your response, you probably don't have anything to worry about but I would still check the SMART values for the drives.

Cheers.
My understanding is it is set to check in fstab
Controls the order in which fsck checks the device/partition for errors at boot time. The root device should be 1. Other partitions should be 2, or 0 to disable checking.
https://help.ubuntu.com/community/Fstab
"Tune for maximum Smoke and then read the Instructions".
Top
User avatar
catweazel
Level 19
Level 19
Posts: 9763
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: LM18.3 queries on boot fsck check

Post by catweazel »

lazarus wrote: ⤴Sat Aug 18, 2018 3:29 am I do have a concern about the RAID (BIOS re-detected drive order differently, hence mountlist for the RAID is screwy. Thank God for superblocks! I'll make a new thread for this, though. This one is [SOLVED] well enough for me.
mdadm --assemble --scan
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.
Top
User avatar
slipstick
Level 6
Level 6
Posts: 1071
Joined: Sun Oct 21, 2012 9:56 pm
Location: Somewhere on the /LL0 scale

Re: LM18.3 queries on boot fsck check

Post by slipstick »

HaveaMint wrote: ⤴Sat Aug 18, 2018 3:30 am My understanding is it is set to check in fstab
Controls the order in which fsck checks the device/partition for errors at boot time. The root device should be 1. Other partitions should be 2, or 0 to disable checking.
https://help.ubuntu.com/community/Fstab
According to a book I have - "A Practical Guide to Ubuntu Linux" by Mark G. Sobell:

"Root (/) should have a 1 in this column. Filesystems that are mounted to a dirctory just below the root directory should have a 2. Filesystems that are mounted on another mounted filesystem (other than root) should have a 3. For example, if local is a separate filesystem from /usr and is mounted on /usr (as /usr/local), then local should have a 3. Filesystems and directory hierarchies that do not need to be checked (for example, remotely mounted directory hierarchies and CDs/DVDs) should have a 0."

No other place I've seen has the "3" option - I wonder if that really does anything different than "2".
In theory, theory and practice are the same. In practice, they ain't.
Top
HaveaMint
Level 6
Level 6
Posts: 1085
Joined: Fri Feb 02, 2018 9:56 pm

Re: LM18.3 queries on boot fsck check

Post by HaveaMint »

slipstick wrote: ⤴Sat Aug 18, 2018 3:44 am
HaveaMint wrote: ⤴Sat Aug 18, 2018 3:30 am My understanding is it is set to check in fstab
Controls the order in which fsck checks the device/partition for errors at boot time. The root device should be 1. Other partitions should be 2, or 0 to disable checking.
https://help.ubuntu.com/community/Fstab
According to a book I have - "A Practical Guide to Ubuntu Linux" by Mark G. Sobell:

"Root (/) should have a 1 in this column. Filesystems that are mounted to a dirctory just below the root directory should have a 2. Filesystems that are mounted on another mounted filesystem (other than root) should have a 3. For example, if local is a separate filesystem from /usr and is mounted on /usr (as /usr/local), then local should have a 3. Filesystems and directory hierarchies that do not need to be checked (for example, remotely mounted directory hierarchies and CDs/DVDs) should have a 0."

No other place I've seen has the "3" option - I wonder if that really does anything different than "2".
/swap,/cd =0 /efi,/=1 all others=2. Default install I don't have any 3's
"Tune for maximum Smoke and then read the Instructions".
Top
Locked

Return to “Installation & Boot”