Installing Mint 18.3 from USB gives no options

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help
Post Reply
Tuxkid
Level 2
Level 2
Posts: 50
Joined: Sun Nov 01, 2015 9:53 pm

Installing Mint 18.3 from USB gives no options

Post by Tuxkid » Tue Nov 06, 2018 5:14 am

I've used LM 17.3 for a long time and wanted to install 18.3 on the same disk.

However, I found no options that responded. There was a screen that looked like it gave options, but clicking boxes had no effect.
In the end, I could only install to the whole disk and format (i.e.) destroy everything on it. For previous versions I could resize partitions, select what file system to use, how much of the disk to use, etc.

Is that the new way of doing things?

User avatar
Moem
Level 19
Level 19
Posts: 9545
Joined: Tue Nov 17, 2015 9:14 am
Location: The Netherlands
Contact:

Re: Installing Mint 18.3 from USB gives no options

Post by Moem » Tue Nov 06, 2018 5:22 am

No, that's not the new way of doing things (also 18.3 is not new, but okay). Can you post a screenshot of the HD in GParted? Is there any free space? If there is no free space, you will not be offered the option to install alongside.
Image

If your issue is solved, kindly indicate that by editing the first post in the topic, and adding [SOLVED] to the title. Thanks!

User avatar
pbear
Level 8
Level 8
Posts: 2451
Joined: Wed Jun 21, 2017 12:25 pm
Location: San Francisco

Re: Installing Mint 18.3 from USB gives no options

Post by pbear » Tue Nov 06, 2018 1:58 pm

Too late now, I suppose, but what you should have used Tuxkid was the "Something Else" method. That's where you'll find the options you describe.
Time flies like an arrow. Fruit flies like a banana.
If your problem has been solved, please edit the thread title.

Tuxkid
Level 2
Level 2
Posts: 50
Joined: Sun Nov 01, 2015 9:53 pm

Re: Installing Mint 18.3 from USB gives no options

Post by Tuxkid » Wed Nov 07, 2018 4:59 am

Moem wrote:
Tue Nov 06, 2018 5:22 am
No, that's not the new way of doing things (also 18.3 is not new, but okay). Can you post a screenshot of the HD in GParted? Is there any free space? If there is no free space, you will not be offered the option to install alongside.
I've only ever used GParted from a boot disk, but this shows I have plenty of space.

Code: Select all

> df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            3.9G   12K  3.9G   1% /dev
tmpfs           794M  1.5M  792M   1% /run
/dev/dm-0       909G  327G  537G  38% /
none            4.0K     0  4.0K   0% /sys/fs/cgroup
none            5.0M  4.0K  5.0M   1% /run/lock
none            3.9G  234M  3.7G   6% /run/shm
none            100M   48K  100M   1% /run/user
/dev/sdb1       236M   83M  141M  38% /boot
I gave up and decided to buy a new laptop (which of course had Windows 10 on it) with a half-terabyte disk so plenty of room. Windows didn't take up all of a new disk. I tried to dual-boot Win-10 and LinuxMint 18.3 (so I could still use KDE). I tried Mint 18.3, Kubuntu 18.04 and KDE Neon but in none of them could I find out how to repartition a fairly large disk. I got tired of looking and let it have its way, so now no dual boot -- which probably doesn't matter, but I'd like to know for future reference.

Tuxkid
Level 2
Level 2
Posts: 50
Joined: Sun Nov 01, 2015 9:53 pm

Re: Installing Mint 18.3 from USB gives no options

Post by Tuxkid » Wed Nov 07, 2018 5:04 am

pbear wrote:
Tue Nov 06, 2018 1:58 pm
Too late now, I suppose, but what you should have used Tuxkid was the "Something Else" method. That's where you'll find the options you describe.
I don't recall seeing "Something Else" but I do remember a box for 'Manual' which I thought was what I wanted, but when I tried to tick a box, nothing happened. It was nothing like the dialog I'd seen for previous versions.

User avatar
lsemmens
Level 9
Level 9
Posts: 2588
Joined: Wed Sep 10, 2014 9:07 pm
Location: Rural South Australia

Re: Installing Mint 18.3 from USB gives no options

Post by lsemmens » Wed Nov 07, 2018 5:54 am

I just "upgraded" a computer from 18.3 to 19 and it offered to install 19 alongside 18.3 which is not what I needed, so I optioned to blow it all away and use the whole drive for Mint 19. The option for installing alongside another OS is definitely there.
Kernel: 4.15.0-46-generic x86_64 bits
Desktop: Cinnamon 3.8.9
Distro: Linux Mint 19 Tara

Laptop HP-ProBook-470-G2 8Gb RAM SSD
Server AMD Phenom 9650 - GEForce 9400GT 6Gb RAM
+ three other Mint machines
Out of my mind - please leave a message

User avatar
Sgthawker
Level 4
Level 4
Posts: 213
Joined: Sun Apr 27, 2014 2:23 am

Re: Installing Mint 18.3 from USB gives no options

Post by Sgthawker » Wed Nov 07, 2018 9:01 am

It is best to free up space using windows disk management tool leaving space unallocated. Then use gparted from the live boot to partition as needed, then install Mint.
Keep in mind to turn off fast restart in windows, and secure boot and fast boot in the firmware.
LM 18.3 KDE/LM 19.1 Cinnamon/Peppermint 10 KDEneon UEFI on Sabertooth Z170 S, i6700K, Echelon GTX950, Samsung 970 Pro M.2 NVMe
LM 19.1 Cinnamon UEFI on Asus ROG STRIX laptop, i7700 HQ, GTX 1060, Samsung 970 Pro M.2 NVMe

User avatar
pbear
Level 8
Level 8
Posts: 2451
Joined: Wed Jun 21, 2017 12:25 pm
Location: San Francisco

Re: Installing Mint 18.3 from USB gives no options

Post by pbear » Thu Nov 08, 2018 1:38 am

Tuxkid wrote:
Wed Nov 07, 2018 5:04 am
pbear wrote:
Tue Nov 06, 2018 1:58 pm
Too late now, I suppose, but what you should have used Tuxkid was the "Something Else" method. That's where you'll find the options you describe.
I don't recall seeing "Something Else"
Why would I make this up? In fact, the Installation Type screen is the same for both:

InstallationType18.png
InstallationType17.png
Both images pulled from VirtualBox, as if reinstalling from ISO.
Time flies like an arrow. Fruit flies like a banana.
If your problem has been solved, please edit the thread title.

Tuxkid
Level 2
Level 2
Posts: 50
Joined: Sun Nov 01, 2015 9:53 pm

Re: Installing Mint 18.3 from USB gives no options

Post by Tuxkid » Thu Nov 08, 2018 2:47 am

pbear wrote:
Thu Nov 08, 2018 1:38 am
Tuxkid wrote:
Wed Nov 07, 2018 5:04 am
pbear wrote:
Tue Nov 06, 2018 1:58 pm
Too late now, I suppose, but what you should have used Tuxkid was the "Something Else" method. That's where you'll find the options you describe.
I don't recall seeing "Something Else"
Why would I make this up? In fact, the Installation Type screen is the same for both:
I wasn't inferring that you made it up. It's my memory of what I saw a month or so ago is defective. I can't believe I was so unobservant! I had a memory of the bottom one labelled "manual". Could it be different for installing KDE?
I avoid upgrading OSes as much as possible, so there's a big gap between the times I do so. An ailing memory doesn't help.
InstallationType18.pngInstallationType17.png

Both images pulled from VirtualBox, as if reinstalling from ISO.

User avatar
pbear
Level 8
Level 8
Posts: 2451
Joined: Wed Jun 21, 2017 12:25 pm
Location: San Francisco

Re: Installing Mint 18.3 from USB gives no options

Post by pbear » Thu Nov 08, 2018 4:34 am

Tuxkid wrote:
Thu Nov 08, 2018 2:47 am
Could it be different for installing KDE?
Turns out, yes. That's why it's important to include such information in the OP, so folks don't waste their time answering the wrong question.

Anyhoo, as far as I can tell, Manual in KDE is identical to Something Else in the other desktops, but I'll let someone with more KDE experience try to figure out what you're doing wrong. And, you know, it would help a lot if you started with the realization you're probably doing something wrong.

Good luck.
Time flies like an arrow. Fruit flies like a banana.
If your problem has been solved, please edit the thread title.

Tuxkid
Level 2
Level 2
Posts: 50
Joined: Sun Nov 01, 2015 9:53 pm

Re: Installing Mint 18.3 from USB gives no options

Post by Tuxkid » Sat Nov 10, 2018 4:07 am

pbear wrote:
Thu Nov 08, 2018 4:34 am
Tuxkid wrote:
Thu Nov 08, 2018 2:47 am
Could it be different for installing KDE?
Turns out, yes. That's why it's important to include such information in the OP, so folks don't waste their time answering the wrong question.
It never occurred to me that the difference using KDE came into effect at that early stage. Decisions are made as to where; decisions are being made as to what, I thought, are being made rather later. So I thought there'd be no difference at that stage. More fool me.
.. And, you know, it would help a lot if you started with the realization you're probably doing something wrong.

Good luck.
I thought it was implicit that I was missing something, not offering a HowTo.

Thanks for clearing that up. I wasn't imagining that I had seen the word 'manual' where other people saw 'something else'.

Post Reply

Return to “Installation & Boot”