[Solved] Can the LMDE 3 Kernel be upgraded to 4.15.0 for installation?

Questions about Grub, the liveCD and the installer
Forum rules
Before you post please read how to get help
Post Reply
Tw Free Thomas
Level 1
Level 1
Posts: 13
Joined: Sun Jan 27, 2019 3:05 am
Location: Taiwan

[Solved] Can the LMDE 3 Kernel be upgraded to 4.15.0 for installation?

Post by Tw Free Thomas » Sun Jan 27, 2019 8:36 am

LMDE 3 does not automatically connect after a new computer,
but Linux Mint 19 Can be automatically connected,
so the installation is smooth,
I do not know if the problem is on the Intel i219V.

Code: Select all

System:    Host: freetw Kernel: 4.15.0-43-generic x86_64 bits: 64 compiler: gcc v: 7.3.0 
           Desktop: Cinnamon 4.0.9 Distro: Linux Mint 19.1 Tessa base: Ubuntu 18.04 bionic 
Machine:   Type: Desktop Mobo: Micro-Star model: B360M MORTAR TITANIUM (MS-7B23) v: 2.0 serial: <filter> 
           UEFI [Legacy]: American Megatrends v: A.30 date: 07/18/2018 
CPU:       Topology: Quad Core model: Intel Core i3-8100 bits: 64 type: MCP arch: Kaby Lake rev: B 
           L2 cache: 6144 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800 
           Speed: 800 MHz min/max: 800/3600 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
Graphics:  Device-1: NVIDIA GP108 vendor: Micro-Star MSI driver: nvidia v: 390.77 bus ID: 01:00.0 
           Display: x11 server: X.Org 1.19.6 driver: nvidia unloaded: fbdev,modesetting,nouveau,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: GeForce GT 1030/PCIe/SSE2 v: 4.6.0 NVIDIA 390.77 direct render: Yes 
Audio:     Device-1: Intel vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 00:1f.3 
           Device-2: NVIDIA GP108 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel 
           v: kernel bus ID: 01:00.1 
           Sound Server: ALSA v: k4.15.0-43-generic 
Network:   Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: 3.2.6-k port: efa0 
           bus ID: 00:1f.6 
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    Local Storage: total: 1.13 TiB used: 64.34 GiB (5.6%) 
           ID-1: /dev/sda vendor: Seagate model: ST1000DM010-2EP102 size: 931.51 GiB 
           ID-2: /dev/sdb vendor: Kingston model: SUV500240G size: 223.57 GiB 
Partition: ID-1: / size: 219.06 GiB used: 21.90 GiB (10.0%) fs: ext4 dev: /dev/sdb1 
           ID-2: /boot size: 3.78 GiB used: 161.2 MiB (4.2%) fs: ext4 dev: /dev/sda2 
           ID-3: /home size: 904.36 GiB used: 42.29 GiB (4.7%) fs: ext4 dev: /dev/sda3 
           ID-4: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 36.0 C mobo: N/A gpu: nvidia temp: 27 C 
           Fan Speeds (RPM): N/A gpu: nvidia fan: 35% 
Info:      Processes: 200 Uptime: 29m Memory: 7.73 GiB used: 1.01 GiB (13.1%) Init: systemd runlevel: 5 
           Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19 inxi: 3.0.27
Last edited by Tw Free Thomas on Tue Jan 29, 2019 8:32 am, edited 2 times in total.

zorzi

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by zorzi » Mon Jan 28, 2019 3:33 am

Hello,

Your problem is not clear to me.

What do you mean by "LMDE 3 does not automatically connect after a new computer" ?

Tw Free Thomas
Level 1
Level 1
Posts: 13
Joined: Sun Jan 27, 2019 3:05 am
Location: Taiwan

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by Tw Free Thomas » Mon Jan 28, 2019 6:52 am

Thank you for your help

The old computer (2012) motherboard is MSI H61M-P20
installed LM18 LM19 LMDE2 LMDE3 is very smooth.

The new computer (2019) motherboard is MSI B360M MORTAR TITANIUM
Only LM19 can be installed smoothly.
LM18 LMDE2 LMDE3 failed to connect due to installation
(X appears in the connection graphic), so the installation failed.

Code: Select all

MSI H61M-P20 SPECIFICATIONS
Processor Support
■ Support 3rd generation Intel ® CoreTM i7/ CoreTM i5/ CoreTM i3/ Pentium ® /
Celeron ® processors for LGA1155 socket
(For the latest information about CPU, please visit
http://www.msi.com/service/cpu-support)
Chipset
■ Intel ® H61 chipset
Memory Support
■ 2 DDR3 DIMMs support DDR3 1333/ 1066 SDRAM (total Max. 16GB)
■ Supports Dual-Channel mode
(For more information on compatible components, please visit
http://www.msi.com/service/test-report)
LAN
■ Supports LAN 10/ 100 by Realtek ® 8105E (H61M-P20 (G3))
■ Supports LAN 10/ 100/ 1000 by Realtek ® 8111E (H61M-P31 (G3))
Audio
■ Chip integrated by Realtek ® ALC887
■ Supports 8-channels audio out
■ Compliant with Azalia 1.0 Spec
SATA
■ 4 SATA 3Gb/s ports by Intel ® H61
Connectors
■ Back panel
‐ 1 PS/2 mouse port
‐ 1 PS/2 keyboard port
‐ 1 DVI-D port*
‐ 1 VGA port*
‐ 6 USB 2.0 ports
‐ 1 LAN jack
‐ 3 flexible audio jacks**
*(The DVI-D & VGA ports only work with Integrated Graphics Processor.)
**(To reach the 8-channel sound effect, the 7th and 8th channels must be
outputted from front panel.)
12MS-7788
■ On-Board Connectors
‐ 2 USB 2.0 connectors
‐ 1 Front Panel Audio connector
‐ 1 Parallel Port connector (optional)
‐ 1 Serial Port connector (optional)
‐ 1 TPM connector (optional)
‐ 1 Chassis Intrusion connector
Slots
■ 1 PCIe 3.0 x16 slot
■ 1 PCIe 2.0 x1 slot
Form Factor
■ Micro-ATX (22.6 cm X 17.3 cm)

User avatar
karlchen
Level 20
Level 20
Posts: 11309
Joined: Sat Dec 31, 2011 7:21 am
Location: Germany

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by karlchen » Mon Jan 28, 2019 7:12 am

Hello, TW Free Thomas.

As the inxi report, section "Network" clearly shows that the ethernet connection is up, i.e. card detected, driver e1000e loaded, network state up, the question remains unanswered:
Which network connection fails?
The computer fails to connect to which target?

Code: Select all

Network:   Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: 3.2.6-k port: efa0 
           bus ID: 00:1f.6 
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
Oops, this was the inxi report form the successful LM 19.1 installation. Which does not illustrate the problem.

Could you please post the same inxi report from the failing LMDE3 installation? - Which should illustrate the problem.

Regards,
Karl
Image
Linux Mint 19.2 32-bit xfce Desktop, Total Commander 9.22a 32-bit
Haß gleicht einer Krankheit, dem Miserere, wo man vorne herausgibt, was eigentlich hinten wegsollte. (Goethe)

User avatar
Pierre
Level 19
Level 19
Posts: 9049
Joined: Fri Sep 05, 2008 5:33 am
Location: Perth, AU.

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by Pierre » Mon Jan 28, 2019 7:13 am

to clarify, even more:
- are you referring to an Active Internet Connection,
that is used During the Actual Installation ?.
& that you do need that Internet Connection during the Actual Installation ?.
Image
Please edit your original post title to include [SOLVED] - when your problem is solved!
and DO LOOK at those Unanswered Topics - - you may be able to answer some!.

Tw Free Thomas
Level 1
Level 1
Posts: 13
Joined: Sun Jan 27, 2019 3:05 am
Location: Taiwan

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by Tw Free Thomas » Mon Jan 28, 2019 9:18 am

Remove the original HDD and SDD and replace it with the test HDD.
And attach the Logfile

Code: Select all

inxi -Fxz
System:    Host: freetw Kernel: 4.9.0-8-amd64 x86_64 (64 bit gcc: 6.3.0)
           Desktop: Cinnamon 3.8.8 (Gtk 3.22.11-1) Distro: LMDE 3 (cindy)
Machine:   Device: desktop Mobo: Micro-Star model: B360M MORTAR TITANIUM (MS-7B23) v: 2.0
           UEFI [Legacy]: American Megatrends v: A.30 date: 07/18/2018
CPU:       Quad core Intel Core i3-8100 (-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28800
           clock speeds: max: 3600 MHz 1: 2742 MHz 2: 799 MHz 3: 2824 MHz
           4: 810 MHz
Graphics:  Card: NVIDIA GP108 bus-ID: 01:00.0
           Display Server: X.Org 1.19.2 drivers: vesa,nouveau (unloaded: modesetting,fbdev)
           Resolution: 1024x768@61.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.9, 256 bits)
           GLX Version: 3.0 Mesa 13.0.6 Direct Rendering: Yes
Audio:     Card-1 NVIDIA Device 0fb8 driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Intel Device a348 driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k4.9.0-8-amd64
Network:   Card: Intel Device 15bc bus-ID: 00:1f.6
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 280.9GB (13.5% used)
           ID-1: /dev/sda model: ST3250620AS size: 249.9GB
           ID-2: USB /dev/sdb model: FLASH_DRIVE size: 31.0GB
Partition: ID-1: / size: 77G used: 4.5G (7%) fs: ext4 dev: /dev/sda2
           ID-2: /boot size: 1.9G used: 57M (4%) fs: ext4 dev: /dev/sda1
           ID-3: /home size: 142G used: 4.0G (3%) fs: ext4 dev: /dev/sda4
           ID-4: swap-1 size: 8.39GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
Sensors:   System Temperatures: cpu: 27.8C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 193 Uptime: 6 min Memory: 841.6/7926.7MB
           Init: systemd runlevel: 5 Gcc sys: 6.3.0

Code: Select all

Network:   Card: Intel Device 15bc bus-ID: 00:1f.6
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Attachments
Logfile.txt
(14.21 KiB) Downloaded 62 times

User avatar
karlchen
Level 20
Level 20
Posts: 11309
Joined: Sat Dec 31, 2011 7:21 am
Location: Germany

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by karlchen » Mon Jan 28, 2019 10:08 am

Hi, TW Free Thomas.

Thanks for the inxi report and the syslog extract.

So this is actually in both cases, Mint 19.1 inxi report and LMDE 3 inxi report, the same computer, only LMDE3 is on a different harddisk.

So the same ethernet interface card is recognized by LM 19.1 correctly as

Code: Select all

Network:   Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: 3.2.6-k port: efa0 
           bus ID: 00:1f.6 
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
But LMDE 3 seems not to recognize it and does not load any driver software and the card is dead as a result:

Code: Select all

Network:   Card: Intel Device 15bc bus-ID: 00:1f.6
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Regards,
Karl
Image
Linux Mint 19.2 32-bit xfce Desktop, Total Commander 9.22a 32-bit
Haß gleicht einer Krankheit, dem Miserere, wo man vorne herausgibt, was eigentlich hinten wegsollte. (Goethe)

Tw Free Thomas
Level 1
Level 1
Posts: 13
Joined: Sun Jan 27, 2019 3:05 am
Location: Taiwan

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by Tw Free Thomas » Mon Jan 28, 2019 12:05 pm

Hi, Karl
Thank you for your help

When you go to https://cateee.net/lkddb/web-lkddb/E1000E.html
You can see the code of Intel Device 15bc.
Because MSI B360M MORTAR TITANIUM is new motherboard may need Kernel 4.15. above.
Just installed LMDE 3 and Linux Mint 18.3 failed to connect.
I found that it is lower than Kernel 4.15, The probability of failure is very high.
The following is the version and use of Kernel
Linux Mint 19.1 Kernel 4.15.0-43-generic x86_64
Linux Mint 18.3 Kernel 4.10
LMDE3 Kernel 4.9.0-8-amd64 x86_64
Linux Mint 18 kernel 4.4
My idea is that the old Kernel can't support the new motherboard.
So you can explain the live situation.
The old computer (2012) motherboard is MSI H61M-P20
Installed LM18 LM19 LMDE2 LMDE3 is very smooth.

The new computer (2019) motherboard is MSI B360M MORTAR TITANIUM
Only LM19 can be installed smoothly.
LM18 LMDE2 LMDE3 failed to connect due to installation
(X appears in the connection graphic), so the installation failed.

So as far as you say, LMDE 3 doesn't seem to recognize it and
doesn't load any driver software, so it's stuck.

Thank you very much for your help.

Tw Free Thomas
Level 1
Level 1
Posts: 13
Joined: Sun Jan 27, 2019 3:05 am
Location: Taiwan

Re: LMDE 3 installation system cannot be automatically connected and cannot be installed

Post by Tw Free Thomas » Tue Jan 29, 2019 5:42 am

Because Linux mint only has LM 19 its Kernel 4.15.0,
Can be automatically connected, so the installation is smooth,
so look for three installation tests,
MANJARO (Kernel: 4.19.0)
MX Linux (Kernel: 4.19.0)
Zorin 12 (Kernel: 4.15.0)
Because these three are Kernel 4.15.0 (inclusive) or above,
Can be automatically connected, so the installation is smooth.
LM19 and LMDE3, because they are free to use
Other operating systems can't do it, I still like it most.
LM19 and LMDE3, so LMDE3 (Kernel: 4.9.0)
After lifting, it should be the same as LM 19,
and the speed is faster than LM 19.

The test yields inxi -Fxz as follows


MANJARO

System: Host: tango Kernel: 4.19.0-3-MANJARO x86_64 bits: 64 compiler: gcc v: 8.2.1 Desktop: Xfce 4.13.2git-UNKNOWN
Distro: Manjaro Linux
Machine: Type: Desktop Mobo: Micro-Star model: B360M MORTAR TITANIUM (MS-7B23) v: 2.0 serial: <filter>
UEFI [Legacy]: American Megatrends v: A.30 date: 07/18/2018
CPU: Topology: Quad Core model: Intel Core i3-8100 bits: 64 type: MCP arch: Kaby Lake rev: B L2 cache: 6144 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28808
Speed: 3601 MHz min/max: 800/3600 MHz Core speeds (MHz): 1: 3600 2: 3600 3: 3600 4: 3600
Graphics: Device-1: NVIDIA GP108 [GeForce GT 1030] vendor: Micro-Star MSI driver: nouveau v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.20.3 driver: nouveau unloaded: modesetting resolution: 1920x1080~60Hz
OpenGL: renderer: NV138 v: 4.3 Mesa 18.2.3 direct render: Yes
Audio: Device-1: Intel Cannon Lake PCH cAVS vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Device-2: NVIDIA GP108 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1
Sound Server: ALSA v: k4.19.0-3-MANJARO
Network: Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: 3.2.6-k port: efa0 bus ID: 00:1f.6
IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>

Drives: Local Storage: total: 261.62 GiB used: 5.86 GiB (2.2%)
ID-1: /dev/sda vendor: Seagate model: ST3250620AS size: 232.76 GiB
ID-2: /dev/sdb type: USB model: USB3.0 FLASH DRIVE size: 28.86 GiB
Partition: ID-1: / size: 219.44 GiB used: 5.86 GiB (2.7%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 8.80 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 36.0 C mobo: N/A gpu: nouveau temp: 27 C
Fan Speeds (RPM): N/A
Info: Processes: 170 Uptime: 4m Memory: 7.73 GiB used: 559.8 MiB (7.1%) Init: systemd Compilers: gcc: 8.2.1 Shell: bash
v: 4.4.23 inxi: 3.0.27



MX Linux

System:
Host: mx Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 Distro: MX-18_386 Continuum Dec 20 2018
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Desktop Mobo: Micro-Star model: B360M MORTAR TITANIUM (MS-7B23)
v: 2.0 serial: <filter> UEFI [Legacy]: American Megatrends v: A.30
date: 07/18/2018
CPU:Because Linux mint only has LM 19 its Kernel 4.15.0,
Can be automatically connected, so the installation is smooth, so look for three installation tests,
MANJARO (Kernel: 4.19.0)
MX Linux (Kernel: 4.19.0)
Zorin 12 (Kernel: 4.15.0)
Because these three are Kernel 4.15.0 (inclusive) or above,
Can be automatically connected, so the installation is smooth, I still like it most.
LM19 and LMDE3, because they are free to use
Other operating systems are available, so LMDE3
(Kernel: 4.9.0) Is it possible to improve.....

The test yields inxi -Fxz as follows
Topology: Quad Core model: Intel Core i3-8100 bits: 64 type: MCP
arch: Kaby Lake rev: B L2 cache: 6144 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800
Speed: 1061 MHz min/max: 800/3600 MHz Core speeds (MHz): 1: 800 2: 800
3: 800 4: 800
Graphics:
Device-1: NVIDIA GP108 driver: nouveau v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.19.2 driver: nouveau
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: NV138 v: 4.3 Mesa 18.2.6 direct render: Yes
Audio:
Device-1: Intel driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Device-2: NVIDIA driver: snd_hda_intel v: kernel bus ID: 01:00.1
Sound Server: ALSA v: k4.19.0-1-686-pae
Network:
Device-1: Intel driver: e1000e v: 3.2.6-k port: efa0 bus ID: 00:1f.6
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>

Drives:
Local Storage: total: 261.62 GiB used: 6.31 GiB (2.4%)
ID-1: /dev/sda vendor: Seagate model: ST3250620AS size: 232.76 GiB
ID-2: /dev/sdb type: USB model: USB3.0 FLASH DRIVE size: 28.86 GiB
Partition:
ID-1: / size: 226.11 GiB used: 6.27 GiB (2.8%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2
Sensors:
System Temperatures: cpu: 30.0 C mobo: N/A gpu: nouveau temp: 26 C
Fan Speeds (RPM): N/A
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://ftp.yzu.edu.tw/Linux/mx-workspace/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.tw.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.tw.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.yzu.edu.tw/Linux/mx-workspace/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info:
Processes: 190 Uptime: 17m Memory: 7.77 GiB used: 456.0 MiB (5.7%)
Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12
inxi: 3.0.25



Zorin 12 xenial

System: Host: freetw Kernel: 4.15.0-30-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Gnome 3.18.5 (Gtk 3.18.9-1ubuntu3.3+zorin1) Distro: Zorin 12 xenial
Machine: Mobo: Micro-Star model: B360M MORTAR TITANIUM (MS-7B23) v: 2.0
Bios: American Megatrends v: A.30 date: 07/18/2018
CPU: Quad core Intel Core i3-8100 (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28800
clock speeds: max: 3600 MHz 1: 800 MHz 2: 800 MHz 3: 800 MHz 4: 800 MHz
Graphics: Card: NVIDIA Device 1d01 bus-ID: 01:00.0
Display Server: X.Org 1.19.6 driver: N/A Resolution: 1920x1080@60.00hz
GLX Renderer: llvmpipe (LLVM 6.0, 256 bits) GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes
Audio: Card-1 NVIDIA Device 0fb8 driver: snd_hda_intel bus-ID: 01:00.1 Sound: ALSA v: k4.15.0-30-generic
Card-2 Intel Device a348 driver: snd_hda_intel bus-ID: 00:1f.3
Network: Card: Intel Device 15bc driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>

Drives: HDD Total Size: 249.9GB (3.8% used) ID-1: /dev/sda model: ST3250620AS size: 249.9GB temp: 36C
Partition: ID-1: / size: 229G used: 8.1G (4%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 27.8C mobo: N/A gpu: 26.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 209 Uptime: 25 min Memory: 1330.1/7916.1MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35

zorzi

Re: [Solved] Can the LMDE 3 Kernel be upgraded to 4.15.0 for installation?

Post by zorzi » Tue Jan 29, 2019 4:51 pm

Well, it's still possible in some cases to upgrade LMDE3 to a newer kernel (4.19) by activating stretch-backports.

You had no internet connection at all on LMDE3 (wifi, ethernet) ?

Tw Free Thomas
Level 1
Level 1
Posts: 13
Joined: Sun Jan 27, 2019 3:05 am
Location: Taiwan

Re: [Solved] Can the LMDE 3 Kernel be upgraded to 4.15.0 for installation?

Post by Tw Free Thomas » Tue Jan 29, 2019 7:53 pm

Hi zorzi
I most hope that LMDE is better in Kernel and performance than LM.
You don't have to rely on Ubuntu in the future.

Post Reply

Return to “Installation & Boot”