Cursor freeze on Mint 19

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
drwho
Level 1
Level 1
Posts: 25
Joined: Mon Sep 10, 2012 10:28 pm

Cursor freeze on Mint 19

Post by drwho » Fri Jul 20, 2018 9:49 am

Cursor freeze (only the cursor) -
I have a Lenovo 320 with a Synaptics touchpad.
I am running Linux Mint 19 with Mate desktop. Every day or two, the touchpad stops working. Everything else still works and I can use a USB mouse. I have not noted any commonality between these occurrences - It doesn't seem to matter which apps are open or on focus, whether or not the browser is started, or what I am doing at the time. It has happened in the email program and the e-reader as well as the browser. It doesn't appear to depend on system resources, because ot has happened with only one small application running. A temporary fix to restart the cursor without having to lose any work is ctrl-alt-del This brings up a dialog box with four options: use the left arrow key (which still works along with the rest of the keyboard) to navigate to the "suspend" option, then click it using the keyboard enter key. This suspends it. Tap the power key to resume from suspend, and everything, including your work is back to how it was before the cursor froze. In a nutshell - suspending then unsuspending temporarily fixes the cursor freeze problem.

drwho
Level 1
Level 1
Posts: 25
Joined: Mon Sep 10, 2012 10:28 pm

Re: Cursor freeze on Mint 19

Post by drwho » Fri Jul 20, 2018 9:59 am

Just an edit -
The title should be 'Touchpad freeze on Mint 19" since the entire touchpad, including the clicker buttons stops working

User avatar
michael louwe
Level 10
Level 10
Posts: 3300
Joined: Sun Sep 11, 2016 11:18 pm

Re: Cursor freeze on Mint 19

Post by michael louwe » Fri Jul 20, 2018 10:28 am

drwho wrote:.
.
Your laptop may be too new for LM 19's default kernel 4.15.

deepje
Level 1
Level 1
Posts: 1
Joined: Fri Jul 20, 2018 6:00 pm

Re: Cursor freeze on Mint 19

Post by deepje » Fri Jul 20, 2018 6:04 pm

Had the same issue on my Yoga-720. Solved it with the help of the mint release notes https://www.linuxmint.com/rel_tara_cinnamon.php
section Touchpad drivers -> remove the synaptics driver to revert to the libinput default.

The synaptics driver somehow messes up the touchpad.

drwho
Level 1
Level 1
Posts: 25
Joined: Mon Sep 10, 2012 10:28 pm

Re: Cursor freeze on Mint 19

Post by drwho » Fri Jul 20, 2018 8:01 pm

Yes, I replaced the xorg driver with libinput, and there is improvement, but it still freezes every day or rwo

drwho
Level 1
Level 1
Posts: 25
Joined: Mon Sep 10, 2012 10:28 pm

Re: Cursor freeze on Mint 19

Post by drwho » Sat Jul 21, 2018 3:36 pm

FYI - This problem is still present after installation of the new kernel 4.15.0-29.

drwho
Level 1
Level 1
Posts: 25
Joined: Mon Sep 10, 2012 10:28 pm

Re: Cursor freeze on Mint 19

Post by drwho » Sun Aug 12, 2018 1:00 pm

Don't know if this is related, but the earphone jack stopped working. The same (temporary) fix that I use to restore cursor movement (suspend, then unsuspend), also worked for this problem.
P.S. Installing kernel 4.15.0-30 had no effect on the cursor freeze problem.

kaefert
Level 2
Level 2
Posts: 81
Joined: Sun Jan 08, 2012 12:08 pm

Re: Cursor freeze on Mint 19

Post by kaefert » Tue Sep 25, 2018 4:20 am

I have the same problem with the touchpad randomly stopping to work, although I'm still on Linux Mint 18.3 on my Asus N550JV laptop.

I found I can restore touchpad movement by either disabling and reenabling the touchpad with the Fn+F9 hardware keyboard combination, or by switching to another virtual workspace (strg+alt+right/left), although this will not restore the two finger scrolling function. For that I have to suspend the system and wake it up again just as @drwho observed.

entheodora
Level 1
Level 1
Posts: 13
Joined: Tue Nov 20, 2018 3:38 am

Re: Cursor freeze on Mint 19

Post by entheodora » Sat Apr 13, 2019 2:08 am

kaefert wrote:
Tue Sep 25, 2018 4:20 am
I have the same problem with the touchpad randomly stopping to work, although I'm still on Linux Mint 18.3 on my Asus N550JV laptop.

I found I can restore touchpad movement by either disabling and reenabling the touchpad with the Fn+F9 hardware keyboard combination, or by switching to another virtual workspace (strg+alt+right/left), although this will not restore the two finger scrolling function. For that I have to suspend the system and wake it up again just as @drwho observed.
Wow, thank you, I had the same problem with Asus on mint 18, and it worked with Fn+F9!

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Mon Apr 15, 2019 6:00 pm

Hello.
I have the same problem described by drwho.
I have a Lenovo E31-70 and since one update of Mint 19.1, in less than 30 or 40 min using the touchpad, this suddenly freezes and then there are different solutions:
- Restart. But not always works again after rebooting.
- Suspend. The same that restarting, usually works but some times after 3 suspensions still doesn't work.
- Disabling/Enabling Touchpad (Fn + F6). Some times it works at the first time and other after 5 or more Disabling/Enabling doesn't comes to life.
I haven't found a pattern for fail neither to revive it and is going me crazy because with other OS's doesn't happen.
I have tried to change the libinput xorg driver for the synaptics one but doesn't change the behaviour.

Please help.

Thanks :-)

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Tue Apr 16, 2019 3:24 am

I forgot to say that changing to the original kernel of mint 19.1 doesn't change anything. I don't think is a kernel issue.

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Tue Apr 16, 2019 11:22 am

Recently I have booted, worked almost 1 hour, then cursor freezed, and after 4 or 5 disabling/enabling of the touchpad (Fn+F6) I got to revive it and this is the /var/log/Xorg.0.log:

Code: Select all

[     6.126] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[     6.126] X Protocol Version 11, Revision 0
[     6.126] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[     6.126] Current Operating System: Linux komansi-Lenovo-E31-70 4.18.0-15-generic #16~18.04.1-Ubuntu SMP Thu Feb 7 14:06:04 UTC 2019 x86_64
[     6.126] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-15-generic root=UUID=6b32f40e-b32c-41f8-b695-f3ce05701c57 ro quiet splash intel_pstate=disable vt.handoff=1
[     6.126] Build Date: 25 October 2018  04:11:27PM
[     6.126] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[     6.126] Current version of pixman: 0.34.0
[     6.126] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.126] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.126] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 16 09:18:52 2019
[     6.126] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.127] (==) No Layout section.  Using the first Screen section.
[     6.127] (==) No screen section available. Using defaults.
[     6.127] (**) |-->Screen "Default Screen Section" (0)
[     6.127] (**) |   |-->Monitor "<default monitor>"
[     6.128] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.128] (==) Automatically adding devices
[     6.128] (==) Automatically enabling devices
[     6.128] (==) Automatically adding GPU devices
[     6.128] (==) Automatically binding GPU devices
[     6.128] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.128] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.128] 	Entry deleted from font path.
[     6.128] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     6.128] 	Entry deleted from font path.
[     6.128] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     6.128] 	Entry deleted from font path.
[     6.128] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     6.128] 	Entry deleted from font path.
[     6.128] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     6.128] 	Entry deleted from font path.
[     6.128] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     6.128] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.128] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.128] (II) Loader magic: 0x55a7fa5a1020
[     6.128] (II) Module ABI versions:
[     6.128] 	X.Org ANSI C Emulation: 0.4
[     6.128] 	X.Org Video Driver: 23.0
[     6.128] 	X.Org XInput driver : 24.1
[     6.128] 	X.Org Server Extension : 10.0
[     6.129] (++) using VT number 7

[     6.129] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.129] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.144] (--) PCI:*(0:0:2:0) 8086:1616:17aa:381e rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[     6.144] (II) LoadModule: "glx"
[     6.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.155] (II) Module glx: vendor="X.Org Foundation"
[     6.155] 	compiled for 1.19.6, module version = 1.0.0
[     6.155] 	ABI class: X.Org Server Extension, version 10.0
[     6.155] (==) Matched modesetting as autoconfigured driver 0
[     6.155] (==) Matched fbdev as autoconfigured driver 1
[     6.155] (==) Matched vesa as autoconfigured driver 2
[     6.155] (==) Assigned the driver to the xf86ConfigLayout
[     6.155] (II) LoadModule: "modesetting"
[     6.155] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.155] (II) Module modesetting: vendor="X.Org Foundation"
[     6.155] 	compiled for 1.19.6, module version = 1.19.6
[     6.155] 	Module class: X.Org Video Driver
[     6.155] 	ABI class: X.Org Video Driver, version 23.0
[     6.155] (II) LoadModule: "fbdev"
[     6.155] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     6.155] (II) Module fbdev: vendor="X.Org Foundation"
[     6.155] 	compiled for 1.19.3, module version = 0.4.4
[     6.155] 	Module class: X.Org Video Driver
[     6.155] 	ABI class: X.Org Video Driver, version 23.0
[     6.156] (II) LoadModule: "vesa"
[     6.156] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.156] (II) Module vesa: vendor="X.Org Foundation"
[     6.156] 	compiled for 1.19.3, module version = 2.3.4
[     6.156] 	Module class: X.Org Video Driver
[     6.156] 	ABI class: X.Org Video Driver, version 23.0
[     6.156] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.156] (II) FBDEV: driver for framebuffer: fbdev
[     6.156] (II) VESA: driver for VESA chipsets: vesa
[     6.176] (II) modeset(0): using drv /dev/dri/card0
[     6.176] (WW) Falling back to old probe method for fbdev
[     6.176] (II) Loading sub module "fbdevhw"
[     6.176] (II) LoadModule: "fbdevhw"
[     6.176] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.176] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.176] 	compiled for 1.19.6, module version = 0.0.2
[     6.176] 	ABI class: X.Org Video Driver, version 23.0
[     6.176] (WW) Falling back to old probe method for vesa
[     6.176] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.176] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     6.176] (==) modeset(0): RGB weight 888
[     6.176] (==) modeset(0): Default visual is TrueColor
[     6.176] (II) Loading sub module "glamoregl"
[     6.176] (II) LoadModule: "glamoregl"
[     6.176] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.183] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.183] 	compiled for 1.19.6, module version = 1.0.0
[     6.183] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.184] (II) glamor: OpenGL accelerated X.org driver based.
[     6.205] (II) glamor: EGL version 1.4 (DRI2):
[     6.210] (II) modeset(0): glamor initialized
[     6.210] (II) modeset(0): Output eDP-1 has no monitor section
[     6.210] (II) modeset(0): Output DP-1 has no monitor section
[     6.212] (II) modeset(0): Output HDMI-1 has no monitor section
[     6.212] (II) modeset(0): EDID for output eDP-1
[     6.212] (II) modeset(0): Manufacturer: IVO  Model: 533  Serial#: 0
[     6.212] (II) modeset(0): Year: 2014  Week: 0
[     6.212] (II) modeset(0): EDID Version: 1.4
[     6.212] (II) modeset(0): Digital Display Input
[     6.212] (II) modeset(0): 6 bits per channel
[     6.212] (II) modeset(0): Digital interface is DisplayPort
[     6.212] (II) modeset(0): Max Image Size [cm]: horiz.: 29  vert.: 17
[     6.212] (II) modeset(0): Gamma: 2.20
[     6.212] (II) modeset(0): No DPMS capabilities specified
[     6.212] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     6.212] (II) modeset(0): First detailed timing is preferred mode
[     6.212] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     6.212] (II) modeset(0): redX: 0.566 redY: 0.337   greenX: 0.324 greenY: 0.572
[     6.212] (II) modeset(0): blueX: 0.156 blueY: 0.120   whiteX: 0.312 whiteY: 0.328
[     6.212] (II) modeset(0): Manufacturer's mask: 0
[     6.212] (II) modeset(0): Supported detailed timing:
[     6.212] (II) modeset(0): clock: 76.0 MHz   Image Size:  293 x 165 mm
[     6.212] (II) modeset(0): h_active: 1366  h_sync: 1406  h_sync_end 1484 h_blank_end 1578 h_border: 0
[     6.212] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 783 v_blanking: 803 v_border: 0
[     6.213] (II) modeset(0):  InfoVision
[     6.213] (II) modeset(0):  M133NWN1 R4
[     6.213] (II) modeset(0): EDID (in hex):
[     6.213] (II) modeset(0): 	00ffffffffffff0026cf330500000000
[     6.213] (II) modeset(0): 	00180104951d11780a12309156539228
[     6.213] (II) modeset(0): 	1e505400000001010101010101010101
[     6.213] (II) modeset(0): 	010101010101b31d56d450002330284e
[     6.213] (II) modeset(0): 	3c0025a5100000190000000000000000
[     6.213] (II) modeset(0): 	00000000000000000000000000fe0049
[     6.213] (II) modeset(0): 	6e666f566973696f6e0a2020000000fe
[     6.213] (II) modeset(0): 	004d3133334e574e31205234200a000b
[     6.213] (II) modeset(0): Printing probed modes for output eDP-1
[     6.213] (II) modeset(0): Modeline "1366x768"x60.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[     6.213] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     6.213] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     6.213] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     6.213] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     6.213] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     6.213] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     6.213] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     6.213] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     6.213] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     6.213] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     6.213] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     6.213] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     6.213] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     6.213] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     6.213] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     6.213] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     6.213] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     6.213] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     6.213] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     6.213] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     6.213] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     6.213] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     6.213] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     6.213] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     6.213] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     6.213] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     6.213] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     6.213] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     6.213] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     6.213] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     6.213] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     6.213] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     6.213] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     6.213] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     6.213] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     6.213] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     6.213] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     6.213] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     6.213] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     6.213] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     6.213] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     6.213] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     6.213] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     6.213] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     6.213] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     6.213] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     6.213] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     6.213] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     6.213] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     6.213] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     6.213] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     6.213] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     6.213] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     6.213] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     6.213] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     6.213] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     6.213] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     6.213] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     6.213] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     6.213] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     6.213] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     6.213] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     6.213] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     6.213] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     6.213] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     6.213] (II) modeset(0): EDID for output DP-1
[     6.215] (II) modeset(0): EDID for output HDMI-1
[     6.215] (II) modeset(0): Output eDP-1 connected
[     6.215] (II) modeset(0): Output DP-1 disconnected
[     6.215] (II) modeset(0): Output HDMI-1 disconnected
[     6.215] (II) modeset(0): Using exact sizes for initial modes
[     6.215] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[     6.215] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.215] (==) modeset(0): DPI set to (96, 96)
[     6.215] (II) Loading sub module "fb"
[     6.215] (II) LoadModule: "fb"
[     6.215] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.215] (II) Module fb: vendor="X.Org Foundation"
[     6.215] 	compiled for 1.19.6, module version = 1.0.0
[     6.215] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.215] (II) UnloadModule: "fbdev"
[     6.215] (II) Unloading fbdev
[     6.215] (II) UnloadSubModule: "fbdevhw"
[     6.215] (II) Unloading fbdevhw
[     6.215] (II) UnloadModule: "vesa"
[     6.215] (II) Unloading vesa
[     6.215] (==) Depth 24 pixmap format is 32 bpp
[     6.219] (==) modeset(0): Backing store enabled
[     6.219] (==) modeset(0): Silken mouse enabled
[     6.219] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.259] (==) modeset(0): DPMS enabled
[     6.259] (II) modeset(0): [DRI2] Setup complete
[     6.259] (II) modeset(0): [DRI2]   DRI driver: i965
[     6.259] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     6.259] (--) RandR disabled
[     6.263] (II) SELinux: Disabled on system
[     6.269] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     6.269] (II) AIGLX: enabled GLX_ARB_create_context
[     6.269] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     6.269] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     6.269] (II) AIGLX: enabled GLX_INTEL_swap_event
[     6.269] (II) AIGLX: enabled GLX_SGI_swap_control
[     6.269] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     6.269] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     6.269] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     6.269] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     6.269] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     6.269] (II) AIGLX: Loaded and initialized i965
[     6.269] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.272] (II) modeset(0): Damage tracking initialized
[     6.272] (II) modeset(0): Setting screen physical size to 361 x 203
[     6.323] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.323] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.323] (II) LoadModule: "libinput"
[     6.323] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.327] (II) Module libinput: vendor="X.Org Foundation"
[     6.327] 	compiled for 1.19.6, module version = 0.27.1
[     6.327] 	Module class: X.Org XInput Driver
[     6.327] 	ABI class: X.Org XInput driver, version 24.1
[     6.327] (II) Using input driver 'libinput' for 'Power Button'
[     6.327] (**) Power Button: always reports core events
[     6.327] (**) Option "Device" "/dev/input/event2"
[     6.328] (**) Option "_source" "server/udev"
[     6.328] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.328] (II) event2  - Power Button: device is a keyboard
[     6.328] (II) event2  - Power Button: device removed
[     6.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.336] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.336] (**) Option "xkb_model" "pc105"
[     6.336] (**) Option "xkb_layout" "es"
[     6.366] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.366] (II) event2  - Power Button: device is a keyboard
[     6.367] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     6.367] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.367] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.367] (II) Using input driver 'libinput' for 'Video Bus'
[     6.367] (**) Video Bus: always reports core events
[     6.367] (**) Option "Device" "/dev/input/event4"
[     6.367] (**) Option "_source" "server/udev"
[     6.367] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     6.367] (II) event4  - Video Bus: device is a keyboard
[     6.367] (II) event4  - Video Bus: device removed
[     6.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[     6.392] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.392] (**) Option "xkb_model" "pc105"
[     6.392] (**) Option "xkb_layout" "es"
[     6.393] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     6.393] (II) event4  - Video Bus: device is a keyboard
[     6.395] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     6.395] (II) No input driver specified, ignoring this device.
[     6.395] (II) This device may have been added with another device file.
[     6.396] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.396] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.396] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.396] (II) Using input driver 'libinput' for 'Power Button'
[     6.396] (**) Power Button: always reports core events
[     6.396] (**) Option "Device" "/dev/input/event1"
[     6.396] (**) Option "_source" "server/udev"
[     6.396] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.396] (II) event1  - Power Button: device is a keyboard
[     6.396] (II) event1  - Power Button: device removed
[     6.424] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.424] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.424] (**) Option "xkb_model" "pc105"
[     6.424] (**) Option "xkb_layout" "es"
[     6.425] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.425] (II) event1  - Power Button: device is a keyboard
[     6.427] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[     6.427] (II) No input driver specified, ignoring this device.
[     6.427] (II) This device may have been added with another device file.
[     6.427] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event10)
[     6.428] (II) No input driver specified, ignoring this device.
[     6.428] (II) This device may have been added with another device file.
[     6.428] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event11)
[     6.428] (II) No input driver specified, ignoring this device.
[     6.428] (II) This device may have been added with another device file.
[     6.429] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event12)
[     6.429] (II) No input driver specified, ignoring this device.
[     6.429] (II) This device may have been added with another device file.
[     6.430] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[     6.430] (II) No input driver specified, ignoring this device.
[     6.430] (II) This device may have been added with another device file.
[     6.431] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event7)
[     6.431] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "evdev keyboard catchall"
[     6.431] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[     6.431] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[     6.431] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[     6.431] (**) Option "Device" "/dev/input/event7"
[     6.432] (**) Option "_source" "server/udev"
[     6.432] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[     6.432] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[     6.432] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device removed
[     6.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input8/event7"
[     6.480] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 9)
[     6.480] (**) Option "xkb_model" "pc105"
[     6.480] (**) Option "xkb_layout" "es"
[     6.481] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[     6.481] (II) event7  - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[     6.482] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[     6.482] (II) No input driver specified, ignoring this device.
[     6.482] (II) This device may have been added with another device file.
[     6.483] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[     6.483] (II) No input driver specified, ignoring this device.
[     6.483] (II) This device may have been added with another device file.
[     6.484] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[     6.484] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[     6.484] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[     6.484] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[     6.484] (**) Ideapad extra buttons: always reports core events
[     6.484] (**) Option "Device" "/dev/input/event6"
[     6.485] (**) Option "_source" "server/udev"
[     6.486] (II) event6  - Ideapad extra buttons: is tagged by udev as: Keyboard
[     6.486] (II) event6  - Ideapad extra buttons: device is a keyboard
[     6.486] (II) event6  - Ideapad extra buttons: device removed
[     6.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7/event6"
[     6.504] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 10)
[     6.504] (**) Option "xkb_model" "pc105"
[     6.504] (**) Option "xkb_layout" "es"
[     6.505] (II) event6  - Ideapad extra buttons: is tagged by udev as: Keyboard
[     6.506] (II) event6  - Ideapad extra buttons: device is a keyboard
[     6.507] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     6.507] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.507] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.507] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.507] (**) AT Translated Set 2 keyboard: always reports core events
[     6.507] (**) Option "Device" "/dev/input/event3"
[     6.507] (**) Option "_source" "server/udev"
[     6.508] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.508] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     6.508] (II) event3  - AT Translated Set 2 keyboard: device removed
[     6.532] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     6.532] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     6.532] (**) Option "xkb_model" "pc105"
[     6.532] (**) Option "xkb_layout" "es"
[     6.532] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.532] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     6.533] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[     6.533] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     6.533] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.533] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     6.533] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     6.533] (II) LoadModule: "synaptics"
[     6.533] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     6.534] (II) Module synaptics: vendor="X.Org Foundation"
[     6.534] 	compiled for 1.19.3, module version = 1.9.0
[     6.534] 	Module class: X.Org XInput Driver
[     6.534] 	ABI class: X.Org XInput driver, version 24.1
[     6.534] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     6.534] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.534] (**) Option "Device" "/dev/input/event5"
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1314 - 5670 (res 44)
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1098 - 4794 (res 76)
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     6.592] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     6.592] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.628] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[     6.628] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     6.628] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     6.628] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     6.628] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[     6.629] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     6.629] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     6.629] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     6.629] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     6.629] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     6.630] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     6.630] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    10.094] (II) modeset(0): EDID vendor "IVO", prod id 1331
[    10.094] (II) modeset(0): Printing DDC gathered Modelines:
[    10.094] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[    10.697] (II) modeset(0): EDID vendor "IVO", prod id 1331
[    10.697] (II) modeset(0): Printing DDC gathered Modelines:
[    10.697] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[    10.700] (II) modeset(0): EDID vendor "IVO", prod id 1331
[    10.700] (II) modeset(0): Printing DDC gathered Modelines:
[    10.700] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[    10.714] (II) modeset(0): EDID vendor "IVO", prod id 1331
[    10.714] (II) modeset(0): Printing DDC gathered Modelines:
[    10.714] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[    10.965] (II) modeset(0): EDID vendor "IVO", prod id 1331
[    10.965] (II) modeset(0): Printing DDC gathered Modelines:
[    10.965] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[    11.213] (II) modeset(0): EDID vendor "IVO", prod id 1331
[    11.213] (II) modeset(0): Printing DDC gathered Modelines:
[    11.213] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[   399.508] (II) modeset(0): EDID vendor "IVO", prod id 1331
[   399.508] (II) modeset(0): Printing DDC gathered Modelines:
[   399.508] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[   399.513] (II) modeset(0): EDID vendor "IVO", prod id 1331
[   399.513] (II) modeset(0): Printing DDC gathered Modelines:
[   399.513] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[   401.880] (II) modeset(0): EDID vendor "IVO", prod id 1331
[   401.880] (II) modeset(0): Printing DDC gathered Modelines:
[   401.880] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.642] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.643] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.644] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.645] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.645] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.645] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.645] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.645] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  1360.645] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[  1360.681] (II) UnloadModule: "synaptics"
[  1366.501] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  1366.501] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1366.580] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[  1366.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1366.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[  1366.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1366.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  1366.580] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1366.580] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1366.580] (**) Option "Device" "/dev/input/event5"
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1314 - 5670 (res 44)
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1098 - 4794 (res 76)
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1366.624] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1366.624] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1366.668] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input19/event5"
[  1366.668] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[  1366.668] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1366.668] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  1366.668] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[  1366.671] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1366.671] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1366.671] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1366.671] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1366.671] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2519.142] (II) modeset(0): EDID vendor "IVO", prod id 1331
[  2519.143] (II) modeset(0): Printing DDC gathered Modelines:
[  2519.143] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[  2519.148] (II) modeset(0): EDID vendor "IVO", prod id 1331
[  2519.148] (II) modeset(0): Printing DDC gathered Modelines:
[  2519.148] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[  2521.688] (II) modeset(0): EDID vendor "IVO", prod id 1331
[  2521.688] (II) modeset(0): Printing DDC gathered Modelines:
[  2521.688] (II) modeset(0): Modeline "1366x768"x0.0   76.03  1366 1406 1484 1578  768 771 783 803 -hsync -vsync (48.2 kHz eP)
[  2523.912] (EE) SynPS/2 Synaptics TouchPad: Read error 19
[  2523.912] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[  2523.943] (II) UnloadModule: "synaptics"
[  2547.931] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  2547.931] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  2547.995] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[  2547.995] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  2547.995] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[  2547.995] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  2547.995] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  2547.995] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  2547.995] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  2547.995] (**) Option "Device" "/dev/input/event5"
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1314 - 5670 (res 44)
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1098 - 4794 (res 76)
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  2548.036] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2548.036] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  2548.076] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input23/event5"
[  2548.076] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[  2548.076] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  2548.076] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  2548.076] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[  2548.079] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  2548.079] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  2548.079] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  2548.079] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  2548.079] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Fri Apr 19, 2019 12:57 pm

Please help. I am really desperated with this issue.
If I can provide with any log that could help to solve ir, please ask me.
Thank you very much :-)

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Mon Apr 29, 2019 3:20 am

Please help.
At least, could anybody say me where to post this issue? Where can I find any help?
Thanks :-)

griennehornette
Level 1
Level 1
Posts: 2
Joined: Sat Mar 16, 2019 6:48 pm

Re: Cursor freeze on Mint 19

Post by griennehornette » Fri May 03, 2019 1:20 pm

I am experiencing similar problems on an Acer Aspire 1, with Mint 19.1 and kernel 4.15.0-20-generic. Based on posts above, I experimented with function combinations, and looks like Fn+F6 turns on and off for me. Next time my cursor freezes after suspending, I'll try Fn_F6 a few times, and see what happens.

griennehornette
Level 1
Level 1
Posts: 2
Joined: Sat Mar 16, 2019 6:48 pm

Re: Cursor freeze on Mint 19

Post by griennehornette » Sat May 04, 2019 4:15 pm

I am almost disappointed that there has been no cursor freezing since I posted. Perhaps recent updates have solved the problem... (?)

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Thu May 09, 2019 11:19 am

That's what I thought after an update of the system (which included idev) but was only a question of time and now I have to depend on an external mouse because most of the time fails since boot.
Maybe this is not the place to post this issues but at least I would thank if anybody could tell me the place to explain the issue in order to fix it and improve the code.
Thank you very much :-)

Axfinger
Level 1
Level 1
Posts: 10
Joined: Mon May 13, 2019 4:37 pm

Re: Cursor freeze on Mint 19

Post by Axfinger » Thu May 16, 2019 12:56 am

I have had these issues and tried posting them in a couple of spots on the forums before finding this, and so far no one has replied at all. I seem to be able to trigger this problem at will now by simply making a left-click with the touchpad. Suspend, Restart, or Shut-down and Reboot all work to unfreeze, until I left-click again and cause it to freeze. USB mouse still works so I can at least use my laptop. My information:

Lenovo 2nd Gen X1 Carbon running 19.1 Tessa Xfce.
Running Kernel 4.15.0-48-generic and Xfce 4.12.3.
When I type in grep -iA2 touchpad /proc/bus/input/devices I get the response:
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5

I have tried switching synaptics to libinput but to no avail.

Any help would be greatly appreciated.

Kok0
Level 1
Level 1
Posts: 7
Joined: Mon Apr 15, 2019 5:07 pm

Re: Cursor freeze on Mint 19

Post by Kok0 » Thu May 16, 2019 3:43 am

my device: grep -iA2 touchpad /proc/bus/input/devices

N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input21

I still have to travel everywhere with an external mouse. Now, most of the times that I boot, the touchpad doesn't work. I can revive it disabling and enabling it several times (till 10 times or more) with Fn+F6
I need a solution!! Please help! :-/
Thanks and regards :-)

User avatar
karlchen
Level 20
Level 20
Posts: 11528
Joined: Sat Dec 31, 2011 7:21 am
Location: Germany

Re: Cursor freeze on Mint 19

Post by karlchen » Thu May 16, 2019 7:53 am

Hello Kok0.

As Mint is based on Ubuntu, I suggest visiting the Ubuntu forums in order to find out whether someone posted the same touchpad problem there and whether a solution has been found. A similar good place to visit is Askubuntu.
Sorry. But this is the smartest piece of advice which I can give.

Cheers
Karl
Image
Linux Mint 19.2 64-bit Cinnamon, Total Commander 9.22a 64-bit
Haß gleicht einer Krankheit, dem Miserere, wo man vorne herausgibt, was eigentlich hinten wegsollte. (Goethe)

Post Reply

Return to “Hardware Support”