Duplex not working on Samsung CLX 6260FW

Forum rules
Before you post please read this
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Cannot print double- sided in LM 19.3 using Master PDF Editor nor scan both sides of document with the same app or using gscan2pdf. Able to do both in Windows 10.
Have tried doing same through USB connection as per a previous post but this made no difference.
This is frustrating as I have virtually moved from Win 10 to LM & this seems to be the last stumbling block to doing so.
Would appreciate any work rounds- Bruce
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

With the device on the network give what you get for

Code: Select all

avahi-browse -rt _ipp._tcp

Code: Select all

avahi-browse -rt _uscan._tcp
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Hi Brian, thanks for your response.
Output from fist command attached, no output for second command.
Bruce
Attachments
Selection_002.png
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

Thank you for the output, sunlover.

I forgot to ask whether you can do duplex printing from apps other than Master PDF Editor. You likely will be using the Samsung drivers for printing; let's try something different.

Run the command

Code: Select all

driverless
It should show a line corresponding your printer. The line is a URI (Unified Resource Identifier). Then do

Code: Select all

lpadmin -p PRINTER -E -v URI -m everywhere
Replace PRINTER by any name which you want to give to your print queue and URI by your printer's URI as listed by the driverless command.

Any joy?

The idea I had for testing scanning cannot be implemented because there isn't any _uscan._tcp service on the CLX 6260FW.
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Output from "driverless" command below Brian. Tried duplex printing from Libre Office, would not print at all as with trying to print single sheet now from F/fox?
I did install ULD Samsung driver some time ago.
Attachments
Selection_003.png
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

What you substitute for PRINTER is unimportant. I will use 6260. What you substitute for URI is crucial. The command becomes:

Code: Select all

lpadmin -p 6260 -E -v ipp://SEC8425198506AF.local:631/ipp/printer  -m everywhere
Then try printing to 6260.
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Output from latest command follows, printer "6260" added but unable to print to same. I am using wireless connection.
Bruce
Attachments
Selection_004.png
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

lpadmin says that it cannot set up a print queue because the URI being used is not known. There is a typo in the URI that you could have discovered yourself by comparing it with the URI given in the outputs of avahi-browse. The correct URI is

Code: Select all

ipp://SEC8425190506AF.local:631/ipp/printer
BTW, presenting information via screenshots is not very convenient in these circumstances. Extracting data from one to copy and paste is error-prone.
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Hi Brian,
Ran amended command, maybe I need new glasses, & tried to print to 6260 in Master PDF editor with duplex (long side) option selected. Would only print two pages one sided as before any changes made to printers.
As an exercise I have copied & pasted terminal output as suggested in other posts on the forum bought up with a search.

Code: Select all

bruce@bruce-MS-7982:~$ Test 12345678910

Am always willing to learn with a little patience & guidance.
Bruce
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

Would only print two pages one sided as before any changes made to printers.
The 6260 queue does not use ULD, so I suppose we can rule that software out. Please try:

Code: Select all

lp -d 6260 -P "1-5" -o sides=two-sided-long-edge /etc/services
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Hi Brian, Ran command (terminal output shown below) , 5 pages, single sided printed off. Have not included these at this time as I thought this was probably a test print.

Code: Select all

bruce@bruce-MS-7982:~$ lp -d 6260 -P "1-5" -o sides=two-sided-long-edge /etc/services
request id is 6260-38 (1 file(s))
bruce@bruce-MS-7982:~$ 
Bruce
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

...5 pages, single sided printed off.
This is becoming more perplexing. The result would indicate a fault with the filtering on your printing system. I have attached a file, out.txt, that I produced on my Mint 19.1 installation. It is two pages with one line per page (to conserve supplies). It is a printer-ready file. That is, all the filtering was done at this end. Send it to your printer with

Code: Select all

lp -d 6260 -o raw -o sides=two-sided-long-edge out.txt
Does this print in duplex?

(out.txt is not a text file but an Apple Raster file, but I needed the .txt extension to be able to attach it).
--
Brian.
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

Nearly forgot!
Attachments
out.txt
(13.67 KiB) Downloaded 13 times
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Same result as previous Brian, printed out 2 single sided pages.
I am still dual booted with Win 10, so if you would like to take a break & think over it for a while is OK with me- Bruce
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

Thank you for your consideration, Bruce. I am in the process of exhausting my skill set!

We are both using essentially the same set of filters. We print the same file in the same way. Mine is a single duplexed sheet. Yours is not. JFTR, would you post

Code: Select all

lpoptions -p 6260 -l
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Output follows, interestingly Duplex/2-Sided Printing shown as option?

Code: Select all

bruce@bruce-MS-7982:~$ lpoptions -p 6260 -l
PageSize/Media Size: Letter Legal *A4 Executive B5 ISOB5 Env10 EnvMonarch EnvDL EnvC5 Folio A5 Statement A6 92x143mm 217x357mm
InputSlot/Media Source: *Tray1 Auto
MediaType/Media Type: *Stationery StationeryHeavyweight Cardstock Letterhead
ColorModel/Color Mode: Gray *RGB
Duplex/2-Sided Printing: *None DuplexNoTumble DuplexTumble
cupsPrintQuality/Print Quality: Draft *Normal
bruce@bruce-MS-7982:~$ 
Bruce
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

Output follows, interestingly Duplex/2-Sided Printing shown as option?
That's ok. When the PPD is used with the filtering system (neither is used with -o raw) Duplex/2-Sided is translated to sides=two-sided-long-edge. My problem in understanding is that sides= does not appear to be acted on by the Samsung.

Anyway, I sought some assistance at https://github.com/OpenPrinting/cups-filters/issues/202. There is a reply. Could we get the information suggested in the second post. That is, an attrs.txt using ipptool. attrs.txt is better sent here as an attachment.
--
Brian.
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

Could we get the information suggested in the second post. That is, an attrs.txt using ipptool. attrs.txt is better sent here as an attachment.
There is a typo in get-printer-attributes.txt. Change it to get-printer-attributes.test
--
Brian.
sunlover
Level 1
Level 1
Posts: 14
Joined: Wed Jan 08, 2020 7:27 pm

Re: Duplex not working on Samsung CLX 6260FW

Post by sunlover »

Hi Brian,
Tried commands as suggested in second post, output follows. This is stretching my knowledge, which is OK, not sure if my input for URI is correct?

Code: Select all

bruce@bruce-MS-7982:~$ driverless
ipp://SEC8425190506AF.local:631/ipp/printer
bruce@bruce-MS-7982:~$ ipptool -tv ipp://SEC8425190506AF.local:631/ipp/printer get-printer-attributes-2.0.test > attrs.txt
ipptool: Unable to open test file get-printer-attributes-2.0.test - No such file or directory
bruce@bruce-MS-7982:~$ ipptool -tv ipp://SEC8425190506AF.local:631/ipp/printer get-printer-attributes.test > attrs.txt
bruce@bruce-MS-7982:~$ 
cheers Bruce
brian_p
Level 6
Level 6
Posts: 1368
Joined: Thu Jan 17, 2019 9:20 am

Re: Duplex not working on Samsung CLX 6260FW

Post by brian_p »

sunlover wrote:
Tue Feb 18, 2020 1:45 am

bruce@bruce-MS-7982:~$ ipptool -tv ipp://SEC8425190506AF.local:631/ipp/printer get-printer-attributes.test > attrs.txt
bruce@bruce-MS-7982:~$
You are doing ok, Bruce.

This command has completed successfully. The output has gone to the file attrs.txt and not to the screen. The file needs to be sent here. When you reply you see Save draft/Preview/Submit buttons. Below that there is an Attachments tab. Click on it to select attrs.txt to attach. It will show up in the preview.
--
Brian.
Post Reply

Return to “Printers & Scanners”