[Résolu] Cinnamon se fige (19.3)

Forum de support pour les utilisateurs francophones

Moderator: Laurent85

Forum rules
Topics in this forum are automatically closed 6 months after creation.
Locked
bop

[Résolu] Cinnamon se fige (19.3)

Post by bop »

Bonjour,
Depuis quelques semaines, mon ordinateur se fige aléatoirement, mais de plus en plus fréquement. La fenêtre dans laquelle je travaille se fige, puis très rapidement les autres. En général la souris bouge toujours, mais aucune sollicitation n'abouti. En général, cette situation est juste précédée d'une activité intense du processeur (>60%) sans raison apparente. Au bout d'un moment l'écran devient noir avec le curseur fixe en haut à gauche. Des erreurs d'entrée/sortie sont quelquefois signalées. J'ai pensé que ce pouvait être un problème avec mon SSD (7ans) qui contient le système, mais mes tests ne montrent pas d'erreur d'écriture/lecture, et les smart sont ok.
J'ai essayé de voir dans le syslog si je trouvais quelque chose, mais je suis en fait incapable d'interpreter ce qui y figure.

Si quelqu'un a une piste à me faire suivre pour avancer, je suis preneur.

Merci d'avance de votre aide
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Laurent85
Level 17
Level 17
Posts: 7081
Joined: Tue May 26, 2015 10:11 am

Re: Cinnamon se fige (19.3)

Post by Laurent85 »

Bonjour,
Quel est le retour des commandes :

Code: Select all

inxi -Fxxz
journalctl --since yesterday --priority=3 --no-pager | tail --lines=40
Image
bop

Re: Cinnamon se fige (19.3)

Post by bop »

Bonjour et merci pour la réponse.

Voici:

Code: Select all

 ~ $ inxi -Fxxz
System:    Host: bop-PC Kernel: 4.15.0-101-generic x86_64 bits: 64 compiler: gcc v: 7.5.0 Desktop: Cinnamon 4.4.8 wm: muffin 
           dm: LightDM Distro: Linux Mint 19.3 Tricia base: Ubuntu 18.04 bionic 
Machine:   Type: Desktop Mobo: ASUSTeK model: P6T DELUXE V2 v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 1202 
           date: 12/22/2010 
CPU:       Topology: Quad Core model: Intel Core i7 950 bits: 64 type: MT MCP arch: Nehalem rev: 5 L2 cache: 8192 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 49180 
           Speed: 1604 MHz min/max: 1600/3068 MHz Core speeds (MHz): 1: 1604 2: 1604 3: 1604 4: 1604 5: 1604 6: 1604 7: 1604 
           8: 1604 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] Cypress XT [Radeon HD 5870] driver: radeon v: kernel bus ID: 02:00.0 
           chip ID: 1002:6898 
           Display: x11 server: X.Org 1.19.6 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD CYPRESS (DRM 2.50.0 / 4.15.0-101-generic LLVM 9.0.0) v: 4.3 Mesa 19.2.8 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Intel 82801JI HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3a3e 
           Device-2: AMD Cypress HDMI Audio [Radeon HD 5830/5850/5870 / 6850/6870 Rebrand] driver: snd_hda_intel v: kernel 
           bus ID: 02:00.1 chip ID: 1002:aa50 
           Sound Server: ALSA v: k4.15.0-101-generic 
Network:   Device-1: Marvell 88E8056 PCI-E Gigabit Ethernet vendor: ASUSTeK driver: sky2 v: 1.30 port: b800 bus ID: 0a:00.0 
           chip ID: 11ab:4364 
           IF: enp10s0 state: down mac: <filter> 
           Device-2: Marvell 88E8056 PCI-E Gigabit Ethernet vendor: ASUSTeK driver: sky2 v: 1.30 port: d800 bus ID: 0c:00.0 
           chip ID: 11ab:4364 
           IF: enp12s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 7.50 TiB used: 1.80 TiB (24.0%) 
           ID-1: /dev/sda vendor: Western Digital model: WD1001FALS-00J7B1 size: 931.51 GiB speed: 3.0 Gb/s serial: <filter> 
           ID-2: /dev/sdb vendor: Western Digital model: WD1001FALS-00J7B0 size: 931.51 GiB speed: 3.0 Gb/s serial: <filter> 
           ID-3: /dev/sdc vendor: Western Digital model: WD10EADS-00P8B0 size: 931.51 GiB speed: 3.0 Gb/s serial: <filter> 
           ID-4: /dev/sdd vendor: Toshiba model: HDWE150 size: 4.55 TiB speed: 6.0 Gb/s serial: <filter> 
           ID-5: /dev/sde model: MXSSD3MDSTP-240G size: 223.57 GiB speed: 6.0 Gb/s serial: <filter> 
Partition: ID-1: / size: 219.94 GiB used: 19.40 GiB (8.8%) fs: ext4 dev: /dev/sde1 
           ID-2: /home size: 2.24 TiB used: 1.72 TiB (76.8%) fs: ext4 dev: /dev/sdd1 
           ID-3: swap-1 size: 12.09 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdd3 
Sensors:   System Temperatures: cpu: 45.0 C mobo: N/A gpu: radeon temp: 38 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 257 Uptime: 44m Memory: 11.72 GiB used: 1.67 GiB (14.2%) Init: systemd v: 237 runlevel: 5 default: 2 
           Compilers: gcc: 7.5.0 alt: 5/7 Shell: bash v: 4.4.20 running in: gnome-terminal inxi: 3.0.32 

Code: Select all

journalctl --since yesterday --priority=3 --no-pager | tail --lines=40
mai 21 18:33:37 bop-PC kernel: ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch
mai 21 18:33:37 bop-PC blkmapd[459]: open pipe file /run/rpc_pipefs/nfs/blocklayout failed: No such file or directory
mai 21 18:33:37 bop-PC systemd-modules-load[423]: Failed to find module 'piix'
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc0183, key code 226): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1005, key code 212): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc101f, key code 108): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1020, key code 103): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1041, key code 421): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1042, key code 423): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1043, key code 397): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1044, key code 149): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1045, key code 202): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1046, key code 203): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1048, key code 430): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104a, key code 136): Invalid argument
mai 21 18:33:37 bop-PC systemd-udevd[508]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104c, key code 162): Invalid argument
mai 21 18:33:39 bop-PC systemd-modules-load[847]: Failed to find module 'piix'
mai 21 18:33:39 bop-PC systemd[1]: Failed to start Load Kernel Modules.
mai 21 18:33:39 bop-PC nfsdcltrack[1140]: Failed to init database: -13
mai 21 18:33:40 bop-PC lightdm[1297]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 21 18:33:40 bop-PC lightdm[1297]: PAM adding faulty module: pam_kwallet.so
mai 21 18:33:40 bop-PC lightdm[1297]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 21 18:33:40 bop-PC lightdm[1297]: PAM adding faulty module: pam_kwallet5.so
mai 21 18:33:40 bop-PC systemd[1]: Failed to start Cgroup management daemon.
mai 21 18:33:41 bop-PC lightdm[1401]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 21 18:33:41 bop-PC lightdm[1401]: PAM adding faulty module: pam_kwallet.so
mai 21 18:33:41 bop-PC lightdm[1401]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 21 18:33:41 bop-PC lightdm[1401]: PAM adding faulty module: pam_kwallet5.so
mai 21 18:33:45 bop-PC systemd[1]: Failed to start CTDB.
mai 21 18:33:46 bop-PC ntpdate[1528]: the NTP socket is in use, exiting
mai 21 18:33:50 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 21 18:34:02 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 21 18:34:14 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 21 18:41:10 bop-PC pulseaudio[2612]: [pulseaudio] pid.c: Daemon already running.
mai 21 18:41:35 bop-PC pulseaudio[2515]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
mai 21 19:18:03 bop-PC sudo[5856]:      bop : a password is required ; TTY=pts/0 ; PWD=/home/bop ; USER=root ; COMMAND=/usr/sbin/hddtemp -nq -u C /dev/sda
mai 21 19:18:03 bop-PC sudo[5858]:      bop : a password is required ; TTY=pts/0 ; PWD=/home/bop ; USER=root ; COMMAND=/usr/sbin/hddtemp -nq -u C /dev/sdb
mai 21 19:18:03 bop-PC sudo[5860]:      bop : a password is required ; TTY=pts/0 ; PWD=/home/bop ; USER=root ; COMMAND=/usr/sbin/hddtemp -nq -u C /dev/sdc
mai 21 19:18:03 bop-PC sudo[5862]:      bop : a password is required ; TTY=pts/0 ; PWD=/home/bop ; USER=root ; COMMAND=/usr/sbin/hddtemp -nq -u C /dev/sdd
mai 21 19:18:03 bop-PC sudo[5864]:      bop : a password is required ; TTY=pts/0 ; PWD=/home/bop ; USER=root ; COMMAND=/usr/sbin/hddtemp -nq -u C /dev/sde
Le dernier plantage a eu lieu ce matin à 9:22. J'ai enregistré le syslog (2400 lignes), je ne sais si ça a un intérêt.
Last edited by bop on Thu May 21, 2020 3:03 pm, edited 1 time in total.
bop

Re: Cinnamon se fige (19.3)

Post by bop »

voici les lignes correspondant à l'horaire:

Code: Select all

mai 20 23:14:38 bop-PC blkmapd[458]: exit on signal(15)
-- Reboot --
mai 21 09:22:34 bop-PC kernel: ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch
mai 21 09:22:34 bop-PC blkmapd[455]: open pipe file /run/rpc_pipefs/nfs/blocklayout failed: No such file or directory
mai 21 09:22:34 bop-PC systemd-modules-load[428]: Failed to find module 'piix'
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc0183, key code 226): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1005, key code 212): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc101f, key code 108): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1020, key code 103): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1041, key code 421): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1042, key code 423): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1043, key code 397): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1044, key code 149): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1045, key code 202): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1046, key code 203): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1048, key code 430): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104a, key code 136): Invalid argument
mai 21 09:22:35 bop-PC systemd-udevd[498]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104c, key code 162): Invalid argument
mai 21 09:22:36 bop-PC systemd-modules-load[844]: Failed to find module 'piix'
mai 21 09:22:36 bop-PC systemd[1]: Failed to start Load Kernel Modules.
mai 21 09:22:36 bop-PC nfsdcltrack[1135]: Failed to init database: -13
mai 21 09:22:37 bop-PC systemd[1]: Failed to start Cgroup management daemon.
mai 21 09:22:37 bop-PC lightdm[1310]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 21 09:22:37 bop-PC lightdm[1310]: PAM adding faulty module: pam_kwallet.so
mai 21 09:22:37 bop-PC lightdm[1310]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 21 09:22:37 bop-PC lightdm[1310]: PAM adding faulty module: pam_kwallet5.so
mai 21 09:22:38 bop-PC lightdm[1414]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 21 09:22:38 bop-PC lightdm[1414]: PAM adding faulty module: pam_kwallet.so
mai 21 09:22:38 bop-PC lightdm[1414]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 21 09:22:38 bop-PC lightdm[1414]: PAM adding faulty module: pam_kwallet5.so
mai 21 09:22:42 bop-PC systemd[1]: Failed to start CTDB.
mai 21 09:22:47 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 21 09:22:49 bop-PC pulseaudio[1922]: [pulseaudio] pid.c: Daemon already running.
mai 21 09:22:59 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 21 09:23:11 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 21 09:23:14 bop-PC pulseaudio[1864]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
-- Reboot --
Last edited by bop on Thu May 21, 2020 3:01 pm, edited 1 time in total.
bop

Re: Cinnamon se fige (19.3)

Post by bop »

Dans fstab, j'ai ceci:
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
mais je n'ai pas de lecteur de disquette (à part un 1541 au grenier...)
Laurent85
Level 17
Level 17
Posts: 7081
Joined: Tue May 26, 2015 10:11 am

Re: Cinnamon se fige (19.3)

Post by Laurent85 »

bop wrote: Thu May 21, 2020 2:54 pm Dans fstab, j'ai ceci:
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
Enlève la ligne dans fstab, pour éditeur le fichier comme administrateur :

Code: Select all

xed admin:/etc/fstab
Une mise à jour semble avoir été interrompue. Entre ces commandes :

Code: Select all

sudo dpkg -configure -a
apt install -f
sudo update-initramfs -k all -u
sudo update-grub
Redémarre
Image
bop

Re: Cinnamon se fige (19.3)

Post by bop »

fstab, c'est fait.
Pour le reste , il ne semble pas qu'il ait changé quelque chose

Code: Select all

bop@bop-PC ~ $ sudo dpkg --configure -a
bop@bop-PC ~ $ apt install -f
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-headers-4.15.0-96 linux-headers-4.15.0-96-generic linux-image-4.15.0-96-generic linux-modules-4.15.0-96-generic
  linux-modules-extra-4.15.0-96-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 14 non mis à jour.
bop@bop-PC ~ $ sudo update-initramfs -k all -u
update-initramfs: Generating /boot/initrd.img-4.15.0-101-generic
Warning: No support for locale: fr_FR.utf8
update-initramfs: Generating /boot/initrd.img-4.15.0-99-generic
Warning: No support for locale: fr_FR.utf8
update-initramfs: Generating /boot/initrd.img-4.15.0-96-generic
Warning: No support for locale: fr_FR.utf8
bop@bop-PC ~ $ sudo update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/50_linuxmint.cfg'
Sourcing file `/etc/default/grub.d/60_mint-theme.cfg'
Création du fichier de configuration GRUB…
Thème trouvé : /boot/grub/themes/linuxmint/theme.txt
Image Linux trouvée : /boot/vmlinuz-4.15.0-101-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-101-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-99-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-99-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-96-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-96-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Windows 7 trouvé sur /dev/sdb1
Windows 7 trouvé sur /dev/sdb2
fait
Laurent85
Level 17
Level 17
Posts: 7081
Joined: Tue May 26, 2015 10:11 am

Re: Cinnamon se fige (19.3)

Post by Laurent85 »

Exécute aussi :

Code: Select all

apt autoremove --purge 
Et redémarre.

Il n'y avait pas de plantage avant ça ?
Image
bop

Re: Cinnamon se fige (19.3)

Post by bop »

Je n'ai pas souvenir de plantage autre que ce que j'ai décrit. Je n'en ai pas eu de nouveau depuis hier matin, mais la survenue était déjà totalement aléatoire. Pour l'instant, le seul changement est la suppression de l'entrée dans fstab. Je ne devrais déjà plus avoir les messages d'erreur d'I/O concernant fd0. Reste l'éventualité d'un problème hard encore furtif, sur une machine de 10ans (mais qui ne fait pas son âge).
Je vais voir si ça se reproduit. Vu l'augmentation de la fréquence du problème ces derniers temps, je devrais être fixé dans les prochains jours.

Merci en tout cas pour le temps consacré
bop

Re: Cinnamon se fige (19.3)

Post by bop »

Nouveau plantage ce matin. Mêmes symptomes.
Quand l'écran s'est figé, j'ai remarqué que la pendule avait 2 h de retard.

Le journalctl:

Code: Select all

-- Reboot --
mai 23 09:20:23 bop-PC kernel: ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch
mai 23 09:20:23 bop-PC blkmapd[454]: open pipe file /run/rpc_pipefs/nfs/blocklayout failed: No such file or directory
mai 23 09:20:23 bop-PC systemd-modules-load[440]: Failed to find module 'piix'
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc0183, key code 226): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1005, key code 212): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc101f, key code 108): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1020, key code 103): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1041, key code 421): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1042, key code 423): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1043, key code 397): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1044, key code 149): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1045, key code 202): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1046, key code 203): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1048, key code 430): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104a, key code 136): Invalid argument
mai 23 09:20:23 bop-PC systemd-udevd[501]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104c, key code 162): Invalid argument
mai 23 09:20:24 bop-PC systemd-modules-load[858]: Failed to find module 'piix'
mai 23 09:20:24 bop-PC systemd[1]: Failed to start Load Kernel Modules.
mai 23 09:20:25 bop-PC nfsdcltrack[1133]: Failed to init database: -13
mai 23 09:20:26 bop-PC systemd[1]: Failed to start Cgroup management daemon.
mai 23 09:20:26 bop-PC lightdm[1307]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 23 09:20:26 bop-PC lightdm[1307]: PAM adding faulty module: pam_kwallet.so
mai 23 09:20:26 bop-PC lightdm[1307]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 23 09:20:26 bop-PC lightdm[1307]: PAM adding faulty module: pam_kwallet5.so
mai 23 09:20:26 bop-PC lightdm[1411]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 23 09:20:26 bop-PC lightdm[1411]: PAM adding faulty module: pam_kwallet.so
mai 23 09:20:26 bop-PC lightdm[1411]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 23 09:20:26 bop-PC lightdm[1411]: PAM adding faulty module: pam_kwallet5.so
mai 23 09:20:31 bop-PC systemd[1]: Failed to start CTDB.
mai 23 09:20:31 bop-PC ntpdate[1559]: the NTP socket is in use, exiting
mai 23 09:20:35 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 23 09:20:40 bop-PC pulseaudio[2212]: [pulseaudio] pid.c: Daemon already running.
mai 23 09:20:47 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 23 09:20:59 bop-PC kernel: print_req_error: I/O error, dev fd0, sector 0
mai 23 09:21:05 bop-PC pulseaudio[2107]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
-- Reboot --
Le journal depuis le redémarrage comporte les mêmes lignes sauf les 2 lignes:
"kernel: print_req_error: I/O error, dev fd0, sector 0"
La suppression de l'entrée dans fstab n'empêche apparemment pas le problème de se reproduire
Laurent85
Level 17
Level 17
Posts: 7081
Joined: Tue May 26, 2015 10:11 am

Re: Cinnamon se fige (19.3)

Post by Laurent85 »

bop wrote: Sat May 23, 2020 4:13 am Le journal depuis le redémarrage comporte les mêmes lignes sauf les 2 lignes:
"kernel: print_req_error: I/O error, dev fd0, sector 0"
La suppression de l'entrée dans fstab n'empêche apparemment pas le problème de se reproduire
Linux croit qu'il y a un lecteur de disquette et ne le trouve pas mais cette erreur n'est pas bloquante.
Sinon en fait il n'y a rien dans les logs qui peut mettre sur une piste. C'est difficile à diagnostiquer dans cette situation, et une défaillance matérielle n'est pas exclue.

!quand le plantage se produit est-ce qu'il est toujours possible de basculer sur une console avec la combinaison de touche Ctrl-Alt-F2 par exemple.

Ctrl-Alt-F1 à F7 pour basculer entre les différentes console et l'interface graphique.
Image
bop

Re: Cinnamon se fige (19.3)

Post by bop »

Alors, pour répondre à la question, Ctrl-Alt-F2 fonctionne si je le fait tout de suite, mais l'écran reste ensuite dessus sans possibilité de contrôle.
Par contre, cela m'a permis de trouver le problème, car les erreurs défilent dans la console. Et ces erreurs désignaient clairement une carte passerelle Pcie /SATA III + usb3. Comme les pannes étaient plutôt moins fréquentes à chaud, j'ai penché pour un problème de contacts plutôt que de composant.
J'ai démonté, nettoyé, brossé et remonté. Depuis, plus de freeze.
Merci pour la combinaison de touche.
Donc, problème matériel (contacts sur connecteur pcie) (résolu)
Locked

Return to “Français - French”