run the command inxi -Fxxxrz and this is the result :
Code: Select all
alejandro@alejandro-desktop:~$ inxi -Fxxxrz
System:
Host: alejandro-desktop Kernel: 4.15.0-108-generic i686 bits: 32
compiler: gcc v: 7.5.0 Desktop: MATE 1.20.1 info: mate-panel
wm: marco 1.20.1 dm: LightDM 1.26.0 Distro: Linux Mint 19.1 Tessa
base: Ubuntu 18.04 bionic
Machine:
Type: Desktop Mobo: Gigabyte model: 8I945G v: x.x serial: <filter>
BIOS: Award v: F6 date: 01/04/2006
CPU:
Topology: Dual Core model: Intel Pentium D bits: 64 type: MCP
arch: Netburst Presler rev: 5 L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 bogomips: 13665
Speed: 2400 MHz min/max: 2400/3400 MHz Core speeds (MHz): 1: 2400 2: 2400
Graphics:
Device-1: NVIDIA G98 [GeForce 8400 GS Rev. 2] vendor: XFX Pine
driver: nvidia v: 340.108 bus ID: 01:00.0 chip ID: 10de:06e4
Display: x11 server: X.Org 1.19.6 driver: nvidia
unloaded: fbdev,modesetting,nouveau,vesa compositor: marco v: 1.20.1
resolution: 1280x1024~60Hz
OpenGL: renderer: GeForce 8400 GS/PCIe/SSE2 v: 3.3.0 NVIDIA 340.108
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio
vendor: Gigabyte GA-8I945PG-RH Mainboard driver: snd_hda_intel v: kernel
bus ID: 00:1b.0 chip ID: 8086:27d8
Sound Server: ALSA v: k4.15.0-108-generic
Network:
Device-1: Broadcom and subsidiaries NetLink BCM5789 Gigabit Ethernet PCI
Express
vendor: Gigabyte driver: tg3 v: 3.137 port: 8000 bus ID: 03:00.0
chip ID: 14e4:169d
IF: enp3s0 state: down mac: <filter>
Device-2: VIA VT6105/VT6106S [Rhine-III]
vendor: D-Link System DFE-520TX Fast PCI driver: via-rhine v: N/A
port: 9000 bus ID: 04:00.0 chip ID: 1106:3106
IF: enp4s0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.28 TiB used: 1.09 TiB (84.6%)
ID-1: /dev/sda vendor: Seagate model: ST3160215A size: 149.05 GiB
speed: <unknown> serial: <filter> rev: D scheme: MBR
ID-2: /dev/sdb vendor: Maxtor model: 6L250R0 size: 233.76 GiB
speed: <unknown> serial: <filter> rev: 1G10 scheme: MBR
ID-3: /dev/sdc type: USB vendor: Toshiba model: External USB 3.0
size: 931.51 GiB serial: <filter> rev: 5438 scheme: MBR
RAID:
Hardware-1: Integrated Express IT8212 Dual channel ATA RAID controller
driver: pata_it821x v: 0.4.2 port: ac00 bus ID: 04:06.0 chip ID: 1283.8212
rev: 13
Partition:
ID-1: / size: 145.71 GiB used: 95.24 GiB (65.4%) fs: ext4 dev: /dev/sda1
Sensors:
Message: No sensors data was found. Is sensors configured?
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com tessa main upstream import backport
2: deb http://archive.ubuntu.com/ubuntu bionic main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu bionic-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ bionic partner
Info:
Processes: 148 Uptime: 22m Memory: 3.14 GiB used: 556.5 MiB (17.3%)
Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 alt: 7 Shell: bash
v: 4.4.20 running in: mate-terminal inxi: 3.0.27
alejandro@alejandro-desktop:~$
Is necessary an driver specifically to Linux to install? Where I get one? or how can make it work? ,
Waiting for your kindly answers .