The RAID consists of 2 x 2TB drives containing my documents. Linux (the only OS) is on a separate SSD, and there are a couple of additional drives operating as stand-alone storage.
Here's what I hope is the relevant section of the Terminal messages. Can anyone help with a way to address the error messages and complete the upgrade?
Code: Select all
Setting up mdadm (4.1-5ubuntu1.2) ...
dpkg: error processing package mdadm (--configure):
installed mdadm package post-installation script subprocess returned error exit status 20
Errors were encountered while processing:
mdadm
E: Sub-process /usr/bin/dpkg returned an error code (1)
Error - Return code: 100
Error detected on try #5...
dpkg --configure -a
Setting up mdadm (4.1-5ubuntu1.2) ...
dpkg: error processing package mdadm (--configure):
installed mdadm package post-installation script subprocess returned error exit status 20
Errors were encountered while processing:
mdadm
Error - Return code: 1
DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical apt-get install -fyq
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 1600 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up mdadm (4.1-5ubuntu1.2) ...
dpkg: error processing package mdadm (--configure):
installed mdadm package post-installation script subprocess returned error exit status 20
Errors were encountered while processing:
mdadm
E: Sub-process /usr/bin/dpkg returned an error code (1)
Error - Return code: 100
Here's some system information:
Code: Select all
Kernel: 5.4.0-144-generic x86_64 bits: 64 compiler: gcc v: 9.4.0 Desktop: Cinnamon 5.2.7
tk: GTK 3.24.20 wm: muffin dm: LightDM Distro: Linux Mint 20.3 Una base: Ubuntu 20.04 focal
Machine: Type: Desktop System: Gigabyte product: N/A v: N/A serial: <superuser required> Chassis: type: 3
serial: <superuser required>
Mobo: Gigabyte model: 990XA-UD3 v: x.x serial: <superuser required> UEFI: American Megatrends
v: FD date: 02/04/2013
CPU: Info: quad core model: AMD Phenom II X4 955 bits: 64 type: MCP arch: K10 rev: 3 cache:
L1: 512 KiB L2: 2 MiB L3: 6 MiB
Speed (MHz): avg: 1450 high: 2100 min/max: 800/3200 boost: disabled cores: 1: 800 2: 2100
3: 800 4: 2100 bogomips: 25717
Flags: ht lm nx pae sse sse2 sse3 sse4a svm
[b]RAID:
Device-1: md0 type: mdraid level: mirror status: active size: 1.82 TiB
Info: report: 2/2 UU blocks: 1953382400 chunk-size: N/A super-blocks: 1.2
Components: Online: 0: sdb1 1: sdc1[/b]
Drives:
Local Storage: total: 4.72 TiB used: 1.9 TiB (40.2%)
ID-1: /dev/sda vendor: Samsung model: SSD 750 EVO 120GB size: 111.79 GiB speed: 6.0 Gb/s
serial: <filter>
ID-2: /dev/sdb vendor: Toshiba model: DT01ACA200 size: 1.82 TiB speed: 6.0 Gb/s
serial: <filter>
ID-3: /dev/sdc vendor: Western Digital model: WD20EZRX-00D8PB0 size: 1.82 TiB speed: 6.0 Gb/s
serial: <filter>
ID-4: /dev/sdd vendor: Samsung model: HD103SJ size: 931.51 GiB speed: 3.0 Gb/s
serial: <filter>
ID-5: /dev/sde vendor: Kingston model: SV100S264G size: 59.63 GiB speed: <unknown>
serial: <filter>
Partition:
ID-1: / size: 108.98 GiB used: 35.49 GiB (32.6%) fs: ext4 dev: /dev/sda2
ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/sda1
ID-3: /home size: 1.79 TiB used: 1.4 TiB (78.1%) fs: ext4 dev: /dev/md0
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 1.41 GiB (70.3%) priority: -2 file: /swapfile