No wifi recognize
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
No wifi recognize
I can not activated the Wi-Fi, only plugged internet.
Wireless lan
Soft blocked no
Hard block no
No command I found work.
Wireless lan
Soft blocked no
Hard block no
No command I found work.
Last edited by LockBot on Mon Nov 27, 2023 11:00 pm, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- Pjotr
- Level 24
- Posts: 20142
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: No wifi recognize
First establish temporary internet connection by other means.
Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- Make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
(if you type: the letter F is a capital letter, and don't omit the space after inxi!)
Press Enter.
Copy/paste the output into your next message.
Do the same with the following four commands:
Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- Make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
Code: Select all
inxi -Fxpmrz
Press Enter.
Copy/paste the output into your next message.
Do the same with the following four commands:
Code: Select all
rfkill list all
Code: Select all
iwconfig
Code: Select all
lsusb
Code: Select all
lspci
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: No wifi recognize
Code: Select all
1: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
Code: Select all
boris@boris-Aspire-V3-571:~$ iwconfig
lo no wireless extensions.
enp2s0f0 no wireless extensions.
Code: Select all
boris@boris-Aspire-V3-571:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 1bcf:2c18 Sunplus Innovation Technology Inc. HD Webcam
Bus 001 Device 003: ID 0489:e046 Foxconn / Hon Hai BCM20702A0
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code: Select all
boris@boris-Aspire-V3-571:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
02:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Inc. and subsidiaries BCM57765/57785 SDXC/MMC Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Inc. and subsidiaries BCM57765/57785 MS Card Reader (rev 10)
02:00.3 System peripheral: Broadcom Inc. and subsidiaries BCM57765/57785 xD-Picture Card Reader (rev 10)
03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43228 802.11a/b/g/n
boris@boris-Aspire-V3-571:~$
Last edited by karlchen on Sat May 27, 2023 7:05 am, edited 1 time in total.
Reason: devided the comands and their output and enclosed them in [code] [/code] tags
Reason: devided the comands and their output and enclosed them in [code] [/code] tags
Re: No wifi recognize
Hello, Ampel01.
Seems to me that you forgot to execute and share the output of
Karl
Seems to me that you forgot to execute and share the output of
inxi -Fxpmrz
. Please, execute the command and share its output. Thanks.Karl
The people of Alderaan have been bravely fighting back the clone warriors sent out by the unscrupulous Sith Lord Palpatine for 792 days now.
Lifeline
Re: No wifi recognize
Code: Select all
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Broadcom NetLink BCM57785 Gigabit Ethernet PCIe
vendor: Acer Incorporated ALI driver: tg3 v: kernel port: N/A
bus-ID: 02:00.0
IF: enp2s0f0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Broadcom BCM43228 802.11a/b/g/n vendor: Foxconn
driver: bcma-pci-bridge v: N/A bus-ID: 03:00.0
Bluetooth:
Device-1: Foxconn / Hon Hai BCM20702A0 type: USB driver: btusb v: 0.8
bus-ID: 1-1.1:3
Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter>
bt-v: 2.1 lmp-v: 4.0
Drives:
Local Storage: total: 465.76 GiB used: 12.29 GiB (2.6%)
ID-1: /dev/sda vendor: Seagate model: ST9500325AS size: 465.76 GiB
Partition:
ID-1: / size: 456.88 GiB used: 12.29 GiB (2.7%) fs: ext4 dev: /dev/sda3
ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: vfat
dev: /dev/sda2
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 47.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2161
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com vera main upstream import backport
2: deb http://archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Info:
Processes: 228 Uptime: 3h 20m Init: systemd runlevel: 5 Compilers:
gcc: 11.3.0 Shell: Bash v: 5.1.16 inxi: 3.3.13
boris@boris-Aspire-V3-571:~$
Re: No wifi recognize
Hello,
You will need a temporary internet connection either Ethernet or cellphone. And will need it install the following driver for the Broadcom card.
bcmwl-kerenel-source. you can do that via the terminal with this command.
then reboot. should be working.
You will need a temporary internet connection either Ethernet or cellphone. And will need it install the following driver for the Broadcom card.
bcmwl-kerenel-source. you can do that via the terminal with this command.
Code: Select all
sudo apt install bcmwl-kernel-source
Easy tips : https://easylinuxtipsproject.blogspot.com/ Pjotr's Great Linux projects page.
Linux Mint Installation Guide: http://linuxmint-installation-guide.rea ... en/latest/
Registered Linux User #462608
Linux Mint Installation Guide: http://linuxmint-installation-guide.rea ... en/latest/
Registered Linux User #462608
Re: No wifi recognize
Thans you very much had work
Re: No wifi recognize
enjoy!
If it worked for you please mare thread as solved.
If it worked for you please mare thread as solved.
Easy tips : https://easylinuxtipsproject.blogspot.com/ Pjotr's Great Linux projects page.
Linux Mint Installation Guide: http://linuxmint-installation-guide.rea ... en/latest/
Registered Linux User #462608
Linux Mint Installation Guide: http://linuxmint-installation-guide.rea ... en/latest/
Registered Linux User #462608
Re: No wifi recognize
Hello, Ampel01.
Your inxi output is incomplete. The upper parts are missing. The missing sections are
This happened, because you executed the command in a terminal window and the output scrolled upwards outside the visible window area.
In such cases, some newer terminal window applications will only copy, what is still visible inside the terminal window, when your press <Ctrl>a - <Ctrl><Shift>c in order to copy the terminal output.
Result:
The shared output is incomplete. We still cannot be sure whether you run LMDE 5 or a different Linux Mint edition.
For the future:
When intending to share your Linux Mint System Information, proceed like this instead:
I have followed the steps above. Here is as a sample my System Information (which is of course irrelevant with respect to your solved problem.)
Your inxi output is incomplete. The upper parts are missing. The missing sections are
System:
, Machine:
, Battery:
, CPU:
, Graphics:
This happened, because you executed the command in a terminal window and the output scrolled upwards outside the visible window area.
In such cases, some newer terminal window applications will only copy, what is still visible inside the terminal window, when your press <Ctrl>a - <Ctrl><Shift>c in order to copy the terminal output.
Result:
The shared output is incomplete. We still cannot be sure whether you run LMDE 5 or a different Linux Mint edition.
For the future:
When intending to share your Linux Mint System Information, proceed like this instead:
- Launch "System Settings" in the Application Menu.
- Launch "System Information".
- Click on the button labelled "Copy to clipboard".
- In the forum editor click on the little icon
[</>]
. This will insert the needed [ code ] [ /code ] tags. - Paste the clipboard content into your post.
I have followed the steps above. Here is as a sample my System Information (which is of course irrelevant with respect to your solved problem.)
Code: Select all
System:
Kernel: 5.10.0-23-686 arch: i686 bits: 32 compiler: gcc v: 10.2.1 Desktop: Cinnamon v: 5.6.8
tk: GTK v: 3.24.24 wm: muffin dm: LightDM Distro: LMDE 5 Elsie base: Debian 11.2 bullseye
Machine:
Type: Laptop System: Acer product: AOD260 v: V1.08_Vodafone serial: <superuser required>
Mobo: Acer model: AOD260 v: V1.08_Vodafone serial: <superuser required> BIOS: Acer
v: 1.08_Vodafone date: 06/29/2010
Battery:
ID-1: BAT0 charge: 7.4 Wh (100.0%) condition: 7.4/48.8 Wh (15.2%) volts: 12.5 min: 11.1
model: SANYO AL10B31 serial: N/A status: full
CPU:
Info: single core model: Intel Atom N450 bits: 64 type: MT arch: Bonnell rev: A cache: L1: 56 KiB
L2: 512 KiB
Speed (MHz): avg: 1660 high: 1663 min/max: 1000/1666 cores: 1: 1663 2: 1657 bogomips: 6650
Flags: ht lm nx pae sse sse2 sse3 ssse3
Graphics:
Device-1: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics
vendor: Acer Incorporated ALI driver: i915 v: kernel arch: PowerVR SGX535 ports: active: LVDS-1
empty: VGA-1 bus-ID: 00:02.0 chip-ID: 8086:a011
Device-2: ALi Gateway Webcam type: USB driver: uvcvideo bus-ID: 5-4:3 chip-ID: 0402:9665
Display: x11 server: X.Org v: 1.20.11 with: Xwayland driver: X: loaded: intel
unloaded: fbdev,modesetting,vesa dri: i915 gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1024x600 s-dpi: 96
Monitor-1: LVDS-1 mapped: LVDS1 model: AU Optronics 0x60d2 res: 1024x600 dpi: 118
diag: 255mm (10")
API: OpenGL v: 1.4 Mesa 20.3.5 renderer: Mesa DRI Intel Pineview M x86/MMX/SSE2
direct-render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Acer Incorporated ALI
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8
API: ALSA v: k5.10.0-23-686 status: kernel-api
Server-1: PipeWire v: 0.3.19 status: off with: 1: pipewire-pulse status: off
2: pipewire-media-session status: active
Server-2: PulseAudio v: 14.2 status: active
Network:
Device-1: Qualcomm Atheros AR8132 Fast Ethernet vendor: Acer Incorporated ALI driver: atl1c
v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 5000 bus-ID: 01:00.0 chip-ID: 1969:1062
IF: enp1s0 state: down mac: <filter>
Device-2: Broadcom BCM4313 802.11bgn Wireless Network Adapter driver: wl v: kernel pcie:
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 14e4:4727
IF: wlp2s0 state: up mac: <filter>
Bluetooth:
Device-1: Foxconn / Hon Hai Acer Bluetooth module type: USB driver: btusb v: 0.8 bus-ID: 4-1:2
chip-ID: 0489:e011
Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 1.2 lmp-v: 2.1
sub-v: 4277
Drives:
Local Storage: total: 247.84 GiB used: 20.91 GiB (8.4%)
ID-1: /dev/sda vendor: Toshiba model: MK2565GSX size: 232.89 GiB speed: 3.0 Gb/s
serial: <filter>
ID-2: /dev/sdb type: USB vendor: Transcend model: JetFlash 16GB size: 14.95 GiB
serial: <filter>
Partition:
ID-1: / size: 68.75 GiB used: 8.39 GiB (12.2%) fs: ext4 dev: /dev/sda2
Swap:
ID-1: swap-1 type: partition size: 2 GiB used: 565 MiB (27.6%) priority: -2 dev: /dev/sda3
Sensors:
System Temperatures: cpu: 64.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2103
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //linux-mint.froonix.org elsie main upstream import backport
2: deb http: //artfiles.org/debian/ bullseye main contrib non-free
3: deb http: //artfiles.org/debian/ bullseye-updates main contrib non-free
4: deb http: //security.debian.org/ bullseye-security main contrib non-free
5: deb http: //artfiles.org/debian/ bullseye-backports main contrib non-free
Info:
Processes: 192 Uptime: 1h 22m Memory: 989.2 MiB used: 737.8 MiB (74.6%) Init: systemd v: 247
target: graphical (5) default: graphical Compilers: gcc: 10.2.1 alt: 10 Client: Cinnamon v: 5.6.8
inxi: 3.3.26
The people of Alderaan have been bravely fighting back the clone warriors sent out by the unscrupulous Sith Lord Palpatine for 792 days now.
Lifeline
Re: No wifi recognize
Next Problem my Printer Workshop of wifi and is not found
How can I do it
How can I do it