I have installed the latest version of Linux Mint Debian on my old Packard Bell DOT_S.NC/502 (KAV60).
During the first boot I had problems with the computer going to sleep several times during startup and also once more after I had just logged in. I found a thread that had the solution and changed HandleSuspendKey and HandleLidSwitch to ignore. After that it worked so far, but now I discovered a new phenomenon. When I insert or remove the AC adapter, suspend is triggered for some reason, very annoying when want some more power during a installation .
Do anyone know how to fix it/ignore suspend when going from Battery => AC and from AC => Battery?
The BIOS is also not the best in this old laptop, I get a couple of warnings during startup (ACPI BIOS Error (bug)), I can not find any BIOS upgrade though. The buttons for suspend and hibernate works perfect from the start menu, so if possible I do not want to disable them completly.
This is how I modified logind.conf:
Code: Select all
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it under the
# terms of the GNU Lesser General Public License as published by the Free
# Software Foundation; either version 2.1 of the License, or (at your option)
# any later version.
#
# Entries in this file show the compile time defaults. Local configuration
# should be created by either modifying this file, or by creating "drop-ins" in
# the logind.conf.d/ subdirectory. The latter is generally recommended.
# Defaults can be restored by simply deleting this file and all drop-ins.
#
# Use 'systemd-analyze cat-config systemd/logind.conf' to display the full config.
#
# See logind.conf(5) for details.
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
#UserStopDelaySec=10
#HandlePowerKey=poweroff
#HandlePowerKeyLongPress=ignore
#HandleRebootKey=reboot
#HandleRebootKeyLongPress=poweroff
HandleSuspendKey=ignore
HandleSuspendKeyLongPress=ignore
HandleHibernateKey=ignore
HandleHibernateKeyLongPress=ignore
HandleLidSwitch=ignore
HandleLidSwitchExternalPower=ignore
HandleLidSwitchDocked=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#RebootKeyIgnoreInhibited=no
#HoldoffTimeoutSec=30s
#IdleAction=ignore
#IdleActionSec=30min
#RuntimeDirectorySize=10%
#RuntimeDirectoryInodesMax=
#RemoveIPC=yes
#InhibitorsMax=8192
#SessionsMax=8192
#StopIdleSessionSec=infinity
Code: Select all
[ 0.000000] Linux version 6.1.0-14-686 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.64-1 (2023-11-30)
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f575fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f576000-0x000000007f5befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f66dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f66e000-0x000000007f6befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6eefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6ef000-0x000000007f6fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f6ff000-0x000000007f6fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Packard Bell DOTS /DOTS , BIOS V1.01 03/26/2009
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1662.356 MHz processor
[ 0.006818] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006832] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.006860] last_pfn = 0x7f700 max_arch_pfn = 0x100000
[ 0.006943] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.016275] initial memory mapped: [mem 0x00000000-0x1a3fffff]
[ 0.016377] RAMDISK: [mem 0x2f807000-0x33bfafff]
[ 0.016395] ACPI: Early table checksum verification disabled
[ 0.016407] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACER )
[ 0.016422] ACPI: XSDT 0x000000007F6FE120 000064 (v01 ACER ACER 00000001 01000013)
[ 0.016441] ACPI: FACP 0x000000007F6FC000 0000F4 (v04 ACER ACER 00000001 1025 01000013)
[ 0.016461] ACPI: DSDT 0x000000007F6F1000 006D9F (v01 ACER ACER 00000001 1025 01000013)
[ 0.016475] ACPI: FACS 0x000000007F688000 000040
[ 0.016486] ACPI: FACS 0x000000007F688000 000040
[ 0.016497] ACPI: SSDT 0x000000007F6FD000 0004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.016511] ACPI: HPET 0x000000007F6FB000 000038 (v01 ACER ACER 00000001 1025 01000013)
[ 0.016526] ACPI: APIC 0x000000007F6FA000 000068 (v02 ACER ACER 00000001 1025 01000013)
[ 0.016540] ACPI: MCFG 0x000000007F6F9000 00003C (v01 ACER ACER 00000001 1025 01000013)
[ 0.016553] ACPI: ASF! 0x000000007F6F8000 0000A5 (v32 ACER ACER 00000001 1025 01000013)
[ 0.016567] ACPI: SLIC 0x000000007F6F0000 000180 (v01 ACER ACER 00000001 1025 01000013)
[ 0.016581] ACPI: BOOT 0x000000007F6EF000 000028 (v01 ACER ACER 00000001 1025 01000013)
[ 0.016593] ACPI: Reserving FACP table memory at [mem 0x7f6fc000-0x7f6fc0f3]
[ 0.016599] ACPI: Reserving DSDT table memory at [mem 0x7f6f1000-0x7f6f7d9e]
[ 0.016604] ACPI: Reserving FACS table memory at [mem 0x7f688000-0x7f68803f]
[ 0.016609] ACPI: Reserving FACS table memory at [mem 0x7f688000-0x7f68803f]
[ 0.016613] ACPI: Reserving SSDT table memory at [mem 0x7f6fd000-0x7f6fd4c3]
[ 0.016618] ACPI: Reserving HPET table memory at [mem 0x7f6fb000-0x7f6fb037]
[ 0.016623] ACPI: Reserving APIC table memory at [mem 0x7f6fa000-0x7f6fa067]
[ 0.016628] ACPI: Reserving MCFG table memory at [mem 0x7f6f9000-0x7f6f903b]
[ 0.016632] ACPI: Reserving ASF! table memory at [mem 0x7f6f8000-0x7f6f80a4]
[ 0.016637] ACPI: Reserving SLIC table memory at [mem 0x7f6f0000-0x7f6f017f]
[ 0.016642] ACPI: Reserving BOOT table memory at [mem 0x7f6ef000-0x7f6ef027]
[ 0.016682] 1163MB HIGHMEM available.
[ 0.016686] 875MB LOWMEM available.
[ 0.041128] ACPI: PM-Timer IO Port: 0x408
[ 0.041150] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.041155] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.041175] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.041185] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.041192] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.041205] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.041209] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.472504] ACPI: Added _OSI(Module Device)
[ 0.472517] ACPI: Added _OSI(Processor Device)
[ 0.472523] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.472530] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.486842] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.488677] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.491000] ACPI: Dynamic OEM Table Load:
[ 0.491034] ACPI: SSDT 0x00000000C133F000 0001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.492884] ACPI: Dynamic OEM Table Load:
[ 0.492914] ACPI: SSDT 0x00000000C133E800 0001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.495097] ACPI: Dynamic OEM Table Load:
[ 0.495124] ACPI: SSDT 0x00000000C1219000 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.496671] ACPI: Dynamic OEM Table Load:
[ 0.496699] ACPI: SSDT 0x00000000C1201B40 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.498894] ACPI: EC: EC started
[ 0.498902] ACPI: EC: interrupt blocked
[ 0.499278] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.499291] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions
[ 0.499300] ACPI: Interpreter enabled
[ 0.499387] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.499395] ACPI: Using IOAPIC for interrupt routing
[ 0.499507] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.499516] PCI: Using E820 reservations for host bridge windows
[ 0.500219] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.595911] ACPI: PM: Power Resource [FN00]
[ 0.598234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.598262] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.598436] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20220331/dsfield-184)
[ 0.598534] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20220331/dswload2-477)
[ 0.598609] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529)
[ 0.598711] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.598721] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.598727] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ALREADY_EXISTS
[ 8.688614] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.688844] ACPI: button: Power Button [PWRB]
[ 8.689167] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 8.689399] ACPI: button: Lid Switch [LID0]
[ 8.689776] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 8.690729] ACPI: button: Sleep Button [SLPB]
[ 8.691175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.705049] ACPI: button: Power Button [PWRF]
[ 8.902861] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20220331/utaddress-204)
[ 8.902894] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 8.902904] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20220331/utaddress-204)
[ 8.902926] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 8.902932] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20220331/utaddress-204)
[ 8.902952] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 8.902957] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1356.641941] PM: suspend entry (deep)
[ 1357.202868] Filesystems sync: 0.560 seconds
[ 1357.203283] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 1357.203456] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 1357.204170] Freezing user space processes
[ 1357.211193] Freezing user space processes completed (elapsed 0.007 seconds)
[ 1357.211217] OOM killer disabled.
[ 1357.211222] Freezing remaining freezable tasks
[ 1357.212755] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 1357.212980] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1357.231735] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1357.294025] ata3.00: Entering standby power mode
[ 1357.826952] ACPI: EC: interrupt blocked
[ 1357.839767] ACPI: PM: Preparing to enter system sleep state S3
[ 1357.839951] ACPI: EC: event blocked
[ 1357.839954] ACPI: EC: EC stopped
[ 1357.839956] ACPI: PM: Saving platform NVS memory
[ 1357.841245] Disabling non-boot CPUs ...
[ 1357.843434] smpboot: CPU 1 is now offline
[ 1357.843736] ACPI: PM: Low-level resume complete
[ 1357.843736] ACPI: EC: EC started
[ 1357.843736] ACPI: PM: Restoring platform NVS memory
[ 1357.843736] Enabling non-boot CPUs ...
[ 1357.843736] x86: Booting SMP configuration:
[ 1357.843736] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1357.843375] Disabled fast string operations
[ 1357.843736] CPU1 is up
[ 1357.843736] ACPI: PM: Waking up from system sleep state S3
[ 1357.848860] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 1357.849152] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 1357.849431] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 1357.849708] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 1357.849985] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 1357.850262] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 1357.852087] ACPI: EC: interrupt unblocked
[ 1357.855820] usb usb1: root hub lost power or was reset
[ 1357.856049] usb usb3: root hub lost power or was reset
[ 1357.856265] usb usb4: root hub lost power or was reset
[ 1357.856504] usb usb5: root hub lost power or was reset
[ 1358.015775] ACPI: EC: event unblocked
[ 2450.557857] ACPI: button: The lid device is not compliant to SW_LID.
[ 2707.608132] wls1: deauthenticating from 7a:da:88:2e:60:0d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2709.126830] PM: suspend entry (deep)
[ 2709.786373] Filesystems sync: 0.659 seconds
[ 2709.786823] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 2709.786992] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 2709.787344] Freezing user space processes
[ 2709.793995] Freezing user space processes completed (elapsed 0.006 seconds)
[ 2709.794019] OOM killer disabled.
[ 2709.794024] Freezing remaining freezable tasks
[ 2709.795547] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 2709.795907] printk: Suspending console(s) (use no_console_suspend to debug)
[ 2709.819738] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 2709.868322] ata3.00: Entering standby power mode
[ 2710.384471] ACPI: EC: interrupt blocked
[ 2710.395911] ACPI: PM: Preparing to enter system sleep state S3
[ 2710.396056] ACPI: EC: event blocked
[ 2710.396059] ACPI: EC: EC stopped
[ 2710.396061] ACPI: PM: Saving platform NVS memory
[ 2710.397398] Disabling non-boot CPUs ...
[ 2710.399540] smpboot: CPU 1 is now offline
[ 2710.399698] ACPI: PM: Low-level resume complete
[ 2710.399698] ACPI: EC: EC started
[ 2710.399698] ACPI: PM: Restoring platform NVS memory
[ 2710.399698] Enabling non-boot CPUs ...
[ 2710.399698] x86: Booting SMP configuration:
[ 2710.399698] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2710.399479] Disabled fast string operations
[ 2710.399698] CPU1 is up
[ 2710.403691] ACPI: PM: Waking up from system sleep state S3
[ 2710.404858] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2710.405145] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2710.405423] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2710.405700] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2710.405978] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2710.406255] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2710.409381] ACPI: EC: interrupt unblocked
[ 2710.411921] usb usb1: root hub lost power or was reset
[ 2710.412145] usb usb3: root hub lost power or was reset
[ 2710.412359] usb usb4: root hub lost power or was reset
[ 2710.412601] usb usb5: root hub lost power or was reset
[ 2710.567743] ACPI: EC: event unblocked
[ 2710.667663] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 2710.734752] ata5: SATA link down (SStatus 0 SControl 300)
[ 2710.971490] OOM killer enabled.
[ 2710.971505] Restarting tasks ... done.
[ 2711.008489] random: crng reseeded on system resumption
[ 2711.687960] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[ 2711.772936] video LNXVIDEO:00: Restoring backlight state
[ 2711.773213] PM: suspend exit
[ 2712.127683] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2712.127715] ata3.00: Entering active power mode
[ 2712.161358] ata3.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
[ 2712.189323] ata3.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2712.189891] ata3.00: configured for UDMA/133
[ 2712.189925] ata3.00: Entering active power mode
[ 2714.871017] wls1: authenticate with 7a:da:88:2e:60:0d
[ 2714.871083] wls1: 80 MHz not supported, disabling VHT
[ 2714.876947] wls1: send auth to 7a:da:88:2e:60:0d (try 1/3)
[ 2714.879997] wls1: authenticated
[ 2714.887671] wls1: associate with 7a:da:88:2e:60:0d (try 1/3)
[ 2714.901361] wls1: RX AssocResp from 7a:da:88:2e:60:0d (capab=0x1031 status=0 aid=15)
[ 2714.901572] wls1: associated
[ 2714.901919] ath: EEPROM regdomain: 0x8114
[ 2714.901934] ath: EEPROM indicates we should expect a country code
[ 2714.901940] ath: doing EEPROM country->regdmn map search
[ 2714.901945] ath: country maps to regdmn code: 0x37
[ 2714.901952] ath: Country alpha2 being used: DE
[ 2714.901957] ath: Regpair used: 0x37
[ 2714.901963] ath: regdomain 0x8114 dynamically updated by country element
[ 2714.968940] wls1: Limiting TX power to 20 (20 - 0) dBm as advertised by 7a:da:88:2e:60:0d
[ 2714.969702] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 2737.520014] wls1: deauthenticating from 7a:da:88:2e:60:0d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2739.210024] PM: suspend entry (deep)
[ 2739.763475] Filesystems sync: 0.553 seconds
[ 2739.764065] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 2739.764263] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 2739.765121] Freezing user space processes
[ 2739.791954] Freezing user space processes completed (elapsed 0.026 seconds)
[ 2739.791976] OOM killer disabled.
[ 2739.791981] Freezing remaining freezable tasks
[ 2739.793562] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 2739.793816] printk: Suspending console(s) (use no_console_suspend to debug)
[ 2739.815742] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 2739.897531] ata3.00: Entering standby power mode
[ 2740.424752] ACPI: EC: interrupt blocked
[ 2740.438140] ACPI: PM: Preparing to enter system sleep state S3
[ 2740.438357] ACPI: EC: event blocked
[ 2740.438363] ACPI: EC: EC stopped
[ 2740.438367] ACPI: PM: Saving platform NVS memory
[ 2740.440565] Disabling non-boot CPUs ...
[ 2740.443280] smpboot: CPU 1 is now offline
[ 2740.444224] ACPI: PM: Low-level resume complete
[ 2740.444224] ACPI: EC: EC started
[ 2740.444224] ACPI: PM: Restoring platform NVS memory
[ 2740.444224] Enabling non-boot CPUs ...
[ 2740.444224] x86: Booting SMP configuration:
[ 2740.444224] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2740.443211] Disabled fast string operations
[ 2740.444224] CPU1 is up
[ 2740.447996] ACPI: PM: Waking up from system sleep state S3
[ 2740.449169] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2740.449456] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2740.449734] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2740.450011] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2740.450288] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2740.450565] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20220331/exsystem-141)
[ 2740.452476] ACPI: EC: interrupt unblocked
[ 2740.456305] usb usb1: root hub lost power or was reset
[ 2740.456530] usb usb3: root hub lost power or was reset
[ 2740.456744] usb usb4: root hub lost power or was reset
[ 2740.456958] usb usb5: root hub lost power or was reset
[ 2740.615758] ACPI: EC: event unblocked
[ 2740.711671] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 2740.774738] ata5: SATA link down (SStatus 0 SControl 300)
[ 2741.009227] OOM killer enabled.
[ 2741.009242] Restarting tasks ... done.
[ 2741.063193] random: crng reseeded on system resumption
[ 2741.655636] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[ 2741.763922] video LNXVIDEO:00: Restoring backlight state
[ 2741.763980] PM: suspend exit
Best regards
Mikael