Been using linux mint for a couple years now. Built my own PC a couple months ago and decided to keep using it as my daily-driver.
Since I have started using this computer setup, I have had random instances where the monitor speakers will emit a static... echo? Of the audio that's being played. Sometimes I can play music for several hours with no unwanted noise at all only for it to start making noise out of nowhere.
Regardless of whether the noise is happening while playing music, I cannot recall a single time I have started up the system where the chime that plays when I log into Cinnamon didn't sound garbled and staticy.
I have held off this long on making a bug report because it is so finicky and random with what triggers it or what cures it. I was hoping I could find some sort of pattern with it, but any triggers or cures only take effect some of the time.
The only consistent trigger I have noticed is the onboard voice synthesizer, which is especially problematic because I rely on the text to speech program for school.
I have noticed that having discord booted up, either the app (Flathub ver 0.0.45 atm), or the web browser (Firefox System Package 123.0.1+linuxmint1+virginia) version, will have the noise intrude shortly after.
In the past, restarting the system did remedy the persistent noise when I would play music (although again, there is always static during startup with the Cinnamon DE startup chime), but that no longer works as a solution as of a couple days ago. Maybe of Note: I did apply a host of system updates around this time.
The other day I got it to stop by opening up the display settings, lowering my frame-rate, then moving it back up to 99.98 HZ. I have not been able to replicate this.
This noise does not occur over HDMI (also through the graphics card), through audio played over my case's front headphone jack, or through integrated graphics (using the same wire). Only through DisplayPort when plugged into either GPU DP socket.
I will attach the monitor model, system info, and system-logs labeled "important" at the bottom of this. If there is any information I could provide that would be helpful, please don't hesitate to let me know. I'm a CS student, so I would say I'm not totally in the dark, but I have never meaningfully engaged with LM forums or filed a bug report before.
Any and all help, suggestions, advice appreciated. This has been driving me CRAZY.
MONITOR MODEL_______________________________
Asus VP349CGL 34.0" 3440 x 1440 100 Hz Monitor
SYSTEM INFO__________________________________
Code: Select all
System:
Kernel: 6.1.0-1035-oem x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 6.0.4 tk: GTK 3.24.33
wm: muffin vt: 7 dm: LightDM 1.30.0 Distro: Linux Mint 21.3 Virginia base: Ubuntu 22.04 jammy
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME B650-PLUS v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 2214 date: 01/02/2024
Battery:
Device-1: apple_mfi_fastcharge model: N/A serial: N/A charge: N/A status: N/A
CPU:
Info: 8-core model: AMD Ryzen 7 7800X3D bits: 64 type: MT MCP smt: enabled arch: Zen 3 rev: 2
cache: L1: 512 KiB L2: 8 MiB L3: 96 MiB
Speed (MHz): avg: 3013 high: 3836 min/max: 3000/5012 boost: enabled cores: 1: 3739 2: 2877
3: 2874 4: 2872 5: 2790 6: 2870 7: 2869 8: 3000 9: 3836 10: 2740 11: 3000 12: 2868 13: 2869
14: 2863 15: 3368 16: 2788 bogomips: 134393
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: AMD vendor: Sapphire driver: amdgpu v: kernel pcie: speed: 16 GT/s lanes: 16 ports:
active: DP-1 empty: DP-2,HDMI-A-1,HDMI-A-2 bus-ID: 03:00.0 chip-ID: 1002:744c class-ID: 0300
Device-2: AMD vendor: ASUSTeK driver: amdgpu v: kernel pcie: speed: 16 GT/s lanes: 16 ports:
active: none empty: DP-3,HDMI-A-3 bus-ID: 0e:00.0 chip-ID: 1002:164e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
unloaded: fbdev,modesetting,radeon,vesa gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3440x1440 s-dpi: 96 s-size: 910x381mm (35.8x15.0") s-diag: 987mm (38.8")
Monitor-1: DisplayPort-0 mapped: DP-1 model: ASUS VP349CGL serial: <filter> res: 3440x1440
dpi: 109 size: 800x345mm (31.5x13.6") diag: 871mm (34.3") modes: max: 3440x1440 min: 720x400
OpenGL: renderer: GFX1100 (gfx1100 LLVM 15.0.7 DRM 3.49 6.1.0-1035-oem)
v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
Device-1: AMD driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16 bus-ID: 03:00.1
chip-ID: 1002:ab30 class-ID: 0403
Device-2: AMD vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16
bus-ID: 0e:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
speed: 16 GT/s lanes: 16 bus-ID: 0e:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k6.1.0-1035-oem running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel pcie: speed: 5 GT/s
lanes: 1 port: e000 bus-ID: 0a:00.0 chip-ID: 10ec:8125 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
bus-ID: 0b:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp11s0 state: up mac: <filter>
IF-ID-1: wg-mullvad state: unknown speed: N/A duplex: N/A mac: N/A
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-8:3 chip-ID: 8087:0029
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
sub-v: 237e hci-v: 5.2 rev: 237e
Drives:
Local Storage: total: 1.82 TiB used: 805.16 GiB (43.2%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 980 PRO 2TB size: 1.82 TiB speed: 63.2 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 5B2QGXA7 temp: 36.9 C scheme: GPT
Partition:
ID-1: / size: 1.79 TiB used: 402.58 GiB (22.0%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-6:4 info: Apple iPhone 5/5C/5S/6/SE type: Still Imaging driver: usbfs
interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 05ac:12a8 class-ID: 0601
serial: <filter>
Device-2: 1-7:2 info: ASUSTek AURA LED Controller type: HID driver: hid-generic,usbhid
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA chip-ID: 0b05:19af class-ID: 0300
serial: <filter>
Device-3: 1-8:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb interfaces: 2
rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-2: 2-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-1:2 info: Cherry GmbH Corded Device type: Keyboard,HID driver: hid-generic,usbhid
interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 046a:c098 class-ID: 0300
Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-6: 6-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 7-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 7-1:2 info: SHARKOON GmbH 2.4GHz Wireless rechargeable vertical mouse [More&Better]
type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA
chip-ID: 1ea7:0064 class-ID: 0301
Hub-8: 8-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: N/A mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: amdgpu temp: 48.0 C mem: 51.0 C fan: 0 watts: 17.00 device: amdgpu temp: 41.0 C
Repos:
Packages: 2820 apt: 2785 flatpak: 35
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/amdgpu-proprietary.list
1: deb https: //repo.radeon.com/amdgpu/6.0.1/ubuntu jammy proprietary
Active apt repos in: /etc/apt/sources.list.d/amdgpu.list
1: deb https: //repo.radeon.com/amdgpu/6.0.1/ubuntu jammy main
2: deb-src https: //repo.radeon.com/amdgpu/6.0.1/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb https: //mirror.fcix.net/linuxmint-packages virginia main upstream import backport
2: deb http: //mirrors.accretive-networks.net/ubuntu jammy main restricted universe multiverse
3: deb http: //mirrors.accretive-networks.net/ubuntu jammy-updates main restricted universe multiverse
4: deb http: //mirrors.accretive-networks.net/ubuntu jammy-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Active apt repos in: /etc/apt/sources.list.d/rocm.list
1: deb [arch=amd64] https: //repo.radeon.com/rocm/apt/6.0.1 jammy main
Active apt repos in: /etc/apt/sources.list.d/winehq-focal.sources
1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources
1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/ubuntu jammy main
Info:
Processes: 430 Uptime: 1h 9m wakeups: 1 Memory: 30.56 GiB used: 5.01 GiB (16.4%) Init: systemd
v: 249 runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12 Client: Cinnamon v: 6.0.4 inxi: 3.3.13
SYSTEM LOGS_______________________________
Code: Select all
Error opening PCM device front:2: No such file or directory
gkr-pam: unable to locate daemon control file
Failed to start casper-md5check Verify Live ISO checksums.
hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)