Mint 21.2 Cinnamon
Kernel: 6.5.0-1018-oem
Mint system on a 1T NVME with Windows 10 - dual boot.
Home dot folders on a 2T NVME
Documents, Music etc folders on a 4T spinny with syslinks on the home folder pointing to the appropriate folders on the spinny.
Everything working OK except for 2 problems.
1 - Incorrect icons in the Nemo left panel, easy fixed by editing the user-dirs.dirs in the .config folder and now working OK.
2 - Files on the spinny "Move to Trash" are not showing in the Trash folder but have been moved to the .Trash-1000 folder on the spinny.
On reboot the offending files show in the Trash folder.
Files moved or deleted on either of the 2 NVME drives are working as they should.
Copy of the fstab entry for the offending drive.
LABEL=My_Documents /media/gazza/My_Documents auto nosuid,nodev,nofail,x-gvfs-show 0 0
Yep I probably should have used the UUID for this drive. Appreciate it if anyone has the correct syntax using the UUID
TIA
Gazza
"Move to Trash" files not showing in Trash
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Re: "Move to Trash" files not showing in Trash
example fstab entry using UUID:
UUID=6e6bcff8-3e24-4f6e-a8f5-3696a668a773 /mnt/backup ext4 defaults,nofail,noauto,x-systemd.automount 0 2
Everything in life was difficult before it became easy.
Re: "Move to Trash" files not showing in Trash
To get the UUID of partitions, in Terminal run:
Code: Select all
blkid
Re: "Move to Trash" files not showing in Trash
certainly and it's ilk:JerryF wrote: ⤴Sun Mar 24, 2024 9:35 am To get the UUID of partitions, in Terminal run:
Code: Select all
blkid
Code: Select all
lsblk
Everything in life was difficult before it became easy.
Re: "Move to Trash" files not showing in Trash
Thanks all for the replies.
blkid, lsblk and other stuff below.
Today I updated 21.2 to 21.3 rebooted and created some temp files on the 4T spinny and then moved them to trash. This time they were moved to the Trash folder but showed twice in the Trash folder - weird.
This turned out to be a temp situation with "Move to Trash" files not moving to Trash until I rebooted when the offending files then appeared in the Trash folder and the "Move to Trash" worked as it should for a while but again this turned out to be a temp thing and I'm back to files being moved to the .Trash-1000 folder on the spinny but not to the main Trash folder.
Not sure if any of the above is making sense because it's got me bloody confused.
This problem only started after I moved the Documents, Music, Video etc. folders from Home on the 2T m.2 to the 4T spinny.
Apart from the above insane rambling the comp is working perfectly.
Any chance I may have stuffed sumptin' in the fstab entry?
LABEL=My_Documents /media/gazza/My_Documents auto nosuid,nodev,nofail,x-gvfs-show 0 0
cheers
Gazza
blkid, lsblk and other stuff below.
Code: Select all
/dev/nvme0n1p5: UUID="59f92c20-f729-4f8d-8a97-348a9c8986c9" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="11e4ef45-4b85-4e44-b144-7ec4c261796c"
/dev/nvme0n1p3: BLOCK_SIZE="512" UUID="90B63250B63236D6" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="6ddc76cf-e136-4f32-931e-76546c597ae9"
/dev/nvme0n1p1: UUID="2430-ED45" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="972f7ba4-bf93-44cd-a125-35d91aebc98d"
/dev/nvme0n1p4: BLOCK_SIZE="512" UUID="760E50770E5031FB" TYPE="ntfs" PARTUUID="ece6ea27-7663-4e7c-89de-96825a874b6e"
/dev/nvme1n1p1: LABEL="Home" UUID="7c0afefd-92c1-4cf4-8f87-fa92c44416a1" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="3f78590d-a9b5-4198-894b-4792ec296153"
/dev/sda1: LABEL="My_Documents" UUID="110e42aa-4baf-48f0-8fbd-4e2f0b276266" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="5b861657-6a34-4543-b87f-95f69d597c9a"
Code: Select all
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 3.6T 0 disk
└─sda1 8:1 0 3.6T 0 part /media/gazza/My_Documents
sr0 11:0 1 1024M 0 rom
sr1 11:1 1 1024M 0 rom
nvme1n1 259:0 0 1.8T 0 disk
└─nvme1n1p1 259:1 0 1.8T 0 part /home
nvme0n1 259:2 0 931.5G 0 disk
├─nvme0n1p1 259:3 0 100M 0 part /boot/efi
├─nvme0n1p2 259:4 0 16M 0 part
├─nvme0n1p3 259:5 0 465.4G 0 part
├─nvme0n1p4 259:6 0 509M 0 part
└─nvme0n1p5 259:7 0 465.5G 0 part /
Code: Select all
System:
Kernel: 6.5.0-1018-oem x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 6.0.4 tk: GTK 3.24.33
wm: muffin dm: LightDM Distro: Linux Mint 21.3 Virginia base: Ubuntu 22.04 jammy
Machine:
Type: Desktop Mobo: MSI model: Z170A GAMING M7 (MS-7976) v: 1.0 serial: <superuser required>
UEFI: American Megatrends v: 1.L0 date: 06/28/2018
CPU:
Info: quad core model: Intel Core i7-6700K bits: 64 type: MT MCP arch: Skylake-S rev: 3 cache:
L1: 256 KiB L2: 1024 KiB L3: 8 MiB
Speed (MHz): avg: 2551 high: 4001 min/max: 800/4200 cores: 1: 1779 2: 800 3: 4000 4: 2333
5: 4001 6: 3360 7: 2588 8: 1549 bogomips: 63999
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT / 6800M] vendor: Gigabyte driver: amdgpu v: kernel
pcie: speed: 16 GT/s lanes: 16 ports: active: HDMI-A-1 empty: DP-1,DP-2,HDMI-A-2 bus-ID: 03:00.0
chip-ID: 1002:73df
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
unloaded: fbdev,modesetting,radeon,vesa gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96
Monitor-1: HDMI-A-0 mapped: HDMI-A-1 model: Philips PHL 288E2 res: 3840x2160 dpi: 157
diag: 708mm (27.9")
OpenGL: renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.7 DRM 3.54 6.5.0-1018-oem)
v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170
Device-2: AMD Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] driver: snd_hda_intel
v: kernel pcie: speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28
Sound Server-1: ALSA v: k6.5.0-1018-oem running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Qualcomm Atheros Killer E2400 Gigabit Ethernet vendor: Micro-Star MSI driver: alx
v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 06:00.0 chip-ID: 1969:e0a1
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: ASUSTeK driver: wl
v: kernel pcie: speed: 2.5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 14e4:43a0
IF: wlp7s0 state: down mac: <filter>
Drives:
Local Storage: total: 6.37 TiB used: 1.36 TiB (21.4%)
ID-1: /dev/nvme0n1 vendor: Kingston model: SNVS1000G size: 931.51 GiB speed: 31.6 Gb/s
lanes: 4 serial: <filter> temp: 32.9 C
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 2TB size: 1.82 TiB speed: 31.6 Gb/s
lanes: 4 serial: <filter> temp: 36.9 C
ID-3: /dev/sda vendor: Western Digital model: WD40EZAZ-00SF3B0 size: 3.64 TiB speed: 6.0 Gb/s
serial: <filter>
Partition:
ID-1: / size: 457.07 GiB used: 35.16 GiB (7.7%) fs: ext4 dev: /dev/nvme0n1p5
ID-2: /boot/efi size: 96 MiB used: 33.7 MiB (35.1%) fs: vfat dev: /dev/nvme0n1p1
ID-3: /home size: 1.79 TiB used: 383.67 GiB (20.9%) fs: ext4 dev: /dev/nvme1n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 29.8 C pch: 38.0 C mobo: 27.8 C gpu: amdgpu temp: 38.0 C mem: 34.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Repos:
Packages: 2759 apt: 2722 flatpak: 37
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com virginia main upstream import backport
2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list
1: deb [signed-by=/usr/share/keyrings/plexmediaserver-archive.keyring.gpg] https: //downloads.plex.tv/repo/deb public main
Active apt repos in: /etc/apt/sources.list.d/virtualbox.list
1: deb [arch=amd64 signed-by=/usr/share/keyrings/oracle-virtualbox-2016.gpg] http: //download.virtualbox.org/virtualbox/debian jammy contrib
Active apt repos in: /etc/apt/sources.list.d/wfg-0ad-jammy.list
1: deb [signed-by=/usr/share/keyrings/Launchpad_0AD-archive.keyring.gpg] http: //ppa.launchpad.net/wfg/0ad/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources
1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/ubuntu jammy main
Info:
Processes: 306 Uptime: 9m Memory: 31.29 GiB used: 2 GiB (6.4%) Init: systemd v: 249 runlevel: 5
Compilers: gcc: 11.4.0 alt: 11/12 Client: Unknown python3.10 client inxi: 3.3.13
This turned out to be a temp situation with "Move to Trash" files not moving to Trash until I rebooted when the offending files then appeared in the Trash folder and the "Move to Trash" worked as it should for a while but again this turned out to be a temp thing and I'm back to files being moved to the .Trash-1000 folder on the spinny but not to the main Trash folder.
Not sure if any of the above is making sense because it's got me bloody confused.
This problem only started after I moved the Documents, Music, Video etc. folders from Home on the 2T m.2 to the 4T spinny.
Apart from the above insane rambling the comp is working perfectly.
Any chance I may have stuffed sumptin' in the fstab entry?
LABEL=My_Documents /media/gazza/My_Documents auto nosuid,nodev,nofail,x-gvfs-show 0 0
cheers
Gazza
Last edited by Gazza on Tue Mar 26, 2024 1:22 am, edited 1 time in total.
Re: "Move to Trash" files not showing in Trash
When posting results of Terminal commands please paste them into a post instead of linking files that have to be opened/downloaded. I, and I'm sure many other members don't like the risk.Gazza wrote: ⤴Mon Mar 25, 2024 9:22 am Thanks all for the replies.
blkid, lsblk and other stuff below.
lsblk.txt
blkid.txt
https://termbin.com/2m2d
Today I updated 21.2 to 21.3 rebooted and created some temp files on the 4T spinny and then moved them to trash. This time they were moved to the Trash folder but showed twice in the Trash folder - weird.
This turned out to be a temp situation with "Move to Trash" files not moving to Trash until I rebooted when the offending files then appeared in the Trash folder and the "Move to Trash" worked as it should for a while but again this turned out to be a temp thing and I'm back to files being moved to the .Trash-1000 folder on the spinny but not to the main Trash folder.
Not sure if any of the above is making sense because it's got me bloody confused.
This problem only started after I moved the Documents, Music, Video etc. folders from Home on the 2T m.2 to the 4T spinny.
Apart from the above insane rambling the comp is working perfectly.
Any chance I may have stuffed sumptin' in the fstab entry?
LABEL=My_Documents /media/gazza/My_Documents auto nosuid,nodev,nofail,x-gvfs-show 0 0
cheers
Gazza
If you're unsure on how to do that:
In Terminal, click and drag the cursor from the beginning of the output and scroll to the end. Don't use the Select All from the Edit menu because that only selects what is showing on screen. Then, copy the results of the command from the Terminal by
Shift+Ctrl+C
or from the menu, Edit, Copy. In a forum post, click the </>
button from the mini toolbar that can be found above the text box where you type your reply. Code tags [code]
[/code]
will be inserted. Place your cursor between the code tags and paste the results of the command between the tags. Example: [code]
copied results[/code]
. Pasting can be done by Ctrl+V
or right-click, Paste.Re: "Move to Trash" files not showing in Trash
Thanks Jerry, post fixed