Fujitsu FMVMG30 V Live CD can't access tty

Husse · Post by **Husse** » Thu Aug 02, 2007 5:20 am

Have you tried "safe graphics mode"? Probably - just asking.
Can you turn off any of these?

Core multiprocessing enabled
Speedstep Technology enabled
XD bit functionality enabled
Virtualization Technology enabled

Obviously people get at least Ubuntu working with this chipset.

Husse · Post by **Husse** » Fri Aug 03, 2007 6:36 am

modprobe piix

This means that you loaded a driver for PCI IDE/ISA Hopefully this is solved in an install, but you may have to fiddle a bit, in which case you are welcome to ask again (I'm pretty confident this does not happen)

Husse · Post by **Husse** » Mon Oct 22, 2007 6:56 am

Start in "Safe graphics mode". If that does not help and you end up in a tty after the failed x-server check which driver is actually set to be used

Code: Select all

nano /etc/X11/xorg.conf

Note that the X in X11 is a major X
Scroll down (use the arrow keys) to the only section called just "Device". Driver should be "vesa"