USB 3.0 Controller and Card Reader aren't working

Archived topics about LMDE 1 and LMDE 2
Locked
mfractal

USB 3.0 Controller and Card Reader aren't working

Post by mfractal »

Hi all, newbie here with some questions.
I've installed the latest LMDE release on my Alienware M18x and noticed some issues.

Firstly - the USB 3.0. The m18x has two USB controllers, one is USB 2.0 the other is USB 3.0.
The 2.0 controller works just fine out of the box while the 3.0 controller does not work - nothing happens with i stick a USB drive in.

Here's what i see :

Code: Select all

lspci -k
...
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
22:00.0 USB Controller: NEC Corporation uPD720200 3.0 Host Controller (rev 04)
Subsystem: Dell Device 048f
...
So the problematic one is of course the 22:00.0 USB Controller: NEC Corporation uPD720200 3.0 Host Controller (rev 04)

Any idea how to diagnose/fix the problem ?
(I found this post saying i need to build the kernel (!) http://okomestudio.net/biboroku/?p=1360 but i don't really want to go there)

Second issue is with the card reader which is being shown as follows :

Code: Select all

lspci -k
...
14:00.0 Unassigned Class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Subsystem: Dell Device 048f
14:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Subsystem: Dell Device 048f
kernel driver in use: sdhci-pci
...
Whenever i insert a SD card absolutely nothing happens.

Again, any suggestions are greatly appreciated!
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
mfractal

Re: USB 3.0 Controller and Card Reader aren't working

Post by mfractal »

Guys, i would really appreciate some help. Isn't this the right section i am posting the problem at ?
mank_in

Re: USB 3.0 Controller and Card Reader aren't working

Post by mank_in »

I didn't have USB 3.0 Controller and not using LMDE .
But maybe you can show your output of lsusb ?
mfractal

Re: USB 3.0 Controller and Card Reader aren't working

Post by mfractal »

Ok, there it is.

Code: Select all

avenger WID62 # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 413c:8187 Dell Computer Corp. DW375 Bluetooth Module
Bus 003 Device 003: ID 05ca:181a Ricoh Co., Ltd 
Bus 003 Device 004: ID 187c:0518 Alienware Corporation 
not sure if it helps though...
mank_in

Re: USB 3.0 Controller and Card Reader aren't working

Post by mank_in »

After searching internet for almost 2 hours , i am found
A possible solution to get USB 3.0 devices to work
empereur

Re: USB 3.0 Controller and Card Reader aren't working

Post by empereur »

Still nothing about the card reader? Got the same probleme.... Still realtek.... seem to be a quite wide probleme =(
empereur

Re: USB 3.0 Controller and Card Reader aren't working

Post by empereur »

Finaly it is working for me, ad to manually install the driver for realtek

http://putokaz.wordpress.com/2011/02/23 ... in-ubuntu/

Hope it will work for you to=)
Locked

Return to “LMDE Archive”