Mint 13 (Maya) RC out

Chat about anything related to Linux Mint
Post Reply
akavir
Level 2
Level 2
Posts: 55
Joined: Mon Jun 13, 2011 1:54 am

Re: Mint 13 (Maya) RC out

Post by akavir »

caf4926 wrote:Darn
I actually think this is ready for release.
As far as the base system, yes so far I haven't found any bugs in the cinnamon-64 bit yet. But as far as some compatibilities with packages in the main repo, I've already got issues. My first issues is cario-dock just plain refuses to work as a standalone session. I've tried this in Ubuntu 12.04 after bringing in cinnamon and it worked great, but out of the box it doesn't work at all in Mint 13. Second I notice that the repo isn't a direct copy of the ubuntu precise repo. PCSX-R is still the old version, but precise has the newest, but yet I'm thrilled to see the latest XBMC making into the repos finally. And on another personal note I see the user groups GUI has been removed from the admin bar. Guess I gotta add myself to the audio group via terminal.

All in all, I like the look and feel much better now! Cinnamon has come a long way very fast! Going to test out the MATE version too!

User avatar
esteban1uy
Level 5
Level 5
Posts: 733
Joined: Sat Nov 12, 2011 6:20 am

Re: Mint 13 (Maya) RC out

Post by esteban1uy »

akavir wrote:Second I notice that the repo isn't a direct copy of the ubuntu precise repo. PCSX-R is still the old version, but precise has the newest
Well, I'm not sure but my Mint 13 Cinnamon has pcsxr ver 1.9.92-3build1 available, that is exactly
the same version as the latest for Ubuntu Precise (http://packages.ubuntu.com/precise/pcsxr):

Image
Sorry, I only speak Spanish

akavir
Level 2
Level 2
Posts: 55
Joined: Mon Jun 13, 2011 1:54 am

Re: Mint 13 (Maya) RC out

Post by akavir »

esteban1uy wrote:
akavir wrote:Second I notice that the repo isn't a direct copy of the ubuntu precise repo. PCSX-R is still the old version, but precise has the newest
Well, I'm not sure but my Mint 13 Cinnamon has pcsxr ver 1.9.92-3build1 available, that is exactly
the same version as the latest for Ubuntu Precise (http://packages.ubuntu.com/precise/pcsxr):
And you are correct, I realize now that the version I had gotten when testing Precise came from a PPA I was using that happened to have the SVN build in it, and never realized til now. Thanks for the correction.

Monsta
Level 10
Level 10
Posts: 3055
Joined: Fri Aug 19, 2011 3:46 am

Re: Mint 13 (Maya) RC out

Post by Monsta »

akavir wrote:I notice that the repo isn't a direct copy of the ubuntu precise repo.
It is not a copy indeed - it is the precise repo :D

Code: Select all

monsta@maya ~ $ inxi -r
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://packages.linuxmint.com/ maya main upstream import
           deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu/ precise-security main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu/ precise partner
           deb http://packages.medibuntu.org/ precise free non-free

User avatar
Bolle1961
Level 5
Level 5
Posts: 734
Joined: Tue Jun 29, 2010 12:59 pm
Contact:

Re: Mint 13 (Maya) RC out

Post by Bolle1961 »

How can i start the installe? It's not in the bootmenu
“Only when the last tree has been cut down, the last fish been caught, and the last stream poisoned, will we realize we cannot eat money.” ― Cree Indian Prophecy
Image

Monsta
Level 10
Level 10
Posts: 3055
Joined: Fri Aug 19, 2011 3:46 am

Re: Mint 13 (Maya) RC out

Post by Monsta »

Bolle1961 wrote:How can i start the installe? It's not in the bootmenu
It's not there because this is the live CD. Press Enter at the first option, wait until the desktop loads, double-click on the install icon on the desktop, that's all :)

User avatar
Bolle1961
Level 5
Level 5
Posts: 734
Joined: Tue Jun 29, 2010 12:59 pm
Contact:

Re: Mint 13 (Maya) RC out

Post by Bolle1961 »

Yeah right, that's just what i did and then the installer crashes, see my earlier post ;)

http://forums.linuxmint.com/viewtopic.p ... 91#p580091
“Only when the last tree has been cut down, the last fish been caught, and the last stream poisoned, will we realize we cannot eat money.” ― Cree Indian Prophecy
Image

User avatar
eanfrid
Level 7
Level 7
Posts: 1856
Joined: Mon Apr 30, 2012 2:49 am
Location: FR

Re: Mint 13 (Maya) RC out

Post by eanfrid »

There are still some minor glitches remaining in Cinnamon version (tested Maya 64bit RC). Regarding at least my locale choice (french), the current applications menu shows untranslated application group labels e.g accessories, graphics, office, system tools (respectively instead of accessoires, graphique(s), bureautique, outils système). "Computer" and "Home" desktop icon labels are also not translated.

The login screen is partially translated too, still saying "welcome to $HOSTNAME" where it should read "Bienvenue sur $HOSTNAME".

Quite not a life-and-death matter but as I (easily) convinced my 70+ years-old mother to switch from Windows Seven to Linux Mint, it lacks some polishing... ;)
Main desktop: Debian GNU/Linux Jessie 64bit - MATE
(i5 2400@3.7GHz - 16GB DDR3 - HD6770 w/radeon driver - SSD+RAID1)
Safer than Dropbox

User avatar
esteban1uy
Level 5
Level 5
Posts: 733
Joined: Sat Nov 12, 2011 6:20 am

Re: Mint 13 (Maya) RC out

Post by esteban1uy »

cwwgateway wrote:
esteban1uy wrote: The other way is stepping in front of your pc shouting:
For it is Linus Torvalds who command you...
The majestic Clement Lefebvre commands you..
Richard Stallman himself commands you...
Reveal yourself daemon!
:lol: :lol: :lol: :lol: :lol:
I tried this, but it didn't work :lol: . I added a Mark Shuttleworth line and it worked :lol:. Anyway, I really like the Cinnamon RC so far.
Oh no! You summoned the fallen (from space) angel, now we have to restart the xorg-cism.
Please knee in front of your pc and repeat after me:
Ego repellam sordido daemon Marcus Shuttleworthius et horrendum productum Ubuntu Precisum cum putrido Unitius.
In nomine Torvalds et Lefebvre et Ricardus Stallman...
HighMem
Sorry, I only speak Spanish

fillmont
Level 1
Level 1
Posts: 2
Joined: Wed May 16, 2012 9:35 am

Re: Mint 13 (Maya) RC out

Post by fillmont »

So I have installed Mint in a virtual box, mainly to see how Cinnamon is doing, and it is stuck in the fallback mode. Any diagnostics I can do to determine why it doesn't want to run Cinnamon proper?

squeezy
Level 5
Level 5
Posts: 557
Joined: Thu Feb 23, 2012 2:05 pm
Location: The Land of Enchantment

Re: Mint 13 (Maya) RC out

Post by squeezy »

fillmont wrote:So I have installed Mint in a virtual box, mainly to see how Cinnamon is doing, and it is stuck in the fallback mode. Any diagnostics I can do to determine why it doesn't want to run Cinnamon proper?
Cinnamon needs 3D support in the graphics card. Is your VB install set up to supply it?

User avatar
lKingjr
Level 5
Level 5
Posts: 807
Joined: Tue Jun 30, 2009 7:09 pm

Re: Mint 13 (Maya) RC out

Post by lKingjr »

really minor issue. when the MATE panel is set to autohide it occasionally sticks open for no reason I can tell. It will be visible for quite a long time then mysteriously hides itself again. installed as a guest in VirtualBox.
there are three groups of people in the world. those that can count, and those that can't.
iMac 3.4 GHz Intel Core i7 32GB NVIDIA GeForce GTX 680MX 2048 MB

User avatar
lKingjr
Level 5
Level 5
Posts: 807
Joined: Tue Jun 30, 2009 7:09 pm

Re: Mint 13 (Maya) RC out

Post by lKingjr »

fillmont wrote:So I have installed Mint in a virtual box, mainly to see how Cinnamon is doing, and it is stuck in the fallback mode. Any diagnostics I can do to determine why it doesn't want to run Cinnamon proper?
I have Cinnamon running as a guest in VB 4.1.14 and have no issue with it running. No fallback.
there are three groups of people in the world. those that can count, and those that can't.
iMac 3.4 GHz Intel Core i7 32GB NVIDIA GeForce GTX 680MX 2048 MB

fillmont
Level 1
Level 1
Posts: 2
Joined: Wed May 16, 2012 9:35 am

Re: Mint 13 (Maya) RC out

Post by fillmont »

squeezy wrote:
fillmont wrote:So I have installed Mint in a virtual box, mainly to see how Cinnamon is doing, and it is stuck in the fallback mode. Any diagnostics I can do to determine why it doesn't want to run Cinnamon proper?
Cinnamon needs 3D support in the graphics card. Is your VB install set up to supply it?
Ah, thought I had that set up right, but didn't. Thanks for the help!

Now to go poking around! :D

User avatar
selittl
Level 2
Level 2
Posts: 60
Joined: Fri Aug 27, 2010 7:56 pm

Re: Mint 13 (Maya) RC out

Post by selittl »

I'm finding the RC stable. I wish I could get cinnamon to work better with the ATI fglrx drivers though. It works well with the gallium drivers, but if I use the gallium drivers my laptop runs very hot and I have no control over brightness. If I use the fglrx drivers, cinnamon does not play well. I installed xfce 4.10 from the xubuntu repo and it is working well and looks good.

Image
Last edited by selittl on Wed May 16, 2012 12:01 pm, edited 1 time in total.

cariyawa
Level 1
Level 1
Posts: 6
Joined: Mon May 14, 2012 11:40 pm

Re: Mint 13 (Maya) RC out

Post by cariyawa »

I am also having problem wth fglrx driver with cinnamon in my desktop. I also have the following problem too.

http://forums.linuxmint.com/viewtopic.p ... 02#p580202

I am going to try MATE and see how it works. I really don't care about eye candy. I just need a solid OS that works.

User avatar
Bolle1961
Level 5
Level 5
Posts: 734
Joined: Tue Jun 29, 2010 12:59 pm
Contact:

Re: Mint 13 (Maya) RC out

Post by Bolle1961 »

cariyawa wrote:I just need a solid OS that works.
in that case, take Debian stable :lol: :lol: :wink:
“Only when the last tree has been cut down, the last fish been caught, and the last stream poisoned, will we realize we cannot eat money.” ― Cree Indian Prophecy
Image

User avatar
tdockery97
Level 14
Level 14
Posts: 5059
Joined: Sun Jan 10, 2010 8:54 am
Location: Mt. Angel, Oregon

Re: Mint 13 (Maya) RC out

Post by tdockery97 »

cariyawa wrote:I am also having problem wth fglrx driver with cinnamon in my desktop. I also have the following problem too.

http://forums.linuxmint.com/viewtopic.p ... 02#p580202

I am going to try MATE and see how it works. I really don't care about eye candy. I just need a solid OS that works.
As far as I can tell from previous posts and my own experience, ATI has problems with both Cinnamon and Gnome 3 shell. I'm running the Mint 13 MATE version and the ATI proprietry driver installed perfectly with the Additional Drivers utility.
Mint Cinnamon 19.3

squeezy
Level 5
Level 5
Posts: 557
Joined: Thu Feb 23, 2012 2:05 pm
Location: The Land of Enchantment

Re: Mint 13 (Maya) RC out

Post by squeezy »

I'm finding the MATE version to be the best Ubuntu-based Mint I've used yet. None of the slowness or lag the other U-based Mints have had. It feels very much like the LMDE version in response. Everything is working great so far. And being an LTS release is a huge plus. This one's a keeper!

realitykid
Level 3
Level 3
Posts: 184
Joined: Mon Jan 24, 2011 10:43 pm

Re: Mint 13 (Maya) RC out

Post by realitykid »

I say so far so good for the Cinnamon RC. It works well on my laptop, installed onto a USB flash drive. I've played music (thanks dev team for not removing Banshee), watched youtube, checked email, installed Chromium, changed both the GTK and Cinnamon themes, changed my background and installed, and setup, xsensors. So far, the only problem I've had is I cannot get xsensors to display Fahrenheit. Yes, my WiFi does work too, as well as Ethernet.

I also had problems with it installed in VirtualBox, but that might be because I have an outdated version of Vbox installed.

So far, so good. I hope we will see a stable release soon.
Read my full signature, it's too long for this forum:

https://dl.dropboxusercontent.com/u/113 ... nature.txt

Post Reply

Return to “Chat about Linux Mint”