Works fine for me, multi-arch and all.Regulus74 wrote:Has anyone tried the new Debian repo?
http://http.debian.net/
LMDE BREAKAGES - (Tracking SID!) -{CLOSED}
Forum rules
LMDE 2 has reached end of support as of 1-1-2019
LMDE 2 has reached end of support as of 1-1-2019
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
-
- Level 4
- Posts: 357
- Joined: Fri Sep 17, 2010 9:55 pm
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
I've been following the multiarch discussion with a great deal of interest. I found https://wiki.ubuntu.com/MultiarchSpec which has the following to say:GeneC wrote:Yep!...zerozero wrote: i don't think that this multiarch approach was intended for these kind of pkgs but they could at least package the basic just saying
Was pretty sure it wasn't meant to install i386 packages, when amd64 was available. Not even sure why one would want to.. (Unless they were me, and playing around.. )
Perhaps meant more for installing i386 packages not available in the 64bit version? I remember once installing a CAD program only available in 32 bit (Draftsight) by forcing the architecture.Perhaps I will try it again on this multiarch setup and see if it installs.Code: Select all
sudo dpkg -i --force-architecture <package name>
Although this comes from a Ubuntu wiki it does seem to explain what some of you have been experiencing. Looks like multiarch has a way to go yet.Although a simple change to a configuration option (dpkg --force-architecture) is sufficient to permit installation of .debs built for another architecture, more information is needed if we want package managers to intelligently resolve the dependencies for these packages. Some dependencies on other packages, such as on ELF libraries, can only be satisfied by a package of the same architecture ("x->x dependency"); others, such as dependencies on an interpreter used by a maintainer script, can be satisfied by a package of any architecture as long as it's functional ("x->any dependency").
Today, dependency resolution is restricted to packages with the same architecture (with the exception of Architecture: all packages), and a package of the same name but a different architecture is assumed to not be co-installable. This spec introduces a new binary package field Multi-Arch, to be set on any package wanting a different behaviour from today, based on this specification.
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Yep. Its very new and very much expected to not be fully mature yet, but sure holds interesting possibilities for the future...GeneBenson wrote:............. Looks like multiarch has a way to go yet.
I am not a Skype or Wine user. In the two years I have been using LMDE, the previous DraftSight example is the only 32 bit package I ever tried to install on my (LMDE/Shell/SID) installation.
Looking forward to seeing future developments.
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Not reporting a breakage at all, but an experiment.
(Things are just TOO quiet in SID)....
1. I upgraded to XFCE 4.10
2. Added xfapplet and Mintmenu....
See http://forums.linuxmint.com/viewtopic.p ... 56#p621516
'zerozero' will shake his head in dis-approval...
(just an experiment... had to use Maya repo..temporarily, and aptitude to solve depends.)
(Things are just TOO quiet in SID)....
1. I upgraded to XFCE 4.10
2. Added xfapplet and Mintmenu....
See http://forums.linuxmint.com/viewtopic.p ... 56#p621516
'zerozero' will shake his head in dis-approval...
(just an experiment... had to use Maya repo..temporarily, and aptitude to solve depends.)
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
GeneC wrote: 'zerozero' will shake his head in dis-approval...
Compiling XFCE 4.10 Missing panel plugins.
If you are at SID/XFCE 4.10 and want to add some missing panel plugins look here...
http://forums.linuxmint.com/viewtopic.p ... 96#p622096
I've done the 'weather plugin', and 'date/time'
Weather is a new one, and quite a bit more inclusive...
http://forums.linuxmint.com/viewtopic.p ... 96#p622096
I've done the 'weather plugin', and 'date/time'
Weather is a new one, and quite a bit more inclusive...
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Not a breakage, but ....
Back some 4 months ago we had to modify our etc/apt/preferences file (or delete it) as Mint libcairo and fontconfig prevented normal SID DU's. That has changed. I just noticed a couple days ago while updating my new KDE/LMDE installtion from UP5 to SID, that was no longer necessary. Upgrade proceeded just fine with the standard Mint preferences
Today, out of curiosity I changed one of my old SID partitions from having no preferences file (I deleted it back when...). To having the standard Mint preferences file (the one above), to see if there were any additional upgrades available. There were -- a couple multimedia files.
No doubt, of little importance, but might interest some...
Back some 4 months ago we had to modify our etc/apt/preferences file (or delete it) as Mint libcairo and fontconfig prevented normal SID DU's. That has changed. I just noticed a couple days ago while updating my new KDE/LMDE installtion from UP5 to SID, that was no longer necessary. Upgrade proceeded just fine with the standard Mint preferences
Code: Select all
Package: *
Pin: release o=linuxmint
Pin-Priority: 700
Package: *
Pin: origin packages.linuxmint.com
Pin-Priority: 700
Package: *
Pin: release o=Debian
Pin-Priority: 500
Code: Select all
Commit Log for Sat Sep 22 15:59:14 2012
Upgraded the following packages:
libavcodec53 (6:0.8.3-7) to 7:0.10.3-dmo1
libavformat53 (6:0.8.3-7) to 7:0.10.3-dmo1
libavutil51 (6:0.8.3-7) to 7:0.11.2-dmo1
Installed the following packages:
libaacplus2 (2.0.2-dmo1)
libx264-124 (3:0.124.2197+git69a0443-dmo1)
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
I have 3 installs of Debian, on 3 different laptops.
My primary (for work) OS is a basic Debian 6 Squeeze set to 'stable+backports' ... using the backports repro keeps everything up-to-date and Debian is well known for being rock-solid-stable always!! Just keeps getting more and more stable as time goes on.
I recently, installed a new release of Debian 7 Wheezy (testing) after the freeze began. I like what I see with what the new Debian OS is becoming.
Third, but not least, is an original install of LMDE 201012 - upgraded to Sid (unstable). I find nothing lacking with 'unstable'. Pretty, fast, up-to-date and everything works, as they say with most MInt releases - out of the box.
I have installed several Window Managers with my LMDE-Sid install ... Gnome, Xfce, Openbox, Fluxbox, Awesome.
LMDE-Sid ... No problems with stability what-so-ever. Only real major change was not using Mint-Updater, as it can't keep up with updating Sid using the Terminal and the use of APT: Pinning in Preferences.
My LMDE-Sid install is quickly becoming my main OS-distro.
My primary (for work) OS is a basic Debian 6 Squeeze set to 'stable+backports' ... using the backports repro keeps everything up-to-date and Debian is well known for being rock-solid-stable always!! Just keeps getting more and more stable as time goes on.
I recently, installed a new release of Debian 7 Wheezy (testing) after the freeze began. I like what I see with what the new Debian OS is becoming.
Third, but not least, is an original install of LMDE 201012 - upgraded to Sid (unstable). I find nothing lacking with 'unstable'. Pretty, fast, up-to-date and everything works, as they say with most MInt releases - out of the box.
I have installed several Window Managers with my LMDE-Sid install ... Gnome, Xfce, Openbox, Fluxbox, Awesome.
LMDE-Sid ... No problems with stability what-so-ever. Only real major change was not using Mint-Updater, as it can't keep up with updating Sid using the Terminal and the use of APT: Pinning in Preferences.
My LMDE-Sid install is quickly becoming my main OS-distro.
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Same here...vrkalak wrote: .... My LMDE-Sid install is quickly becoming my main OS-distro.
Not the slightest hint of a 'hiccup' since early last June.
http://forums.linuxmint.com/viewtopic.p ... 40#p593758
And that was fixed in hours.
I actually had more problems upgrading another partition from UP4 to UP5, that I have had running SID the last year.
That said, I would not recommend running SID, unless you keep a weekly clone, and do daily updates.
Most any xorg or kernel updates make re-installing Nvidia a 'given'..(for me). With SMXI/SGFXI that is a two minute job.
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Sid's been pretty mellow since wheezy got frozen. Is it the calm before the storm?
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Hi Squeezy
Possibly, but if you look at the first post (actual breakages), there have been very few problems in the past year. I suspect most of the new problems will come more from the new DE's (Cinnamon, Mate, Gnome 3.6, et) than actually from Debian SID.
XFCE (I updated to 4.10 from Experimental), and KDE 4.8 have been rock solid.
Anytime you see mass REMOVALS (and that hasn't happened in a long time), just wait a day or so, and the issue is usually resolved.
Just watch, just because we are saying this, SID will probably implode tomorrow.....
Possibly, but if you look at the first post (actual breakages), there have been very few problems in the past year. I suspect most of the new problems will come more from the new DE's (Cinnamon, Mate, Gnome 3.6, et) than actually from Debian SID.
XFCE (I updated to 4.10 from Experimental), and KDE 4.8 have been rock solid.
Anytime you see mass REMOVALS (and that hasn't happened in a long time), just wait a day or so, and the issue is usually resolved.
Just watch, just because we are saying this, SID will probably implode tomorrow.....
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
I have given up on http://http.debian.net for the time being. It did work fine for a while, then problems arose. It was causing me to have to run apt-get update over and over before it would complete correctly. The when I ran dist-upgrade it would constantly not find file, and have to be repeated over and over until it went through. I presume the cause of this is because the various repos do not all update at exactly the same time. I have reverted to the main repo and all the problems have gone.GregE wrote:Works fine for me, multi-arch and all.Regulus74 wrote:Has anyone tried the new Debian repo?
http://http.debian.net/
Anyone else have these issues? Maybe I am just in the "wrong" timezone.
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Here everything is ok.GregE wrote: Anyone else have these issues? Maybe I am just in the "wrong" timezone.
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Hey fellow Sidean's,
I have been away for awhile. Getting my system back running SID again.
This is my second computer change in the last 6 months. I think I am keeping this one for a while but you never know.
It is a Lenovo ThinkPad Edge E535.
Here are the specs:
I like trying all the DE that are available to run. Obviously on one machine this can be dangerous I guess with duplication of packages.
So right now I have Base XFCE and have added. Cinnamon , MATE, KDE.
All are somewhat working.
I had a problem with Cinnamon not starting properly. I was getting the Something went wrong box and only a desktop with Icons on it (no task bar).
I could go out to a terminal and type cinnamon -- replace and the task bar would come back.
I did some reading and found out where to put cinnamon --replace in a startup location and that works for loading Cinnamon.
However when I load MATE I get the MATE menu at the top and the Cinnamon Menu at the bottom. Kind of interesting way to work.
I don't really want the Cinnamon menu in MATE. It works ok but I don't need 2 menus.
I removed cinnamon --replace but it is still showing up.
Not sure where I need to get rid of it from.
Thanks for the help guys.
Glad to be back with the fun of SID.
I've gotten pretty good with rebuilding my system from time to time.
/home being on a separate partition is the way to go.
Dan
I have been away for awhile. Getting my system back running SID again.
This is my second computer change in the last 6 months. I think I am keeping this one for a while but you never know.
It is a Lenovo ThinkPad Edge E535.
Here are the specs:
Sources List as of right now:System: Host danc-e535 Kernel 3.2.0-4-amd64 x86_64 (64 bit) Distro Linux Mint Xfce Edition
CPU: Dual core AMD A4-4300M APU with Radeon HD Graphics (-MCP-) cache 2048 KB flags (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips 9981.8
Clock Speeds: (1) 1400.00 MHz (2) 1400.00 MHz
Graphics: Card Advanced Micro Devices [AMD] nee ATI Device 9992 X.Org 1.12.4 Res: 1366x768@60.0hz, 1440x900@59.9hz
GLX Renderer AMD Radeon HD 7420G GLX Version 4.2.11762 Compatibility Profile Context Direct Rendering Yes
Audio: Card-1 Advanced Micro Devices [AMD] nee ATI Device 9902 BusID: 00:01.1
Card-2 Advanced Micro Devices [AMD] Hudson Azalia Controller driver snd_hda_intel BusID: 00:14.2
Sound: Advanced Linux Sound Architecture Version 1.0.24
Network: Card-1 Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver r8169 v: 2.3LK-NAPI at port 2000 BusID: 01:00.0
Card-2 Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver rtl8192ce at port 1000 BusID: 02:00.0
Disks: HDD Total Size: 500.1GB (8.1% used) 1: /dev/sda WDC_WD5000BPKT 500.1GB
Partition: ID:/ size: 15G used: 7.4G (56%) fs: rootfs ID:/ size: 15G used: 7.4G (56%) fs: ext4
ID:/home size: 430G used: 38G (10%) fs: ext4 ID:swap-1 size: 15.96GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: N/A mobo: N/A gpu: 44.00C
Fan Speeds (in rpm): cpu: 0
Info: Processes 152 Uptime 49 min Memory 5077.1/7431.5MB Runlevel 2 Client Shell inxi 1.4.23
Ok now for my question:deb http://debian.linuxmint.com/latest testing main contrib non-free
deb http://mirror.csclub.uwaterloo.ca/linuxmint-packages/ debian main upstream import backport romeo
deb http://http.us.debian.org/debian/ unstable main contrib non-free #"SID"
deb http://www.deb-multimedia.org sid main non-free #"SID Multimedia"
I like trying all the DE that are available to run. Obviously on one machine this can be dangerous I guess with duplication of packages.
So right now I have Base XFCE and have added. Cinnamon , MATE, KDE.
All are somewhat working.
I had a problem with Cinnamon not starting properly. I was getting the Something went wrong box and only a desktop with Icons on it (no task bar).
I could go out to a terminal and type cinnamon -- replace and the task bar would come back.
I did some reading and found out where to put cinnamon --replace in a startup location and that works for loading Cinnamon.
However when I load MATE I get the MATE menu at the top and the Cinnamon Menu at the bottom. Kind of interesting way to work.
I don't really want the Cinnamon menu in MATE. It works ok but I don't need 2 menus.
I removed cinnamon --replace but it is still showing up.
Not sure where I need to get rid of it from.
Thanks for the help guys.
Glad to be back with the fun of SID.
I've gotten pretty good with rebuilding my system from time to time.
/home being on a separate partition is the way to go.
Dan
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Hi Dan.
I have a somewhat different setup. I basically use a different installation for each (not always ) desktop. (See my signature line). To avoid such problems.
Perhaps if you make a different user for each desktop, it will avoid your problems. Some autostart programs do not work well (or at all) for various desktops. Using Compiz with Gnome, KDE, as an example will crash. Compiz does work fine with XFCE, Mate.
Good Luck ..
I have a somewhat different setup. I basically use a different installation for each (not always ) desktop. (See my signature line). To avoid such problems.
Perhaps if you make a different user for each desktop, it will avoid your problems. Some autostart programs do not work well (or at all) for various desktops. Using Compiz with Gnome, KDE, as an example will crash. Compiz does work fine with XFCE, Mate.
Good Luck ..
Code: Select all
gene@zordon:~$ inxi -r
Repos: Active apt sources in file: /etc/apt/sources.list
deb [arch=amd64,i386] http://packages.linuxmint.com/ debian main upstream incoming backport romeo import
deb [arch=amd64,i386] http://http.us.debian.org/debian/ unstable main contrib non-free #"SID"
deb [arch=amd64,i386] http://www.deb-multimedia.org sid main non-free #"SID Multimedia"
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Gene,
Thanks for the reply.
Another thought I had was to use one of them as my main desktop , xfce, kde, whatever and Virtualbox the rest that I want to play with.
Mixing them all on one install even though I keep trying doesn't really work like you said.
Thanks
Dan
Thanks for the reply.
Another thought I had was to use one of them as my main desktop , xfce, kde, whatever and Virtualbox the rest that I want to play with.
Mixing them all on one install even though I keep trying doesn't really work like you said.
Thanks
Dan
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
I have another question I just thought of.
Can I Install the KDE version for LMDE and then change the sources to SID?
Thanks
Dan
Can I Install the KDE version for LMDE and then change the sources to SID?
Thanks
Dan
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
You can.dcihon wrote:I have another question I just thought of.
Can I Install the KDE version for LMDE and then change the sources to SID?
Thanks
Dan
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
Dan
It might be heresy around here, but if you avoid Cinnamon and Mate and Compiz, then you can run Gnome/KDE/Xfce simultaneously. If you avoid Compiz and thus desktop effects in Mate (maybe Cinnamon I have not used it for a while) then you probably could run the lot. I have Gnome 3.6, Xfce 4.10 and KDE 4.8.4 installed in parallel. I started with LMDE Xfce, removed Mint update repos and added testing and then Sid, then added Gnome and then KDE. I am now running Gnome from experimental, but might be a step too far for anyone who relies on a stable system. Maybe others can answer the question of whether or not Cinnamon will run without Compiz. You would probably be better to choose Cinnamon or Gnome and not run the two together as there is too much shared infrastructure.
Just the way I do it.
Greg
It might be heresy around here, but if you avoid Cinnamon and Mate and Compiz, then you can run Gnome/KDE/Xfce simultaneously. If you avoid Compiz and thus desktop effects in Mate (maybe Cinnamon I have not used it for a while) then you probably could run the lot. I have Gnome 3.6, Xfce 4.10 and KDE 4.8.4 installed in parallel. I started with LMDE Xfce, removed Mint update repos and added testing and then Sid, then added Gnome and then KDE. I am now running Gnome from experimental, but might be a step too far for anyone who relies on a stable system. Maybe others can answer the question of whether or not Cinnamon will run without Compiz. You would probably be better to choose Cinnamon or Gnome and not run the two together as there is too much shared infrastructure.
Just the way I do it.
Greg
Re: LMDE BREAKAGES - (Tracking SID!) - Jul 19th
I have no idea about MATE but Cinnamon is very similar to Gnome Shell so I'd think if you could run Gnome Shell you could run Cinnamon.