Long time to shutdown

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help
Post Reply
jerson
Level 3
Level 3
Posts: 168
Joined: Thu Dec 08, 2016 1:19 pm
Location: Bombay, India

Long time to shutdown

Post by jerson »

Greetings

Code: Select all

inxi -Fxzi
System:    Host: jerson-Compaq-510 Kernel: 4.15.0-39-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
           Distro: Linux Mint 18.3 Sylvia
Machine:   System: Hewlett-Packard product: Compaq 510 v: F.0D
           Mobo: Hewlett-Packard model: 308A v: KBC Version 26.08
           Bios: Hewlett-Packard v: 68PVU Ver. F.0D date: 12/17/2009
CPU:       Dual core Intel Core2 Duo T5870 (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 ssse3) bmips: 7980
           clock speeds: max: 2001 MHz 1: 1756 MHz 2: 1095 MHz
Graphics:  Card: Intel Mobile GME965/GLE960 Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.18.4 drivers: (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.10hz
           GLX Renderer: Mesa DRI Intel 965GME/GLE
           GLX Version: 2.1 Mesa 18.0.5 Direct Rendering: Yes
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.15.0-39-generic
Network:   Card-1: Realtek RTL8191SEvA Wireless LAN Controller
           driver: rtl8192se port: 6000 bus-ID: 10:00.0
           IF: wlp16s0 state: up mac: <filter>
           Card-2: Marvell 88E8042 PCI-E Fast Ethernet Controller
           driver: sky2 v: 1.30 port: 2000 bus-ID: 30:00.0
           IF: enp48s0 state: down mac: <filter>
           WAN IP: <filter> IF: enp48s0 ip-v4: N/A ip-v6: N/A
           IF: wlp16s0 ip-v4: <filter> ip-v6: <filter>
Drives:    HDD Total Size: 320.1GB (4.2% used)
           ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Partition: ID-1: / size: 102G used: 11G (12%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.14GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 44.0C mobo: 33.6C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 201 Uptime: 2 min Memory: 1213.9/2993.5MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35 
This is my laptop which is showing a shutdown time logo which seems to freeze for quite sometime(>30s) while I cannot ESCape or Alt-F1 into the terminal to see what's happening. Is there anyway I can check what is making it to shutdown so slowly?
Regards
Jerson

jerson
Level 3
Level 3
Posts: 168
Joined: Thu Dec 08, 2016 1:19 pm
Location: Bombay, India

Re: Long time to shutdown

Post by jerson »

a shutdown -f now from the terminal is just as slow. The LM logo appears, blinks and then waits on screen for quite a while before the system powers down.
Regards
Jerson

User avatar
MrEen
Level 18
Level 18
Posts: 8088
Joined: Mon Jun 12, 2017 8:39 pm

Re: Long time to shutdown

Post by MrEen »

Hi jerson.

If you use Chromium, see this post for a possible solution.

Good luck.

jerson
Level 3
Level 3
Posts: 168
Joined: Thu Dec 08, 2016 1:19 pm
Location: Bombay, India

Re: Long time to shutdown

Post by jerson »

I tried the DefaultTimeoutStopSec=10. No change. I don't know if this information helps anyone diagnose the problem. When the shutdown logo appears, it flashes after the 1st dot and freezes with the second dot green turned on. Remaining 3 dots remain white. Dots referred to are under the LM logo.
Regards
Jerson

Post Reply

Return to “Newbie Questions”