After upgrade from LMDE 4 to LMDE 5 (fresh install in fact) I had to change the VNC server setup from vnc4server (oldstable,now 4.1.1+X4.3.0+t-1 amd64) who works on LMDE 4, to tigervnc (stable,now 1.11.0+dfsg-2+deb11u1 amd64) because the first one is no longer available on LMDE 5.
It seems that all paquets are installed
Code: Select all
sudo apt list --installed | grep vnc
tigervnc-common/stable,now 1.11.0+dfsg-2+deb11u1 amd64 [installé, automatique]
tigervnc-scraping-server/stable,now 1.11.0+dfsg-2+deb11u1 amd64 [installé]
tigervnc-standalone-server/stable,now 1.11.0+dfsg-2+deb11u1 amd64 [installé]
Code: Select all
x0vncserver -list
TigerVNC server sessions:
X DISPLAY # RFB PORT # PROCESS ID SERVER
:0 5900 848 X0tigervnc
Code: Select all
ps -ef | grep vnc
##### 847 1 0 21:12 ? 00:00:00 /usr/bin/perl /usr/bin/x0tigervncserver -passwordfile ~/.vnc/passwd -display :0 -geometry 1600x900+0+0
##### 848 847 0 21:12 ? 00:00:00 /usr/bin/X0tigervnc -display :0 -rfbport 5900 -localhost=1 -SecurityTypes VncAuth -PasswordFile ~/.vnc/passwd -ClientWaitTimeMillis 30000 -Geometry 1600x900+0+0
~ 10459 1698 0 22:32 pts/0 00:00:00 grep vnc
Here's the machine détails
Code: Select all
System: Kernel: 5.10.0-21-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 Console: tty 0 DM: LightDM 1.26.0
Distro: LMDE 5 Elsie base: Debian 11.2 bullseye
Machine: Type: Laptop System: LENOVO product: 2349P25 v: ThinkPad T430 serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: LENOVO model: 2349P25 serial: <filter> UEFI: LENOVO v: G1ETC2WW (2.82 ) date: 08/07/2019
CPU: Info: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP arch: Ivy Bridge rev: 9 L2 cache: 3 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20751
Speed: 1784 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1784 2: 1695 3: 2042 4: 2630
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:0166 class ID: 0300
Device-2: Chicony thinkpad t430s camera type: USB driver: uvcvideo bus ID: 1-1.6:5 chip ID: 04f2:b2da
class ID: 0e02
Display: server: X.org 1.20.11 driver: loaded: modesetting unloaded: fbdev,vesa tty: 173x55
Message: Advanced graphics data unavailable in console. Try -G --display
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
bus ID: 00:1b.0 chip ID: 8086:1e20 class ID: 0403
Sound Server: ALSA v: k5.10.0-21-amd64
Network: Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e v: kernel port: 5080 bus ID: 00:19.0
chip ID: 8086:1502 class ID: 0200
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel port: efa0 bus ID: 03:00.0
chip ID: 8086:0085 class ID: 0280
IF: wlp3s0 state: down mac: <filter>
Bluetooth: Device-1: Broadcom BCM20702 Bluetooth 4.0 [ThinkPad] type: USB driver: btusb v: 0.8 bus ID: 1-1.4:4
chip ID: 0a5c:21e6 class ID: fe01 serial: <filter>
Report: ID: hci0 state: up running bt-v: 2.1 lmp-v: 4.0 sub-v: 220e hci-v: 4.0 rev: 1000 address: <filter>
Drives: Local Storage: total: 447.13 GiB used: 7.4 GiB (1.7%)
ID-1: /dev/sda vendor: SanDisk model: SDSSDXPS480G size: 447.13 GiB speed: 6.0 Gb/s rotation: SSD serial: <filter>
rev: 00RL scheme: GPT
Partition: ID-1: / size: 29.36 GiB used: 7.4 GiB (25.2%) fs: ext4 dev: /dev/sda3
ID-2: /boot/efi size: 252 MiB used: 5.7 MiB (2.3%) fs: vfat dev: /dev/sda1
Swap: ID-1: swap-1 type: partition size: 1024 MiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
Sensors: System Temperatures: cpu: 31.0 C mobo: 0.0 C
Fan Speeds (RPM): cpu: 0
Info: Processes: 187 Uptime: 22m wakeups: 1 Memory: 7.6 GiB used: 1011.2 MiB (13.0%) Init: systemd v: 247 runlevel: 5
Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 2046 Shell: Bash v: 5.1.4 running in: tty 0 (SSH) inxi: 3.3.01
I not an expert, but also not a full newbie, plus I followed a couple of How To for Debian 11 to try some things, but nothing's working.
So any help will be appreciate, I can do/try everything on the machine since it's just for test up to I figure how to make it works.