It defaults to the Home folder. However, I don't use that, and would prefer to make it open by default to my data drive (a separate SSD).
Is there a setting I can change to get it to open with a display of a location of my choosing? I looked through the Preferences and am surprised it isn't just some obvious option in there.
Thanks!
Code: Select all
System:
Kernel: 5.15.0-72-generic x86_64 bits: 64 compiler: gcc v: 11.3.0 Desktop: Cinnamon 5.6.8
tk: GTK 3.24.33 wm: muffin dm: LightDM Distro: Linux Mint 21.1 Vera base: Ubuntu 22.04 jammy
Machine:
Type: Desktop Mobo: Micro-Star model: MAG B550M MORTAR WIFI (MS-7C94) v: 1.0
serial: <superuser required> UEFI: American Megatrends LLC. v: 1.D0 date: 08/17/2022
CPU:
Info: 6-core model: AMD Ryzen 5 5600X bits: 64 type: MT MCP arch: Zen 3 rev: 2 cache:
L1: 384 KiB L2: 3 MiB L3: 32 MiB
Speed (MHz): avg: 2642 high: 3015 min/max: 2200/3700 boost: enabled cores: 1: 2879 2: 2877
3: 2226 4: 2477 5: 2241 6: 2261 7: 2878 8: 2880 9: 2882 10: 3015 11: 2488 12: 2609
bogomips: 88796
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3060 Ti Lite Hash Rate] driver: nvidia v: 525.105.17 pcie:
speed: 2.5 GT/s lanes: 16 ports: active: none off: DP-4 empty: DP-1, DP-2, DP-3, HDMI-A-1
bus-ID: 2b:00.0 chip-ID: 10de:2489
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 108
Monitor-1: DP-2.8 res: 2560x1440 dpi: 109 diag: 685mm (27")
OpenGL: renderer: NVIDIA GeForce RTX 3060 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 525.105.17
direct render: Yes
Audio:
Device-1: NVIDIA GA104 High Definition Audio driver: snd_hda_intel v: kernel pcie:
speed: 16 GT/s lanes: 16 bus-ID: 2b:00.1 chip-ID: 10de:228b
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: speed: 16 GT/s lanes: 16 bus-ID: 2d:00.4 chip-ID: 1022:1487
Sound Server-1: ALSA v: k5.15.0-72-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
bus-ID: 29:00.0 chip-ID: 8086:2723
IF: wlo1 state: up mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169 v: kernel pcie:
speed: 5 GT/s lanes: 1 port: f000 bus-ID: 2a:00.0 chip-ID: 10ec:8125
IF: enp42s0 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-9:8 chip-ID: 8087:0029
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
hardware: no software: yes address: <filter>
Drives:
Local Storage: total: 4.34 TiB used: 1.06 TiB (24.4%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVL2512HCJQ-00B00 size: 476.94 GiB speed: 63.2 Gb/s
lanes: 4 serial: <filter> temp: 36.9 C
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 250GB size: 232.89 GiB
speed: 31.6 Gb/s lanes: 4 serial: <filter> temp: 26.9 C
ID-3: /dev/sda vendor: Seagate model: ST4000DM004-2CV104 size: 3.64 TiB speed: 6.0 Gb/s
serial: <filter>
ID-4: /dev/sdb type: USB vendor: Hitachi model: HTC Android Phone size: 7.4 GiB
serial: <filter>
Partition:
ID-1: / size: 467.89 GiB used: 79.2 GiB (16.9%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 40 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Repos:
Packages: 2671 apt: 2662 flatpak: 9
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/bablu-boy-nutty-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/bablu-boy-nutty-jammy.gpg] https: //ppa.launchpadcontent.net/bablu-boy/nutty/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https: //brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb https: //mirrors.ukfast.co.uk/sites/linuxmint.com/packages vera main upstream import backport
2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
No active apt repos in: /etc/apt/sources.list.d/steam-beta.list
Active apt repos in: /etc/apt/sources.list.d/steam-stable.list
1: deb [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https: //repo.steampowered.com/steam/ stable steam
2: deb-src [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https: //repo.steampowered.com/steam/ stable steam
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] https: //repo.vivaldi.com/stable/deb/ stable main
Info:
Processes: 330 Uptime: 5h 21m Memory: 31.27 GiB used: 2.63 GiB (8.4%) Init: systemd v: 249
runlevel: 5 Compilers: gcc: 11.3.0 alt: 11/12 Client: Cinnamon v: 5.6.8 inxi: 3.3.13
