Hi all,
I'm trying to copy/paste file name under List View of the nemo file manager.
After using the F2 key, it goes to rename mode and I can type normally. However, whenever I press the Ctrl key on my keyboard, it abandons whatever I've typed, reverts back to the original file name and exits the edit mode.
Is this a known issue? Is there any way around it?
P.S. It has no issue in Icon View or Compact View.
Not sure if this image helps, but this is how the List View looks like:
Edited:
SOLUTION:
Go to Mouse and Touchpad settings, disable the following settings:
Show position of pointer when the Control key is pressed
In folder List View, cannot copy or paste file name[SOLVED]
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
In folder List View, cannot copy or paste file name[SOLVED]
Last edited by LockBot on Wed Nov 29, 2023 11:00 pm, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: In folder List View, cannot copy or paste file name
Hello and welcome to the forum.
Highlight the file, don't press F2, but just do a Ctrl-C in the non-edit mode. Do you get the full filename and path?
No, it is not. On my LM 20.3 it works perfectly. After doing Ctrl-C Nemo stays in edit mode, but going to a text file and clicking Ctrl-V places the filename in the document.Is this a known issue?
Highlight the file, don't press F2, but just do a Ctrl-C in the non-edit mode. Do you get the full filename and path?
Re: In folder List View, cannot copy or paste file name
I wonder if you have a hotkey that is set close enough and/or you were accidentally having a pudgy finger moment.After using the F2 key, it goes to rename mode and I can type normally. However, whenever I press the Ctrl key on my keyboard, it abandons whatever I've typed, reverts back to the original file name and exits the edit mode.
Is this a known issue? Is there any way around it?
I just tried LM 21.1 cinnamon's Nemo's list view, created a new text file, hit F2, type a random name, then ctrl+c, opened a blank Gedit ( gui text editor) window, and successfully pasted that random name in it. (shrugs).
Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: In folder List View, cannot copy or paste file name
@mikeflan @motoryzen
Thank you for testing it! I figured out the issue.
After reading @motoryzen 's comment:
Now it's working perfectly! Once again, thank you for your help!
Thank you for testing it! I figured out the issue.
After reading @motoryzen 's comment:
I immediately thought of this Mouse and Touchpad setting and turned it off.I wonder if you have a hotkey that is set close enough and/or you were accidentally having a pudgy finger moment.
Now it's working perfectly! Once again, thank you for your help!