hoe werk ik met libreoffice basic(solved)
Moderator: Moem
Forum rules
Topics in this forum are automatically closed 6 months after creation.
Topics in this forum are automatically closed 6 months after creation.
hoe werk ik met libreoffice basic(solved)
ik heb veel gewerkt met ms-access onder windows en zoek onder linux iets vergelijkbaars.Merkwaardig echter dat onder programmabeheer/programmeren niets staat over libreoffice basic.Hoewel...
Als ik daar naar zoek, vind ik allerlei bestanden, zoals LibreOffic_7.5.4_Linux_x86-64-langpack-nl.tar-gz.torrent. Maar wat moet ik hier mee,wil ik aan de slag?
Als ik daar naar zoek, vind ik allerlei bestanden, zoals LibreOffic_7.5.4_Linux_x86-64-langpack-nl.tar-gz.torrent. Maar wat moet ik hier mee,wil ik aan de slag?
Last edited by LockBot on Sun Dec 10, 2023 11:00 pm, edited 3 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: hoe werk ik met libreoffice basic
Libreoffice base is al standaard geïnstalleerd in Mint en kun je terug vinden onder "kantoor" en "Libreoffice"
Re: hoe werk ik met libreoffice basic
ik zocht basic en niet base
Re: hoe werk ik met libreoffice basic
Ik gebruik LibreOffice niet in het Nederlands maar in het Engels doe je het volgens mij via Tools > Macros menu. B.v. Edit Macros om macros te maken. Dit menu zit in elk LibreOffice programma. De online hulp kan van pas komen: https://help.libreoffice.org/6.1/nl/tex ... n0601.html
Re: hoe werk ik met libreoffice basic
Dit menu zit in elk LibreOffice programma? Ik zie het niet. En klik op Voltooien om verder te gaanIk zie ook geen knop Voltooien Vermoedelijk is mijn scherminstelling onjuist. Maar hoe verander ik die?xenopeek wrote: ⤴Sat Jun 10, 2023 12:48 pm Ik gebruik LibreOffice niet in het Nederlands maar in het Engels doe je het volgens mij via Tools > Macros menu. B.v. Edit Macros om macros te maken. Dit menu zit in elk LibreOffice programma. De online hulp kan van pas komen: https://help.libreoffice.org/6.1/nl/tex ... n0601.html
Re: hoe werk ik met libreoffice basic
Zit onder het menu onderdeel extra
Menu extra -> macros -> macros beheren -> basic
Menu extra -> macros -> macros beheren -> basic
Re: hoe werk ik met libreoffice basic
ik zie in het menu geen onderdeel extra. Hier mijn systeem-info
Code: Select all
System:
Kernel: 5.15.0-73-generic x86_64 bits: 64 compiler: gcc v: 11.3.0 Desktop: Cinnamon 5.6.8
tk: GTK 3.24.33 wm: muffin dm: LightDM Distro: Linux Mint 21.1 Vera base: Ubuntu 22.04 jammy
Machine:
Type: Laptop System: Dell product: Latitude E5440 v: 00 serial: <superuser required> Chassis:
type: 9 serial: <superuser required>
Mobo: Dell model: 0RT36Y v: A00 serial: <superuser required> UEFI: Dell v: A24
date: 06/13/2019
Battery:
ID-1: BAT0 charge: 58.2 Wh (100.0%) condition: 58.2/99.9 Wh (58.3%) volts: 12.6 min: 11.1
model: SMP DELL 45HHN33 serial: <filter> status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M315/235/317 serial: <filter>
charge: 100% (should be ignored) status: Discharging
CPU:
Info: dual core model: Intel Core i5-4200U bits: 64 type: MT MCP arch: Haswell rev: 1 cache:
L1: 128 KiB L2: 512 KiB L3: 3 MiB
Speed (MHz): avg: 807 high: 835 min/max: 800/2600 cores: 1: 835 2: 798 3: 799 4: 798
bogomips: 18358
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Dell driver: i915 v: kernel ports:
active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a16
Device-2: Sunplus Innovation Laptop_Integrated_Webcam_HD type: USB driver: uvcvideo
bus-ID: 1-1.6:3 chip-ID: 1bcf:2984
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting unloaded: fbdev,vesa
gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1280x720 s-dpi: 96
Monitor-1: eDP-1 model: BOE Display res: 1280x720 dpi: 105 diag: 354mm (13.9")
OpenGL: renderer: Mesa Intel HD Graphics 4400 (HSW GT2) v: 4.6 Mesa 22.2.5 direct render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c
Device-2: Intel 8 Series HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20
Sound Server-1: ALSA v: k5.15.0-73-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel Ethernet I218-LM vendor: Dell driver: e1000e v: kernel port: f080
bus-ID: 00:19.0 chip-ID: 8086:155a
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel pcie: speed: 2.5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 8086:08b1
IF: wlp2s0 state: up mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-1.8.2:5
chip-ID: 8087:07dc
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 500
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 bus-ID: 00:1f.2
chip-ID: 8086:282a
Drives:
Local Storage: total: 689.3 GiB used: 140.24 GiB (20.3%)
ID-1: /dev/sda vendor: Kingston model: SA400S37240G size: 223.57 GiB speed: 6.0 Gb/s
serial: <filter>
ID-2: /dev/sdb type: USB vendor: Western Digital model: WD Elements 10B8 size: 465.73 GiB
serial: <filter>
Partition:
ID-1: / size: 100.46 GiB used: 51.59 GiB (51.4%) fs: ext4 dev: /dev/sda5
ID-2: /boot/efi size: 96 MiB used: 31.1 MiB (32.4%) fs: vfat dev: /dev/sda1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 46.0 C mobo: 36.0 C sodimm: SODIMM C
Fan Speeds (RPM): cpu: 3031
Repos:
Packages: 2315 apt: 2305 flatpak: 10
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb https: //mintlinux.mirror.wearetriple.com/packages vera main upstream import backport
2: deb http: //ftp.snt.utwente.nl/pub/os/linux/ubuntu jammy main restricted universe multiverse
3: deb http: //ftp.snt.utwente.nl/pub/os/linux/ubuntu jammy-updates main restricted universe multiverse
4: deb http: //ftp.snt.utwente.nl/pub/os/linux/ubuntu jammy-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Info:
Processes: 237 Uptime: 2h 3m Memory: 7.67 GiB used: 1.42 GiB (18.6%) Init: systemd v: 249
runlevel: 5 Compilers: gcc: 11.3.0 alt: 11/12 Client: Cinnamon v: 5.6.8 inxi: 3.3.13
Last edited by Moem on Sun Jun 11, 2023 5:08 am, edited 1 time in total.
Reason: Toevoegen van [code] [/code] markeringen maakt je systeeminformatie beter leesbaar.
Reason: Toevoegen van [code] [/code] markeringen maakt je systeeminformatie beter leesbaar.
Re: hoe werk ik met libreoffice basic
Kijk je in het menu van je besturingssysteem of in het menu van Libre Office? Ik denk dat hier het tweede bedoeld wordt, niet het eerste.
If your issue is solved, kindly indicate that by editing the first post in the topic, and adding [SOLVED] to the title. Thanks!
Re: hoe werk ik met libreoffice basic
ja,gezien