Canon ImageRunner 1025N
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Canon ImageRunner 1025N
Hello, I need help, I need to install this multifunction printer in Linux mint 21.1, the problem is the following, I can get it to print but I can't scan. If someone could help me, thank you.
Re: Canon ImageRunner 1025N
SANE says support for this device is complete; ie works straightaway http://sane-project.org/sane-mfgs.html#Z-CANON
I use X-Sane for scanning; it is available through Synaptic; (is this language that you speak?)
when I turn on X-Sane, with a scanner, it searches and identifies any scanners it can see; you generally select the top of that list; then proceed to the scanning programme
please ask for any detailed help for any bit that is not clear
when I turn on X-Sane, with a scanner, it searches and identifies any scanners it can see; you generally select the top of that list; then proceed to the scanning programme
please ask for any detailed help for any bit that is not clear
Re: Canon ImageRunner 1025N
ok thanks, on Monday I'm going to try it and let you know
Re: Canon ImageRunner 1025N
Bueno te cuento,instale el xsane pero igual me dice..no hay dispositivos disponibles...
Al correr el comando sane-find-scanner, me da esto como respuesta...un detalle el equipo es 1025 pero lo reconoce como lo ves aqui:
root@nl4:/home/supervisor# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found possible USB scanner (vendor=0x04a9 [Canon,Inc.], product=0x269d [iR1018/1022/1023]) at libusb:001:008
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.023]) at libusb:001:008
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Al correr el comando sane-find-scanner, me da esto como respuesta...un detalle el equipo es 1025 pero lo reconoce como lo ves aqui:
root@nl4:/home/supervisor# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found possible USB scanner (vendor=0x04a9 [Canon,Inc.], product=0x269d [iR1018/1022/1023]) at libusb:001:008
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.023]) at libusb:001:008
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.