Ständig gehen Maus oder/und Tastatur nicht!!

Support-Forum für deutschsprachige Benutzer

Moderator: karlchen

Forum rules
Topics in this forum are automatically closed 6 months after creation.
Post Reply
User avatar
corado
Level 1
Level 1
Posts: 46
Joined: Thu Mar 14, 2024 1:59 pm
Location: Germany, Lower Saxony

Ständig gehen Maus oder/und Tastatur nicht!!

Post by corado »

Auf zwei meiner Geräte, habe ich laufend das Problem, das nach dem Aufwachen aus einem Energiesparmodus Tastatur und doer Maus nicht funktionieren.
Das Touchpat konnte ich das letzte mal im Betrieb zum laufen bringen indem ich in das Kontextmenü nochmal von touch auf Maus und zurück geschaltet hatte, bei der Tastatur geht das aber nicht und kann ja auch kaum eine Lösung sein!!
Im Netz liest man, das dieses problem völlig "normal" bei Debian basierten Distributionen ist!?!?
ICh dachte, das tolle an Linux ist, wenn es Probleme gibt, dass diese in der Regel schnell behoben werden.
Das Problem existiert aber wohl schon JAHRE!! und darf man wohl als schwerwiegend bezeichnen.

Kann man das beheben oder geht es nur mit dem Wechsel des Betriebssystems?!
Das wäre bei mir dann aber nun doch mal wieder kein Linux....da ich hier irgendwie bislang nur NAch als Vorteile sehe :-(
LM XFCE / Cianamon
User avatar
Pjotr
Level 24
Level 24
Posts: 20142
Joined: Mon Mar 07, 2011 10:18 am
Location: The Netherlands (Holland) 🇳🇱
Contact:

Re: Ständig gehen Maus oder/und Tastatur nicht!!

Post by Pjotr »

Genau welche Stromsparmodus: suspend-to-ram oder suspend-to-disk?

Und was sagt:

Code: Select all

inxi -Fxxxpmrz
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
User avatar
corado
Level 1
Level 1
Posts: 46
Joined: Thu Mar 14, 2024 1:59 pm
Location: Germany, Lower Saxony

Re: Ständig gehen Maus oder/und Tastatur nicht!!

Post by corado »

Wie gesagt, auf midnestens 2 völlig unterschiedlichen Systemen, mit absolut keiner Gemeinsamkeit

Code: Select all

$ inxi -Fxxxpmrz
System:
  Kernel: 5.15.0-101-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
    Desktop: Cinnamon 5.8.4 tk: GTK 3.24.33 wm: muffin vt: 7 dm: LightDM 1.30.0
    Distro: Linux Mint 21.2 Victoria base: Ubuntu 22.04 jammy
Machine:
  Type: Laptop System: Dell product: Latitude E6540 v: 00
    serial: <superuser required> Chassis: type: 9 serial: <superuser required>
  Mobo: Dell model: 05V0V4 v: A00 serial: <superuser required> BIOS: Dell
    v: A27 date: 06/13/2019
Battery:
  ID-1: BAT0 charge: 22.4 Wh (100.0%) condition: 22.4/66.6 Wh (33.6%)
    volts: 12.3 min: 11.1 model: SMP DELL HTX4D2A type: Li-ion serial: <filter>
    status: Full
Memory:
  RAM: total: 15.52 GiB used: 4.09 GiB (26.4%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: dual core model: Intel Core i5-4310M bits: 64 type: MT MCP
    smt: enabled arch: Haswell rev: 3 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB
  Speed (MHz): avg: 1549 high: 1734 min/max: 800/3400 cores: 1: 1152
    2: 1614 3: 1698 4: 1734 bogomips: 21551
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: Dell
    driver: i915 v: kernel ports: active: HDMI-A-1 off: eDP-1
    empty: DP-1, DP-2, HDMI-A-2, HDMI-A-3, VGA-1 bus-ID: 00:02.0
    chip-ID: 8086:0416 class-ID: 0300
  Device-2: Microdia Integrated Webcam type: USB driver: uvcvideo
    bus-ID: 1-1.5:3 chip-ID: 0c45:64d0 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
    unloaded: fbdev,vesa gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x318mm (20.0x12.5")
    s-diag: 599mm (23.6")
  Monitor-1: HDMI-1 mapped: HDMI-A-1 model: Asus BE24A serial: <filter>
    res: 1920x1200 hz: 60 dpi: 94 size: 518x324mm (20.4x12.8")
    diag: 611mm (24.1") modes: max: 1920x1200 min: 640x480
  OpenGL: renderer: Mesa Intel HD Graphics 4600 (HSW GT2)
    v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
    vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:03.0
    chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Dell
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
    class-ID: 0403
  Sound Server-1: ALSA v: k5.15.0-101-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Ethernet I217-LM vendor: Dell driver: e1000e v: kernel
    port: f080 bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
  IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
  Device-2: Intel Centrino Advanced-N 6235 driver: iwlwifi v: kernel pcie:
    speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:088e class-ID: 0280
  IF: wlp3s0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel Centrino Bluetooth Wireless Transceiver type: USB
    driver: btusb v: 0.8 bus-ID: 2-1.5:3 chip-ID: 8087:07da class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter>
    bt-v: 2.1 lmp-v: 4.0 sub-v: fc00 hci-v: 4.0 rev: 1ebd
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
    v: 3.0 port: f060 bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A
    class-ID: 0104
Drives:
  Local Storage: total: 1.82 TiB used: 170.28 GiB (9.1%)
  ID-1: /dev/sda vendor: Samsung model: SSD 870 EVO 2TB size: 1.82 TiB
    speed: 6.0 Gb/s type: SSD serial: <filter> rev: 3B6Q scheme: MBR
Partition:
  ID-1: / size: 661.49 GiB used: 170.27 GiB (25.7%) fs: ext4 dev: /dev/sda5
  ID-2: /boot/efi size: 512 MiB used: 11.7 MiB (2.3%) fs: vfat
    dev: /dev/sda3
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 1024 KiB (0.0%) priority: -2
    file: /swapfile
Sensors:
  System Temperatures: cpu: 49.0 C mobo: 47.0 C sodimm: SODIMM C
  Fan Speeds (RPM): cpu: 3207
Repos:
  Packages: 3062 apt: 3020 flatpak: 42
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http://linux-mint.froonix.org victoria main upstream import backport
    2: deb http://artfiles.org/ubuntu.com jammy main restricted universe multiverse
    3: deb http://artfiles.org/ubuntu.com jammy-updates main restricted universe multiverse
    4: deb http://artfiles.org/ubuntu.com jammy-backports main restricted universe multiverse
    5: deb http://security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
  Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
    1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info:
  Processes: 338 Uptime: 1h 35m wakeups: 1 Init: systemd v: 249 runlevel: 5
  Compilers: gcc: 11.4.0 alt: 11/12 Shell: Bash v: 5.1.16
  running-in: gnome-terminal inxi: 3.3.13
Last edited by karlchen on Mon Mar 25, 2024 6:50 pm, edited 1 time in total.
Reason: inxi Kommando und Ausgabe in [code] [/code] Tags eingefaßt, erhält die inxi Ausgabeformatierung
LM XFCE / Cianamon
Post Reply

Return to “Deutsch - German”